CUP 5.3 SP8 - Requests with several roles that have different approvers

Hello,
Here is a simplified version of a scenario we are testing in CUP:
A Request to add 2 roles to a user is created.
Role 1 has Role Approver1 only
Role 2 has Role Approver 2 only
When Role Approver1 logs into CUP to approve Role 1, he still sees Role 2 listed in the screen, even though he does not have authority to approve it. Same thing happens for for Role Approver2. My issue is - I thought CUP would only show the role that that Role Approver needed to approve. I didn't think it would should all roles that require approval.
I feel I have the stage configured correctly. Role Approvers can only approve at the Role Level; When Role Approver1 approves his Role, everything works great and CUP returns a message saying something along the lines of "Role Approved; Request pending approval from other approvers." - just like we want it to.
Again, my concern is that when an Approver sees the screen that shows the role they need to review, it also shows all other roles that need to be reviewed. This may become confusing to role approvers; they might think they are approving all roles when really they are only approving the one in which they are the approver.
Any info or ideas on how I could solve my issue? Let me know if I need to clarify further.
Thanks!
Jes Behrens

Thank you for your input Sudip.
However, I'm not clarifying my issue well enough.
I fully realize the workflow process we have setup. My issue is with the screens themselves, the screens that Role Approvers see when they login to CUP to approve a role. For example, tf a Request has 5 Roles in it with 5 different Role Approvers (1 Role Approver per Role), when they login to CUP, they should only see the one role in which they can Approve. In our case, the CUP screen shows all 5, even though they are only actually approving one of those 5. It is very confusing for Role Approvers. To them, it looks like they are Approving all 5 roles, when in reality, they are not and cannot.
Does this need to be submitted as an enhancement or is this functionality available in configuration?
Thanks!
Jes Behrens

Similar Messages

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

I downloaded the ipad app for kindle, my wife has the app on her iphone also with several books that she has downloaded to her iphone, how can i read these books on my ipad?

I downloaded the ipad app for kindle, my wife has the app on her iphone also with several books that she has downloaded to her iphone, how can i read these books on my ipad?

By sharing the same Amazon account on each device. You may also have to use the same Apple ID and password.

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

When I open a pdf document from my dropbox to view it, the document shows up blank, even though it is filled out. This also happened with pdf documents that have been e-mailed to me.

When I open a pdf document from my dropbox to view it, the document appears blank, even though I know the information is actually there. This also has happened with pdf documents that have been e-mailed to me, then opened to view and they are blank?? Why are they showing up blank?

When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that. Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
It's like once they go into iBooks they're stuck forever.

How can I get help with pending songs that have taken over 12 hours to fully download?

How can I get help with pending songs that have taken over 12 hours to fully download?

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

Create a CUP request with no roles

Hello
Is there a a way to create a CUP request only with free text and not with assigned roles? we are trying to find a way to configure that with no luck.
Since the end user does not know which roles he needs the customer asks that he will fill in his request in the free text space
(with the relevant mandatory fields that are in the initial screen) and the first approver will add the relevant roles based on the text that the user entered in the system.
Kind Regards,
Shira

Hello Shira,
Thats correct, there is no feature to force the approver to select roles prior to approval of the request.
In my case we were using default roles so every request created would have minimum set of default roles available in it. Apart from that, we forced the request to go through the Functional Lead stage who would be responsible to check if correct roles have been assigned to the request by the Functional Executive in the previous stage. Also, since the Functional Lead stage used the approver determinator as Role (role owner defined for roles), if there was no role attached by functional executive in previous stage, he/she would not be able to approve the request without any role as it would not be able to find the approver for the next stage and thus the system will throw error.
We also used the organizational process procedures to educate the functional excutive about their responsibilities of attaching roles to the request. So i would say that combination of factors worked for us in this scenario.
Regards, Varun

Releasing transport requests with job roles take forever after upgrading to Netweaver 7

Dear experts,
Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
Afterwards, the import in our QAS and PRD system don't take longer than normal.
Apparently this time is taken by the Export phase:
Checks at Operating System Level
17.04.2014 09:50:03
(0) Successfully Completed
Pre-Export Methods
17.04.2014 09:50:37
(0) Successfully Completed
Export
17.04.2014 13:51:02
(0) Successfully Completed
Does anyone know what causes this and how to solve?
Kind regards,
Nicolas

Hello Nicolas,
What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
Hope this helps to investigate the issue
Regards,
Archana

Report with the alerts that have been thrown

Hi all!
We are using the XI alerts to send several e-mails according to the alert that have been thrown.
Now, I would like to know if some report could be automatically generated showing the information of these alerts. Is it possible?
Thanks in advance.
Regards,
Sergi

Hi Sergi !
That's strange. I assume you tried with a wide date range, just to be sure that it is not a filter issue.
Try this:
go to TX 'ALRTCATDEF', locate your alert category and write down the name. Maybe you can get it from the RWB Alert Inbox, I'm not sure. Anyway, in the ALRTCATDEF tx there will be one or more alert categories already defined. Also you can find the alert category in use in the part of the scenario where the alert is triggered.
Then go to tx SLG1, in object filter keep the "*" and this time complete the "External ID" field with the name of the alert category, matching the case.
Try to find the alert this way.
Regards,
Matias.

