CSoap Excep Transport Http receive failed with Excp Commc_failure(100.101)

Hi Experts;
Am working with adobe forms. T-code SFP (Form Builder)
I have created a adobe form, Layout and all...
when i Activate the Form, it's not Activating and it's showing the Status information like...
Status Information: SOAP Framework error:SOAP Runtime Exception: CSoap Exception Transport: Http receive failed with Exception Communication_failure(100.101).
Please Give your Suggestions !!
Thanks
Upender.

Hi wd4a Adobe community
here is another guy who has exactly the same problem trying to reproduce the example of: INTERACTIVE FORMS BY ADOBE IN WEB DYNPRO ABAP - INTRODUCTION ( http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/806cf26c-22e7-2c10-8ca3-a671648fd2ea ).
Anyone out in this world who has a suggestion?
thanks in advance ...
Stefan

Similar Messages

HTTP send returned with status code(100,101)

Hi Experts,
I am facing an error in ADS at se38 --> FP_PDF_TEST_00
Test Program: Version Information (for Analysis Only)
SYSTEM ERROR
ERROR CODE : 100,101
ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100,101).
Please let me know how to resolve this issue
Thanks & Regards,
Arun

Hi,
Thanks For your reply..
I tryied but no use
Actually Here i am tryping to do configuration between ECC6 and Bi (ABAP+JAVA) system
Here my Bi system no id different from ECC6 system no.
The steps i did is
1.created ADS HTTP RFC Connection in ECC6 sytem
2. System no. given as BI system no.
3. If i give prefix: /AdobeDocumentServices/Config?style=rpc it is not allowing me to save But i give /AdobeDocumentServices/Config it allows me to save
4.And other settings i followed as document "Configuring ADS for Guided Procedures ''
I am facing same error
Test Program: Version Information (for Analysis Only)
SYSTEM ERROR
ERROR CODE : 100,101
ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100,101).
Please any body know me the solution
Thanks & Regards,
Arun

PI 7.11 - Sync HTTP receiver adapter with response XML file

Hi
We have a File to HTTP scenario in which we need a sync HTTP interface. We send a file to the HTTP address and receive a XML acknowledge. As I read in this forum: sync HTTP interfaces are not possible with the "standard" HTTP adapter. So I found an entry which recommended to use the SOAP adapter instead.
I configured it:
- Do Not Use SOAP envelope
- modules: RequestResponseBeans, CallSapAdapter, ResponseOneWayBean
If i use this scenario, i get following error in the RWB - Message Display Tool:
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getMessageId() of an object loaded from local variable 'message1'.
I testet this scenario using CURL and it worked properly. Should this kind of scenario work with the SOAP adapter or do I need to buy/develop an own adapter? Is in NW7.3 possible to configure sync HTTP scenarios?
Thanks in advance
Michael

Hi
actually i use a simple HTTP receiver CC with the setting "XI Payload in HTTP Body" to send a XML datafile to a webpage (java servlet). This part works fine by now. But, this servlet would also send back a status information to the state of the received datafile, which I like to catch.
e.g. HTTP response from the servlet (catched using CURL):
HTTP/1.0 403 Forbidden
Server: Apache-Coyote/1.1
X-Powered-By: Servlet 2.4; JBoss-4.3.0.GA (build: SVNTag=JBPAPP_4_3_0_GA date=200801031548)/Tomcat-5.5
Set-Cookie: JSESSIONID=OALHMomjR9TVgIATi8SrPQ**.ajp13_ls_1; Path=/ls
Content-Type: text/xml
Date: Tue, 06 Mar 2012 16:19:56 GMT
X-Cache: MISS from proxy.xxxx.com
Via: 1.0 proxy.xxxx.com:xxxx (http_scan/4.0.2.6.19)
Proxy-Connection: close
<?xml version="1.0" encoding="UTF-8" standalone="yes"?><!DOCTYPE transportordersfromls [ <!ELEMENT transportordersfromls (userid, clntid, msgid, (transportorderfromls+ | error))> <!ATTLIST transportordersfromls vers CDATA #REQUIRED> <!ELEMENT userid (#PCDATA)> <!ELEMENT clntid (#PCDATA)> <!ELEMENT msgid (#PCDATA)> <!ELEMENT transportorderfromls (refid, status)> <!ELEMENT refid (#PCDATA)> <!ELEMENT status (ok | error+)> <!ELEMENT ok EMPTY> <!ELEMENT error EMPTY> <!ATTLIST error reason (XMLError | SystemNotAvailable | ApplicationError | OTHER) #REQUIRED message CDATA #REQUIRED> ]>
<transportordersfromls vers="1.0">
    <userid/>
    <clntid>XXXXX</clntid>
    <msgid>0</msgid>
    <error reason="OTHER" message="Access denied"/>
</transportordersfromls>
Michael

