CS6 Interface is unresponsive and really slow when using lots of layers on OSX 10.8

I have a simple project, using lots of layers, but no effects. It takes more than a minute for the project to open, after which the interface becomes slow and unresponsive and doing anything in general is a pain.
I've tried changing settings relating to multi-processing. Currently I have 1.5 GB assigned to each core and it tells me it can use 7 cores as a result. I've assigned 13 out of the 16GB or RAM I have for after effects. Caching is also enabled.
The only thing I can think of is I can't enable the GPU for rendering as I have a NVIDIA GeForce GT 650M with 512M of VRAM. Is this the problem, or is there something else I can try/do differently?

MP is not going to help. Reset your preferences to the defaults. Make sure AE is up to date. There have been several bug fixes. Give that a try. If it's still slow please tell us what you are using as footage and give us some details about the size of your comp. Some footage is harder to interpret than other. One last question, what is lot's of layers? 15, 150, 1500?

Similar Messages

My internet is really slow when others are using i...

Hey my internet is really slow when other people use it.
Also it is a problem when i'm xbox live, i'll be playing a game and when someone else in the house is on BBC i player, it skips like mad and its so frustrating to play on, in fact its unplayable.
I just want to know if there is a way to fix this,
I have BT broadband and i have the black hub.
I have no ideas about computers and internet so i really dont know what to do about this!
any help would be much appreciated, thank you xx

thank you,
here are my results from the hub;
ADSL line status
Connection Information
Line state Connected
Connection time 7 days, 00:33:53
Downstream 1,824 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 14.8 dB / 14.0 dB
Line attenuation (Down/Up) 55.7 dB / 31.5 dB
Output power (Down/Up) 2.8 dBm / 1.3 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 1627 / 261
CRC Errors (Down/Up) 385 / 189
HEC Errors (Down/Up) 1544 / 147
Error Seconds (Local/Remote) 279 / 95
and here are my results from the speed test
1. Best Effort Test: -provides background information.
Download Speed
1143 Kbps
0 Kbps 2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1143 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1824 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 12.94:24.68:62.38 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
364 Kbps
0 Kbps 448 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 364 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

HP Photosmart 8750 prints slow when using Photo Gray Cartidge

HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

Welcome to the HP Forums ButchG,
I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
I can help you with this issue.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
Hold down the power button for 10 seconds to drain the power.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for the cleaning the contacts and reseating the cartridge.
'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
What are the ink levels?
Are you using Genuine HP Cartridges?
Check the date on the cartridges to make sure they are still in warranty. (not old stock)
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Query runs slower when using variables & faster when using hard coded value

Hi,
My query runs slower when i use variables but it runs faster when i use hard coded values. Why it is behaving like this ?
My query is in cursor definition in a procedure. Procedure runs faster when using hard coded valus and slower when using variables.
Can anybody help me out there?
Thanks in advance.

