CSM is stripping tcp options when stickyness is configured

Hello,
I've found, what i think is a bug, in our CSM and want to share, and hopefully you've something to add (or solve?)
cisco CSM software 4.2.11 on a 6509 chassis, software 12.2.18 SXF15a
When configured a VIP with either ssl stickiness or regular stickiness, i noticed that the CSM is stripping all tcp options (except mss) in the first tcp/ip syn packet.
so, loosing tcp options like: Selective ACK, window scaling, tcp timestamps, which are the basics of high performance TCP/IP.
Without stickness, the tcp options are not touched.
Does anyone recognize this phenomena ?
Any Idea's?
PS: i noticed this after a complaint of a very slow website hosted by us in combination of some packetloss at the client.
Regards,
Arjan Filius

Hello,
Thanks for your reaction and questions.
I took only some "random samples" and noticed the difference (finally after "some hours" that:
-Sticki configured VIP/serverfarm, accessed on the VIP will strip all tcp options.
-accessing the real servers not.
as it concerns (in hour case) all same NIC's, NIC/server/client issues are excluded.
In our case there is no other device involved (with the two cases, via VIP and direct to real) othere then die CSM itself.
Regards,
Arjan Filius
PS: i'm a month on holiday after today, a colleague will attend this thread.

Similar Messages

Why does StreamSocket::ConnectAsync set up two TCP connections when proxy is configured in system?

Hello, Dear all,
Per my test, the proxy for HTTPS will be selected as the actual used one for the out-going packets if we do the following test in an corporate network environment. Two connections will be set up: one is with the proxy, the other one is with the target address.
Some info about my env:
1. the configured proxy could only be accessed in the corporate network;
2. the target host has both private and public IPs;
3. I don't check whether there is proxy configured in code.
4. the issue could only occurr in the private network; If I do the test out of the corporate network, the behavior is correct because no proxy is configured. But I am not sure whether the issue would occur if there would be a usable proxy configured.
The repro steps are:
1. Create a Windows Store App project with VS2013. The testing code is pretty simple as the following:
using namespace Windows::Networking::Sockets;
StreamSocket^ streamSock = ref new StreamSocket();
IAsyncAction ^sconn = streamSock->ConnectAsync(
ref new Windows::Networking::HostName("10.1.2.3"), "56789",
SocketProtectionLevel::PlainSocket);
The target address and port (10.1.2.3:56789) could be any meaningful or bad one. We only need to observe the packet sent out from the client side in the following steps.
2. Configure the proxy in Internet Options -> Connections -> LAN Settings -> Advanced -> Secure. Give a good proxy/port to it;
2.1. Run the program and capturing the packet from Wireshark or other tools.
   ==> You will see that a HTTP request with header "CONNECT" is sent to the proxy. That's to say, the client will connect to the proxy.
   ==> You will also see that the client side also sent out a TCP SYN packet to the remote target address (10.1.2.3:56789).
3. Disable or remove the proxy setting;
3.1. Run the program and capturing the packet from Wireshark or other tools.
   ==> You will see that there would be no HTTP request sent out.
I am using Win8.1/VS2013 and the system is up-to-date... I am not sure the behavior is designed as this, or it is a bug of the StreamSocket?
BTW: I didn't use Windows::Networking::Connectivity::NetworkInformation::GetProxyConfigurationAsync on purpose.
For the classical WinSock, we could only see the TCP SYN packet in step 2. That's to say, the behaviors between StreamSocket and WinSocket are different.
Thank you all.

A workaround to avoid proxy connection requests from being sent out is to use the
ConnectAsync(Hostname, String, SocketProtectionLevel,
NetworkAdapter) method with a specific adapter. The proxy-related logic is disabled when a specific network adapter is selected.
You can retrieve the main active network adapter by calling GetInternetConnectionProfile() and then referencing the NetworkAdapter property of the returned information:
ConnectionProfile^ connectionProfile = NetworkInformation::GetInternetConnectionProfile();
NetworkAdapter^ adapter = connectionProfile->NetworkAdapter;
You could also enumerate all possible adapters and try to connect on each of them, one by one:
for each (HostName^ localHostInfo in NetworkInformation::GetHostNames())
if (localHostInfo->IPInformation != nullptr)
NetworkAdapter^ adapter = localHostInfo->IPInformation->NetworkAdapter;
// Attempt to connect with this adapter.

