CTS and CMS

What is CTS n CMS?

Hi,
CTS
The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in customizing, and then transport the changes between the SAP Systems and clients in your system landscape.
This documentation provides you with an overview of how to manage changes with the CTS and essential information on setting up your system and client landscape and deciding on a transport strategy. Read and follow this documentation when planning your development project.
For practical information on working with the Change and Transport System, see Change and Transport Organizer and Transport Management System.
What ever is developed in sap is assiged to a transport request, it is created by transaction SE09 and then it is released when the data needs to be transported in various other systems.
The Change and Transport System (CTS, SAP NetWeaver usage type AS ABAP) is enhanced with SAP NetWeaver 7.0 SPS 12 to be capable of transporting Non-ABAP object types, such as from the SAP NetWeaver usage types PI (Exchange Infrastructure), EP (Portal), etc. The enhanced CTS I will refer to as CTS+. Using its new capabilities further simplifies system administration of an SAP system landscape.
CTS+ in a SAP NetWeaver Portal Landscape
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0249083-c0ab-2a10-78b8-b7a7854b1070
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
http://help.sap.com/saphelp_nw04/helpdata/en/ea/fab8c64eed11d192f60000e829fbc6/frameset.htm
CMS
Change Management Service (CMS) is an infrastructure based on Netweaver Developer Infrastructure and it is used to transport development objects (e.g. XI interfaces) between different systems in your lanscape.
CMS is running in SAP J2EE Engine
CMS provides central for administrative and QM tasks for all JAva development Systems.
Features
Track defination
Development configuration defination
Defien runtime systems and deployment paths
CMS is the central point of access for developers to get new development configurations
Read this to have more details on CMS and it's use with XI
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Change and Transport Lists for CMS Transports
How To…
Transport XI
Content Using
CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
CMS,
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality  using CMS
CTS
Change and Transport System
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
Refer the link for CTS+ step by step method of transport:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
http://help.sap.com/saphelp_nw04/helpdata/en/03/dcb6b6048711d3b42a00609419f767/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Regards,
Vinod.

Similar Messages

  • CTs vs CMS

    Hello folks
    Which is a better way to transport XI objects from QA to Prod?
    CTS or CMS considering all the aspects Hardware etc?
    Thanks

    Hi,
    Change management system (CMS)
    Change Management Service (CMS) is part of SAP NetWeaver Development Infrastructure (NWDI). This service enables you to configure your transport landscape and manage the transport of objects between different systems.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    Automated procedure for tranporting....
    1. Configure the CMs according to the envinorment and then no reason to login to server to copy the files.
    2. Easier
    3. Takes less time comapred to fielsystem
    4. Feasible for lansacpae having more interfacess
    5. COnfiguration has to be done setting various servers according to the server time spent in cofg may be more
    CMS --> Its runs on J2EE engine.
    Change Transport system (CTS)
    The CTS is the central tool for managing changes to Customizing and Repository data that you make in the IMG or ABAP Workbench. The CTS records all changes in change requests.
    http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm
    Difference between CMS & CTS:
    Change Management Service (CMS) is part of SAP NetWeaver Development Infrastructure (NWDI). This service
    enables you to configure your transport landscape and manage the transport of objects between different
    systems.
    It runs on JAVA Engine.CMS is generally used to transport Javadevelopment objects. The XI Integration
    Server uses CMS to transport Integration Servercontent.
    Change Transport system (CTS)
    The CTS is the central tool for managing changes to Customizing and Repository data that you make in the
    ABAP Workbench. The CTS records all changes in change requests.
    CTS is the Product Completion Level.Shows the production process phase that has been reached by the
    product.
    SAP recommends the CMS, because that is the part of SAP NetWeaver Development Infrastructure, so obviously it is better and gives high performance according to my knowledge.