Hi,
Thanks for ur reply.
here is my code with Variables:
Procedure populateCountryTrafficDetails(pWeekStartDate IN Date , pCountry IN d_geography.country_code%TYPE) is
startdate date;
AR_OrgId number(10);
Cursor cTraffic is
Select
          l.actual_date, nvl(o.city||o.zipcode,'Undefined') Site,
          g.country_code,d.customer_name, d.customer_number,t.contrno bcn,
          nvl(r.dest_level3,'Undefined'),
          Decode(p.Product_code,'820','821','821','821','801') Product_Code ,
          Decode(p.Product_code,'820','Colt Voice Connect','821','Colt Voice Connect','Colt Voice Line') DProduct,
          sum(f.duration),
          sum(f.debamount_eur)
          from d_calendar_date l,
          d_geography g,
          d_customer d, d_contract t, d_subscriber s,
          d_retail_dest r, d_product p,
          CPS_ORDER_DETAILS o,
          f_retail_revenue f
          where
          l.date_key = f.call_date_key and
          g.geography_key = f.geography_key and
          r.dest_key = f.dest_key and
          p.product_key = f.product_key and
          --c.customer_key = f.customer_key and
          d.customer_key = f.customer_key and
          t.contract_key = f.contract_key and
          s.SUBSCRIBER_KEY = f.SUBSCRIBER_KEY and
          o.org_id(+) = AR_OrgId and
          g.country_code = pCountry and
          l.actual_date >= startdate and
          l.actual_date <= (startdate + 90) and
          o.cli(+) = s.area_subno and
          p.product_code in ('800','801','802','804','820','821')
          group by
          l.actual_date,
          o.city||o.zipcode, g.country_code,d.customer_name, d.customer_number,t.contrno,r.dest_level3, p.product_code;
Type CountryTabType is Table of country_traffic_details.Country%Type index by BINARY_INTEGER;
Type CallDateTabType is Table of country_traffic_details.CALL_DATE%Type index by BINARY_INTEGER;
Type CustomerNameTabType is Table of Country_traffic_details.Customer_name%Type index by BINARY_INTEGER;
Type CustomerNumberTabType is Table of Country_traffic_details.Customer_number%Type index by BINARY_INTEGER;
Type BcnTabType is Table of Country_traffic_details.Bcn%Type index by BINARY_INTEGER;
Type DestinationTypeTabType is Table of Country_traffic_details.DESTINATION_TYPE%Type index by BINARY_INTEGER;
Type ProductCodeTabType is Table of Country_traffic_details.Product_Code%Type index by BINARY_INTEGER;
Type ProductTabType is Table of Country_traffic_details.Product%Type index by BINARY_INTEGER;
Type DurationTabType is Table of Country_traffic_details.Duration%Type index by BINARY_INTEGER;
Type DebamounteurTabType is Table of Country_traffic_details.DEBAMOUNTEUR%Type index by BINARY_INTEGER;
Type SiteTabType is Table of Country_traffic_details.Site%Type index by BINARY_INTEGER;
CountryArr CountryTabType;
CallDateArr CallDateTabType;
Customer_NameArr CustomerNameTabType;
CustomerNumberArr CustomerNumberTabType;
BCNArr BCNTabType;
DESTINATION_TYPEArr DESTINATIONTYPETabType;
PRODUCT_CODEArr PRODUCTCODETabType;
PRODUCTArr PRODUCTTabType;
DurationArr DurationTabType;
DebamounteurArr DebamounteurTabType;
SiteArr SiteTabType;
Begin
     startdate := (trunc(pWeekStartDate) + 6) - 90;
     Exe_Pos := 1;
     Execute Immediate 'Truncate table country_traffic_details';
     dropIndexes('country_traffic_details');
     Exe_Pos := 2;
     /* Set org ID's as per AR */
     case (pCountry)
     when 'FR' then AR_OrgId := 81;
     when 'AT' then AR_OrgId := 125;
     when 'CH' then AR_OrgId := 126;
     when 'DE' then AR_OrgId := 127;
     when 'ES' then AR_OrgId := 123;
     when 'IT' then AR_OrgId := 122;
     when 'PT' then AR_OrgId := 124;
     when 'BE' then AR_OrgId := 132;
     when 'IE' then AR_OrgId := 128;
     when 'DK' then AR_OrgId := 133;
     when 'NL' then AR_OrgId := 129;
     when 'SE' then AR_OrgId := 130;
     when 'UK' then AR_OrgId := 131;
     else raise_application_error (-20003, 'No such Country Code Exists.');
     end case;
     Exe_Pos := 3;
dbms_output.put_line('3: '||to_char(sysdate, 'HH24:MI:SS'));
     populateOrderDetails(AR_OrgId);
dbms_output.put_line('4: '||to_char(sysdate, 'HH24:MI:SS'));
     Exe_Pos := 4;
     Open cTraffic;
     Loop
     Exe_Pos := 5;
     CallDateArr.delete;
FETCH cTraffic BULK COLLECT
          INTO CallDateArr, SiteArr, CountryArr, Customer_NameArr,CustomerNumberArr,
          BCNArr,DESTINATION_TYPEArr,PRODUCT_CODEArr, PRODUCTArr, DurationArr, DebamounteurArr LIMIT arraySize;
          EXIT WHEN CallDateArr.first IS NULL;
               Exe_pos := 6;
                    FORALL i IN 1..callDateArr.last
                    insert into country_traffic_details
                    values(CallDateArr(i), CountryArr(i), Customer_NameArr(i),CustomerNumberArr(i),
                    BCNArr(i),DESTINATION_TYPEArr(i),PRODUCT_CODEArr(i), PRODUCTArr(i), DurationArr(i),
                    DebamounteurArr(i), SiteArr(i));
                    Exe_pos := 7;
dbms_output.put_line('7: '||to_char(sysdate, 'HH24:MI:SS'));
     EXIT WHEN ctraffic%NOTFOUND;
END LOOP;
     commit;
Exe_Pos := 8;
          commit;
dbms_output.put_line('8: '||to_char(sysdate, 'HH24:MI:SS'));
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_CUSTNO ON country_traffic_details (CUSTOMER_NUMBER)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_BCN ON country_traffic_details (BCN)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_PRODCD ON country_traffic_details (PRODUCT_CODE)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_SITE ON country_traffic_details (SITE)';
          execDDl(lSql);
          lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_DESTYP ON country_traffic_details (DESTINATION_TYPE)';
          execDDl(lSql);
          Exe_Pos:= 9;
dbms_output.put_line('9: '||to_char(sysdate, 'HH24:MI:SS'));
Exception
     When Others then
     raise_application_error(-20003, 'Error in populateCountryTrafficDetails at Position: '||Exe_Pos||' The Error is '||SQLERRM);
End populateCountryTrafficDetails;
In the above procedure if i substitute the values with hard coded values i.e. AR_orgid = 123 & pcountry = 'Austria' then it runs faster.
Please let me know why it is so ?
Thanks in advance.

