CSCuq23854 - 4507 with sup7L-E - ntp broadcast can be configured only on one SVI

Use the following config on the interface vlan that is going to broeadcust the ntp
for example
int vlan 15
ntp broadcast destination <...ip address of client switch management vlan..>
! create acess list for Ntp peer group and allow the client side switch management IP
access-list 5 permit 10.1.15.5
access-list 5 deny any log
ntp access-group peer 5
============================
On the client side
int vlan 15
ntp broadcast client.
Hope that helps....

- in the config section of your application in formsweb.cfg add : userid=@dbname
- in the login-form in WHEN-NEW-FORM-INSTANCE-Trigger access the Database name with
v_ connect_string := GET_APPLICATION_PROPERTY(connect_string);
Put this value into your block/field ...

Similar Messages

Why live broadcast can be seen only on my computer? Why not be seen by other computers?

Hello, I have a problem with FMS 4.5! The live broadcast can only see on my computer. When someone tries to view broadcast, on another computer, error occurs #2048 !When I connect from another computer to see broadcast, FMC Console shows me that the server is connected ,but can not be seen transmission , error occurs #2048 !! I have introduced many variations of file crossdomain.xml in my rootinstall/webroot, taken from here :http://curtismorley.com/2007/09/01/flash-flex-tutorial-how-to-create-a-crossdomainxml-file /
http://www.adobe.com/devnet/adobe-media-server/articles/cross-domain-xml-for-streaming.htm l
However, the broadcast can be seen only on my computer.Where I'm wrong?
Thanks!
http://www.youtube.com/watch?v=QTnSo2zHOzY

Hi Tom,
According to your description, my understanding is that you got an error when you moved your SharePoint.
This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

Error while deleting Cash Journal (Numbering group 1001 can be used only for one CoCd and cash journal number)

Hi,
While i am try to delete Cash Journal system throws me error (Message No.:FCJ065: Numbering group 1001 can be used only for one Co. Code and Cash Journal). Kindly provide me solution on that.
Regards,
Tarak

Hi Tarak,
You can use the config nodes in SPRO to set up number ranges for your cash journal documents.
IMG Path> FI Global Settings>Bank Accounting>Business transactions>Cash Journal
Define Number Range Intervals for cash Journal documents
Define Numbering Groups
Define Number Ranges for numbering groups
After defining the number group here, you assign that in "Set up Cash Journal" Check if there is any clash anywhere in your configuration for different cash Journals.
Regards,
Kavita

Numbering Group G1 can be used only for one CoCd and cash journal number

Hello,
I was trying to create a cash journal when I got the error message:
"Numbering Group G1 can be used only for one CoCd and cash journal number".
Does anyone have an idea what could be wrong?
Thank you,
Bola

Hi,
Please check whether more than one number range is maintained in transaction code FBCJC1. If yes, please keep only one as Cash Journal has only one number range. This is the internal number range for Cash Journal.
If you want different number range for accounting documents then create new document types and assign number ranges to it.
Regards,
Tejas

I'm wanting to migrate certain applications from my MacBook Pro over to my newer Mini, but Migration Assistant doesn't allow doing this by choosing which applications to migrate-how can I pick only certain ones?

I'm wanting to migrate certain applications from my MacBook Pro over to my newer Mini, but Migration Assistant doesn't allow doing this by choosing which applications to migrate-how can I pick only certain ones?

You only bought it four months ago, so it's still under warrantly.
Call Applecare or call your nearest Applestore to make an appointment. Tell them your mac has serious technical issues, describe them shortly.

How to sync with Firefox sync after reinstalling Windows? I only have one device.

Just like this user I was syncing only one device. After reinstalling windows, I can't reconnect and I don't have the recovery key...
What can I do? To access my bookmarks, favorites, etc?
Thanks!

Thanks for the replies. Unfortunately I'm missing the recovery key and don't synch with other devices so I guess that means I'm out of luck...
Maybe this is something that can be added to the roadmap for future improvements. I don't see a reason why you can't get your information back after a reset if you've only got one device.

When I download from iTunes to my new iPod nano, can I select only the one folder I have made for download -- do not want my whole music library to be synched.

Am I able to download only a selected music folder I have created in iTunes to my new iPod nano? I do not want to download my whole music library. Want to know before whole site sync starts up automatically.

What you CAN do is create a playlist in iTunes containing all the content you wish to be synced to your Nano. Then configure your Nano to sync only that one playlist from under the iPod's Music configuration tab in iTunes.
B-rock

Can't sync anything with my microsoft account and can't create a new one?

Hi,
I have recently done a software update to Windows 8.1 and now every time I try to access an app it prompts me to sign in to sync my data. I follow the screen prompts using my email address and password (the same as the one I have used to access this forum
so my current working microsoft account) and it says a microsoft account with this email address already exists on this PC.
I get through to the validation code page section, the code is sent to my phone, I enter it, the cloud information page is displayed the switch to microsoft account option appears I click switch and it says an account already exists on this PC???
If I try to choose the alternative option of creating a new account with the same email address (my main email account) I have the same issue which is an account already exists.
I have lost data and can't sync any music tracks etc - hugely frustrating!
What do I do??

Hi,
What's your current User Account? Local Account or Microsoft Account? If local account, please sign out and switch to Microsoft Account. If not, it should have problem with your Microsoft Account, please try to delete it from your system and readd it for
test.
Roger Lu
TechNet Community Support

With existing large managed library, can I export only jpegs to a laptop?

Hi folks,
The subject line is perhaps not well phrased, but I'm wondering is it possible to do the following: given that I have a large, well-established Aperture library with all of my RAWs on my desktop machine, is it possible to nicely export the JPEGs of those RAWs into a library file that could fit on my laptop, for preview purposes?
It'd be necessary to keep ratings and other metadata, of course, although I don't care about syncing any changes I make on the laptop back.