Transport of Transformation failed with RC= 12 and job: RDDEXECL cancelled in Target sytem

Gurus,
When i am importing the workbench request from dev to qty.
I am getting error : Program terminated (job: RDDEXECL, no.: 22321300).
Transformation contains only Endroutine.
Job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxxxx were synchronized
The internal session was terminated with the runtime error UNCAUGHT_EXCEPTION (see ST2
Job cancelled.
When i see the dump it is througing errror at the method of following class.
CL_RSO_TLOGO_PERSISTENCY-CHECK_INITIALIZED
Could you please help. Thanks in advance.
Ashok

Hi Ashok,
In QA use program "RSTRAN_ROUT_RSFO_CHECK" to check and remove any inconsistencies for the transformations. After that again transport those transformations in new TR and import in QA.
Also you have to search "Transport of Transformation failed with RC= 12 and job: RDDEXECL canceled in Target system" by Dinesh Tiwari.
Check the reply of Fun Sébastien in http://scn.sap.com/message/13795238#13795238.

HTTP response contains unexpected content-type (100.101)

hello guys,
I need your help on configuring adobe document services which runs on as java 7.3 with a netweaver 7.4 system.
I didnt find documentation for NW7.4, I used this link:
Adobe Document Services for Form Processing - SAP Library
894009 - Adobe Document Services: Configuration
according to note 944221 - Troubleshooting if problems occur in forms processing
I ran:
sa38>FP_TEST_00>>the error is
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)
/sa38>FP_PDF_TEST_00>error
SYSTEM ERROR: SOAP Framework error: SOAP Runtime Exception:
CSoapExceptionTransport : HTTP response contains unexpected
content-type (100.101).
I already check note 1587941 - ADS does not respond or error "CSoapExceptionTransport.."
and enableSSL is false.
the only thing thats different in my case: the rfc ADS does not work with path prefix
/Adobedocumentservices/Config?style=rpc
I left it blank.
thx for any idea
chris

Hi Chris,
What is the connection test response of ADS RFC(404,405,403,200..)?
FP destination services are maintained with correct ADS_AGENT password?
to test prefix path try the URL http://<adshost>:port/prefixpath (eg. http://smprod:50000/Adobedocumentservices/Config?style=rpc)
Regards,
Surya

HTTP Receiver adapter with post

Hello,
I have following scenario.
XI (http receiver adapater) -
> 3rd party web based application.
The 3rd party application expects XI payload to be part of URL with POST Method.
When HTTP receiver adapter sends request to 3rd party application, the URL looks like as follows.
http://myserver:6789/myapplication/name1=value1&name2=value2&.....&name27=value27
I looked at HTTP receiver adpater document on SDN. I see some attributes such as headerfiled1, headerfiled2..... headerfield6 and urlfield1....urlfield6. I have about over 25 fields to be passed with URL.
Now I have following questions.
1. How to make XI payload as name value pairs and part of URL.?
2. I think the default for http adapater is GET, How to configure http adaper to use POST?
I appreciate your help.
Thank you,
Balaji

> 1. How to make XI payload as name value pairs and part of URL.?
You should create the whole URL in a user defined function in mapping.
> 2. I think the default for http adapater is GET, How to configure http adaper to use POST?
HTTP adapter (and SOAP adapter) use HTTP POST. GET is not supported.
Regards
Stefan

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

Import CTS+ transport into Portal failed with Returncode:'12'

