Csv file load related issue: giving short dump

Hi Experts,
In BPS I have created a load csv planning function which load data from csv file. While I am executing the function it is showing successful message 'dta records generated' but ehen I press the save button it is giving a dump 'Exception condition "ILLEGAL_INPUT" raised.'.The same planning level and package is working fine with manual planning. The load function modules are also working fine for some other plannig levels. Please suggest what could be the reason for this exception.
Thanks,
Saikat.

I had same problem.
It s something wrong in the CSV files. What I mean is that sometimes it went something like a ',' or a '.' or other wrong characters in some characteristics that cannot accept like numbers or whatever, or something that to you looks a blank but for SAP is some special character.
The way to find is very boring ! Be sure first of all that when you load you do not try to save also the HEADER with Titles of the CSV file. Anyway this was not my problem.
To me happened as follow last time.
" For one rcharacteristic it accept values '1' '2' '3' etc...until '9'. So just numbers. In one of the record of the files it was written '1.' So just the '.' made this big problem. "
To solve this last time, I just generated again the file and without to change the ABAP code it went ok.
Anyway try to check again from benning all your levels and the ABAP code.
I know what u mean, this error cause big headaches, I lost 3 hours to solve.
Hope you are lucky.

Similar Messages

Custom error message in user exit is giving Short dump

Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
         lc_zin           TYPE vbak-auart VALUE u2018ZINu2019,
                     lc_zir            TYPE vbak-auart VALUE u2018ZIRu2019,
                     lc_text(32)    TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF   l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR    vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.

I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
    CLEAR ok_code.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see...

Maintenance View Giving Short Dump DYNPRO_FIELD_CONVERSION

Hi,
Client has a maintenance view for the table J_2IRG1BAL. But the maintenance view is giving short dump DYNPRO_FIELD_CONVERSION. Can anyone please tell me what could be the reason? How to solve it?
Regards,
Sriram.

Hi,
DYNPRO_FIELD_CONVERSION dump may be due to the following reason, you can find few OSS notes
- Negative entry in Time confirmation
- Negative entry in cost
- Negative entry in reversation
Check these just for reference.
Please Refer the below link it will useful for u.
DYNPRO_FIELD_CONVERSION
dump while entering enteries trough sm30
Regards,
Dhina..

CL_GUI_CFW= FLUSH giving short dump

hi,
i have got two servers. one for development and other for quality. in development my CL_GUI_CFW=>FLUSH is working fine, but when i try to execute my prog in quality "flush method" is giving short dump, its returning sy-subrc <> 0.
can anybody suggest possible causes of the same.
The server status are all the same for quality as well as development.
thanks
pratyush

Hello Pratyush
You may want to have a look at my sample report ZUS_SDN_TWO_ALV_GRIDS_3 in thread
[how to refresh the contents of a grid?|how to refresh the contents of a grid?;.
Most control events do not trigger PAI of the dynpro. Thus, they behave similar like calling a search help or F1 help.
The automatic flushing which occurs at PBO is done the following way:
METHOD handle_user_command.
    * define local data
DATA:
ls_row TYPE lvc_s_row,
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
CHECK ( e_ucomm = 'SAVE' ).
CALL METHOD go_grid1->get_current_cell
IMPORTING
es_row_id = ls_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ls_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
PERFORM entry_show_details.
* Triggers PAI of the dynpro with the specified ok-code
" CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not on 4.6c
CALL METHOD cl_gui_cfw=>set_new_ok_code
   EXPORTING
    ok_code = 'DETAIL'.
ENDMETHOD. "handle_user_command
Regards
Uwe

Program giving short dump

I have created an alv grid display .But when am pressing
word processing or excel download buttons in the tool bar ,the program is giving short dump.The display and all are perfect the dump happens only if i press word processing or excel download buttons .Kindly help.
You help will be greatly appreciated.
The error is generated while in standard code.
1095                                     using r_ucomm
1096                                           ls_selfield.
1097
>>>>>   rs_stable-row = ls_selfield-row_stable.
1099   rs_stable-col = ls_selfield-col_stable.
1100
1101   r_refresh = ls_selfield-refresh.
1102   r_exit    = ls_selfield-exit.

