CS6 - Trouble displaying Flash video in Web pages
Hi,
Here's my problem: I embedded .flv videos in HTML pages the same way I've been doing it for years. It worked fine until I moved to CS6.
The last video clips were edited and encoded in Flash format (1024x576 for 1800 bps) in Premiere CSS6 then embedded in HTML pages in DW CS6 after creating the .swf files with Flash CS6. All CS6, no compatilbity problems then.
Once onlie, they fail to display properly, i.e. you have to click a couple of times on the Start/Pause button and occasionally refresh the page to be able to view the video. It's works fine once started but the trouble is getting it to start automatically.
There's over 300 videos ranging from a few seconds to about 15 min on this site, and this is the very first time I come across this kind of problem.
Any suggestion?
Here's on of the old videos: http://www.aquiceara.com/UK/Video/Bresil_Maranhao_Survol_Lencois.html
And here's one of the CS6 "troublesome" videos: http://www.aquiceara.com/UK/Video/Chine_HK_Tai_Hang.html
The answer is to exactly copy the code from the CS5.5 and below versions of Dreamweaver.
Bu Nancy is correct. Everyone is moving to other standards for video on websites. Nancy generally recommends Pickle Player and I have been hand-coding using the HTML5 standards. I have generally found that all videos play in all browsers using the new standards, though you do have to support OGG and WEBM video files on your server.
Similar Messages
-
Flash video on web page takes long very time to load before it starts playback
I just created a basic flash file to play a video on my web page and it's taking several minutes to load before it starts playback.
I'm using progressive downlaod and the file is in *.mov format and is 84MB in size. At first that seemed large to me for web play back, but I thought it could handle it since I thought the way progressive download works is that it would start playing the first frame right away and progressively play other frames as they download. However, this seems to be downloading the whole file first (or a major part of it) before starting any playback at all.
Is there some kind of setting I'm missing or is my understanding of the download incorrect and the file size is too large?
Some vitals:
- I'm using Flash Pro CS5
- To create my flash file, I used the standard import video wizard and selected the a file that is "on my computer" and "load external video with playback component" and then, I selected one of the standard skins.
- To deploy the vidoe on my webiste I have three files:
1) swf file containing the FLV component
2) the swf file related to skin
3) the actual video (84MB, mov file)
- Web page includes/embeds reference to swf fileThanks for your response again. Looks like things have changed a bit to complicate this a little more.
adninjastrator wrote:
Are you saying that if I wait long enough it will start to play .... from the link you posted?
What you are implying here is correct. The file won't play no matter how long you wait. Looks like it's because of the "source" file settings in the Import Wizard may now be incorrrect. This is why it's not playing in the new file.
When I created my original Flash Video using a MOV file, during the import wizard, when asked "Where is your video file?" I selected the option "Already deployed to a web server...". Here I entered the url to where the video file is located on my production server.
When I created the new Flash Video using F4V file, during the import wizard, when asked "Where is your video file?" I selected the option "On your computer". Here I selected the file from my local drive.
Sorry for not pointing out the inconsistency earlier - I didn't think it mattered and plus I couldn't get the F4V file to import from the web server.
Anyway, I've changed my object tag using the acutal published html that flash generates and have uploaded all source files to same location.
http://www.upperhand.com/tv/video-intro.html
To sum up the problem(s) I need help with:
Issue #1 - When trying to import F4V file using import wizard, I cannot use "Already deployed to a web server..." as an option for the file location. I believe this is creating issue #2
Issue #2 - For some reason, the F4V file will not load into the SWF file when it's published to my production server.
It works when viewing locally through browser as c:\inetpub\wwwroot\mywebsite\video-intro.html
It doesn't work when viewing on development server through browser as http://localhost/mywebsite/video-intro.html
It doesn't work when viewing on production server through browser as http://www.mywebsite.com/video-intro.html
Issue #3 - When the above are resolved, I'm not certain if my orignal question/issue will be resolved... browser tries to downlaod full file before any playback. -
Adding Flash Video to web page
Hi Everyone,
I have a web page that I have added a flash video to using
the insert flash video option in Dreamweaver. I uploaded all the
files including the additional files that are created when you use
that option and when I try to get to the video file once I have
uploaded it will not play. If I use a link directly to the .swf
then it will play but the link to the page where the video is
inserted just shows a blank page. Can anyone give me any guidance
on how I can get this to work.
