CUA issue; after roles are removed systems assigned to users remain?

Hello,
I've had this specific issue with CUA for some time, but haven't needed to try and resolve until now.
The problem is this:
- after security roles for a user have been removed for an entire system, in the system tab entries remain.
- this results in the user account remaining in the child system, even though there are no security roles assigned.
I have tried removing system entries once all roles are removed, however after saving the changes I see that the systems still exist.
So, can anyone comment on why this happens? Is there an SAP note to resolve this?
Appreciate the feedback.
Paul

Paul Vipond wrote:
Thanks Julius.
My intention is not to delete users. What I'm expecting to happen is that after I remove all the roles assigned to user for a specific child system, that user should not exist in the child system anymore.
If you delete the system assignment for a child system, A deletion of the user in that system will happen.
Paul Vipond wrote:
This is the way it has worked for many child systems, but not all. For me it's specifically my production systems where a user account remains after all the roles have been removed.
In dev/test systems I've removed all roles assigned to a user and after saving their account no longer exists in those dev/test systems.
Make sense?
If that is so, that is a bug in your dev/test system. I suggest to open an incident wiht SAP then.
It should work like in a standalone system.... Removing all roles there will never lead to a deletion of that user!
b.rgds, Bernhard

Similar Messages

Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN

Dear All,
I am new to sap...
I tried installing SAP NETWEAVER 7.X SR3
While installing i got a error at phase 33 0f 50.
The error message is CJS-30196 Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN.
I am here copying the error log below..
Can some one guide me how to solve this.
I am using Oracle DB and Java j2sdkfb-1_4_2_24-rev-b06-windows-amd64.
Mine is a AMD processor.
Line:-----
Line:-----
SAPINST log file
Line:-----
Line:-----
INFO 2011-12-28 14:26:35.453
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\x.
INFO 2011-12-28 14:26:35.453
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\x.
INFO 2011-12-28 14:26:40.750
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2011-12-28 14:26:40.750
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2011-12-28 14:26:43.031
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.99.xml'.
INFO 2011-12-28 14:26:45.625
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.100.xml'.
WARNING 2011-12-28 14:26:57.656
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2011-12-28 14:27:02.875
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.34.xml'.
INFO 2011-12-28 14:27:03.156
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2011-12-28 14:27:14.531
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.34.xml'.
INFO 2011-12-28 14:27:15.125
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.101.xml'.
INFO 2011-12-28 14:27:15.500
Execute step createJ2EEAdmin of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0
INFO[E] 2011-12-28 14:27:16.281
FSL-02077 File system export (share) saploc does not exist.
INFO 2011-12-28 14:27:16.656
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\UserCheck.message.
INFO 2011-12-28 14:27:16.687
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\UserCheck.jlaunch.
INFO 2011-12-28 14:27:16.687
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\UserCheck.jlaunch.
INFO 2011-12-28 14:27:16.718
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\UserCheck.log.
INFO 2011-12-28 14:27:16.828
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS.
INFO 2011-12-28 14:27:16.828
Output of F:\usr\sap\D04\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install" -c sysnr=00 -c ashost=VIJAYA04 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
WARNING 2011-12-28 14:27:47.625
Execution of the command "F:\usr\sap\D04\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\install" -c sysnr=00 -c ashost=VIJAYA04 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 3. Output:
Dec 28, 2011 2:27:26 PM Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 28, 2011 2:27:31 PM Info: Connected to backend system D04 client 001 as user DDIC
Dec 28, 2011 2:27:42 PM Info: Called for user J2EE_ADMIN
Dec 28, 2011 2:27:44 PM Info: User J2EE_ADMIN exists
Dec 28, 2011 2:27:46 PM Info: User can log on with the given password
Dec 28, 2011 2:27:47 PM Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$MissingRoleException: Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN
     at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:940)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:268)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
SAPINST Log:-
Dec 28, 2011 2:27:47 PM Info: Leaving with return code 3
INFO 2011-12-28 14:27:47.625
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\dev_UserCheck.
ERROR 2011-12-28 14:27:47.640
CJS-30196 Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN
ERROR 2011-12-28 14:27:47.734
FCO-00011 The step createJ2EEAdmin with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJ2EEAdmin was executed with status ERROR ( Last error reported by the step :Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN).
Line:-----
Line:-----
USER CHECK LOG
Dec 28, 2011 2:27:26 PM Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 28, 2011 2:27:31 PM Info: Connected to backend system D04 client 001 as user DDIC
Dec 28, 2011 2:27:42 PM Info: Called for user J2EE_ADMIN
Dec 28, 2011 2:27:44 PM Info: User J2EE_ADMIN exists
Dec 28, 2011 2:27:46 PM Info: User can log on with the given password
Dec 28, 2011 2:27:47 PM Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$MissingRoleException: Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN
     at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:940)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:268)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Dec 28, 2011 2:27:47 PM Info: Leaving with return code 3
Thanks & Regards,
Vijay...

