CSS Redirecting Works...but doesn't..

I've got a CSS 11501 with the SSL module. I have a number of urls redirecint from port 80 to 443 any they're working fine.
I've added four more urls and two are working fine and two are giving me a problem.
Suppose the starting url is http://test.com.
This will redirect the address in the web browser to https://test.com but it's just a blank page on the browser. If I highlight the url and hit enter I get redirected to proper page.
Also, if I just start with https://test.com I get there without a problem.
It's almost like everything works except "enter" isn't pressed after the redirect.
The configs are identical to the working ones.
Is there something simple I'm missing?
Thanks,
Greg

You can take sniffer trace for working one and failing one. Then compare the difference.
Perhaps, you show us the config for the content rule doing rediretion. (i.e. content rule and its redirection service). Then I will have a second look.

Similar Messages

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

Asked a mo. ago why hot sync appears to work but doesn't--zero responses from Palm so trying again

hot sync appears to work but doesn't transfer info! Options    dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
hot sync appears to work but doesn't transfer info! Options    dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
I admit, it's been awhile since I synchronized. Just did so, and all appeared right with the world, the handheld made the appropriate noises and showed the appropriate actions and same on the computer (XP, connect as always have through USB). In other words, they appeared to "talk" and said they were synchronizing. But my data (like important calendar entries) is simply not there. Nothing. Nada.  Nothing recently added.
I tried repeating it several times. Yes, I have the system set up so that desktop overrides handheld.  So what's up? Used this a lot in the past, never had this happen.
Thanks for any help.
Using XP and the original hot sync that came with palm and that I've always used--no changes. Help????
Dee
Post relates to: Palm Z22
Post relates to: Palm Z22
Post relates to: Palm Z22

I'm having the same problem though not with the exact same components. I have a Palm Z22 and Windows Vista--things were going great until a few days ago when I noticed that the palm weren't connecting. The Hotsync process proceeds normally, there are no problems noted in the hotsync log, and yet things do not travel from the computer to the palm and vice versa. I've tried pretty much everything: I know the palm is connected to the desktop, not Outlook; I have tried soft and hard resets; I have uninstalled and reinstalled the software multiple times; I know the username is correct.
I suspect the problem has something to do with Vista; when I restored my computer to a previous time it started working fine but this morning it stopped again. The computer may be automatically updating in a way that is preventing the Palm Desktop software (verson 4.2) from working. Version 6.2 seems to work but I really hate it--there's no color schemes or categories. If someone could help me out with this I would really, really appreciate it.
Post relates to: Palm Z22

CSS problem that works but doesn;t

I am beginning to think this is not possible. The code is
below. The images are their but the two side ones are not showing
up or they do not even work like the top leaves. I even dropped the
2 layers lft & rgt inside the top layer that does work and the
top layer still works but the other 2 still don't, puzzling. Here
are the link
http://www.lasalleboat.org/index2.htm
On number 2 the links do not work the leaves layer/DIV/AP
Element is above the links layer
http://www.lasalleboat.org/index3.htm
On number three the links work but they move over the graphic
and the links layer is above the leaves layer
I have tried adding two more layers one on each side of the
page and put thin graphics.png in the layers so they clear the
links and made the leaves graphic crop at the bottom of the trees
line so it cleared the links neither of the two layers I added will
work or show up withe code below so I tried putting the two lft
& rgt layers inside the leaf layer and resize the leaf layer
and that kind works but not you can see this at the next link.
http://www.lasalleboat.org/index4.htm
Any suggestions welcome.
INVT
Attach Code

You can take sniffer trace for working one and failing one. Then compare the difference.
Perhaps, you show us the config for the content rule doing rediretion. (i.e. content rule and its redirection service). Then I will have a second look.

Scan works, print says it works but doesn't

Hi all! Everyone seems to have the opposite problem - wireless printing works but scan doesn't. Not me! I can choose "scan" from my printer OR computer interface and it starts right up. Problem is, when I go to print it goes through the "printing" screen then says "print job complete" (no hangups or errors or something in the print queue to delete - it's in the queue then it disappears as though printed), but...no business results on the printer end!
Before you ask, yes the printer works (can print from SD card inserted directly to printer, or from old computer connected via network). Yes I have turned everything off and back on. Yes I tried downloading the HP print & scan doctor, and it says everything is fine, sees ink levels etc, but its test page behaves the same as any other print job. Yes I have deleted the whole HP shebang and re-downloaded and re-searched/connected my computer via the wireless network. And, as aforementioned, it scans. Oh, and tells me my ink levels! So clearly there is communication, just not for this. What weird sub-setting am I missing?
And also, if you can resolve this, can you give me an idea whether it is suddenly going to start printing the 80 pages or so that I've tried to beam over, so I can stop it? : )
Thanks muchly!
This question was solved.
View Solution.