P.S. If I preview it from my desktop before uploading to the
website it works fine.
Thanks,
RobertUpload the Scripts folder to server.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"ryonker" <[email protected]> wrote in
message
news:g2mpvv$3j3$[email protected]..
> Hi Everyone,
>
> I have a web page that I have added a flash video to
using the insert
flash
> video option in Dreamweaver. I uploaded all the files
including the
additional
> files that are created when you use that option and when
I try to get to
the
> video file once I have uploaded it will not play. If I
use a link directly
to
> the .swf then it will play but the link to the page
where the video is
inserted
> just shows a blank page. Can anyone give me any guidance
on how I can get
this
> to work.
> P.S. If I preview it from my desktop before uploading to
the website it
works
> fine.
>
> Thanks,
> Robert
> -
Displaying flv videos on web page
Please help!!!
I am trying to set up a site to display a number of flash
videos (FLV)
I have no problem creating a single instance - but what I
need to do is to have a number of buttons/links on the left and
then all the videos use the same layer/frame/space to play on the
same page.
So - if I click video 1 or 2 3 etc - they will each play in
the same place.
Can anyone help me with this - or send me to the right place
to research - I have googled my problem but cannot find a solution.
Regards
AlexLexFaure wrote:
> Please help!!!
> I am trying to set up a site to display a number of
flash videos (FLV)
> I have no problem creating a single instance - but what
I need to do is to
> have a number of buttons/links on the left and then all
the videos use the same
> layer/frame/space to play on the same page.
> So - if I click video 1 or 2 3 etc - they will each play
in the same place.
> Can anyone help me with this - or send me to the right
place to research - I
> have googled my problem but cannot find a solution.
> Regards
> Alex
>
Try this FLV player:
http://www.jeroenwijering.com/
Roy -
Hi
i insert flash video to php page and it's ok but.
i want to ask if i could i insert any video to it liek avi or
mpg or any and it will be converted when upload automatically
thanks in advance.macnux wrote:
> Hi
> i insert flash video to php page and it's ok but.
> i want to ask if i could i insert any video to it liek
avi or mpg or any and it will be converted when upload
automatically
>
> thanks in advance.
>
It can be done, since youtube does it. But that requires
heavy-duty programming and I suspect some
special server components (maybe Flash Server must be
installed too or something).
In any case that's not something you can do with Dreamweaver
or without a thorough knowledge of
server-side programming.
An alternative is to create a swf file in Flash that will
import linked media. You can link
quicktime videos dynamically and play them in the swf.
I'm not sure what other video formats are supported. You
might want to look into the Flash Media
Player component.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com -
Multiple Flash Videos on 1 Page
Hi All
If i were to put 4 flash videos into a page, by using the
'import flash video' function in DW CS3 - will they all load at the
same time, or only load when the user clicks play?
Many Thanks
JPIm not sure I understand, however I have a page up with 2
flash movies, but
I timed them by extending the first frame on the one to not
start any motion
until the first one is coming to an end.
So they both in essence start at once, but the one on top
plays out, as it
is coming to an end, the one in the body begins to move...
http://www.unitexservices.com
Dont know if that helps you or not.
Gary
"thewakeplace.com" <[email protected]> wrote
in message
news:g45nrn$3ee$[email protected]..
>I have a bank of videos that i want to put onto the site.
>
> Originally, i was going to do an XML list through a
flash player. But i
> don't
> have the flash server, and i don't know enough of flash
to do it another
> way
> (and i can't find a tutorial).
>
> So i have 20+ videos that are Quicktime and im HD, that
i have converted
> into
> flash, as it adds a nice lat compression to make them
smaller. From there
> i
> want to fit around 4 to 5 videos on a page one after
each other (kind of
> like
> vimeo.com).