If you use referenced masters, then generate previews of all of your images (will take a long time). The previews live in the library. Copy that library to your laptop, then you can delete the previews in your main library.
Since you use managed masters, you'll have to relocate them temporarily.

Help with lists and Numbers - how can I separate data from one column?

I have a series of data entries that have two or three pieces of information listed in one column (it was a list copied from the Internet). My data is in this form all in one column (ie Column A):
XXXX -- YYYY, ZZZZ
I want to be able to easily split that data into three columns (A, B, and C) without having to go through and manually separate all of the entries? I'd ideally like to have XXXX in one column, the '--' removed, YYYY in another column, and ZZZZ in a third column, like this:
Column A Column B Column C
====== ====== ======
XXXX YYYY ZZZZ
Is this possible? Any help is appreciated.

BlooGoo
Open or paste your material in your favorite texteditor. TextEdit will suffice but there are better applications. Make sure your material is consistent, especially that there are no stray characters or extra spaces studded in the text. You can do this by using the clean up routine as described below.
1. Copy the set of characters you want to replace. In this case " -- " Note that there are spaces on each side of the dashes and you want to get rid of those.
2. Open the *Find and Replace* dialogue:
+Menu > Edit > Find > Find…+ (or command f)
Paste the " -- " into the Find: field, then type a comma in the Replace: field or
Copy and paste a tab from the document or
Click on the Advanced button and enter a tab using the Insert… button that appears.
3. Click *Replace All.*
Repeat as necessary. If it doesn't seem to work, copy and paste the bits that stick, usually there is something not visibly different but different as far as the computer iust concerned.
When you are finished save the results as a comma or tab delimited delimited .txt file and reopen it in Numbers.
Peter

I am having a hard time with my Apple ID why can't I just select one password and it works for all my "Apple" appliances?

Why can't I used only one password to log in on my Apple computer, IPad ,ITunes and IPod. I've tried to log in and I get a wrong password and after two times trying I need to reset my password and it's gets confusing for me, plz if anyone can assist me I'll be thankful I'm new to Apple and it's great but at times I get confused.......Thank You, Asan

You can of course use the same Apple ID on all your Apple devices. But, each time you're resetting your ID, you're causing yourself a 90 day issue. At this point, contact Apple for assistance. If you're in the US, you can call 1-800-MYAPPLE

Can I configure csm as one arm and routing mode at the same time?

My csm currently is configured as the routing mode and bridge mode, resently I have a service requirement which I think the one arm mode should be the best resolution. Can anybody let me know if there will be any affect if I add the one arm mode to the currently production environment?
Thanks in advance.
Jason

Gille,
Thanks for your quick response. I notice you have same opinion about the one arm mode in your other post, but I think in the multi-tire data center design with fw in bridge mode and csm in one arm mode with RHI, do give us a lot of flexibilty. If I use policy routing instead of source nat, can I overcome these limit you metioned?
Do you know who csm could handle the TFTP traffic? I may have too much question, I am realy looking for your suggestion.
Thanks
Jason

Can Adobe Configurator 3 create one panel that can be installed in other versions of Photoshop?

Hi,
I am able to create a new panel for CS5 and CS6, however, if I create a CS5 panel (thinking it should work in CS6 as well), when I try to install the panel ZXP file in CS6 Extenstion Manager, I am unable to do so...meaning, the CS5 panel will not load for users with CS6? Is there any way to create a panel in Configurator 3 that will export one zxp (or similar package file) that can install in multple versions of Photoshop?
I note in Configurator 2, I was able to export an mxi file that I could convert in Extension Magager 3 and that seemed to open without issue, however with Configurator 3, I don't see any other export options but zxp. Any help on this would be great! Thank you!!
Evan

Because of the difference of scripting interface of CS5 and CS6, Configurator cannot create a panel that works for multiple versions of Photoshop. You need to create two of them for CS5 and CS6. In your case, I suggest you create a panel of CS5, and then create a version of CS6 by clicking "Edit->Convert to CS6". (Some buttons will be lost if those buttons are not supported in CS6)
Configurator 3 creates the zxp for you and you need not to create one with mxi file and Extension Manager.

Can a link only change one cell in a table?

I've been learning Dreamweaver from a textbook, but I'm still pretty new to it, and I'm not sure what terminology to use here. I want my site to have a link that just changes one cell in a table when you click the link, rather than having it go to a whole new page. For example, you click a link and a picture changes but the rest of the site stays the same. So far, I've been doing this by just making several duplicates of an html file, and then just changing that one cell in each copy. It works, more or less, but then whenever I want to make a change to my page, I have to make the same change in all the copies. There's got to be a better way, right?
If this is too complicated to explain in a forum, perhaps someone could just tell me if there's a term for what I'm trying to do, and then I can just look for it in my book or search for it online.
Thanks for your help. Oh, and the version I'm using is CS5.

What you are asking for is called a 'disjoint rollover', which means 'something happens over here, and the effect is seen over there'. It's simple to do even manually. Take a look at this page -
http://www.murraytestsite.com/locrian.html
The code on the page is this -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<table width="347" border="1">
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  <img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
</table>
</body>
</html>
I used a table because you specifically asked about tables, but I wouldn't recommend using them for anything other than tabular data, and certainly not for general layout. The code could be re-written like this to completely eliminate the table -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<div><p><img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></p></div>
</body>
</html>
Better, huh?

CSCuq23854 - 4507 with sup7L-E - ntp broadcast can be configured only on one SVI

Similar Messages

Maybe you are looking for