Dear All,
As the installation is not completed i could not login SAP.
I tried to create user at OS level and assign SAP_J2EE_ADMIN.
Doing so i am getting an popup saying an object SAP_J2EE_ADMIN cannot be created.
I am still in the installation phase.
Below is the User Check Log..
Dec 28, 2011 2:27:26 PM Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 28, 2011 2:27:31 PM Info: Connected to backend system D04 client 001 as user DDIC
Dec 28, 2011 2:27:42 PM Info: Called for user J2EE_ADMIN
Dec 28, 2011 2:27:44 PM Info: User J2EE_ADMIN exists
Dec 28, 2011 2:27:46 PM Info: User can log on with the given password
Dec 28, 2011 2:27:47 PM Error: Exception during execution of the operation
[EXCEPTION]
com.sap.security.tools.UserCheck$MissingRoleException: Role SAP_J2EE_ADMIN is not assigned to user J2EE_ADMIN
     at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:940)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:268)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Dec 28, 2011 2:27:47 PM Info: Leaving with return code 3
Thanks & Regards,
Vijay..

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

Workflow issue after transport to QA system

Greetings,
After transport to QA my workflow does not execute the job I've assigned to my step.
I have a program assigned as a background job in a step that gets triggered by a typical workflow event.
I believe this is the first workflow for their system... and it's definately my first as well.
I can see the workflow executing using the trace.... but my job never runs.
I'm beginning to suspect I need to refresh the workflow buffer... but perhaps it's an authorization issue
Please advise...
Doug -

Doug:
First refresh the memory of the workflow to take the new changes ok, transaction SWU_OBUF.
Just to be sure, check the transaction SWU3 and check if everything is OK.
The posible authorization problem is for the User WF-BATCH, so check the authorizations for this user.
Best Regards,
Jessica

Loads Issue after Upgrade in Production system

Hi Guys,
Yesterday we did 4.6c to Ecc6.0 upgrade,
After As a BW Team member i activate my BW Source system and Replicate the whole D/S, i Activate all the Transfer rules using RS_TRANSTRU_ACTIVATE_ALL. Then i started Loads through Process Chains but Previously loads are taken 20-40 min max right now it's takeing 3-5hours,
when i verify the detail steps in monitor step still Extractor level only, When i go to the RSA3 in Ecc 6.0 I can see the Data. but here i hav't see the data after 3 hours.
please suggest me wht r the steps i have to do after upgrade...
Thank you,
DST

Hi,
You might want to check your SMQS settings... also monitor closely transaction SM58 in the source system.... I encountered the same thing during upgrade and had to schedule a job every 10mins or so to trigger the push of the IDocs.
Hope this helps.
Cheers,
Gimmo

OS X Server 3.0.1 and OS X Mavericks: Managed Preferences not Removing on Mac After They are Removed from Server

I just upgraded my server to OS X Server 3.0.1 and am testing changing some managed preferences on my MacBook Air with OS X Mavericks. Initially from the upgrade the security & privacy and users & groups is disabled. I changed the settings in profile manager, and the push was successful. I then restarted my macbook air, and after logging in, it stalls and says "Updating Managed Preferences..." it stalls for about one minute and then logs in. Those preferences that I allowed in Profile Manager are still grayed out as if the preferences are not updating. Has anyone see this or have any idea how to troubleshoot?
Thank you.
Mikel

Brandon Macinnis wrote:
Dnar,
Thanks for the follow up bit about using the smbutil statshares command. I used that and could confirm that I am also able to force it to connect with smb2. Oddly though, in the stat share info it still says "AUTO_NEGOTIATE"
SMB_NEGOTIATE AUTO_NEGOTIATE
SMB_VERSION SMB_2.1
But maybe that just means something else and not the fact that it did not auto negotiate to SMB. I guess for now this will be what I have to do to use smb2.
I think in this case the AUTO_NEGOTIATE merely means it will auto negotiate a connection between SMB1, SMB2, and (from your data) also SMB2.1 this would have nothing to do with auto negotiating between SMB2 and AFP, which from this thread appears broken.
I also would like to thank Brandon for the tip about smbutil statshares, I had been looking for a simple way to tell what version of SMB was being used to test my NAS.
For everyone's benefit, it would appear from the above that whilst Apple advertise Mavericks as using SMB2 they have gone as far as implementing SMB2.1 and merely list it only as SMB2 for simplicity and due to the fact there is not a huge different between SMB2 and SMB2.1
See http://en.wikipedia.org/wiki/Server_Message_Block#SMB_2_and_3

Macbook doesn't restore memory to flash memory after files are removed

For every flash memory device i use (flash drive, mp3 player, etc.), when i remove files from them to the trash, the memory is still being used on the device. For example, when i tried to take a song off my mp3 player, it allowed it but the remaining memory was the same as before. i experimented by moving every song out of the device so it was empty but the memory was still being used. Does anyone know how to fix this because i am at the point that i can no longer used devices because it claims to be full.

