CUCCX 7.0 Set Enterprise call Info

I am trying to use SET Enterprise Call info so when the call rolls back to another queu it shows the the info from the first queue. So example caller goes into the nurse queue and after 6 minutes rolls to the FRONT DESK queue. I want to use the "Set Enterprise call info" to show info from the nurse queue so they know when a call goes to their agent from the Nurse queue. I have it added but not sure what variables to make and then to set in it so it will do this.
I have it under the "Menu" "MON_Fri"  option 5 Phone nurse. I have attached the script.
Any ideas?
Thanks
Dave

Hi
If agents are using CAD, there is a call info window (lower right, if I recall correctly) which lists the CTI RP, queues, and any previous agents that this contact has been through... this works without any particular scripting, it's just a matter of getting your agents to look at it...
Aaron
Please rate helpful posts...

Similar Messages

  • Setting Enterprise Call Info Step Within An HTTP Triggered CRS Script

    IPCC Enterprise 7.5(6)
    CAD 7.5(6)
    IPIVR 7.0(1)sr05_build504
    We had a vendor develop some IVR & ICM scripts a few years back to take a website triggered request and pass along it’s value from the header, store it into Call Peripheral Variable 1 and place a call to a queue with agents (using CAD).  It then sets off a work flow group macro to populate this value (from PV1) into another application along with a repeating message to the agent that says they have a new request.  Since we recently upgraded our IVR to 7.0(1)sr05, I had to change the scripting some to make it work.  They were using a freaky way of getting the value into PV1 using a pre-connect application triggered from the initial application.  Anyway, their method would not work with the new version any longer so I needed to alter the scripts some.
    The problem I’m having is that PV1 is being set after the Place Call step.  This actually needs to be set before it reaches an agent in order to pass the value into CAD.  Currently, I’ve been using some delay statements in the ICM script to give it time to get the value into PV1 but it’s not 100%.  I get sporadic results.
    Current script in test.
    I’m looking to see if anyone can tell me a way to setup the Set Enterprise Call Info step before the Place Call step?  Since this is HTTP triggered, I can’t use (Triggering Contact) and I haven’t been able to set a pseudo contact because debug tells me that the contact is null or because it’s not a call contact.

    Hi Gabriel.  Thanks for the reply.
    The current method that's in place seems to work fine for me in test but when in production, I'm getting about a 60-70% success rate.  As it comes into my ICM queuing script, I'm using another Run Ext Script node to execute a delay to give the Set Enterprise Call Info step from the first VRU script extra time to set it's value before reaching the ICM Queue To Skill Group node.  I definitely notice better results when I did this but still not a 100%.
    The reason I'm doing this is because of the notation that the help file discusses about the Set Enterprise Call Info step:
    "Note    In a Cisco Unified CCX system:
    Beginning with CRS 4.0, this step should be placed script before the call gets connected to an agent. This means the step in the script should be placed before the Select Resource Step or in the Selected/Queued branch of the Select Resource step.
    If call data is set after the call gets connected to the agent, it will not be displayed in Cisco Agent Desktop (CAD)."
    So this is why I've been looking to see if this step can somehow be set before the Place Call step.  I'm not that familiar with altering Sessions or Contacts but was hoping someone might know how to manipulate these in order to let me do this.
    Thanks again.

  • How to use "Set Enterprise Call Info" step in the script ?

    Hi all
    Can anyone please suggest how to use "Set Enterprise Call Info" step in the script.
    Does anyone has any example script with the same (a complete example script) ?

    Hi
    go to this guide
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/uccx70edgs.pdf
    and see the chapter
    "Designing Scripts for use with the Cisco Application Gateway"

  • UCCX 7.0 - Set Enterprise Call Info not working

    I had inherited a set up of IPCC 3.5.2 which was passing reference numbers to the agent desktop program which the users had typed into a collect digit prompt section and stored in a variable (in this case v_referenceNumber).  I want to take that information and pass it on into the CAD (Cisco Agent Desktop).  We are using UCCX 7.0.1(SR5).
    The script we were using previously was upgraded upon opening it in the editor as expected but instead of a simple set enterprise data section like was in the script previously I now have an "IF" statement for each one of those sections of the script where the set enterprise call info is.  I have been looking through the three scripting guides and found the Enterprise Expanded Call Context (ECC) section where I think I need to be but I am not sure what I am doing wrong.  Personally I would like to Scrap the IF statements entirely and just move the Set Enterprise Call Info steps up under the Selected tree and delete the IF statements entirely, which is what I am playing with now.
    Anybody know what I might be doing wrong?  For example, I am not sure in the set enterprise call info section under Expanded Call Variables, when I click on add or modify an existing, my value is v_referenceNumber and the name is user.reference I had defined previously, BUT, under Array Index and Token, do I need to specify anything?  Specifically with Token, am I supposed to put in the Field index number for the variable as defined in the Side A section of the Desktop Administrator Field List?  Why they would move this from a simple application to the web tool they have is boggling, it seems to lock me out when I am the only one logged in if I am not careful.  Pet peeve though.
    Anyway, any guidance is appreciated, 3.5 was simple to put it mildly, and things just worked.

