CSCur17253 - 8.1.10.20 controller Watchdog detected LOCKUP !!!!!

getting error..
User:Unhandled kernel unaligned access[#1]:
Cpu 1
$ 0   : 0000000000000000 ffffffff81402510 0000000000000000 a80000002b96fbe8
$ 4   : ffffffff81127f04 fffffffffc85ffc0 ffffffff8128fafc 2800000034006980
$ 8   : a80000002b96fbc0 00000000129c6b70 ffffffffffffffff 0000000000000000
$12   : 000000001000cce1 000000001000001e ffffffff8112c548 000000003fbda6e0
$16   : a80000002b96fbc0 a800000025d5a400 ffffff0000000000 a800000003592b80
$20   : 0000000000000100 0000000000000000 a8000000037ff480 000000000000009a
$24   : 0000000000000002 ffffffff8112ae40
$28   : a80000002b96c000 a80000002b96fb90 000000ffffffffff ffffffff81120484
Hi    : 000000000000001f
Lo    : 0000000033333362
epc   : ffffffff81127f28 do_ade+0x2a8/0x520     Tainted: PF
ra    : ffffffff81120484 ret_from_exception+0x0/0x10
Status: 1000cce3    KX SX UX KERNEL EXL IE
Cause : 00000014
BadVA : 2800000034006980
PrId : 000d0708
Modules linked in: ethernet_pow sshquicksec(P) wlc_ha(P) wlc_dtl(F) wlc_af(P) wlcng_fpga mii
Process switchdrvr (pid: 1220, threadinfo=a80000002b96c000, task=a80000002b944738)
Stack : 2800000034006980 a800000025d5a400 0000000000000100 a800000003592b80
        ffffffff81120484 000000000000000e 0000000000000000 000000001000cce1
        2800000034006980 a800000025d5a400 28000000340069c0 0000000000000000
        000000000000010c ffffffffffffffff 000000002ad33f7c 00000000129c6b70
        ffffffffffffffff 0000000000000000 0000000000000008 2800000034006a80
        ffffffff8112c548 000000003fbda6e0 2800000034006980 a800000025d5a400
        0000000000000100 a800000003592b80 0000000000000100 0000000000000000
        a8000000037ff480 000000000000009a 0000000000000002 ffffffff8112ae40
        a800000003466800 0000000000000040 a80000002b96c000 a80000002b96fd20
        000000ffffffffff ffffffff81333778 000000001000cce3 000000000000001f
Call Trace:
[<ffffffff81127f28>] do_ade+0x2a8/0x520
[<ffffffff81120484>] ret_from_exception+0x0/0x10
[<ffffffff8128fafc>] __bzero+0x38/0x60
[<ffffffff81333778>] __alloc_skb+0x98/0x170
[<c0000000000b9434>] do_interrupt+0x1ec/0x698 [ethernet_pow]
[<ffffffff81189c28>] handle_IRQ_event+0x70/0x150
[<ffffffff8118bf2c>] handle_percpu_irq+0x94/0x110
[<ffffffff811029f0>] plat_irq_dispatch+0xd0/0x260
[<ffffffff81120480>] ret_from_irq+0x0/0x4
Code: 000318f8 0070182d dc620000 <b0e20000> b4e20007 24020000 1440ffe4 0000882d 08449fdf
Kernel panic - not syncing: Fatal exception in interrupt
Call Trace:
[<ffffffff81126b48>] dump_stack+0x8/0x48
[<ffffffff8114f22c>] panic+0xac/0x350
[<ffffffff81126a4c>] die+0x1a4/0x1b0
[<ffffffff81128190>] do_ade+0x510/0x520
[<ffffffff81120484>] ret_from_exception+0x0/0x10
[<ffffffff81127f28>] do_ade+0x2a8/0x520
[<ffffffff81120484>] ret_from_exception+0x0/0x10
[<ffffffff8128fafc>] __bzero+0x38/0x60
[<ffffffff81333778>] __alloc_skb+0x98/0x170
[<c0000000000b9434>] do_interrupt+0x1ec/0x698 [ethernet_pow]
[<ffffffff81189c28>] handle_IRQ_event+0x70/0x150
[<ffffffff8118bf2c>] handle_percpu_irq+0x94/0x110
[<ffffffff811029f0>] plat_irq_dispatch+0xd0/0x260
[<ffffffff81120480>] ret_from_irq+0x0/0x4
LKCD: Dumping from interrupt handler!
LKCD: sending IPI to other cpus...
LKCD: done waiting: 0 cpus not responding
LKCD: Switch I/O scheduler from cfq to noop
LKCD: Dumping to block device (254,4) on CPU 1 ...
LKCD: Writing dump header
LKCD: Switch I/O scheduler from noop back to cfq
LKCD: dumped 0 blocks of 65536 bytes each
LKCD: Dump Complete; 0 dump pages saved.
LKCD: Kernel restart in 10 seconds.
WLCNG Boot Loader Version 1.0.18 (Built on Oct 5 2012 at 00:04:18 by cisco)
Board Revision 0.0 (SN: PSZ163501VY, Type: AIR-CT2504-K9) (P)
Verifying boot loader integrity... OK.
OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
CPU Cores: 4
DRAM: 1024 MB
Flash: 32 MB
*** Warning - bad CRC, using default environment
Clearing DRAM........ done
Network: octeth0', octeth1, octeth2, octeth3
' - Active interface
E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: 1GB CompactFlash Card Firm: CF B612J Ser#: C371101720A1Yj6CG6XG
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
Press <ESC> now to access the Boot Menu...
Loading primary image (7.4.100.60)
100%
34612681 bytes read
Launching...
Launching images...