This happens to me too. I use the program Show Hidden Files
http://www.apple.com/downloads/macosx/systemdiskutilities/showhiddenfiles.html
The songs or whatever you are deleting is going into the .trashes folder on the drive or mp3 player. Just delete the .trashes folder. It will make a new one every time you delete something though. I hope this helps.

Trackpad input AFTER fingers are removed (static?)

My problem is NOT a trackpad that does not respond for a few seconds.
My problem IS that very often the pointer on the screen moves away from where I just placed it with the trackpad, usually in the opposite direction and all the way across the screen. This movement can range from subtle to completely eratic. Most of the time the trackpad is useless due to this movement.
I suspect it may be a static issue but i have no real solutions to this. Resetting the trackpad (palm method) seems to have very little effect. The iScroll2 software I use has no effect installed or uninstalled.
Any Ideas?
Thanks
Powerbook G4 FW 800 Mac OS X (10.4.6)

For some people, I'm saying this is particularly you though, the way in which they have their hand(s) casues the point to behave irraticly. Often it's a case of having another part of their hand touching the trackpad while they try to move the pointer with their finger. Another cause is the other hand touching the trackpad. This is far rarer though does hapen.
It's a matter of style and you might want to confirm that it's not a problem with yours.
Personally I don't like using trackpad because I tend to use my index finger slightly rotated so I use it at about 45º which causes irritation.

How to know what are t code assigned to user with out execution

how to disable the authorisations to perticular t cde

Hi Ramesh
If you want no user wants to use a particuler T code, you can lock the tcode using SM01 (Lock transactions).If you want to know the T codes assigned to a user go to T code SUIM - > Roles---> BY user assignment -
> feed your user name & execute (F8). In the next menu on application tool bar you will find Transaction assignment tab click the tab that's it you will find list of t codes you are allowed to use in the client.For this you can also use S_BCE_68001419 directly insted.
Regrds...
S.Manu

After installing new operating system software, my user account name has been changed and i don't know the password.

i need help!
I just installed Mac OS Maverick in my laptop, but when i checked the Users&Groups There are only 2 User name 1 is "Apple(admin) and 2 is Guest, my user account name has been changed even the password. how can i retrieve my old user account name and password or how can i changed it?

Here's an updated set of instructions you can try:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

I have created a role in child system .

i have created a role in child system and i want to create a composite role in cua with this role in child system but
when i am entering its name in pfcg it saying the role not present please help.

Hi Suvodeep,
Please do not confuse this with CUA.
If you have created a new role in the child system, and want to see it in the CUA, goto PFCG-> Environment -> "text compare for CUA system"
You can try the other option too to see what it does
Hope this helps
Abhishek

**** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-

read below
Message was edited by: Paulman!

Have been experiencing intermittent keyboard, trackpad and usb mouse function issues after installing the latest system and itunes updates, which was yesterday or day before.
(Lost even some work because the only way to get things moving was to restart.)
Tried solution (verify and repair disc permissions) that coconutmunk recommends under similar topic from 2007:
http://discussions.apple.com/thread.jspa?threadID=1190210
That solution fixed worst part of the problem: getting all 3 parts irresponsive.
It seems as problem is still not entirely solved as computer has once tried to lock all 3 again, however before I had chance to get concerned it locked up all 3 again by itself.
Yet, usb mouse keeps on getting disconnected every now and then randomly, even after 2 runs with disc permission solution.
Conclusion from 2007topics where people had issues with keyboards and/or mouse devices, was that it was Leopard system having those problems, nothing like that was reported in about Tiger system, as it seems.
Now, those problems were fixed back then with an update, but seems this new update has brought back old issues!
Frankly, I really do not have time with computer issues, on top of Maya being characteristically moody already every now and then, as I have to be done with a pretty big project only within few days!
Please PLEASE, Apple crew, fix this issue asap!
I really need those things working properly quick!
Thanks in advance!

SAP_J2EE_ADMIN, no systems available for user mapping

Hello,
We are using EP 7.0 to run CRM applications (client 100).
We are creating portal users in 001 client of CRM server.
When I try to map users of portal to users of crm through user administration, it says that, "There are no systems available for user mapping for the selected principal".
I discovered that this warning disappears if I give the user has SAP_J2EE_ADMIN role in 001 client. But this time the user has the content adminstrator, user administrator and system administrator tabs as well. I don't want to give administrator rights to everyone.
What can I do?
Any recommendations?

I maintained the permissions like Administrator:None, End User:X, Role Assigner:X.
I removed the J2EE_ADMIN role from the user.
But unfortunately the result did not change. The user can not access the CRM system.
Here is the error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.crm_user/com.sap.pct.crm.ckm.home/com.sap.pct.crm.ckm.work/com.sap.pct.crm.act.activities
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/j2eeadmin/systems/com.arr.SAP_CRM'. User: 'ILKNURY', Reason: Access denied (Object(s): portal_content/j2eeadmin/systems/com.arr.SAP_CRM).
Exception id: 04:32_24/04/07_0038_5660850
See the details for the exception ID in the log file

CUA issue; after roles are removed systems assigned to users remain?

Similar Messages

Maybe you are looking for