    But each one of the Enterprise Call Info steps is named user.layout, or you just need the user.layout once and the value would tie to the UCCX backend value of default or whatever your layout list was called?  So, to recap:
    1) Don't use the default layout due to potential upgrade changes down the road from Cisco.
    2) If you are just using UCCX like I am, I can skip creating Enterprise variables in the editor's settings menu.
    3) On the Set Enterprise Call Info > Expanded Call Variables Section, the names column is case sensitive and should be contained in quotes, and the value will be my variable I am transferring.
    4) I can set multiple variables in one step right?  This would be more efficient than multiple set steps or are there other factors in using one vs 4?
    @Jonathan:  You mentioned in your article that the Values column should be quoted as well but if I hit my dropdown and choose v_CallType (one of my variables obviously), its not quoted.  Will this cause the script to fail?  Should I go back and quote it?
    Sorry to beat this topic but I have a limited testing period each day and if I don't get it close or right on the money it will be forced to wait more to get another shot at it.  I guess that brings up the need for a testing queue then...  Next time around.

  • Enterprise call info/CSQ Name appear as clid on Cti port number

    Hi I was wondering if anybody knew how to make custom text appear on the agents phone when it is ringing rather than just the Cti port number. I have the enterprise call info working and have it showing on the cad software but would like it to appear on their phone when ringing. I would settle for the csq name but would rather my enterprise call info.
    Thanks
    Carl

    The only way to do it is to create separate Call Control Group (i.e. CTI Ports) per-application/trigger and set the Alerting/Display name on them. This forces you to define a set quantity of ports per-application instead of having one big pool available to the whole system though. It also means you need to have roughly a 1:1 correlation between CSQs and applications/triggers.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Version 9 Set Enterprise data

    Cant seem to get my layout to display in the CAD? 
    Setup Fields in DesktopAdmin Server side
    Moved Variables to MyLayout
    Set Layout in the Expanded Call Variables tab of set enterprise data.
    "MyLayout"=user.layout
    Nothing, Duh...

    Here is what I have learned on this subject:
    These components work together
    SetEnterprise Data Step
    Expanded Call Variables
    Desktop Administrator Service Side
    (1) Go to the Desktop Administrator - Create your fields names
    (2) While in Desktop Administrator - Create your Layout Name and add the Fields you want displayed to that layout.
    (3) Using the Script Editor, go under Settings and select "Expanded Call Variables" and add the names you created at the Desktop Administrator in Step 1
    (4) Set Enterprise Data using the "Expanded Call Variables" Tab set Values = to your Parameters, and Names set to your Names as defined in the Desktop Administrator and in the Expanded Call Variables under Settings in the Script Editor.  "yourlayoutname" should be set to user.layout
    The General Tab of the Set Enterprise Data step enables you to set Call Variable 1 - 9 which you should use if you watn the parameter to be a an item that you can generate reports on.
    Speilling counts and Case is sensitive!  
    Peter Buswell (aka DrVoIP)
    http://blog.drvoip.com

  • Option to set 'all calls' on by default

    I've been told there's an option in CUCM 9.1.2 to set 'all calls' on by default, as opposed to the user having to activate it themselves.  I'm trying to find where to enable it at, but I'm not seeing it.  Has anyone come across this or am I losing my mind?
    thanks all
    SJ           

    I realize it's an old post, but i wanted to put this out there to hopefully help someone else...we've discovered a bit of a bug with forcing all calls on for all the phones via Show All Calls on Primary Line and Revert to All Calls.  The problem here is that if privacy is off, the secretary can barge in on the user's line even if barge itself is disabled via feature control policy.  If we turn privacy on, then the list of calls for each attorney disappears, so the feature is worthless and the secretary is angry.  If we use the function as a line appearance, though, with privacy on, it works as intended, showing a list of calls for all the people the secretary is responsible for.  We're working with TAC, as this behavior doesn't make any sense...
    Once we get a fix, I'll post a follow-up.

  • Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).

    Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
    == URL of affected sites ==
    http://

    HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.

  • How to set the caller tune on PRI-Line/CUCM 8.X

    Hi Team,
    If passible to set the caller tune songs or advertising in CUCM 8.x -( in place of ringing).
    How to set the caller tune for incoming calls( advertising), including 4 digit extension. This feature is available or not (cucm 8.0.3) Kindly verify and confirm
    regards,
    Johnson

    Dear Team,
    Now i have configured the Call Queuing, Its working fine, But how to verify to incoming calls or Missed call  are in queuing, how to showing. 
    Connected call are showing, but unable show missed call like who ever in queue.
    Regards,
    Johnson.

  • HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    Do Not Disturb and Notifications
    Push notifications appear in Notification Center and alert you to new information, even when the
    associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
    a numbered badge on the app icon on the Home screen.
    Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
    iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
    following options in Settings > Notifications > Do Not Disturb:
    • Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
    want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
    • Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
    to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
    from your Favorites list or other Contacts groups you define. For information about Favorites,
    see Chapter 25, Contacts, on page 100.
    • Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
    their Caller ID) calls you twice within three minutes, iPhone will ring.
    Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
    turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

  • Get transferred call info to go to step

    In this scenearo I am getting a call from a particular extension in the system or from another script based on caller selection.  I want to get that call info and with an if statement make it go to a step in the script.  Basically we have 2 similar queue's and if a caller gets to one they will hear a menu option, if they choose option 2 it will transfer them to another queue where they will hear the same option.  I want to be able to read the call transfer info and make it skip the menu prompt step so that the caller won't be presented with the same menu prompt he/she just heard.  I have placed Get Call Contact Info in the script using Last Redirected Number but am not sure how to say "If Last Redirected Number = 1234 then GoTo a step below".  I've already created a variable with the extension Last Redirected number.  Just stuck on the if statement or maybe I am doing this entirely wrong.  Any help would be appreciated. 

    Store the last redirected number as a string variable in the script and then in your if statement check that string's value.
    HTH,
    Chris

  • SPA942 randomly getting set on Calls Forwarded

    I have 8 SPA942 and 2 SPA504G Linksys/Cisco IP phones on a freePBX phone system and they randomly get set to Calls Forwarded and the phones randomly get locked where it asks for a password to access call log etc.  I reset the phones to default reset all settings and the phones work, but still these issues come up, with or without a password being set on the phones, using firmware 6.1.5a on the SPA942 phones.
    I have setup the phone system a second time from scratch and still this issue comes up.  I cannot find any reason why the phones would randomly get set to calls forwarded, nor can I find any evidence that someone is logging into the phones and setting or changing the password.  
    Don't know where to go from here?
    Sincerely,
    Matt Wyckoff

    Turn on syslog & debug and catch all the messages sent from the phone (or all phones). It will help you with the further analysis.

  • Caller Info JTAPI Providor

    Dears,
    this message appear when i tray to request the caller info , i am use Tomcat server .
    Creating the CallerInfoServer ...
    Initializing Jtapi
    Opening JTAPI provider connection to 172.16.0.40...
    Creating the CallerInfoServer ...
    Initializing Jtapi
    Opening JTAPI provider connection to 172.16.0.40...
    Creating the CallerInfoServer ...
    Initializing Jtapi
    Opening JTAPI provider connection to 172.16.0.40...
    Creating the CallerInfoServer ...
    Initializing Jtapi
    Opening JTAPI provider connection to 172.16.0.40...
    com.cisco.jtapi.PlatformExceptionImpl: Unable to create provider -- null

    Unless someone else knows of a recent resolution, I know this has been a complaint of some and I've not heard of a solution at this point. If anyone knows differently, please post your reply.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How do you set up call forwarding?

    i am using 2 phone numbers and would like the calls for both numbers to go to which ever phone can be reached. how do i set up call forwarding?

    I take it you have two phones, each with a different provider?
    How do I activate Call Forwarding?
    To activate Call Forwarding:
    Press *72.
    Enter the phone number where you want calls to be forwarded. (e.g. *72-908-123-4567).
    Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
    Press END.
    How do I deactivate Call Forwarding?
    To deactivate Call Forwarding:
    Press *73.
    Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
    Press END.

  • Did a restore from icloud. lost all old texts, voicemails and recent calls info. How do I get them back?

    Did a restore from icloud. lost all old voicemails, texts and recent calls info. How do I retrieve?

    Did you backup the old iphone on your computer before taking it in for service?
    Did you restore the new iphone form the backup of the old iphone?

Maybe you are looking for