CUP maximum user count

So I AD integrated UCM (6.1) and I see 3300 end users. Now when I flip over to CUP (7.0) I only see 1,062 users....
My fear is that I have hit a limit on the box, but my hope is that someone has a work around.
It is a 7825 which has a user limit of 1,000, but I had assumed that the limit was based on the number of CUP/CUPC enabled users and not on the total user count.
I really hope there is a workaround.
Thanks,
-Scott

Please clarify what you mean by CUP only sees 1062 users? CUPS or CUPC? In CUPS, I thought that the user list would only show the users you flagged in CUCM with the CUPS/CUPC feature. IOW, users are only replicated when they are enabled for CUPS use. At least, that is my understanding.
From an LDAP query perspective. I believe this is done by CUPC (even though CUPS has a the LDAP search string specified).
The question I have: How many users in CUCM are enabled with the CUPS/CUPC feature? Is it 1062?
HTH.
Regards,
Bill

Similar Messages

OEAP 600 Series - Maximum User Count

Supported User Count
Only fifteen users are allowed to connect on the WLAN Controller WLANs provided on the 600 series at any one time. A sixteenth user cannot authenticate until one of the first clients de-authenticates or a timeout occurred on the controller.
Note: This number is cumulative across the controller WLANs on the 600 series.
For example, if two controller WLANs are configured and there are fifteen users on one of the WLANs, no users will be able to join the other WLAN on the 600 series at that time. This limit does not apply to the local private WLANs that the end user configures on the 600 series designed for personal use and clients connected on these private WLANs or on the wired ports do not affect these limits.
This is from the Configuration Guide for teh 600 series Office Extend AP. Is this count per AP or total per WLC? If I have 10 APs deployed to our remote users, can each AP support two simultaneous users? Would I need to use separate WLANs for each OEAP?

Hello,
For More information on OEAP-600, please watch the "Community Tech-Talk Series" Cisco Office Extend Access Point OEAP-600
https://supportforums.cisco.com/community/netpro/wireless-mobility/begin-wireless/blog/2012/02/24/cisco-office-extend-access-point-oeap-600
Thanks,
Vinay Sharma
Community Manager - Wireless

Maximum activation count (1 user) already reached on a new install

I just installed a new Adobe Acrobat XI Standard package ordered from a third party. The first time I invoked the application, I received an error message that the maximum activation count (1 user) had been reached. I had 30 days to deactivate one user and activate this computer, What has to be done to overcome this problem?
I have contacted the seller, but have yet to hear from him.

contact adobe support and ask for an activation count reset, http://www.adobe.com/support/chat/ivrchat.html

EAS v11 - User count

Hi,
We have migrated to new V11 of Essbase and we have maximum limit to keep User counts till 600. Is there a way of keeping this User count and keep on checking if it has touched the limit of 600 and if yes then show an alert. Anything is fine- MAXL/script etc?
Thanks in advance for the solution.

In Maxl have a look at "Display Session" :- http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/maxl_dispsess.html
If you want something more advanced then it is probably worth looking into one of the APIs :-http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_api_ref/launch.html
Cheers
John
http://john-goodwin.blogspot.com/

Dynamically set maximum row count in Interactive Report

Hi,
Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
Thanks,
Mike

Hi Mike,
You can do that with javascript
gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
any number means any number but not higher than the number you set at Maximum Rows Per Page.
You probably can mix the solution from Martin and the above code.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
Edited by: kvlek on 24-apr-2013 12:29
Edited by: kvlek on 24-apr-2013 12:35

How to find Maximum Record Count in a particular section

Hi ALL
My report has 3 detail sections. I am showing different set of data in each section.
Example:
Details a
Details b
Details c
In the Details c section I have 5 columns.
I want to find out MAXIMUM RECORD COUNT in only Details c.
Actually I have done a running total on column1 field which gives me the records number in that section only. But I am not able to find the MAXIMUM record count.
Rtotal   Colum1   Column 2 Column3
1          Data1     Data2      Data3
2          Data1     Data2      Data3
3          Data1     Data2      Data3
4          Data1     Data2      Data3
Now I need the Maximum record count=4
Thanks.

If I have understood correctly you want to count the amount of records in each section.
In this case, go to "Insert > Summary", choose your ID field, and choose "Count" in "Calculate this summary:". You can put the summary in your group footer.
If you want the maximum (the highest number value in that column), you can choose "Maximum" instead of "Count".

How to get user count by Planning app in 11.1.2.1

I have no. of planning apps and I need to get a user count by application.
I tried to export the security by using LCM but the export doesn't provide the information in a readable format.
Is there a way to generate a report where I can get the count (user ids) by planning app ?
Thanks in advance

Could you not get somebody to run the queries for you they quick and simple
anyway if you have to go down the filter per user route then maybe you could use maxl and spool the output.
e.g.
login admin password on servername;
spool on to "path\filename.txt";
display filter on database appname.dbname;
spool off;
logout;
Cheers
John
http://john-goodwin.blogspot.com/

User Count.