>
> So what i need to know is if i put 5 videos on a page,
when the user goes
> onto
> that page, will they all start to play and will the page
start to stream 5
> vids
> at once.
> OR - will they only stream WHEN the user clicks the play
button on each
> one?
>
> Does that make more sense?
>
>
> -
How to display flash file in adf pages
how to display flash file in adf pages need help
Thanks all,
It is resolved.
the code i am using to display a flash is below.
<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version
=10,0,0,0" width="300" height="300" id="11gR1_aniH_grey" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="wmode" value="transparent" />
<param name="movie" value="mx2004demo.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#4d5c64" />
<embed src="../Images/mx2004demo.swf" quality="high" width="300" height="300" name="mx2004demo.swf" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" wmode="transparent"
pluginspage="http://www.adobe.com/go/getflashplayer" />
</object>
</f:verbatim> -
Help in retrieveing Blob from Oracle db and display it on a web page
I am using Sun Studio creator2 and this is what I want to achieve:
When I click on "Load" button, the image is displayed on the web page(the application is a web application)
I have dropped the "image" object from the pallette
Having the database image displayed in the image field, when I enter the image ?Id? and click on the ?Load? button.
Here is my piece of code:
public String loadButton_action() {
HttpServletRequest request = null;
HttpServletResponse response = null;
String connectionURL = "jdbc:oracle:thin:@//localhost:1521/cdecentre1";;
/*declare a resultSet that works as a table resulted by execute a specified
sql query. */
ResultSet rs = null;
// Declare statement.
PreparedStatement psmnt = null;
// declare InputStream object to store binary stream of given image.
InputStream sImage;
Connection connection = null;
String driverName = "oracle.jdbc.driver.OracleDriver";
String dbName = "cdecentre1";
String userName = "christian";
String password = "cc";
String theid = (String)idField.getValue(); //reading the image id
try{
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
connection = DriverManager.getConnection(connectionURL, userName, password);
/* prepareStatement() is used for create statement object that is
used for sending sql statements to the specified database. */
psmnt = connection.prepareStatement("SELECT image FROM CHRISTIAN.PICTURES WHERE id = ?");
psmnt.setString(1, theid);
rs = psmnt.executeQuery();
if(rs.next()) {
byte[] bytearray = new byte[1048576];
int size=0;
sImage = rs.getBinaryStream(1);
//response.reset();
response.setContentType("image/jpeg");
while((size=sImage.read(bytearray))!= -1 ){
response.getOutputStream().write(bytearray,0,size);
rs.close();
psmnt.close();
connection.close(); } }
} catch(Exception ex){
System.out.println("error :"+ex);
return null; }
At the moment, when I click on the ?Load? button, the image is not present in the image field.
I am only obtaining a message inside the message component.
What should I do to have the image displayed in on the web page?
Your help will be highly appreciated.A comprehensive dissertation from Javaworld: http://www.javaworld.com/javaworld/jw-05-2000/jw-0505-servlets.html
Published 05/05/2000, ergo Java 1.0/1 era... still a valid explanation of the problem and the fundamental solution, but take the code (esp ImageIO) from here
http://blog.codebeach.com/2008/02/creating-images-in-java-servlet.html
1. package com.codebeach.servlet;
2.
3. import java.io.*;
4. import javax.servlet.*;
5. import javax.servlet.http.*;
6. import java.awt.*;
7. import java.awt.image.*;
8. import javax.imageio.*;
9.
10. public class ImageServlet extends HttpServlet
11. {
12. public void doGet(HttpServletRequest req, HttpServletResponse res)
13. {
14. //Set the mime type of the image
15. res.setContentType("image/jpeg");
16.
17. try
18. {
19. Create an image 200 x 200
20. BufferedImage bufferedImage = new BufferedImage(200, 200, BufferedImage.TYPE_INT_RGB);
21.