  • CTS+ and portal

    Hi all,
    I have implemented a CTS+ to make transport on my EP 7.0SP12
    now, a little question:
    I activated the project in my SOL MAN because I want all my CR are located in the projects. so, I have a little problem:
    I would like assign my CR created by the portal in the project without logon in the sol man but completely by portal.
    in other words, in sol man I configured the project as mandatory but if, by portal I create a CR, this CR can be created out the project! I have only a warning but the cr is created but, then, it's impossible modify it (by portal).
    have you some ideas? I don't think it's a problem of permission on the portal because I have superadmin permission!
    help me if you can,
    regards
    ludovico

    Hi Barbara
    I'm in the position as you - trying to figure out what to use... As I understand it CTS+ can transport abap and java. This was earlier covered by CTS (abap) and CMS (java). So now we can control transports and synchronization from one tool instead of two tools.
    Best regards, Dorte H Larsen

  • How to configure DTR,CBS and CMS?

    hi all,
           I am working with SneakPreview (EP7.0).Is it possbile to configure DTR,CBS and CMS on sneskpreview ? Can any one tell me the procedure to configure ?
    Thanks&Regards
    Suresh

    Hi,
    pl go through this article
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f37d7e6a-0b01-0010-6690-8f4403b810cf
    Regards
    Ayyapparaj

  • DMS and CMS

    Hi,
    we have some documents sotored in DMS(Document Management service) now they need to be moved to
    CMS(Content Mangement Service) I
    Really I dont know what is DMS and CMS.I  have searched in the forum but the information is not sufficient for me so please Can any one help me how can iI move files form DMS to CMS .
    Thanks,
    Shaik .

    Any help please?

  • Can anybody explain briefly about CTS and SLS ?

    hi gurus all ,
    could u pls. get me some idea about CTS and SLS ?
    where it will be useful?
    How do we generate reports in SD?
    and what is the process of report generation?
    How can we do the partial deliveries and give some steps to configure in sap?
    If the client logon screen deleted, requirement is urgent, then what will we do?
    hope will get me the above information in detail:
    thanks to all gurus
    vasan

    Hi,
    Reports are basically what the client uses to run his business to understand what is happening. In sap all the data is stored in the form of tables. So when we want a report say to show the sales happd over the last 3 montsh or an year over some divison for a product can be fetched from the database thorugh these tables.
    ex some standard reports
    SAP SD Reports: T-Code: SARP
    All Standard Reports which are avalable are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
    2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
    3. Sales organization -> Sales organization / Sales office / Sales employee
    4. Shipping point -> Deliveries / Returns
    5. SD documents -> Orders / Deliveries / Billing documents ...
    & so on.
    Some of the Standard reports in SD are:
    Sales summary - VC/2
    Display Customer Hirarchy - VDH2
    Disply Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbond deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant congiruration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Blocked orders - V.14
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22
    with regards
    Rajesh

  • Port Assignment SIA and CMS

    Hi,
    I need to change port assignment on SIA and CMS.
    How do I change ports on these services?
    Br,
    Sonni

    stop the sia and go into it's properties from the CCM. I believe they can both be set there as well as in the CMC > Servers > CMS
    Regards,
    Tim

  • Configuring NWDI and CMS

    Hi,
    We did a Development portal installation (DEV) with NMDI and finished the DI post installation in the DEV system and configured my SLD in solution manager. Now we are going to install Portal Quality system (QAD) with NWDI. I need some documents after installing QAD system, like DI post installation and CMS configuration from quality to development system. I mean to say that, DEV as a Domain controller and QAD to include in that CMS. Before doing the DI post installation in QAD, do I need to change the Domain data of change management in Quality like CMS name, CMS url, CMS user, password, trans dir, Domain ID(if so,Can we change this ID to DEV), DTR url, CBS url. If so, do I need to give the datau2019s of Development system? or how to configure my quality system CMS to development system CMS. I found some links but there is no link that says about the configuration in development.
    Thanks
    Regards,
    Ral

    Hi Narendra.
    Thanks for reply.
    While defining Software Component, I created a Build Time Dependency on these components and chosen SAP-JEE, SAP_BUILDT and SAP_JTECHS components.
    While defining a Track under Domain in CMS (Landscape Configuration) i am not getting these dependent components under my SC.
    So after adding SC to my track, i again Defined Dependencies on my SC. Now i can see these components under my SC but gives warning that "SC Dependencies are different but accepted by synchronization" and status of SC is yellow.
    Please suggest.
    Mandeep Virk

  • CTS+ and CHARM?