Why is quicktime slower when using multiple mdat atoms

Hi,
I've been trying to generate a mov file and I noticed that the more mdat atoms I put in my mov file the more the file takes time to load on QuickTime, iTunes.
Even worst, on the iPhone the file takes more than 3 minutes to load.
If there are too many mdat atoms quicktime even says that the file is invalid ( error -2004 or -2002, I don't remember exactly).
Why is quicktime/iTunes slower when using multiple mdat atoms ?
Thanks,

Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back

Adobe is slow when using the reader

adobe is slow when using the reader; It is very slow when I give to another person

I am working in Windows 7.
I have a pdf with 1900 pages of maps. I am using adobe acrobat 10 standard and sampling adobe acrobat xI pro. When I click on links moving from each map takes about 8 secs. when I save the file and give to someone that is just using adobe reader the process takes 20 to 30 seconds to move.

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

Acrobat XI pro - Slow when using 'save as' or saving merged pdf

System:
Windows 7 pro 64-bit
AMD FX 6300 processor
HD 7770 1 GB video card
1 TB disk space
16 GB RAM
MS Office 2013 Plus
Adobe Acrobat XI Pro
Issue:
Saving pdf is very slow. Regardless if the location is a network location or desktop. Using the 'save as' option is also very slow. It's super slow when using the 'merge' option.
Troubleshooting:
- uninstalled adobe, rebooted system, reinstalled adobe, installed updates - no changes
- tried using optimize pdf option when saving- no changes
- ran adobe in compatiblity mode - no changes

All available updates have been applied/installed.

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Will a iphone purchased in Singapore be covered under complete hardaware and software support when used in India

Will a iphone purchased in Singapore be covered under complete hardware and software support when used in INDIA

See Here > http://www.apple.com/legal/warranty/

Photoshop CC 2014 hangs for nearly 15 seconds when using Layer Group Layers or Layer Palette Group from Layers commands.

Photoshop hangs for nearly 15 seconds when using Layer > Group Layers or Layer Palette > Group from Layers commands. NOT on creating new group and creating layers and drag-n-dropping layers into group manually in Layer Palette. Got a UI design file with nearly 800 layers and lot of groups. This doesn't occur in smaller files. Using OS X Mavericks, Photoshop CC 2014.2.2, Mid 2014 15-inch Retina Macbook Pro.
I understand that the solution would be just to cut the file into smaller files and design each UI view in a separate file but that would be painful. And it does not seem to be a very hard task to just group layers.

Does the document also have a lot of layer comps?
And can you post that document or send me a copy of it so we can see exactly why it is hanging?

CS6 Interface is unresponsive and really slow when using lots of layers on OSX 10.8

Similar Messages

Maybe you are looking for