22. //Draw an oval
23. Graphics g = bufferedImage.getGraphics();
24. g.setColor(Color.blue);
25. g.fillOval(0, 0, 199,199);
26.
27. Free graphic resources
28. g.dispose();
29.
30. //Write the image as a jpg
31. ImageIO.write(bufferedImage, "jpg", res.getOutputStream());
////////////// NICE !!!! //////////////
32. }
33. catch (IOException ioe)
34. {
35. e.printStackTrace();
36. }
37. }
38. } Edited by: corlettk on 19/01/2009 23:22 ~~ {color:#FF0000}Never{color} eat an exception! -
To Display SWF file or Flash file in Web Page Composer (WPC)
Hi,
I am goning to add & display 'swf file or flash file' in <b>Web Page Composer</b>.
But it is not allowing me to do so.I tried by three ways
1} to upload this file directly from local machine & to add in WPC
2}By using linklist option
3}By creating KM Document iview;which contain swf file.& then adding that iview in wpc.
but at last it is not displaying though allowing to add it in WPC.Vishal -
First... we are all new to WPC!
Second, no I don't think you need to create a new container. I think that you just need to add the swf type as an allowed type for the container.
So...
Figure out which container you are trying to add the flash file to (as you mentioned, A1, A2, etc).
Navigate to:
Sys Admin --> Sys Config --> Knowledge Mgt --> Content Mgt --> WPC --> Containers.
Edit the container you want to use.
There will be a box named Allowed Mime Types.
In here, select the "swf" mime type (make sure the check box is checked). Then Save.
At my company, we had the WPC ramp up from SP12, and are now on SP13.
I'm not sure what you get if the first time you had WPC is SP13, but for us I see two default A1 (and A2...B1..C4...etc) containers -- one that has "default" in the name and one that has "def" in the name. From what I see, SP13 WPC uses the one with "def" in the name, not "default". So, make sure you modify the one with "def" in the name.
After you make this change, you should see "swf" in the list inside the container when you are editing a page.
Is this clearer? I wish I could attach a screenshot. -
Flash Player in web page hosted on Windows Azure
First, I admit I am a Flash noob. That said, I have an ASP.NET web page (ASPX) hosting a flash movie, and the page works perfectly on my development box but does NOT work when hosted on a Windows Azure web role. The initial image (PNG) displays, and the triangular "play" button is there, but when you click it the player rectangle goes all black.
I have verified that the files are in place. All the naming is correct. As mentioned, it DOES work locally.
This is an SWF file that loads an MP4 file and there's some xxx_config.xml file that provides subtitles to the narration in the video. I did not make the movie, but it was made in Camtasia Studio 7. It generated the core html object tags that I copied, and all the supporting files. As far as I can determine, the SWF file is failing to load the MP4 file.
In theory, this should NOT be a cross-domain issue as all the files are in the same folder of the same web site. I have tried adding a crossdomain.xml for good measure, but that had no effect. I also made sure to try using one single web server instance in Azure in case the load balancing between instances was causing the problem, but that had no effect.
I have a support call in to Microsoft, but of course they say they do not support Flash and I imagine Adobe will say they don't support Azure.
Anyone aware of any Azure-specific gotchas?
PS I am testing in the same IE9 browser from my local machine so browser settings are identical from the case that works.I fixed it myself. It turned out to be an Azure issue, not a Flash issue. By default when an Azure web role instance is created (think VM), the IIS server is not configured with a MIME type for MP4 files. You have to add it to your project's web.config file if you're going to use that type of file.
IIS doesn't like to serve up file types that it doesn't know about. -
Why would Safari 6.0.5 display Flash video using HTTPS but not using HTTP?