Hi, Gurus!
I have encountered the problem while deploying CTS+ transport to the Portal (system XO3): Returncode:'12' class java.io.IOException:
The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.par) does not exist on the filesystem.
Full log text:
| ######################################
| Deployment
| Transport request : BIGK900007
| System : XO3
| tp path : tp | Version and release: 372.04.71 700
| Deploy Service called with following parameters:
| CommunicationData-Type:0
| CommunicationData-Address:http://portalXO3.mycompany.com:50218
| CommunicationData-Host:portalXO3.mycompany.com
| CommunicationData-Port:50218
| CommunicationData-User:'filled'
| CommunicationData-Password:'filled'
| Deployable(0) | Deployable-Type:0
| Deployable-Id:
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par
| Returncode:'12' | class java.io.IOException:The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.p
| >>>ar) does not exist on the filesystem.
| Deployment
| End date and time : 20100106154329
| Ended with return code: ===> 12 <===
| ######################################
The file ctsplus.par does exists at the right place and available from the Portal machine.
Especially strange looks the Deployable-Id: *
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par*
Maybe the different slashes "\" and "/" are the cause of the porblem? Both systems (Portal and Solution manager) run on Windows 2003 Servers.
I have checked the "Note 1232674 - class java.io.IO exception during import" and set up the full control permissions to access "\sapmnt\" for the local (solman) user SAPServiceXO3 but it does not help.
I've created a local "SAPServiceXO3" user in the server of Solman and have given to it highest permissions to the file share. Has anybody any idea how to resolve the problem?
Thanks in advance.
Edited by: Mikhail Palstsianau on Jan 28, 2010 8:47 AM

Hi,
Due you have common trans directory for all the system ???
Thanks
Anil

Citrix receiver fails with mountain lion 10.8

using Citrix receiver 11.6 and ML 10.8.1 to connect to work desktop - when I launch safari, sign in, and attempt to launch desktop, citrix viewer starts, then fails. I get the message below (incomplete) - with a lot more info below - can anyone help please?
Process:         Citrix Viewer [3172]
Path:            /Applications/Citrix Receiver.app/Contents/Helpers/Citrix Viewer.app/Contents/MacOS/Citrix Viewer
Identifier:      com.citrix.XenAppViewer
Version:         11.6.0 (213727)
Code Type:       X86 (Native)
Parent Process: launchd [155]
User ID:         501
Date/Time:       2012-08-29 19:12:06.207 -0400
OS Version:      Mac OS X 10.8.1 (12B19)
Report Version: 10
Interval Since Last Report:          17437 sec
Crashes Since Last Report:           55
Per-App Interval Since Last Report: 23 sec
Per-App Crashes Since Last Report:   47
Anonymous UUID:                      125B52CB-2F88-4D46-99F5-62AFAE6EDB10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00000000acc01000
VM Regions Near 0xacc01000:
    __OBJC                 00000000acc00000-00000000acc01000 [    4K] rw-/rwx SM=PRV /usr/lib/libobjc.A.dylib
--> Submap                 00000000acc01000-00000000acc02000          r-x/rwx process-only submap
    __IMPORT               00000000acc01000-00000000acc02000 [    4K] rw-/rw- SM=COW /usr/l

I had a similar issue and I was only able to connect after a downgrade to Citrix Online PlugIn 11.2.
Today I uninstalled 11.2 (using the Citrix dmg file) and re-installed Mountain Lion 10.8.1.
Then i installed Citrix Receiver 11.6 again. It took me several hours, but it is working fine now.

HTTPS Receiver Adapter with POST and query String

Hi there,
we are currently running a http connection with an external partner. We use the plain http adapter to send documents.
Now we want to secure the whole thing and switch to https.
Currently we solely use the comm. channel in the directory. In the URL we include the required query string (http:/xxx/yyy<b>?msgtype=order</b>)
As I understand, the only way to use httpS is to use a RFC Dest. Type G in sm59.
But I am not able to add a query to the url there.
I guess that it is not an option to ask our partner to search the posted document for parameters. We were already happy that they were able to do it like we have it.
Does anyone has an idea how we could include a query in the url or give somehow the partner explicitly the info about the message type we send?
Thanks in advance,
Helge

Hi Helge,
as far as I know this should be possible with SP16 by using the settings in the adapter configuration.
We had this requirement, but with SP15 it isn´t possible.
Have a look on the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Chapter Adapter-Specific Message Attributes
There you can use up to 6 URL Parameters. I never used it, if you have SP16, try it.
Regards
Thomas

HTTP Receive failed: ICM_HTTP_PROXY_HOST_UNKNOWN

Hi Experts,
I am facing an issue while calling any service in Net weaver gateway system with Gateway client like below.
Can any body please help me to resolve the issue.
Thanks in advance,
Bhaskar N