    Hello all,
    What is the difference between CTS+ and CHARM?? Is it better to use one over the other?
    TIA

    Prakhar,
    your link doesn't say CTS is the Admin execution and governance of change projects. That's the defintion of ChaRM.
    CTS is Change and Transport System, which is needed for ChaRM but can be used without ChaRM.
    CTS+ just adds the One-Transport-Order (OTO) part to CTS.
    you can read more about CTS here:
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
    CTS+ can be better understood here:
    FAQs on the Enhanced Change and Transport System [original link is broken]
    from the above CTS link:
    "CTS (Change and Transport System) is the transport capability of the SAP NetWeaver AS ABAP. This capability has been enhanced and now, the transport of non-ABAP objects is supported as well. The u2018+' or u2018enhanced' has been added to express this."
    Regards,
    Jason

  • I have Cadillac CTS and an iphone 4.  I'm suppose to my contacts from my phone displayed on the car

    I have a Cadillac CTS and an iphone 4.  The owners manual says that my phone contacts can be displayed on the car display

    Go to http://gm.com/bluetooth , click the Bluetooth link, then select your specific vehicle model, cell provider, and cell phone model.  The site will then tell you whether or not that option is available on your vehicle. 
    I have a 2012 Cadillac CTS Sedan with Navigation.  According to the site, the Phone Book Download feature is disabled on my car on the iPhone 4.   (Apparently it is disabled for my new iPhone 5, too.)     

  • Tomcat and CMS on Different Hosts

    Hi,
    We have to install Tomcat ( Server1) , CMS (Server2) and CMS DB (Server3)  on three different hosts on a clustered Environment.
    In our case, CMS Database is on Diff host. But, when i try to install Web Tier (Tomcat) on Server2, It is looking for CMS Host.
    And If want to install CMS without Web Tier (Tomcat), CMS wont start without Web Server..
    What should i install first and how can configure..it looks like both are needed and i want them in a Seperate Host ?
    Please throw some light on how this can be done in a clustered environment...Thanks.

    My assumption is that if we have an existing Tomcat server already installed ( not the one comes with BOE package ),
    we can install BOE on Server2 and stop tomcat later..But, this Webtier (Tomcat) on Server1 needs to be pointed to CMC which is already running on Server2
    Eventhough I have already instralled BOE without Web Tier on Server2, It wouldn't allow me install Web Tier (Tomcat) on Server1 which needs to have CMS Host pointed while installation..
    Without CMC in Server2 (I couldn't make sure CMS is running and working ) I tried with CMS Host name (Server2) for Web Tier (Tomcat) installation on Server1, But, It wouldn't start..
    So, I Installed complete BOE with WebTier on Server2 and then Installed Tomcat on Server1 which can be used for Server2 as webserver now..
    My Understanding is that server1 web tier should be installed standalone,Here it is not working because it is customised for BOE which needs to be pointed to CMS while installation..