Hello Apple Community,
Here's some technical Background:
Platform:
MAC OSX Lion 10.7.5 (11G63)
Windows 7
Windows XP Pro
Safari 6.0.5 (7536.30.1) - MAC
Safari 5.1.7 (7534.57.2) - Windows 7
Safari 5.1.2 (7534.52.7) - WIndows XP Pro
Flash Player 11.7.700.225 - MAC
Flash Player 11.6.602.171 - Windows 7
Extensions:
MeasureIt 0.4.5 - Enabled
Firebug Lite for SAfari 1.2.0.16797 - Enalbed
Block YourSelf from Analytics 1.0 - Disabled
Lorem Ipsum 1.2 - Enabled
Security:
Fraudulent sites - Check
Web Content - Check
Internet plug-ins - Check
Additional Steps:
I just updated Flash again to the latest version MAC
I reset Safari back to defaults
This issue may be just my setup but I cannot figure out nor think of the appropriate question to ask to start to troubleshoot besides the one provided in this thread.
This is the web page I am having issues with Safari:
http://doc-fu.com/episodes
NOTE: This site is built using Drupal 6
I've tested this page on all other browsers MAC + PC and the videos load fine and play accordingly, even the preview poster displays
Testing the same page with Safari MAC + PC and I get a blank Flash screen but the YouTube logo still appears, see following image:
Here comes the confusing part, Under HTTP I get the above blank Flash screen YET when I switch to HTTPS like so https://doc-fu.com/episodes, the videos display and play as expected. Additionally, when under HTTPS all the other browsers DO NOT display the flash video.
I am able to play videos on YouTube's website.
Any help or guidance is much appreciated.
Thank you very much for your help,
bpdadvertisingSame problems here on that site with Safari 6.0.5
The have a Facebook page you can post and ask for help > https://www.facebook.com/DocFuAndHealthTeam -
Has anybody any experience of how to get video from Nokia PT-6 via nokia compatible mobile onto a web page in the manner of say streaming source material - have all the equipement which works in that it sends me emails containing either my output of video or images - what I want to do is set up my web page to recieve and broadcast automatically this same information. I have my own extensive independant pages and associated email
see >http://www.hawar-islands.com/blog/home_stub.phpUpload the Scripts folder to server.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"ryonker" <[email protected]> wrote in
message
news:g2mpvv$3j3$[email protected]..
> Hi Everyone,
>
> I have a web page that I have added a flash video to
using the insert
flash
> video option in Dreamweaver. I uploaded all the files
including the
additional
> files that are created when you use that option and when
I try to get to
the
> video file once I have uploaded it will not play. If I
use a link directly
to
> the .swf then it will play but the link to the page
where the video is
inserted
> just shows a blank page. Can anyone give me any guidance
on how I can get
this
> to work.
> P.S. If I preview it from my desktop before uploading to
the website it
works
> fine.
>
> Thanks,
> Robert
> -
Embedding QuickTime Video om Web Page
Hello,
Thank you in advance for any help someone can provide. I am trying to embed a quick time movie on a web page. I have received the reference file from the company that will host the quick time movie and I successfully can embed the movie. How do I embed the movie with a frame of the movie with the controller to display when a visitor initially visits my page? Do I need to have the reference file recreated?http://www.oreillynet.com/pub/a/javascript/excerpt/learnwebdesign_chap22/index.html
scoot down the page and you will see
Use the autoplay parameter and attribute to set whether the
movie starts
playing automatically when the page loads (true) or if the
user needs to hit
the Play button to start the movie (false).
regards
kenny
"Chris Jumonville" <[email protected]> wrote in
message
news:elqq1l$27f$[email protected]..
> Simple question. I have a quicktime .dv video on my site
and I want to
> embed it on a page so when you click on the page it
automatically brings
> up the movie on the page but doesn't start it
automatically, you have to
> start it manually. How do I do this?
>
> --
> Best Regards,
>
> Chris Jumonville
> -
2 Desired Improvements for the Flash Player 'about' web page
Hi all ... I'm finally writing to request two improvements to this web page:
http://www.adobe.com/software/flash/about/
As a geek, I have long been annoyed that this web page does not keep its Flash object and does not show the Flash Player plugin version number in the same format as used in the detailed list of latest Flash Player versions for various web browers and operating systems.