Hii
plzz open excel in your computer .
goto TOOLS>MACRO>SECURITY .Make sure that your security is set to Medium (or less). Microsoft has increased their default security setting to High. With the High setting, the output to Excel fails.
plzz paste the part of the code where it is going for dump
and also give the error analysis as mentioned in the dump report
if you want i can give you a sample alv grid program for you can cross chk it
for more refer to this guide
<b>https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf</b>
Regards
Naresh

.csv flat file loading data issue

Environment: SQL Server 2008 R2
Purpose: Load source data which are stored in a csv file to the destination table
Problem: After setting up flat file transformation, including the columns in the output alias, see the following picture:
,because SSIS set datatype to 50 char while the length is 65. I also set up response string filed to 100 in the destination table, An error message showed as the following picture
What I could do differently to overcome this issue. please advise

There are a number of them but not associated with that field
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
1. [Flat File Source [511]] Error: Data conversion failed. The data conversion for column "Version_cd" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
2. [Flat File Source [511]] Error: The "output column "Version_cd" (604)" failed because truncation occurred, and the truncation row disposition on "output column "Version_cd" (604)" specifies failure on truncation.
A truncation error occurred on the specified object of the specified component.
3. [Flat File Source [511]] Error: An error occurred while processing file "C:\Users\data\ETL files\dummydata.csv" on data row 2.
4. [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (511) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
5. Task Data Flow Task failed

Csv file loading issue

I am trying to load data from csv file into oracle table.
The interface executes successfully but the problem is-
there are 501 rows in the original csv file.
When i load it in the file model it shows only 260 rows.
What is the problem? Why all the rows are not loaded?

Just forget about the interface.
I am creating a new datastore of file type.
In the resource name, i m giving my files path.
when i reverse engineer it and check for the data, it shows only 260.
But there are 501 records in my csv file.

IDoc to File, SM58 shows error, ST22 short dump - Runtime error

Hi friends,
I am doing a simple IDoc to file scenario using the EVMSTA01 IDoc. My XI is running on client 100 and I am trying to send the IDoc from the client 200 on the same machine. I have completed the design and configuration steps required and also performed the required steps in Sender client (Sm59, we21 and BD54) and receiver client (Sm59, IDX1 and IDX2).
When I tried sending the IDoc from WE19, status meesage says that, the IDoc has been successfully sent to the receiver but SM58 shows error "IDOC_ERROR_WORKFLOW_START_R". When I looked in to ST22, there was a short dump with the below message -
Runtime Errors         MESSAGE_TYPE_X
Date and Time          18.10.2008 23:24:29
ShrtText
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Unable to read RFC destination WORKFLOW_LOCAL_200
     Technical information about the message:
     Message classe...... "SWF_RUN"
     Number.............. 617
     Variable 1.......... "WORKFLOW_LOCAL_200"
     Variable 2.......... "RFC_READ_DESTINATION_TYPE"
     Variable 3.......... "DESTINATION_NOT_EXIST"
     Variable 4.......... " "
     Variable 3.......... "DESTINATION_NOT_EXIST"
     Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_SWF_RUN_WIM_LOCAL==========CP
     Include                                 CL_SWF_RUN_WIM_LOCAL==========CM07Z
     Row                                     10
Module type                             (METHOD)
Module Name                             IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
rce Code Extract
e SourceCde
1 METHOD if_swf_run_wim_utl_internal~get_system_user .
2   DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4   TRY.
5       IF me->m_int_state-system_user IS INITIAL.
6         me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7       ENDIF.
8       re_user = me->m_int_state-system_user.
9     CATCH cx_swf_run_wim INTO l_excp.
>>       MESSAGE ID     l_excp->t100_msg-msgid
11               TYPE   'X'
12               NUMBER l_excp->t100_msg-msgno
13               WITH   l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14                      l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15   ENDTRY.
16
17 ENDMETHOD.                    "
Any help would be appreciated..!!
PS: Points would be assigned to all the helpful replys without fail

Hi,
See check for RFC destination and it is working as per your configuration or not , i mean , it is trying to locate remote server.. , so try to check in sm59, remote login and the respective result is going to your required client or not ??
Also see the further errors while doing Idoc related scenarios..
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI. Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla

KCLJ giving short dump

Hi Experts,
I am using KCLJ to transfer file data into SAP system through BDT Direct input. I am doing this in Incentive Commission Management system.
I created a sender structure for Commission contract bundle and used this in KCLJ transaction.
But when I am executing the KCLJ transaction I am getting a Runtime error. The Error says that the program could not execute because one of the statements could not be executed.
The Sender structure program is automatically getting generated when i execute the transaction KCLJ with corresponding sender structure. So the program which got generated for this contains syntax errors.
Have you ever experienced any such issues?
Please let me know how to solve this issue?
Thanks & Regards,
Sreejith A P
Moderator message - Cross post locked
Edited by: Rob Burbank on Nov 4, 2009 9:42 AM

Are you sure your connected to the R3 System?
Can you replicate just 1 node?
Can you do any extractions?
The only reference to your error message is below, but not related:
Re: Cube Manage - Dump Error