"New Project" choose option & when choose new, "Electric Guitar" -nothing!

Hi, Please would someone help me figure this GB preview/problem out?!
GB was fine for a few months, new computer etc but then...
here it is:
One day when I opened GB, i selected 'electric guitar' icon option in the 'new project' section where you can choose 'software instrument',
'real instrument' and 'electric guitar' options
to start the project off with, clicked 'choose' and nothing happened.
So i chose a normal one and went in and tried to get up a 'new track' and selected 'electric guitar' from there, but nothing. No amps or pedals anywhere in the right hand list section. Normal/software tracks opened and worked ok.
Now there are no icons/options in the 'new project' window,
at all!
It's dark grey - but if i double click on the 'new project' button on left list,
it brings up a basic style project name/signature/tempo etc window and then when it opens - does with software track.
So if i choose 'new track' from Track menu and select 'electric guitar' from the drop down preview tab thing w pictures like the preview thing used to be on the 'new project' window used to have, it doesn't do anything 'cept bring up the keyboard...
All the 'magic' and 'learn to play' etc options come up with preview choice/options when clicked but not 'New Project'.
Any ideas anyone?! This is what i've tried so far:
1. i've deleted garageband plists except the one that says "com.apple.garageband.LSSharedFileList.plist" cus i don't know what that one is exactly -
Is it safe to delete it?!
2. repaired permissions
3. Thought about other apps that might be causing probs - uninstalled a Guru drum thing -still no luck-
4. in the library and i can't find 'electric guitar' folder
in any of the application support folders...
5. and wondered - I installed a retail copy of Logic Express 8
so i thought perhaps that was something to do with it...
can't remember if that was around the same time - maybe - but
it's so difficult to use and i'm learning it o so slowly - i really need my faithful ole GB to work
in the meantime!!
Would appreciate any info/ similar experiences, solutions etc,
before i resort to a GB re-install from disc
(if that's possible from the ones that came with the computer, perhaps...???)
Thanks in advance for helping a girl with a guitar
who doesn't want to **** her neighbours off....

likeawave wrote:
I installed a retail copy of Logic Express 8
http://www.bulletsandbones.com/GB/GBFAQ.html#missingtemplates
(Let the page FULLY load. The link to your answer is at the top of your screen)

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

I uninstalled bootcamp but when my MacBook Pro starts up, I still have to press "alt/option" when the screen goes grey. Otherwise, a black windows screen pops up. What am I doing wrong?

At one point in time, I believe I had attempted to install bootcamp on my MacBook Pro. My university support center said that I had to press "alt/option" when starting up everytime, otherwise it would be a black windows screen and I had no idea where to go from there. (So I never was able to fully utilize the Bootcamp application. Unfortunately, even after I uninstalled bootcamp, this is still happening. How do I fix this? Thank you.

You should have asked us and looked at 10 posts a week -- same as yours.
OS X: System Preferences: Startup Disk control panel
Set and done!
x = Mac OS X on startup also
And no to needing to hit Option every time. Obviously they never actually booted and used Mac.
All it was is the startup parameter was saved and still set to look for a partition that does not exist and got lost.
ZAP PRAM is also helpful but you would still use Startup Disk.
About This Mac.... More... will also take you to control panels (why System Prefs if they are control panels? to be different?) as well as S.P. from the Dock

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

I cannot delete songs from my iphone via itunes, but can with my ipod and regular library. The option when I right-click isn't there ONLY with the iphone, any ideas how to get back this option?

Can anyone help me get back the options when I right click with my iphone with itunes that drop down menu has oly 3 features and none is what I want or need?
This happened since the last update.
Geoff

I am facing the same problem, please help us ...

How to hide Database Logon option when scheduling Crystal Report in BOE?