Hi @theshrew
Please try bypassing the spooler to see if you can print directly to the printer.
1. Click on start and go to devices and printers.
2. Right click on the printer and click on printer properties.
3. Choose the option "Print directly to the printer".
4. Click apply and then ok.
If this works follow the next steps and try to print again.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
If bypassing the spooler does not result in a successful print, let me know.
Also, what printer model do you have? How Do I Find My Model Number or Product Number?
Are you getting any error message, or does a blank page print? The more detail I have the better
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

MacBook water spill - works but doesn't charge. Apple doesn't do partial repairs?

I spilled some water on my MacBook Pro (15in retina).
I let it dry for a couple of days then powered it. It worked.
When the battery got to 0%, I plugged the MacSafe and it didn't charge. It sometimes charges, but intermittently. It charges very rarely.
I brought the laptop to the Apple Store, and they said that it would cost $2000 to repair, because they want to replace EVERY parts that were water stained.
I only want to change the Adapter Port, and POSSIBLY the Logic Board IF changing the Adapter Port didn't fix the charging issue. Knowing the above, it will most likely work, but if it doesn't, that's OK, I'll buy a new one. I'd rather risk $3-400 by doing this and buying a new Macbook IF it fails, than paying 2K for a repair straight away.
Of course my laptop could break eventually if not all parts are replaced, but that's fine (I was able to wash some water stains with alcohol already).
Why doesn't Apple simply change the parts that must be changed, letting the customer take a risk or whatever if he wants so?
IMO -- Terrible policy that must be reviewed.

This is a user to user forum and we are not Apple employees. You may register your thoughts here:
https://www.apple.com/feedback/
Ciao.

No mouse pointer when connected to TV Samsung led40/6500. Mouse works but doesn't show?

Just bought Mac Mini. Connected to Samsung 40/6500 ledtv. using mouse pad but no pointer seen. Finally found the resolution working, but not the right resolution. Should be 1920x1080 @ 60 hz via HDMI. Mac Mini's best is much different from this. How can I find the right resolution on my Mac Mini.

It actually works fine on my sons Lumatron cheap tv! But not on the Samsung led tv?
To start with I used an app on my Iphone to recieve the image from the Mac Mini and then try to find the right resolution on the MAC. Because every time I choose the wrong one the display went black. I could then still see the image on my phone and troubleshoot my way through...

Install 10.4.11 using TDM from G5 to G3.. works, but doesn't take

I cannot use the Installer app, as I said above, will not even open - it just crashes. So, my plan was to put the G3 in TDM with my G5, and run the "combo" updater on my G5 and point it to my G3. That works perfect just as it should.
BUT, when you then cycle the power on the G3 at the end of the install and reboot it, the "combo" update has not taken. Everything seemed to work perfect when I did the install.. but the G3 just does not take it as when I reboot, I am in the same broken 10.4.11 I had from the "incremental" update.
I know this fix of using the "combo" updater will work, as I said did it on another system, but the question is why the G3 is not taking the update despite everything indicating it did? what gives? I would not have to do this if the Installer app worked, but it is hosed.

I know this fix of using the "combo" updater will work, as I said did it on another system, but the question is why the G3 is not taking the update despite everything indicating it did? what gives?
Sorry, you are jumping to the wrong conclusion... it WILL work if something is damaged in the parts of the OS that are replaced by the Combo Updater, but clearly WILL NOT if a part of the OS is damaged that was never Updated!
Appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

OK icacls command that should work but doesn't.

icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t
When some of my systems go to print a PDF the spooler just locks up. I can't control what type of PDF files are coming in as they are made by all kinds of software and so the problems begin. I have been working on a batch file that will stop
the spooler service if it hasn't already, then run the above command to grant rights to the indicated directory so that the offending files can be deleted from the spooler and restart the spooler service after that has happened. The reason for this is
that by default a user can't go in and delete the files. I believe that I have the command correct and it used to work fine in Windows XP and Windows 7 but I can't see why it doesn't work in Windows 8.
Here is the batch file. Please tell me what I have wrong in it.
net stop spooler
timeout/t 3 /nobreak
icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t
c:
cd\windows\system32\spool\PRINTERS
Del *.s*
timeout/t 3
net start spooler
exit