Hi Bhaskar,
It's a network issue. Looks like the server can't resolve the proxy hostname.
Please make sure the proxy details are correct and the corresponding entry for the proxy server exists in the hosts file.
If you are not able to find the proxy host entry, you need to add it in format of:
IPaddress hostname
For example:
192.168.1.1 cimg.wdf.sap.corp
hosts file located under %SystemRoot%\system32\drivers\etc\hosts
BR,
Alper Somuncu

HTTP response contains unexpected content-type(100,101) in SAP ADS?

Hi,
Our current landscape is SAP ECC EHP7 on SAP NW 7.40 and SAP ADS is installed on Central HUB system which is SAP NW 7.4 SP08 Java Stack System.
We have done configuration on both ABAP & JAVA Stack but when we run FP_PDF_TEST_00 program in SE38 then it's giving the below error
Can anyone suggest me how to solve the above error.
Also please provide any document or link, How to Configure ADS 7.40 in both ABAP and JAVA Stack.
Regards,
Ramana.

Hi David,
Thanks for your valuable replies and help.
I have tested the connection from JAVA Stack system to ABAP Stack. i.e. FP_ICF_DATA_<SID> destination from NWA of Java Stack system and it's connecting successfully.
http:// <ABAP HOSTNAME>:<HTTP PORT>/sap/ bc/fp/form/layout/FP_TEST_03_TABLE.XDP
The above path is working fine.
in the above screen, Destination tested successfully from JAVA Stack to ABAP Stack system.
But the connection from ABAP Stack to Java Stack is not working for which i have created a RFC Destination in SM59 in ABAP Stack system. i.e. ADS and the error is copied below.
I have checked the password of ADSUser in Java Stack system and it's fine.
I ran the report FP_CHECK_DESTINATION_SERVICE and it's giving the below error.
I'm not able to understand what could be the issue.
Can you please suggest me the steps to be done
1. JAVA Stack System
2. ABAP Stack System like any mandatory authorization needed for ADSUSer or ADS_AGENT user in ABAP Stack system to connect with JAVA Stack system.
I think the you mentioned above and the path in the below would be same if not please let me know the exact path and if yes then how could i mention password for ADSUser here.
In the above path, i was not able to find "WS Clients Single Configuration".
Please help me in resolving the above issue.
Thanks in advance.
Regards,
Ramana.

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

Advanced HTTP Receiver Configuration

Hi Experts,
In my Business Scenario I am using the HTTP Receiver Adapter with "Additional Query String Attributes" for adding up the "MessageID" in the HTTP Header(I am not sure whether it will be added there).. and the adapter sends the HTTP data to a URL, where there is a JSP program which takes out the Message ID and stores the data with ID as key in a dataBase.
My Quesiton is - Is their any chance to override the MessageID in the HTTP Header?
And also please refer some documents where can I find the detailed information on "HeaderFields" section in Receiver HTTP adapter... and also how can I see the HTTP Header data which is generated by XI system...
Thanx in advance..

Hi Yuvaraj
Is their any chance to override the MessageID in the HTTP Header?
You can using the Header fields. Add values here
how can I see the HTTP Header data which is generated by XI system..
You can go to SMICM change the trace level to 3 and you can see messages going out of PI.
Thanks
Gaurav

HTTP Receiver Configuration

Hi Experts,
In my Business Scenario I am using the HTTP Receiver Adapter with "Additional Query String Attributes" for adding up the "MessageID" in the HTTP Header(I am not sure whether it will be added there).. and the adapter sends the HTTP data to a URL, where there is a JSP program which takes out the Message ID and stores the data with ID as key in a dataBase.
My Quesiton is - Is their any chance to override the MessageID in the HTTP Header?
And also please refer some documents where can I find the detailed information on "HeaderFields" section in Receiver HTTP adapter... and also how can I see the HTTP Header data which is generated by XI system...
Thanx in advance..

hi
u can see the Header data in SXMB_MONI transaction.
select the IDOC and u can see the complete IDOC information with payloads ,header information,error information for both Inbound and outbound.

CSoap Excep Transport Http receive failed with Excp Commc_failure(100.101)

Similar Messages

Maybe you are looking for