  • Difference between CTS and Transport request

    Hi,
    i need to know what is the Difference between CTS and Transport request.
    kindly expecting replies

    CTS (Change & Transport System)
    The CTS is a tool that helps you to organize development projects in the ABAP workbench & in customizing and then transport the changes between the SAP Systems & clients in your system landscape.
    This docuentation provides you with an overviewof how to manage changes with the CTS & essential information on setting up your system & client lanscape & deciding on a transport strategy. Read & follow the documentation when planning ur development project.
    For practical information on working with the Change & Transport system, see Change & transport Organizer & Transport Management System.
    Transport Request
    Transport Request is a Request number where the developments are given logical storage number which in turn help in transporting the developments to one system / server to other server.
    T.Code SE09 & SE10 are used to Transport the request..
    Click the Display button.
    The list of Workbench ( Workbench request )Customizing ( Customizing request) are shown.
    Reward Points if useful.

  • CTS+ and NWCE 7.2

    Hi all,
    We have a configured CTS+ on Netweaver 7.0, we are using it for EP deploys. (transporting ivews and so on).
    Now we have installed CE 7.2 and would like to integrate it in the existing CTS+.
    After trying to configure we get the following error:
       Deployment
       Transport request   : CNDK919552
       System              : CEQ
       tp path             : tp
       Version and release: 372.04.71 700
       Deploy Service called with following parameters:
       CommunicationData-Type:0
       CommunicationData-Address:http://hfavwsapqce1:50008
       CommunicationData-Host:hfavwsapqce1
       CommunicationData-Port:50008
       CommunicationData-User:'filled'
       CommunicationData-Password:'filled'
       Deployable(0)
       Deployable-Type:0
       Deployable-Id:\\hfasapbcnr\sapmnt\trans\data/CNDK919552/test1.test1_20100708_052527.epa
       Caught com.sap.sdm.apiimpl.remote.client.APIAuthenticationException: The user 'ADMINISTRATOR' could
       >>>not be connected to the specified host 'hfavwsapqce1'and port '50008'.caused by:com.sap.engine.servi
       >>>ces.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial conte
       >>>xt. #
       Hint: 1) Check the causing exception for the details. 2) Ask for help in BC-JAS-COR.
       Reason: Exception while trying to get InitialContext.caused by:javax.naming.NamingException: Excepti
       >>>on while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.Destinatio
       >>>nException: Cannot establish connection with any of the available instances: #
       hfavwsapqce1:50008 Reason: com.sap.engine.services.rmi_p4.P4IOException: ]caused by:com.sap.engine.i
       >>>nterfaces.cross.DestinationException: Cannot establish connection with any of the available instance
       >>>s: #
       hfavwsapqce1:50008 Reason: com.sap.engine.services.rmi_p4.P4IOException: during deployment.
       com.sap.sdm.apiimpl.remote.client.APIAuthenticationException: The user 'ADMINISTRATOR' could not be
       >>>connected to the specified host 'hfavwsapqce1'andport '50008'.caused by:com.sap.engine.services.dc.
       >>>api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context. #
       >>>int: 1) Check the causing exception for the details. 2) Ask for help in BC-JAS-COR.
       >>>n while trying to get InitialContext.caused by:javax.naming.NamingException: Exception while trying
       >>>to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cann
       >>>ot establish connection with any of the availableinstances: #
       >>>gine.services.rmi_p4.P4IOException: ]caused by:com.sap.engine.interfaces.cross.DestinationException:
       >>>Cannot establish connection with any of the available instances: #
       >>>ap.engine.services.rmi_p4.P4IOException:
       Returncode:'12'
       Deployment
       End date and time : 20100711120338
       Ended with return code:  ===> 12 <===
    is this scenario even possible ? (CTS+ on NW7.0 with CE 7.2)
    any ideas ?
    Dimitry Haritonov

    anyone ?

