CSM 4.2 - Activity Change Report

Hello everyone,
Just looking if there is any possibility to configure CSM (v4.2) to include in generated pdf 'Activity Change Report' (checking during approval process what is going to be change/added/removed...) also what commands are going to be deployed by such change?
So generated PDF will have also output from "Preview Configuration" where all commands can be seen.
Haven't seen such option in configuration of CSM and for someone it can be helpful to briefly review what commands are going to be added before deployment.
Is there such option to include it in generated PDF or not? :-/
Thanks in advance for any advice

The minimum idle timeout is 4.
0 means infinite and all values below 4 are swaped with a value of 4.
You can see the current value with the following command:
gdufour-cat6k-2(config-module-csm)#vser test
gdufour-cat6k-2(config-slb-vserver)#idle ?
<0-13500000> idle timer value in seconds (0 is infinite(!!) default is 3600)
gdufour-cat6k-2(config-slb-vserver)#idle 1
gdufour-cat6k-2#sho mod csm 3 vser name test det
TEST, type = SLB, state = OUTOFSERVICE, v_index = 15
virtual = 1.1.1.1/32:0 unidir, UDP, service = NONE, advertise = FALSE
idle = 4, replicate csrp = none, vlan = ALL,
^^^^^^^^^
However, I have to admit this is strange to allow the configuration of a value of 1 and then silently change the value to 4.
I'll check what we can do.
Regards,
Gilles.

Similar Messages

Historical User Changes Report

I would like to create Historical User Changes Report for all objects. This means that I don't want to fill the value of the field "Object Name" which is required.
It's logic that I should fill this field but there is a saved report named "Historical User Changes Report" in IdM which doesn't have this field filled. If I open this report and just click on the Save button, I get an error.
How does Sun create this report without filling "Object Name" field?

Try Today's Activity Report...
In the Actions select login
In the Report Timeline there's calendar to select the date

Activating 'change documents' for notification item class 015

Dear Experts,
Kindly help me in activating 'change documents' for notification item class 015.
Thanks and Regards,
R N Sabat

Hi R N Sabat
The creation of change documents for the classification has to be
activated for every class type. Go please to the customization of the
appropriate class type:
Cross-Application Components
-> Classification System
-> Classes
-> Maintain Object Types and Class Types
You will find there a flag to activate change documents.
As a precondition you'll have to activate the flag 'Multiple objects
allowed' before. If you already have classified objects
for this class type these classifications has to be converted before.
For the conversion of already existing classifications use please report
RCCLUKA2. It processes the conversion and sets the flag 'Multiple
objects allowed'. Regard please the documentation of report RCCLUKA2.
Thereafter you'll be able to activate change documents for this class
type.
Please check the 2 notes :
80907 Setting the several objs.for each class type indctr
65124 Classification Change Documents
If you have any questions , please let me know .
Enda.

Help with CSM 3.2.2 - Changes created after Device Discovery

Hi
Hope someone can help, I have just installed CSM 3.2.2 and added many multiple firewalls to the database, I have not created any overall policies yet. Once these additions were made I could see over 500 changes that CSM wanted to make in the Activity List after viewing the changes. A great deal of these were changing the local firewall objects . It looks like that as identical names were used forsome of the local firewall configs, CSM needed to amend these with a unique name for each firewall so adding on -1, -2 e.t.c It also struggles with some of the AAA settings and IKE. I don't want to submit these changes due to the huge risk that involves but also not sure whether to dicard the changes ? Any advice out there ?
Thanks in advance
C

Hi Chris,
what you are observing is usually normal. CSM tries to reuse the names on the FW to give a name to the objects in the DB. If you import two FWs with some things named in the same way (e.g. OBJECT-NAME) but with different content, CSM will import the first object as OBJECT-NAME and the second as OBJECT-NAME_X where X is a sequential number. CSM then, for consistency, will try to push the new name to the device as well.
Another thing you might notice is that CSM is try to change the access-list by grouping services in a different way.
I would say these are normal operation however I would suggest that before the first deployment you look at the preview of what will be pushed and carefully verify that everything is in place, although slightly modified.
Stefano

Different behaviour between activity "Change Production" and web-service

Hello!
We are using SAP ME 5.2.6.1 (SP06 Patch 1) - the newest version of SAP ME 5.2
In activity "Change Production" (SU540) it is possible to change shop order, material and router of SFC's.
This also works for SFC's in status DONE if the following activity rule is set
ALLOW_DONE_SFCS = TRUE.
Nevertheless if the same is tried via "Production XML" or with the given web service an error is displayed
and the operation is not performed.
When using "Production XML" the following error is shown:
Cannot change Done SFCs (Message 15050)
When using the web service (http://<host>:<port>/manufacturing-services/ProductionServiceService)
the same error occurs. I think the web service is the prefered way in the future.
For me it seems that only with the GUI activity SU540 the rule "ALLOW_DONE_SFCS = TRUE" is effective.
But should the behaviour not be identical regardless if this was initiated from the GUI or from the web service?
So is this something like a bug or is it "behaviour by design"?
If the latter is the case:
Is there a workaround possible to achieve the same outcome via webservice?
Kr,
            Erich Lind
Edited by: Erich Lind on Aug 5, 2011 10:37 AM

Hello!
From the SAP ME Transaction Log Report:
Concerning the "Production XML" interface - it uses the ChangeProduction EJB.
I assume the web service internally will do the same ...
class com.sap.me.frame.BasicBOBeanException message: com.sap.me.frame.BasicBOBeanException: Error 15050Cannot change Done SFCs (Message 15050)
     at com.sap.me.production.ChangeProductionSOBean.validateSFCList(ChangeProductionSOBean.java:1413)
     at com.sap.me.production.ChangeProductionSOBean.validateXMLProductionChanges(ChangeProductionSOBean.java:255)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:592)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
     at $Proxy3489.validateXMLProductionChanges(Unknown Source)
     at com.sap.me.xchange.ProductionFacadeSOBean.processChangeProductionMessage(ProductionFacadeSOBean.java:997)

Active vendor report

Hi Guys:
Is there any t-code or table i can check Vendor No, Vendor name and Date of the last payment made for all the vendors belong to one company code?
In LFB1, i can find the vendor details under the single company code, but i can not find any field can stand for Date of the last payment made, which means i need to see active vendor report.
Forrest.

in sap, if one vendor is given with the payment very long back, unless the vendor is marked for deletion either at company code level or purchase organisation level , it is said to be active.,Is it possible for you to search based upon this criteria at TABLES LIKE lfa1, ;fb1,lfm1etc.Or else better to check with FI tables .