CJ20N Network creation issue. Short Dump MESSAGE_X; CNPB 011

Hello,
I need your help please.
We have an issue on CJ20N.
We have a short dump MESSAGE_TYPE_X with error message "CNPB 011" in any way we create network on CJ20N (1/ By right click => Network or 2/ Right
click => Copy network or by 3/ drag and drop from templates)
It's noted that:
=> the problem not occurs when we create the network from CN21.
=> We didn't have this problem before.
To avoid the dump and be able access to project, we execute the program that described on note OSS 445323 "Z_DELETE_AFVC_MISSING_AFKO".
After analysis, it turns out that: Records are created on AFVC, AFVV, AFAB, AFVU, JEST, JSTO, etc. BUT NO NETWORK EXISTS IN AFKO for the AUFPL. SO, all is correctly created expect AFKO update.
Can you please help me to see clearly? We don't understand why we have this dump at network creation from CJ20N mainly we didn't have this problem
before.
Thank you in advance for your help,
Amal

Hi Amal,
I would suggest to do the following:
1. Are you getting this DUMP in all of your Clients DEV, Quality and Production?
2. Check if any transport has been moved to Production lately which might have disturbed some settings in PRD Environment if it is happening only in Production Environment.
3. If you are getting DUMP in all of the environments Please raise an OSS with SAP. As what you have described seems to be a Program Bug.
Hope it helps..
Cheers
Sammar

Func. Module - RH_EDITOR_SET giving Short Dump

Hello ,
I am using a container in my proogram.While running this my program calls this function module and then it is giving a shortdump.The short text of that dump says "Exception condition "INTERNAL_ERROR" raised."
the dump is coming at the line:
163     CALL METHOD control_tab-ctrl_new->set_text_as_r3table
164       EXPORTING
165         table           = lines[]
166       EXCEPTIONS
167         error_dp        = 1
168                        error_dp_create = 2.
169     IF sy-subrc <> 0.
>>>>>       RAISE internal_error.
171     ENDIF.
172   ENDIF.
While calling this function module i am passing these parameters.
CALL FUNCTION 'RH_EDITOR_SET'
    EXPORTING
      REPID       = SY-CPROG "program name
      DYNNR       = '0100' "screen number
      CONTROLNAME = VAR " name of the custom control on screen
      MAX_COLS    = COL "variable value = 85
      MAX_LINES   = 10
      DISPLAY_MODE = ' '
      SHOW_TOOL = ' '
    TABLES
      LINES       = IT_LINES_CR. " table type TLINE
The strange thing is that this works fine in 4.6c but is giving a dump in ECC 6.0
Can u please tell me what is the problem.
Thanks in advance.
Kunal

Hi,
There are lot of changes happened between 4.6C and ECC 6.0. so make sure about the dump analysis.
Regards,
Kumar.

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

Set-ADUser based on .csv file - empty attributes issue

Hi, after a few months without working with PowerShell my knowledge is slowly fading away but fortunately every time this happened before, I was able to rebuild my knowledge again and now it is the same story. However I want to optimize my simple
code which populates three AD user object attributes: manager, officephone and fax with values stored in .csv file. Everything works well, but my code looks not so good in my opinion. Is there any more elegant solution?
$AddressBook = Import-CSV -Path D:\AddressBookFinal.csv
foreach($Employee in $AddressBook)
     if([string]::IsNullOrEmpty($Employee.ManagerUserName)) {
              Set-ADUser -Identity $Employee.EmployeeUserName -Manager $null
    } else {
              Set-ADUser -Identity $Employee.EmployeeUserName -Manager $Employee.ManagerUserName
    <#similar code here for checking value of OfficePhone and Fax attributes and populating AD attributes depending on if attribute value in .csv file is empty or not#>

Hi BoxiKG,
If there is any other question regarding this issue, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

CSV file load

Hi,
I do have a .CSV file which is carrying some contact information like "name,address,phone". How do i load into Oracle CRM On demand? I know that could be done with the help of Import and export tools. And my question is how this file would be made compatible with the exixting contact layout in the application? Any help/
Regards
Jdeesh

Jdeesh,
There are a few ways to do this.
1. Navigate to the contact detail page and take a look at all your fields , required, display names etc
2. Export the contact records, cleanup the export file (keep the headers) and reimport this file
3. Run a report of this recordtype to obtain fields for that recordtype.
Jaya

Customized Table is giving Short Dump .Want to extract data in Production S

Hi ,
I have a problem in customized table .Table is giving a data after trying to access 185th record.There is some problem in the table.But I want to pull out all the data from the table..Is it possible to download it .Pls suggest..
Even If I put one select query also it is givning dump..
Pls suggest some other technique to download it..
Regards
Arun.P

Hi Arun,
Where there you are using WHERE condition in select statement while fetching the records?
if yes means check for the fields are primary key, available in WHERE condition, or else create secondary index for those
non Primary key Fields in WHERE condition.
This may help you.
Thanks and Regards,
Prakash.K

Csv file load related issue: giving short dump

Similar Messages

Maybe you are looking for