  • Best Practise for multiple SLDs and CMS

    Hi Guys,
          We are planning on our XI Landscape, can you guide me to best practices document or weblogs on where it answers my following points.
    We are planning to have DEV - QA - PROD XI Boxes. We are planning to implement CMS. What is the optimal approach, pros and cons of each approach.
    1) Installing one central SLD which would be either on DEV or QA box. CMS also installed on the same box.
    2) Installing two SLDs
        i) one on Dev Box. CMS on Dev Box sharing SLD
        ii) second SLD on QA box which is shared by PROD box which will be the SLD used for production.
    <i><b>I would be happy to see responses with any existing landscapes which are being implemented by you guys in case of CMS also in picture.</b></i>
    Thanks in Advance
    Regards
    Sujan

    Hi,
    In my project we have maitained 2 SLD one for Production landscape and one for non-Production landscape. However the High Availability scenario is available in 7.1 but it is not there in release 7.0.
    In case of release 7.0 you have to follow the following procedure to have the similar (HA) kind of scenario:
    1). In case of ABAP and dual stack go to SLDAPICUST and maitain two entries for SLD with proper host name, port number and PIAAPLUSER detail.
    Make one entry as Primary.
    Also if JAVA stack is also there then go to Admin tool and maintain the detail in "HTTP Setting" of the "SLD Data Service" with the data of the primary SLD just maintained above through SLDAPICUST.
    2). In case of only JAVA stack maitain the detail in "HTTP Setting" of the "SLD Data Service" with the data of the primary SLD.
    Note--Here there is no option to maintain two SLD server details.
    3). Now Login to ABAP/+JAVA stack server at the SAP GUI level and check the connection by executing SLDCHECK command. If it works fine then do the following:
         a). Now to make your two SLD in sync login to SLD with Admin user having write access to LCR (e.g. PISUPER, j2ee_admin in case of ABAP+JAVA or "administrator" user in case of JAVA stack) and go to Administration->Data Suppliers->Add SLD.
    Here you have to add the other SLD detail in the form of "http://<servername>:<j2eeport>/, with SLDDSUSER ID detail. This will make both the SLD in sync to each other.
    Note--Make sure that the password for all the user mentioned above is same in both the SLD otherwise it would cause an error.
       b). Also take the full export of your primary SLD by going through "Administartion->Export" and Import it in your secondary SLD. This will make both the SLD in sync with each other initialy and you won't get any error when both SLD tried to sync automaticaly.
    4). In the case when one SLD is down then make the other SLD primary through the transaction "SLDAPICUST", RZ70 and by logging through Admin tool. Check your setting through the transaction SLDCHECK.
    Note--In RZ70 you have only one option and you can maitain only one SLD detail at a time. So whenever there is a problem in one SLD make sure that you have make the changes in RZ70 as well with the new detail of the SLD.
    Best regards,
    sheo

  • Crystal Reports - WCS (Web Component Server) and CMS login confusion

    Hi,
    I reinstalled the WCS after trying to restart the various servers/services for Crystal and having the Event ID 34400:
    -Original Problem-
    The description for Event ID ( 34400 ) in Source ( Crystal_WebConnector ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: assert failure in file (Y:\backend\WebAppServer\wsconnector\src\isapi\workerpool.cpp) at line 94.  (false : Request failed with code 3 and error message Communication failed with all configured Web Component Servers because they are disabled or not currently running. If this problem continues, please contact the system administrator.)..
    -Current Problem (after uninstalling and reinstalling WCS - yuck)-
    Anyway, now I'm unable to log back into the CMS through the WCS  (See screenshot:   <a href="http://www.picsaway.com/view/crystalproblm-95f6e20632.jpg">http://www.picsaway.com/thumbs/crystalproblm-95f6e20632.jpg</a>  )
    Is it definitely the same username and password on the right box as used in the left box?  I don't know what the password is (and have asked a colleague but received no response yet).  The CMS is running on the same computer as the WCS so I was hoping not to have to authenicate via WindowsNT/Enterprise/LDAP (the 3 options).
    So.. I'm sorry for the ramble but I've made a problem worse trying to fix it and am not sure where to go from here.
    Thanks,
    Hew
    Edited by: staid03 on Jul 16, 2009 4:59 AM

    Hi,
    We're going to reinstall CR onto a different computer.  Please close this thread.
    Thanks.

Maybe you are looking for