Any body can help on this?
Thanks.

Similar Messages

Xboxdrv controller not detected by Escape Goat 2

I'm trying to use the xboxdrv driver (for my xbox 360 controller) instead of the xpad driver and I'm having some issues with it not being detected by Escape Goat 2. Here are my results:
Steam + Escape Goat 2 + Xpad = Controller detected and works fine
(i.e. ran escape goat 2 from steam)
Steam + Big picture mode + xboxdrv = works fine
Steam + other linux games (e.g. towerfall ascension) + xboxdrv = works fine
Steam + Escape Goat 2 + xboxdrv = controller not detected
Escape Goat 2 + xboxdrv = works fine
(i.e. ran escape goat 2 from outside of steam)
I think the last result is most interesting.
Any ideas on why it's not being detected when run via steam?

I'm trying to use the xboxdrv driver (for my xbox 360 controller) instead of the xpad driver and I'm having some issues with it not being detected by Escape Goat 2. Here are my results:
Steam + Escape Goat 2 + Xpad = Controller detected and works fine
(i.e. ran escape goat 2 from steam)
Steam + Big picture mode + xboxdrv = works fine
Steam + other linux games (e.g. towerfall ascension) + xboxdrv = works fine
Steam + Escape Goat 2 + xboxdrv = controller not detected
Escape Goat 2 + xboxdrv = works fine
(i.e. ran escape goat 2 from outside of steam)
I think the last result is most interesting.
Any ideas on why it's not being detected when run via steam?

Ide 2 controller not detect

hi, THIS IS NOT MSI PRODUCT,BUT I NEED YOUR HELP ,AND IDEA
my intel SE440BX ide 2 cannot detect my cd-rom,and i try to read from windows(windows 98SE)device manager the secondary ide controller not detect,but at cMOS the both of ide was enable ,the CDROM is working ,pls help me.
IF can't use ,do your know the configure the creative Sound blaster 16(CT2910)the IDE port,can your show the method

does the cd-rom detect on bootup when you set the secondary master/slave to auto-detect?
When you say that the secondary ide not detect in windows, do you mean that you only get a primary ide controller? Try going into the Main IDE controller properties (can't remember what it's called in 98), and make sure that both ide channels are enabled, this is done in device manager, it's in the same section as the primary/secondary ide controller's are.

Command sh controller to detect line speed

If I perform the following command on a cisco 72xx series, I get an output which is showing me the speed the serial port is getting from the Csu/dsu.
The same command performed on the cisco 17xx; 18xx;26xx;28xx series never showes the clockrate. Is it impossible to get it or there is another way? Since sometimes Ptt set wrong speed on the csu/dsu it could be important check on the router which speed is detecting
7206vxr#sh controller s2/5
M8T-V.35: show controller:
DCD=up DSR=up DTR=up RTS=up CTS=up
line state: up
cable type : V.35 DTE cable, received clockrate 2047212<<<<<<<<<<<<<<<<<<<<<<<

Hi,
received clock measured is available only on certain HW interfaces. There is no way to obtain the clock info where not supported.
Hope this helps, please rate post if it does!

Initio INI-9090U SCSI controller not detected

I'm having a problem with my G4 and it detecting my Initio INI-9090U controller. From what I've read so far, it doesn't look promising to get it running on OSX 10.3.9. I'm new to MAC (PC tech) but I am getting around and feel more comfortable with using it. Initio is not clear on how to update the firmware if at all possble within 10.3.9. I have tried updating the firmware witn 0S 9.1 with no luck yet.
http://www.initio.com/support/index-download.htm
On a side note, I have an Advansys ABP-915 that is MAC compatible but can't get that to run either. It looks like this one first needs a firmware update too. I ran there install app and it loaded a bunch of drivers and utilities on the root of my startup disk (chosen localtion) but none of the utilities seem to be correct for the card I have.
To explain before anyone asks, I am not really that interested in buying a new card. The G4 was given to me from work for learning opportunities in my spare time. I will admit this, its been fun so far.
Any help would be appriciated.