If you run icacls "c:\windows\system32\spool\PRINTERS" /grant administrators:(IO)(CI)(OI)F /t manually,
what output do you get and what is the resultant ACL on the files?
Also, you shouldn't use the /t switch - it tells icacls to recursively apply that ACE for every subitem
in that folder rather than let NTFS handle it via inheritance. The only time you should use it is when you really need to apply a specific ACE explicitly to all items in a folder, for instance:
icacls "C:\temp" /grant administrators:F /t
The above command will explicitly grant Administrators full control on every item in that folder (this
item only - no inheritance).

Entering Registration Code for Quicktime acts like it works but doesn't actually

I've read a lot of these quicktime troubleshooting steps and support Q&A but can't seem to get Pro to unlock. I have verified that I am typing correctly in both the Registered To and Registration Code fields on the register.
When I hit Apply it produces a line of text that says QuickTime 7 Pro, but that's it.
When I hit okay and try to use some of the QT Pro functionality, say file>New Player it still acts like I don't have Pro. if I click About QuickTime it doesn't says 7.7.1 not pro
So heres what I have tried so far. Restarting Quicktime. Restarting the Computer. Uninstalling Quicktime Restarting the computer and Reinstalling Quicktime and trying to register again.
The problem still pursists. I have purchased the Windows Version, am running Windows 7, and have the latest version of quicktime. I don't mind re-doing any of these steps if it will help troubleshoot this problem. What would you suggest to ensure that I can upgrade to QT Pro successfully?

When I hit Apply it produces a line of text that says QuickTime 7 Pro, but that's it.
That's all you get. There is no other confirmation.
When I hit okay and try to use some of the QT Pro functionality, say file>New Player it still acts like I don't have Pro. if I click About QuickTime it doesn't says 7.7.1 not pro
It won't say "pro" anywhere other than a small "Pro" tag on the QuickTime "Q" logo. If the Pro labels disappeared from the commands and they're no longer greyed out, the key was correctly registered.
If "New Player" doesn't work, something else is amiss. First, confirm that the new player isn't just hiding behind an existing one or other window. If that's definitely not the case, do any of the other Pro functions such as Export work? Or are all of the functions not working?
Regards.

Hot sync appears to work but doesn't transfer info!

I admit, it's been awhile since I synchronized. Just did so, and all appeared right with the world, the handheld made the appropriate noises and showed the appropriate actions and same on the computer (XP, connect as always have through USB). In other words, they appeared to "talk" and said they were synchronizing. But my data (like important calendar entries) is simply not there. Nothing. Nada. Nothing recently added.
I tried repeating it several times. Yes, I have the system set up so that desktop overrides handheld. So what's up? Used this a lot in the past, never had this happen.
Thanks for any help.
Dee
Post relates to: Palm Z22

First, let me say I am using the same hotsync program that originally came with this same palm handheld and which has previously worked. So there shouldn't be any incompatability issues.
And the message I get when synchronizing is-----that it is synchonizing and, as usual, it runs through the whole rigamarole, showing it's doing calendar, memo, addins (whatever those are) etc etc.
At the end, it says, synchronization complete!!!!
Again, it makes the little noises to show they are communicating. Everything as it should be, only, the info doesn't transfer.
And yes, the data that I save primarily is on my desktold, in the Palm desktop program that came with the Palm handheld. I want to share, download to my handheld. So--any thoughts?
Thanks again,
Dee
Post relates to: Palm Z22

BB protect works but doesn't show the location

Hello I have installed BB Protect on my 9320. I have also switched on the GPS and the Wifi too. Enabled the Protect too. But when I log on to BB account, it doesn't show me the location of the device. It says unable to track the location. But everything shows fine in the Protect account on my laptop, like I can even see the current correct battery amount. So it means the device does connect with the account but why does it not show the location. What else can I do. I really need it to be working.
Please help. I will be very very very grateful to you. P.S.: I am with Mobilicity in Canada and the phone was purchased from Mobilicity too. Thank you.