This web page is mainly a tool for techs. It can be improved greatly with these two changes (which I'm requesting on May 29, 2013):
1) Near the top of the page, KEEP the flash animation object --
do NOT replace it with an advertisement in a few seconds.
Keeping the Flash object there allows a knowledgeable user
to right-click on the object to see the Flash plugin version, which
is a way to confirm that the web page's displayed Flash Player
version is correct.
Currently, the Flash object is replaced within a few seconds
with an advertisement for some other Adobe product. This is
MOST ANNOYING. As a tech, I'm specifically going to this web
page to (a) see that the Flash Player plugin I just installed is
working and/or (b) see what exact version it is.
Again: Keep the Flash object in place -- drop the code that
replaces that object with an advertisement.
2) The displayed Flash Player version is formatted with commas,
as in
You have version
11,7,700,202 installed
while ALL of the versions in the table below are formatted
(properly) with dots, as in
Player version
11.7.700.202
Make it easier for us mere humans to compare these version
numbers ... rework the HTML code to replace the commas with
dots. (It's not rocket science.)
Thank you.
-- A geek and former software build & release
engineer in Tacoma WAThanks, Chris. That other web page does serve my needs better. I've created a web link to it on my flash drive where I keep the latest Flash plugins for IE and non-IE web browsers.
I still feel that the "About" web page needs the two changes I suggested.
Thanks also for pointing out that the box displaying the version of the installed Flash plugin is actually a Flash .SWF object .... since it is currently static (meaning, it has no animation whatsoever), I had no clue it was a Flash object.
So, I add a 3rd request: have that version-display SWF object redone, to have a simple animation added and to have its code to display version revised to use periods (dots) in the version numbers. If that object currently is intended and used in some other Adobe (European?) we page, create a new object for the English "About" page. Or to re-use code, use the version-display object from the page at
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
on the "About" page as well.
Again, as a techie pressed for time, I want a web page where I see the current version of the installed plugins and the versions of the latest releases, in the same formatting,
along with an animated flash object to prove that the Flash plugin in that web browser is working.
I do not accept that the mostly-technical Flash "About" page needs to have marketing materials (an ad). People go to the About page specifically to see the Flash version info and to prove that Flash is working.
Thanks again .... - Ray -
Need code to embed Flash Movie in Web Page
1 - We want to embed a Flash Movie into a regular web page
and need the HTML code snippit sample on how to do it...
2 - What is the difference in HTML coding for a Flash Movie
and a regular SWF Flash File?
3 - Is the Flash Movie file format designed just for video
while swf is designed more for animation?
Thanks for any help.Thanks for the help. Yes I uploaded all of the exported versions:
MVI_1235-Desktop.m4v
MVI_1235-iPhone-cell.3gp
MVI_1235-iPhone.m4v
MVI_1235-poster.jpg
MVI_1235.mov
All are residing in the folder with the reference movie and were not renamed. I noticed in the instructions there is a comment of including the <style> and <script> tags in the <head> of the page so that it validates as XHTML. I copied and pasted the <script> code, but I am not using any <style> tags. I wondered if that is contributing to the issue. Thanks again for the help.
Maybe you are looking for
-
How to have a smooth interface.
Hello I am trying to smooth out the interface of Premiere 9 Elements. I downloaded this last week and was taken back how laggy the interface was, rendering, browsing themes, etc. So I thought my ram was too low so I bought 4 more gigs of it. Nothing.
-
now its saying "service 'bonjour service failed to start. verify that you have sufficient privileges to start system services" what they heck does that mean? i really need help on these issure. if any one can help, please im me on aim @ timebombfreak
-
Hi, I am facing a problem, some of goods we need to pay to vendor before goods delivered to us, I know that we can do the MIRO before goods receipt. But I would like to know any influence if I use this approach? Thanks!
-
I lost my Iphone 4S I am not able to use I cloud to locate it say it is turned off. Is there any other way I can track where it is?
-
DNS Seems to have stopped working, everything was working fine, and yesterday ijust cant connect to my server using its name but only ip address, i check the dns with server admin and dns was green but not configured, lost all my dns machines. i had