I don't have URLs, but a number of SCSI cards don't detect well. As an example, if I open System Profiler, it doesn't detect the card or drives attached to it. At least in the "bus" section, in the PCI card section it does see the card (Adaptec 2906)
But, the drives mount at boot and Disk Utility see's the drives and the drives mount and dismount just fine.
A lot of these cards (like mine) will NOT support booting from SCSI for that reason.
I hope this is a little help

Watchdog reset in WLC 5508 7.4.100.60

Hi ,
Last week we found that primary WLC was hanged so we need to reboot it.
As per logs:
Last Reset....................................... Watchdog reset
We are using 7.4.100.60.
Any idea what could be the root cause.
Regards,

Check your WLC serial number as well, if it starts FCW1614 or later then it may be due to this bug as well.
CSCul68057
Symptom:
Wireless LAN Controller may encounter unexpected reload without crash file or coredump.
Console log output may include "reaperWatcher rebooting" and "!!!!! Watchdog detected LOCKUP !!!!!",
and there may be "#OSAPI-2-REAPER_WATCHER_INFO" message in syslog.
Conditions:
5508, 2504 or WiSM2 manufactured after April 2012.
Affected S/N: FCW1614xxxx and later
This is due to incompatibility of previous driver with some of the flash components used after that date
Workaround:
None, upgrade to one of the recommended software versions
Anyway your choices are very limited now, only 3 WLC software codes supported by Cisco 7.0.250.0(7.0MR5), 7.4.121.0 (7.4MR2) and 7.6.101.x(7.6MR1). So upgrade to 7.4.121.0 code as that is the highly recommended code at the moment. See below for more details
https://supportforums.cisco.com/docs/DOC-40178
I would suggest to go for FUS 1.9.0.0 as well.
HTH
Rasika
*** Pls rate all useful responses ****