ISE and authenticating against Windows AD with RADIUS realm that is different from the Windows domain

Hello
We are in the process of evaluating the Cisco ISE VMWare appliance with a view to replace our existing FreeRADIUS installation as authentication provider for our wireless network and VPN service. As a part of this we are hoping to migrate our user authentication to Microsoft Active Directory - we have previously authenticated against a different identity store (not MS AD). Because of this legacy our Windows domain is not the same as our RADIUS realm name - the Windows domain is "win.mydomain" whereas we wish to allow users to authenticate using "username@mydomain" or even "[email protected]" as they are doing today. We are experiencing an issue where authentication requests with the format "[email protected]" will be forwarded to the Windows AD whereas authentication requests with the format "username@mydomain" will fail with the log message "User not found in Active Directory". We do not know if the ISE itself is validating the username and triggering this error, or if the error originates from AD. We suspect the that the ISE is not even asking AD because "win.mydomain" is the domain configured in "Active Directory" in "External Identity Sources".
Authentication requests against the AD without a realm are successful (that is, using only "username"). With this in mind we located a post on the Cisco support forums that described a process of proxying the request back to the ISE and strip the realm information, but this was specific for the ACS platform. We have attempted to implement this solution but it is still not working as we would have hoped, and we are not entirely certain where the fault might lie. We are currently using PEAP with MSCHAPv2 for authentication in our WLAN where the main problem is. We suspect that the "proxy-to-self" with realm stripping is an issue with PEAP.
Is there a supported method of achieving our goal, or should we abandon the ISE platform as our scenario is simply not supported?

Seems like your issue maybe related to DNS, when ISE receives the format [email protected], the dns request is failing. However, there is a setting for alternate UPN Suffixes that can be configured to include domain.com and student.domain.com.
Here is a windows article that should fix this for you. Once you get this updated please reboot ISE so it rejoins AD. Try your tests again.
http://technet.microsoft.com/en-us/library/cc772007.aspx
Thanks,
Tarik Admani
*Please rate helpful posts*

Bought on ipad, can i share with my ipod that has different apple id?

I bought a song on my ipad, and would like to share with my ipod that has a different apple id. How do i do this?

Put all of the music on one computer and sync the idevices to that computer

Aperture replaces images with other images that have the same image number

Help! Aperture has started replacing images in recent projects with older images from elsewhere on my hard drive that have the same image number. Obviously I need a better numbering system, but can someone help me figure out why this is happening? I store master files on an external drive and the "replacement" files seem to be coming from identically named images on my local HD or in iPhoto.

I started renaming all of my images when I import them. I'm using referenced images to an external drive, although I still have a bunch of older images stored in the Aperture library under my old numbering system (which was basically whatever image number the camera generated)....need to move them all to the external drive but haven't had time.
So here's the latest problem: Today, Aperture started replacing images in albums (referenced images with unique file names under my new system) with old images even though the file names weren't even remotely close. It also replaced the images with the preview for the old image (230 pixels wide). "Show master" showed me the preview for the old image, not the correct image.
I tried forcing an update to the preview, but it had no effect. The real masters are intact on the external drive, but this is really scaring me. It happens out of the blue, right in front of me...I watch as my images appear to be replaced with random old images in Aperture. It appears to have nothing to do with file names, as I'm now using totally unique file names.

CUP - How to handel requests with no auto provisioning

Dear Friends,
We are not using Auto-Provisioning in our CUP component.
We don't know how to handle a situation when although the request was approved at all stages, the provisioning it self (which is executed manually) does not happen (for example, the security manger forgot to do the changes).
How can we detect those differences ?
And if we did detect them, is there a possibility to add some comments to a request that was fully approved.
thanks
Yudit

Hi Yudit,
Not exactly. It is some manual work.
CUP>>Informer>>Provisioning
Run these two reports (select specific period):
Role Assigned / Removed
User Processed
Run t-code RSSCD100_PFCG_USER (You find this repot in SUIM).
Use the same period as above.
Export the report to Excel. If many entries, create a function to compare the results orilter the result by Action and compare to CUP reports.
Good luck,
Vit

I had a quick links bar with several sites that I use on a daily basis, it is now missing and I need to find where it went?

I had a quick links bar that contained several of my daily sites. Today I opened Firefox and that bar is no longer there. I have tried to find it under the "View" tab but nothing exists. Where did it go and how do I bring it back?
== This happened ==
Just once or twice
== today

Hello Christian.
If it was the Bookmarks toolbar and it's no longer visible, you can make it visible by going into ''View > Toolbars > Bookmarks Toolbar''.
If the Bookmarks toolbar is visible but no bookmarks are displayed, go into ''Bookmarks > Bookmarks Toolbar'' and see if there's anything inside it. If there is, go into ''View > Toolbars > Customize... > Restore default set'', to restore your interface buttons to their default postion. If there is nothing inside ''Bookmarks > Bookmarks Toolbar'', something deleted what was inside it. You should be able to restore your bookmarks by going into ''Bookmarks > Organize Bookmarks... > Import and Backup > Restore''.
If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

In my application folder i have several applications that have a circle with a cross what does this mean?

When i go to my application folder several of the apps have a circle wih a slash .
what does this mean? However everything opens fine. its for address book, ichat and ical.
its been like this since the last time i formated .

I don't think i migrated anything over, i had a bit of trouble restoring my accoun from a backup and never actually did.
My time mechine backups are currently on a hard drive adn the only way to access the data is to run StellarPhonixMacDataRecovery every time to accesss my data.
But thats an entirely other problem/ storey.
So if i press commmand R when it starts do i need my Mac OX Disc becuse i baught the newest version on MAC OX X from the app store.
The funny thing is , even tho there is a cirlce with a slash all the applictions in question that has this works fine like ical and address book, iuse them all the time.
thanks for your repleis

CUP 5.3 SP8 - Requests with several roles that have different approvers

Similar Messages

Maybe you are looking for