Hi there,
There is an option during the setup of BlackBerry Protect that is required to enable this ability. To fix this, go into BlackBerry Protect on the device, press the BB Menu button and select Options, then make sure Location Reporting is turned on.
I hope that helps.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Nvidia is installed and works, but doesn't do 3D

Hello
I have a problem with my Nvidia card. I have the latest driver installed and configured in Xorg, glxgears works (which means it cand do basic 3D, but not any effects or advanced graphics...) and the Nvidia logo shows up at X startup.
But when I try to play a game (for example Enemy Territory gives me error: Sys_Error: GLimp_Init() - could not load OpenGL subsystem) or try to run compiz-fusion, nothing works. Compiz doesn't give me anything - no shadows, no effects, no window decoration. Only 2D games (frozen bubble, wesnoth, gnome games) work.
I also tried to install Xgl, but the wiki says that newer Nvidia cards come with preinstalled Xgl system. (I have a Nvidia m8400gs).
Just for mentioning, everything mentioned (games, compiz) worked under Ubuntu, when I tried 7.10.
So anyone having an idea about my problem, please take the time to show me the solution.
Last edited by phisphere (2008-02-20 12:59:12)

it works fine here, here's my xorg.conf ... i doubt it'll make a difference,
but it contains a few tweaks for performance, so i guess it's worth a shot
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "SendCoreEvents"
Option "AIGLX" "true"
InputDevice "Touchpad" "CorePointer"
#~ InputDevice "stylus" "SendCoreEvents"
#~ InputDevice "eraser" "SendCoreEvents"
#~ InputDevice "cursor" "SendCoreEvents"
#~ InputDevice "pad"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
Load "dri"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
#~ Section "InputDevice"
#~ Driver "wacom"
#~ Identifier "stylus"
#~ Option "Device" "/dev/input/wacom"
#~ Option "Type" "stylus"
#~ Option "USB" "on"
#~ EndSection
#~
#~ Section "InputDevice"
#~ Driver "wacom"
#~ Identifier "eraser"
#~ Option "Device" "/dev/input/wacom"
#~ Option "Type" "eraser"
#~ Option "USB" "on"
#~ EndSection
#~
#~ Section "InputDevice"
#~ Driver "wacom"
#~ Identifier "cursor"
#~ Option "Device" "/dev/input/wacom"
#~ Option "Type" "cursor"
#~ Option "USB" "on"
#~ EndSection
#~ ###
#~ Section "InputDevice"
#~ Driver "wacom"
#~ Identifier "pad"
#~ Option "Device" "/dev/input/wacom"
#~ Option "Type" "pad"
#~ Option "USB" "on"
#~ EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
#Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "NoLogo" "1"
Option "DigitalVibrance" "20"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "TwinView" "Yes"
Option "TwinViewOrientation" "Clone"
Option "MetaModes" "1280x800,1680x1050"
EndSection
Section "Screen"
Option "AddARGBGLXVisuals" "true"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Depth 16
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection

LR 4.4 works but doesn't show photos?

My computer died and needed a lot of work, including a new mother board and new graphics cards. Now LR 4.4 doesn't show photo's. LR seems to be working well in every other way but where the photos should be the spaces are blank. I vaguely remember something like this happening before but I don't remember the solution. Any suggestions?
Thanks,
Doug

The drive names are the same and LR is still listing the HD names and files correctly.
From this screen shot you can see that LR finds the files and their sizes and ratings but there are no images.

BRCM80211 works, but doesn't allow connections

So I have recently found that the brcm80211 driver works for my netbook. I have installed it and it is able to find my wireless network. However, it refused to connect. It's a WEP password, not WPA, so it shouldn't be a problem, but it is. I am absolutely, positively sure the essid and the password are correct, as I have meticulously entered them over and over again. My windows PC also uses the password successfully. Before this I used broadcom-wl which had the same issue.
has anyone had the problem of their card not confectioning to their network and was able to fix the issue?

It turns out that I misread the manpage. The '@' after the permissions doesn't mean soft link, but rather extended attributes. Using 'ls -lO' I could see that a "hidden" extended attribute had been added, which I was then able to remove by logging in as administrator, and typing 'sudo chflags nohidden Data', in the specific case of my Data drive.
Here is more info:
http://discussions.apple.com/thread.jspa?threadID=1324110&tstart=1078

CSS Redirecting Works...but doesn't..

Similar Messages

Maybe you are looking for