X4600 M2 crashes under load

Hello,
I've got x4600 M2 with 256GB of memory and 8 dual-core Opterons, all parts officialy supported. I'm running SLES10 and SLES10sp1 on it, also certified to run properly. The problem is that when running heavy computations (100% of all cpu's and 95% of memory) it does not survive for more than hour. The problem is easy to replicate (boot the system up, run anything resource-hungry, wait 40-60 minutes, have system hanged), but hard to diagnose - these is no single chunk of data. When working interactively system chokes down for a minute and later on freezes completely with no single message. BMC also says that everything is ok. I was able to catch error message only once making 20 hangs. It's included below.
The only way to run it stable I found is to run non-smp kernel. Having single core "fixes" things - 256 gb of memory is still available, but 15 cores are lost then.
Any idea what the cause may be?
Regards,
nobody12345
Jul 17 11:19:44 bigmem01 kernel: warning: many lost ticks.
Jul 17 11:19:44 bigmem01 kernel: Your time source seems to be instable or some driver is hogging interupts
Jul 17 11:19:44 bigmem01 kernel: rip __do_softirq+0x4a/0xd2
Jul 17 11:19:44 bigmem01 kernel: NMI Watchdog detected LOCKUP on CPU 1
Jul 17 11:19:44 bigmem01 kernel: CPU 1
Jul 17 11:19:44 bigmem01 kernel: Modules linked in: mmfs mmfslinux tracedev ipv6 edd button battery ac apparmor aamatch_pcre loop usbhid dm_mod shpchp pci_hotplug i2c_nforce2 e1000 ehci_hcd ohci_hcd i2c_core mptctl usbcore ext3 jbd fan thermal processor sg mptsas mptscsih mptbase scsi_transport_sas amd74xx sd_mod scsi_mod ide_disk ide_core
Jul 17 11:19:44 bigmem01 kernel: Pid: 5912, comm: fluentlm-helper Tainted: P M U 2.6.16.46-0.12-smp #1
Jul 17 11:19:44 bigmem01 kernel: RIP: 0010:[<ffffffff802da725>] <ffffffff802da725>{.text.lock.spinlock+49}
Jul 17 11:19:44 bigmem01 kernel: RSP: 0018:ffff810801b499e0 EFLAGS: 00200082
Jul 17 11:19:44 bigmem01 kernel: RAX: ffff810801b49a18 RBX: ffff81381ed834c8 RCX: 0000000000000000
Jul 17 11:19:44 bigmem01 kernel: RDX: 0000000000000000 RSI: 00003ffffffff000 RDI: ffff813020001280
Jul 17 11:19:44 bigmem01 kernel: RBP: ffff813020000d00 R08: 00000000000000b8 R09: ffff810801b49a98
Jul 17 11:19:44 bigmem01 kernel: R10: 0000000020000d00 R11: 0000000000000021 R12: 0000000000000000
Jul 17 11:20:32 bigmem01 kernel: R13: 0000000000000000 R14: ffff810801b49ba8 R15: 00000000003a020a
Jul 17 11:20:32 bigmem01 kernel: FS: 0000000040602940(0000) GS:ffff81080347d540(0063) knlGS:00000000f5d6dba0
Jul 17 11:20:33 bigmem01 kernel: CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b
Jul 17 11:20:33 bigmem01 kernel: CR2: 0000555555568043 CR3: 0000004003353000 CR4: 00000000000006e0
Jul 17 11:20:33 bigmem01 kernel: Process fluentlm-helper (pid: 5912, threadinfo ffff810801b48000, task ffff810802b00810)
Jul 17 11:20:33 bigmem01 kernel: Stack: ffffffff801667fc ffff810801b49aa8 0000000000000063 00000000003a01ed
Jul 17 11:20:33 bigmem01 kernel: 0000000000000001 00000000ffffffff 0000002100000020 ffff810801b49a18
Jul 17 11:20:33 bigmem01 kernel: ffff810801b49a18 0000000001d78e08
Jul 17 11:20:33 bigmem01 kernel: Call Trace: <ffffffff801667fc>{shrink_zone+696} <ffffffff8010ebe0>{do_gettimeofday+80}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff80136af1>{getnstimeofday+16} <ffffffff801f1ff3>{find_next_bit+85}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff8016830f>{try_to_free_pages+367} <ffffffff80163225>{__alloc_pages+433}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff80164a9f>{__do_page_cache_readahead+149} <ffffffff80145aab>{autoremove_wake_function+9}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff801609af>{filemap_nopage+323} <ffffffff8016b2eb>{__handle_mm_fault+511}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff802dc44e>{do_page_fault+965} <ffffffff802d9e89>{__mutex_lock_slowpath+101}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff801a7680>{compat_filldir64+0} <ffffffff802d9e1b>{__mutex_unlock_slowpath+42}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff802d9ec1>{.text.lock.mutex+5} <ffffffff80192be4>{vfs_readdir+157}
Jul 17 11:20:34 bigmem01 kernel: <ffffffff8010bc15>{error_exit+0}
Jul 17 11:20:34 bigmem01 kernel:
Jul 17 11:20:34 bigmem01 kernel: Code: 7e f9 e9 c1 fe ff ff f3 90 83 3f 00 7e f9 e9 d2 fe ff ff e8
Jul 17 11:20:34 bigmem01 kernel: console shuts up ...
Jul 17 11:20:34 bigmem01 kernel: NMI Watchdog detected LOCKUP on CPU 7
Jul 17 11:20:34 bigmem01 kernel: CPU 7
Jul 17 11:20:35 bigmem01 kernel: Modules linked in: mmfs mmfslinux tracedev ipv6 edd button battery ac apparmor aamatch_pcre loop usbhid dm_mod shpchp pci_hotplug i2c_nforce2 e1000 ehci_hcd ohci_hcd i2c_core mptctl usbcore ext3 jbd fan thermal processor sg mptsas mptscsih mptbase scsi_transport_sas amd74xx sd_mod scsi_mod ide_disk ide_core
Jul 17 11:20:35 bigmem01 kernel: Pid: 5902, comm: fluent_mpi.6.3. Tainted: P M U 2.6.16.46-0.12-smp #1
Jul 17 11:20:35 bigmem01 kernel: RIP: 0010:[<ffffffff802da722>] <ffffffff802da722>{.text.lock.spinlock+46}
Jul 17 11:20:35 bigmem01 kernel: RSP: 0018:ffff8117f9f0fb30 EFLAGS: 00000086
Jul 17 11:20:35 bigmem01 kernel: RAX: ffff8117f9f0fb68 RBX: ffff813819419b20 RCX: 0000000000000000
Jul 17 11:20:35 bigmem01 kernel: RDX: 0000000000000000 RSI: 00003ffffffff000 RDI: ffff813020001280
Jul 17 11:20:35 bigmem01 kernel: RBP: ffff813020000d00 R08: 00000000000002e8 R09: ffff8117f9f0fbe8
Jul 17 11:20:35 bigmem01 kernel: R10: 0000000020000d00 R11: 0000000000000021 R12: 0000000000000000
Jul 17 11:20:35 bigmem01 kernel: R13: 0000000000000000 R14: ffff8117f9f0fcf8 R15: 00000000003e8d5a
Jul 17 11:20:35 bigmem01 kernel: FS: 00002adaafd89ae0(0000) GS:ffff8118201f8f40(0000) knlGS:00000000f4d6bba0
Jul 17 11:20:35 bigmem01 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jul 17 11:20:35 bigmem01 kernel: CR2: 00007fffa51ff940 CR3: 0000001803cd9000 CR4: 00000000000006e0
Jul 17 11:20:35 bigmem01 kernel: Process fluent_mpi.6.3. (pid: 5902, threadinfo ffff8117f9f0e000, task ffff8117f9e5a100)
Jul 17 11:20:35 bigmem01 kernel: Stack: ffffffff801667fc ffff8117f9f0fbf8 0000000000000063 00000000003e8c19
Jul 17 11:20:35 bigmem01 kernel: 0000000000000001 00000000ffffffff 0000002100000020 ffff8117f9f0fb68
Jul 17 11:20:35 bigmem01 kernel: ffff8117f9f0fb68 000000000212e43b
Jul 17 11:20:35 bigmem01 kernel: Call Trace: <ffffffff801667fc>{shrink_zone+696} <ffffffff8010ebe0>{do_gettimeofday+80}
Jul 17 11:20:35 bigmem01 kernel: <ffffffff80136af1>{getnstimeofday+16} <ffffffff801f1ff3>{find_next_bit+85}
Jul 17 11:20:35 bigmem01 kernel: <ffffffff8016830f>{try_to_free_pages+367} <ffffffff80163225>{__alloc_pages+433}
Jul 17 11:20:35 bigmem01 kernel: <ffffffff8016b593>{__handle_mm_fault+1191} <ffffffff802dc44e>{do_page_fault+965}
Jul 17 11:20:35 bigmem01 kernel: <ffffffff8016f994>{do_mmap_pgoff+1060} <ffffffff8016fb80>{do_mmap_pgoff+1552}
Jul 17 11:20:35 bigmem01 kernel: <ffffffff8010bc15>{error_exit+0}
Jul 17 11:20:35 bigmem01 kernel:
Jul 17 11:20:35 bigmem01 kernel: Code: 83 3f 00 7e f9 e9 c1 fe ff ff f3 90 83 3f 00 7e f9 e9 d2 fe
Jul 17 11:20:35 bigmem01 kernel: console shuts up ...