What is a "logged in user" on the "Active Sessions" report in CF8 Server Monitor?

I was looking at the Active Sessions Report (The Chart View) and saw I have more "logged in users" than "active sessions".
I had expected them to be nearly the same.    It's on our Intranet where I log users in (using cflogin and cfloginuser) at the begining of their session and users should be logged when the session ends.
I couldn't find a detailed explaination of what a "logged in user" means.   There is a chance that the same user is logged into a nested application as well as the Intranet, but I don't think that is what I'm seeing.
I also don't see a way to get a list of what CF is counting as a logged in user. I can only see a way to get the total count.
Any help is appreciated.
Thanks,
Jeff

Thank you Michael for the reply, but I don't think that is the issue.
When a user opens their browser on the intranet, a session begins and they are logged in (using the cflogin and cfloginuser).    If they close their browser, the session should hang around for 20 min. (per the server setting).   I am assuming this is still considered an "Active Session" since I can see this behavior in the report.
At first, the Active Sessions and Logged In Users are exactly the same.   When the sessions start to time out, the active sessions are reduced, but the Logged In Users remain the same.    Then, after a while, they start to move together. So I have more Logged In Users than Active Sessions.
I left the Server Monitor open last night and for most of the night, I had 0 sessions, but 57 "logged in users".   This morning, as people opened their browsers, the Active Sessions and Logged In Users moved together.   The gap of 57 looks consistent.
It looks like people are remaining logged in after their session ended.
I am really looking for a detailed explaination of "active session" and/or "logged in user" as used in the server monitor. It would be really nice to find a way to list the details about each item counted in the "logged in user" and not just the total count.
Thanks Again for your reply.
jsm

Purchase order price change report

Hello
How to retieve the purchase order price change report ? do we have any standard report for it or any table which gives these data?
kindl

HI
Have you activate version management at your end for PO,i think this will help you to track changes of PO for qty,price etc.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/Version+Management]
Regards
Kailas Ugale

Change report S_ALR_87012168 - 0SAPDUEAN-01

I am in FDI2 for changing report 0SAPDUEAN-01-Due Date Analysis for Open Items. I would like to add one more characteristic in the list available in the right hand side. Currently there are only 26 characteristics available for selection

Hi Suma,
In my last project I worked a lot on that to add new characteristic but I didn't get in clue. If you get any idea that would be great.
Best of luck
Sreenivas

How to change report displayname at runtime when run from the report server?

hi all,
with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
        private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
            string po = e.Parameters["Order"].Values[0];
            this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
thanks for any tips,
sff

Hi sherifffruitfly2,
According to your description, you want to change the display name of report in Report Manager. Right?
In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
It will show the report name with execution time when we run the report:
Reference:
Built-in Collections in Expressions (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How can I change reports in report painter.

Dear Consultants,
I need to change report according to client requirment.
1, Lay out change in std report.
2, How can I customize report to get cost element group wise with sub totals one by one.
Please tell me how to do it step by step, I'll will award full points.
Kind regards,
Arvey.

Dear Arvey,
1. Layout can be changes by going into report painter change transaction GRR2, selecting the report (by double click) and then going to Formatting-->Report layout.
2. Second question is not very clear to me. pls provide more detail.
Regards,

Active user report has different responsibility start date than inquiry for

hi,
I have a user for whom I see a different responsibliy start date in user inquiry form than what I see in Active user report for the same user.
Any idea why it is this way?
This tells me that inquiry forma and active users are pulling responsiblity start date from different place.
Please help this is a big problame for audit.

Hi,
Please mention the application release.
Have you verified the value from the application (Security > User > Define)?
If possible, please post the query you use to get the start date.
Regards,
Hussein

Active Crystal report

What is active crystal report ? How to start? How it works?

Hi Ranpoo,
Follwoing are the answers for your post
What is active crystal report ?
At present you can buy CR XI R2 and Crystal Repors 2008
How to start?
You can download a trail version of CR2008 and install in your system from below link.
http://www.businessobjects.com/campaigns/forms/downloads/crystal/2008/default.asp
How it works?
IT WORKS GREAT.
Thanks,
Sastry

Trying to Add IBAN Field to Vendor Changes Report

Hi,
I need to add IBAN field to vendor changes report (S_ALR_87012089).
These are the steps I took:
1) Go to OBAT and add new field group
2) Go to OBAU and add new fields to field group created in (1)
However, TIBAN fields cannot be added to the field group.
Are there any workarounds?
Thanks.

No solution except customization

How to use Prompts in the Filter created in Change Report Properties

Hi all,
I have created one Datetime prompt in Change report properties dialogue box.
Now how can I use this same one in the filter ??
Since I didn't get Surface and Prompt option for the Date field in the filter.
Any help is appreciated.
Thanks

Actually problem is with Datatype..It was timestamp but it should be Datetime

CSM 4.2 - Activity Change Report

Similar Messages

Maybe you are looking for