Hi All,
For security reason, we are try to hide the Database Logon option in Crystal Report Schedule page in InfoView.
There is option in CMC which we can configure the default Database logon option so that users do not have to enter the logon everytime they view or schedule the report. However, we are looking to hide this option completely.
Does anyone know if there is a security setting which can hide the option from specific users?
Thanks,
Bobby

Hi Bobby,
As Jorge informed that there is no method available within CMC to hide database logon option when scheduling or viewing a Crystal Report in the Info view. This is very much true.
But as you also mentioned that you don't want your users to enter the database logon credentials evertime they view or schedule a crystal report, there is one setting in CMC which we can do to avoid prompt for database logon credentials.
CMC - Home - Go to that specific crystal report - Click Process tab - Click the sub-tab 'Database' and at the bottom of the page there is an option "Use same database logon as when report is run". Check this option after providing the database credentials and click UPDATE.
Now whenever users try to view or schedule this specifc crystal report they won't be prompted for the database logon credentials.
Regards,
Venkat

Lightroom no longer offers options when choosing an image to edit in Photoshop

For some reason Lightroom no longer gives me any options when I select the 'edit in photoshop CC'. It automatically opens the image with the lightroom settings applied but i want to edit the original without any lightroom effects applied.
I have Lightroom 5 and photoshop CC both with camera RAW 8.7.1

It has always allowed me in the past to send an image i am working on in LR to PS (I would choose to edit the original) the when saved down in PS it would then update the version in LR with the LR effects added as well. Suddenly it no longer gives me the option to 'edit the original '. I have always worked in RAW

How do you delete a purchased song that doesn't have a delete option when swiping? This was a freebie when I first purchased my pad

How do you delete a purchased song that doesn't give you the delete option when swiping? This was a free song when I first got my pad. Now I can't delete it. I only get the play option, or to download it again. The song is "Twinkling Lights", I think that's right.
Any help with this would be greatly appreciated.
Thanks!

I think it is in the cloud, so how do I delete it? Also, I have IOS 7.1.1

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺

Snow Leopard, iPhoto, Mail - loss of image size option when mailing photos

I just installed Snow Leopard on both my laptop and my desktop. Now I have lost one of the size options when I email images directly from iPhoto. This is a big problem for me, as I have the need to send photos out to colleagues for their review several times per week. Before the new OS, I could choose (from within iPhoto or from within Mail) from these options: small, medium, large, and full-size. "Large" was the choice that almost always worked best for me. Now an image is medium-sized no matter whether you choose medium or large. Small and full-size still work.
If I add images to a mail using the photo browser in Mail (which is less convenient for me anyway), then I lose the titles and descriptions I have added to those images in iPhoto. Not good.
Is there a setting I can change, or is this a bug, or what?
Help.
Marion

Ernie,
It's not the the image size buttons are not available. They are. It's that they don't work correctly. From within iPhoto: choosing "small" gives me a small image; choosing "medium" gives me a medium image; choosing "large" also gives me a medium image; choosing "full" gives me a full-size image. So, there are four buttons, but only three sizes. I need large, and it's the one that's not working.
I am currently experimenting with your export-attach suggestion, and the results are very messy indeed as well as inconsistent. If I export an image as .jpeg and as full-size, and then attach them to a mail, the first problem is that I lose all the titles and descriptions, even though I have chosen to export them. In the past, all the images lined up neatly in the body of the message with titles underneath each one; now the images are all "stuck together" and you must mouse over to get the title info. Thus you can see this info for only one image at a time - inconvenient for my colleagues.
The second problem is that, the size option buttons work for some images and not for others. I tried attaching three files of different sizes: 2.7MB, 5.2MB, and 6.2MB. All four size buttons work for the two larger files, but, once again "medium" and "large" choices both result in the same size image, "medium."
Even if the export-attach option worked correctly, it would involve many more steps and much more time than my former method of sending direct from iPhoto.
I have not upgraded to iLife9. Perhaps the problem has been corrected in it. I was holding out for iLife10, but might go ahead with 9 if I could be assured it would work. This is really a huge problem for me.
Thanks,
Marion

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support.

CSM is stripping tcp options when stickyness is configured

Similar Messages

Maybe you are looking for