I've seen this type of error on dual core CPUs running at full (100%) load. The system will hang with a CPU context corrupt error. Typically, this error is due to
bad memory, not a bad CPU, but since you say that when you run in single CPU mode, everything "works", I'd suspect a bad CPU.Well, it "works" the way that it doesn't crash. It's hard to stress the system as much as with 16 cpu's having one core only, so this option can't excluded. I even found one insignificant memory module with correctable ecc and took affected pair out. No change at all. As for cpu context corrupt - that was the first thing which came into my mind after seeing error data, but two cores in separate cpu's wouldn't rather crash in the same moment. I have plans to run fascist cpu check anyway.
I'd suggest booting the SUN Diag CD that came with the system and doing an in depth memory and CPU test.Just booting.
In addition, there is a very nice program called "stress" that will simulate your load conditions and provide diagnostic output. This tool has proved to be very
helpful.You seem to be more experienced that me here - if I bind it to specific core and start cycling it at 100%, it won't generate many context switches, right? Having 15 unused cores would rather guarantee having this one left in peace.
You may also want to check the TOY clock on the x4600 motherboard to make sure it is properly set. I've seen conditions where the system clock becomes
so unsynched from the TOY clock that system calls fail. Boot into the BIOS to set the TOY clock. Also, make sure your NTP server setttings are properly
configured.Will do with next downtime. Which is, considering constant crashes, probably tomorrow.
One last thing... when Linux begins to run out of memory (as you say, the app takes 95% of memory), the kernel starts to kill off system level
processes/daemons, one of which is ntpd. I'd suggest running your application to use less memory if possible, and see if it runs properly. My suggestion
would be to boot the kernel, then see what amount of memory is mapped by the kernel without any apps running. Then subtract that from the total memory.
The 'free' command is useful for this (or 'cat /proc/meminfo').Ntp is always ok. After an hour it usually corrects 1.2s, so clock source is not too reliable, but ntp keeps it under control until I kill the server.
Oh.... one more last thing... if the kernel needs to swap out the 95% memory process, does it have sufficient swap to do so? This could also create an issue. It does not for sure. Also kswapd's are very active, up to 100% cpu sometimes. Does it mean that going out of memory causes os crashes? I've seen such situation many times - kernel is expected to kill few processes and recover. And it does on all other machines (IMB servers, blades etc.) I don't care what it kills at the moment, as it simply freezes.
I'll stress the system cpu by cpu in the weekend. If you know any way to make it really proper way I'd gladly hear your advice. Your help is very appreciated BTW.

Error detecting promise sata controller on kt4 ultra

Hello,
I've searched the forum and "the rest" of the internet without finding a solution to my problem.
The problem is: Normally when you boot the kt4-ultra you will have a message saying "FastTrack 376(tm) Bios version 1.00.0.18(c)2002-2005 Promise Technology, Inc." and then either No drive attached to FastTrack Controller, The BIOS is not installed or information about your HDD configuration.
In my case sometimes without any reasonable explaination my computer won't detect the promise fasttrak controller AT ALL! It just jumps right over it, as it didn't excists. This is very strange since it's enabled in the BÌOS settings and it could be detected at the next reboot, or in many cases it wont be detected again for several days
As far as I can see it has nothing to do with the harddrives connected to it, as it happens anyway either with a SATA disk connected, IDE disk or no disks at all....
If anyone could help me out with this problem I'll be very gratefull!

Quote
Originally posted by Fredrik Åsenius
How are your hard disks configured, and your CD/DVD etc?
I've litary tried every possible combination. The problem remains even with no disks or CD/DVD drives installed on the Fasttrak controller or IDE 1/2. Sometimes the controller is detected, sometimes not.
I should point out that if the controller is detected it always find my HDD who's connected to it and it works fine in Windows. But if it's not detected Windows will find a new hardware and try to install drivers to it, but it won't work cause the hardware is reporting an error and Windows will ofcourse not find a disk....
Quote
What operative system do you have? On a quick search I found mostly linux related problems, though I was not too thorough.
I have Windows XP, but I don't think it matters what OS i'm running.
On the searched I've done Im only finding Linux and compability related problems...
I've had this problem for over 6 months now and I'm getting a BIT tired the shitty controller....

Dead controller and no sleep

A few weeks ago my g4 Quicksilver with Apple Studio display would shut off display and then power down the hard drive per the energy saver settings and work appropriately. Then the display would shut off and the hard drive would power down and then power back up immediately and not sleep, but eventually would go to sleep just leaving it alone, or a few tries from the Apple menu. Now the g4 will not sleep at all from energy saver or the Apple menu.
I am getting this from the console system log:
Nov 24 15:16:23 QUICKSILVER kernel[0]: USBF: 1351.584 AppleUSBOHCI[0x18c8800] Watchdog detected dead controller (hcca #: 11745, hc #: 63458)
Is there a workaround/fix for this?
Thanks

Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Sleep issues or a kernel panic may occur if a storage device is mounted via a PCI card that doesn't support sleep
http://support.apple.com/kb/TA24639
It's being caused by some USB device. Disconnect all external USB devices & see if sleeps properly. Could be your printer.
 Cheers, Tom

Dead USB controller after waking up from sleep

Hi,
I posted this a while back but the issue is still unresolved. I am experiencing USB port sleep issues after upgrading to Tiger (currently running 10.4.8). Sometimes the build-in USB port that has my keyboard connected to literally wakes up dead from sleep. Here is the error message from the Console log
(XX-Computer kernel[0]: USBF: 24445.528 AppleUSBOHCI[0x15ab800] Watchdog detected dead controller (hcca #: 56759, hc #: 64465).
This happens with no set pattern, sometimes it wakes up fine, other times the port is dead. A restart is required to bring it back to life.
Any ideas why this is happening? If I plug in my keyboard to the other USB 1.1 port everything works fine (the port remains dead until the next restart). I also have a USB2 PCI card that works with the keyboard without any dead port issues but I can't use it for waking the computer (does not trigger wake up), but I simply prefer to use one of the equipped USB ports for my keyboard.
I have 2 external FireWire HD's connected at times, one daisy-chained to an external FireWire CD Burner. I have a USB 1.1 hub connected to the other equipped USB 1.1 port, and a USB 2 PCI card installed.
I run system maintenance tasks frequently (Onyx) and repair permissions prior and post SW installs and updates.
Thanks for any input.

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

Windows 8 Dpc Watchdog Violation error

please i would like to know how to fix this watchdog violation error i am getting since monday.
here is the link to dump files
http://www.mediafire.com/download.php?ney1rln6fgumnsn

* Bugcheck Analysis *
DPC_WATCHDOG_VIOLATION (133)
The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL
or above.
Arguments:
Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
component can usually be identified with a stack trace.
Arg2: 0000000000000283, The DPC time count (in ticks).
Arg3: 0000000000000282, The DPC time allotment (in ticks).
Arg4: 0000000000000000
Debugging Details:
DPC_TIMEOUT_TYPE: SINGLE_DPC_TIMEOUT_EXCEEDED
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x133
PROCESS_NAME: avgnsa.exe
CURRENT_IRQL: d
TAG_NOT_DEFINED_c000000f: FFFFF800EF4A0FB0
LAST_CONTROL_TRANSFER: from fffff800ef7dd6ef to fffff800ef684040
STACK_TEXT:
fffff800`ef4a0618 fffff800`ef7dd6ef : 00000000`00000133 00000000`00000000 00000000`00000283 00000000`00000282 : nt!KeBugCheckEx
fffff800`ef4a0620 fffff800`ef6aff06 : 00000000`00000005 00000000`0003fb67 fffff800`ef4a07a0 fffff780`00000320 : nt! ?? ::FNODOBFM::`string'+0x13c80
fffff800`ef4a06a0 fffff800`efd74eca : fffffa80`04d16870 00000000`000000dd 00000000`8068aecd 00000000`00000001 : nt!KeUpdateTime+0x41b
fffff800`ef4a0890 fffff800`ef67dbfa : 00000009`7a925d51 00000000`89ed155a fffff800`efd9e580 fffff880`00000000 : hal!HalpTimerClockInterrupt+0x86
fffff800`ef4a08c0 fffff800`ef673903 : 00000000`00000001 fffff800`ef88d000 00000000`00000001 00000000`00000000 : nt!KiInterruptDispatchNoLockNoEtw+0x1aa
fffff800`ef4a0a50 fffff800`ef6b0315 : 00000000`00000002 fffff800`ef88d000 fffff880`01541180 fffff800`ef6ad033 : nt!KxWaitForSpinLockAndAcquire+0x23
fffff800`ef4a0a80 fffff880`01b68ff2 : fffff800`ef4a0b49 fffff800`ef8ff180 00000009`7494f883 fffff800`ef88d000 : nt!KeAcquireSpinLockRaiseToDpc+0x35
fffff800`ef4a0ab0 fffff880`019b3626 : 00000000`00000000 fffffa80`03fe33f0 fffffa80`03fe3280 fffffa80`03fe33f0 : tcpip!TcpEnqueueTcbSend+0x72
fffff800`ef4a0b80 fffff880`019b307b : fffffa80`042651a0 fffffa80`04d16870 00000000`00000000 000009a8`73d17274 : NETIO!StreamInjectRequestsToStack+0x23e
fffff800`ef4a0c60 fffff880`019b2f21 : fffffa80`042651a0 00000000`00000000 00000000`00000008 ffff87fc`ec58fef4 : NETIO!StreamPermitDataHelper+0x5f
fffff800`ef4a0c90 fffff800`ef679f38 : fffff800`ef901f00 fffff800`ef4a0e00 fffffa80`090463a0 00000000`00000000 : NETIO!StreamPermitRemoveDataDpc+0x81
fffff800`ef4a0d00 fffff800`ef6aaeb0 : fffff800`ef8ff180 00000009`532a8f50 fffffa80`073b4680 00000000`00000025 : nt!KiExecuteAllDpcs+0x198
fffff800`ef4a0e40 fffff800`ef6aa8a5 : 00000000`00000000 fffff800`ef8ff180 fffff880`0c8bc270 fffffa80`090463a0 : nt!KiRetireDpcList+0xd0
fffff800`ef4a0fb0 fffff800`ef6aa6a9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxRetireDpcList+0x5
fffff880`0c8bc1c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchInterruptContinue
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!StreamInjectRequestsToStack+23e
fffff880`019b3626 8bf0 mov esi,eax
IMAGE_NAME: NETIO.SYS
fffff880`0197b000 fffff880`019ea000 NETIO (pdb symbols) c:\sym\dl\netio.pdb\F6A6ADDF9B3C4AECAFFCADC1489938262\netio.pdb
Loaded symbol image file: NETIO.SYS
Mapped memory image file: c:\sym\dl\NETIO.SYS\507656246f000\NETIO.SYS
Image path: \SystemRoot\system32\drivers\NETIO.SYS
Image name: NETIO.SYS
Timestamp: Thu Oct 11 07:16:20 2012 (50765624)
CheckSum: 000798F6
ImageSize: 0006F000
File version: 6.2.9200.16433
Product version: 6.2.9200.16433
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: netio.sys
OriginalFilename: netio.sys
ProductVersion: 6.2.9200.16433
FileVersion: 6.2.9200.16433 (win8_gdr.121010-1704)
FileDescription: Network I/O Subsystem
LegalCopyright: © Microsoft Corporation. All rights reserved.
Update all your network driver and tools like AVG.
"A programmer is just a tool which converts caffeine into code"

[SOLVED] Xbox 360 Wireless Controller, how to make it work?

How can I get this to work under Arch? the controller gets detected at /dev/input/js0 and I if cat the file I get a bunch of symbols (which I read that means it works).
However, I can make it work with anything, am I missing something?
It even gets detected as: Bus 004 Device 003: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter
The light on the controller keeps blinking but thats normal also.
If anyone can help out with this I would really appreciate it.
thanks for the help
Last edited by 655321 (2013-01-14 20:14:29)

Already read that but didn't help. However I found the problem. Controller wouldn't sync with the wireless receiver. I ended up using xboxdrv userspace driver and after sync it worked like a charm, even the xbox light stops blinking and stays fixed on the player 1
thanks for the help

[SOLVED] Booting from Asus U3S6 SATA Controller fails

Since the SATA controllers on my mainboard stopped working yesterday, I bought a Asus U3S6 Controller in the hope to work around the problem in this way. The drive is detected by the BIOS and GRUB is invoked correctly. However, when I try to load the kernel, I get following message:
Waiting 10 seconds for device /dev/sdb3 ...
ERROR: Unable to find root device '/dev/sdb3'.
You are being dropped to a recovery shell
In the recovery shell I cannot find any disk device under /dev/. Is this kind of booting supposed to work? When is the PCI controller actually detected and activated by the kernel?
Any help appreciated!
Last edited by smyp (2014-02-01 07:53:22)

I solved the problem.
I used used the chroot guide to modify my environment:
I had to add ahci to the list of modules in /etc/mkinitcpio.conf and rebuild it with
mkinitcpio -p linux
This will then load the AHCI module at boot time and enable the SATA devices.

How to configure HA between local controller and remote controller in DC

Good day,
If I have two Cisco 5508 Controllers, running Software version 7.4, how would my failover happen when the AP's run in local mode, and the local controller fail, and you configured your remote controller as your secondary controller. Question is, will the APs automatically convert to FlexConnect mode when they failover to the remote controller in the DC? I know you cannot configure HA as the controllers have to be connected with ethernet copper cable on the redundancy port, giving you a distance limitation of 100m.
Thank you in advance
Adrian

Hello ,
As per your query i can suggest you the following solution-
In wireless network deployments that run controller versions earlier than 5.0, when a controller goes down, it takes a long time for all the APs and the associated clients to move to a backup controller and for wireless service to resume.
The features discussed in the document are implemented on the controller CLI in WLC software release 5.0 in order to decrease the time that it takes for access points and their associated clients to move to a backup controller and for wireless service to resume after a controller goes down:
In order to reduce the controller failure detection time, you can configure the heartbeat interval between the controller and access point with a smaller timeout value.
In addition to the option to configure primary, secondary, and tertiary controllers for a specific access point, you can now also configure primary and secondary backup controllers for a specific controller. If the local controller of the access point fails, it chooses an available controller from the backup controller list in this order:
•o primary
•o secondary
•o tertiary
•o primary backup
•o secondary backup
The access point maintains a list of backup controllers and periodically sends primary discovery requests to each entry on the list. You can now configure a primary discovery request timer in order to specify the amount of time that a controller has to respond to the discovery request of the access point before the access point assumes that the controller cannot be joined and waits for a discovery response from the next controller in the list.
Hope this will help you.

K9A2 Platinum BSOD with SATA LH-20A1L; cant detect eSATA in XP

Hey everyone, I need some assistance, please.
I am building two identical systems and I am having the same issues with both. I have rotated components and get the same results. Here's what I bought from Newegg:
K9A2 Platinum
Phenom 9600 Black Edition
4GB(2x2GB) G Skill DDR2 1000 running dual channel
Sapphire Radeon HD3650 512MB
WD Caviar SE 500GB 7200RPM 3.0 SATA x3
Lite-On LH-20A1L-05 SATA
CoolerMaster Case
Corsair vx550w psu
Win XP pro 32 bit
So I had a little trouble getting the raid array built with the two WD 500GB drives but I resolved it by disabling the extra Raid control function in the BIOS. So I got a raid 1 array on two of the connections, the SATA optical drive on another, and the eSATA port that is on the case plugged into the fourth purple connection. Nothing is plugged in to the two red connections. All my issues seem to regard the SATA controller in some way.
The first issue is that whenever I open and the close the cd tray, XP BSDs and says there was an IRQ error. I have installed all updates for windows and the firmware is current on the drive. I tried putting an IDE optical drive in and did not receive the error. I'll probably stand the systems up with the IDE optical drives but I eventually want to get the SATA in there due to the high amount of burning that will be done.
My second problem is with the eSATA connection. I have the third WD500 in an external enclosure that will connect via USB but not through the eSATA cable. I have checked disk management and nothing.
Again I have two of the identical setups and I have been trying different variations of BIOS settings and have not had much luck. I do want to commet about the BIOS though. I'm not sure why, but sometimes some of the settings seem to change without my input. I'm not sure if this is because I am changing on thing and that automatically changes some other setting... anyway, I would be very grateful to anyone that can help me with any of these issues. Thanks in advance.

thanks for the quick response. I appreciate the help.
one question though. If the eSATA has to be on the promise then if I moved my two hard drives I would lose that function. So, I decided to move the optical drive and the eSATA to the promise and left the RAID set on the SB600. Enabed the extra raid controller, It detected the drives and booted windows fine, only now there is no optical drive in my computer or disk management. The optical drive is deteced by the raid controller and shows as a boot option in the BIOS, just won't show in windows. ALso the eSATA still doesn't show.
I'm going to try a few different configurations and see if I can get some forward momentum built here. thanks for the advice.

CSCur17253 - 8.1.10.20 controller Watchdog detected LOCKUP !!!!!

Similar Messages

Maybe you are looking for