Hi All.
First of all, I'm sorry for my English. But, I'll do my best to explain.
I'm developing Text Chat App with FMS 4, Flex 4.6.
I want to count how many users in.
I've searched enough. And I made some codes.
Server Side Code(main.asc)
application.onAppStart = function()
trace("hihihi");
application.onConnect = function(client)
application.acceptConnection(client);
userCount = application.clients.length;
// Define new client function for a nc.call().
client.callFromClient = function() {
return userCount;
application.onDisconnect = function(client){
trace("Connection is disconnected!!!");
userCount = application.clients.length;
trace("length is " + userCount);
for(var i=0; i<application.clients.length; i++){
application.clients[i].call("setUserCount", null, userCount);
SimpleChatTest.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx"
      width="497" height="518" minWidth="955" minHeight="600" creationComplete="initApp()">
<fx:Script>
<![CDATA[
   private var nc:NetConnection;
   private var so:SharedObject;
   private var soUserCount:SharedObject;
   private var myResponder:Responder = new Responder(onReply);
   private function initApp():void{
    nc = new NetConnection();
    nc.client = this;
    nc.connect("rtmp://127.0.0.1/SimpleChatTest/");
    nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
    nc.call("callFromClient", myResponder, "Server");
   private function netStatusHandler(event:NetStatusEvent):void{
    switch(event.info.code){
     case "NetConnection.Connect.Success":
      trace("Success Connection!!");
      // share chat contents
      so = SharedObject.getRemote("simpleChat", nc.uri, false);
      so.addEventListener(SyncEvent.SYNC, syncHandler);
      so.connect(nc);
      // share user count
      soUserCount = SharedObject.getRemote("userCount", nc.uri, false);
      soUserCount.addEventListener(SyncEvent.SYNC, syncHandler_UserCount);
      soUserCount.connect(nc);
      break;
   private function syncHandler(event:SyncEvent):void{
    if(so.data["simpleChat"] != undefined){
     view.text += so.data["simpleChat"] + "\n";
   private function syncHandler_UserCount(event:SyncEvent):void{
     trace("soUserCount.data[userCount] in syncHandlerMethod : ", soUserCount.data["userCount"]);
     viewCount.text = soUserCount.data["userCount"];
   /* ServerSide에서 Client length가져오기*/
   public function setUserCount(userCount:Number):void{
    soUserCount.setProperty("userCount", userCount.toString());
   // Responder function for nc.call()
   private function onReply(result:Object):void
    trace("result : " + result);
    soUserCount.setProperty("userCount", result.toString());
    trace("soUserCount.data[userCount] : ", soUserCount.data["userCount"]);
   private function sendMessage():void{
    so.setProperty("simpleChat", textInput.text);
    textInput.text = "";
]]>
</fx:Script>
<fx:Declarations>

</fx:Declarations>
<s:TextArea x="10" y="10" width="329" height="468" id="view"/>
<s:TextInput x="10" y="486" width="246" enter="sendMessage()" id="textInput"/>
<s:Button x="264" y="487" label="Send" click="sendMessage()"/>
<s:Label x="347" y="10" text="Total Users : "/>
<s:Label x="455" y="10" id="viewCount"/>
</s:Application>
I traced result of SharedObject.
Result
Success Connection!!
result : 1
soUserCount.data[userCount] 1
soUserCount.data[userCount] in syncHandlerMethod undefined --> why?
I can't understand why sharedobject's data is dissipated??
Thanks in advanced.
Kevin.
ps. I also wanna use SharedObject in Server Side. Unfortunately I tried tried tried tried many times... But I don't know how to do it. I'm newbie to flex&FMS. Is there some example about that?

Add a method on main.asc as below:
Client.prototype.userCount = function()
     // get the number of connected users
     var count = application.clients.length;
     this.call("receiveUsercount", null, count);
And add a method in client side code ( in initApp() ) as below:
nc.receiveUsercount = function (count)
//do code here
     trace("Total Users:" + count );
Now call the FMS method (as below) from client side code when you want current user count details from FMS:
nc.call("userCount", null);

How to set maximum redelivery count

hi,
Within my JCD I am throwing an exception to roll back a message so that it will be redelivered in case of an error. From the log I can see that the message is redelivered.
Now, I'm trying to find a way to set the maximum redelivery count within the JCD. Or a better way maybe find out how many times the message has been redelivered, so I can send it to a dead message/error queue when it reaches a certain number.
Is this possible? Has anyone done similar thing?
thanks
Ari

For JCAPS 5.1.1 see
<CAPSInstallRoot>/lofgicalhost/extra/JMSJCA-readme.html, section named
Redelivery Handling (deadletter queue).
Thanks Frederic :-)

Maximum record counts and property counts

Hello,
I am looking for the document/link that mentions maximum record counts and maximum property counts for each record.
let say there are 1.5million records and each record has 2000 properties. Not sure if it can be handled nicely.
Mdex version is 6.2.1 at this point. but can upgrade if higher version can handle more.
Thanks,

Jeremy is pretty much correct. There are no limitations except by performance.
Start with the Performance Tuning Guide - here is a link to the 6.4.1 document:
http://docs.oracle.com/cd/E41223_01/Mdex.641/pdf/PerfTuningGuide.pdf
For your questions, start with Chapter 5 and read how properties/dimensions affect performance and this will help drive how you architect your queries and pipeline configuration/index setup to be most efficient.

How to increase maximum channel count?

Hi,
i have a big problem with my director app.
I create for a game(dots and boxes) 300 objects by using a
parent skript. Each generated Sprite takes his own channel. But
director offers only 150 channels so i can only add 150 Sprites.
Does anybody have an idea to increas the maximum channel
count.
-- Edit
Oh, sorry. I have found the option in the settings. 1000 is
the highest.

modity>movie>properties
In the property inspector at the movie tab there will be an
entry for
channels. Change this number.
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"megabook" <[email protected]> wrote in
message
news:e80f92$7h9$[email protected]..
> Hi,
> i have a big problem with my director app.
>
> I create for a game(dots and boxes) 300 objects by using
a parent skript.
> Each
> generated Sprite takes his own channel. But director
offers only 150
> channels
> so i can only add 150 Sprites.
>
> Does anybody have an idea to increas the maximum channel
count.
>
>

What is the powershell command to get the user count in Active Directory

What is the powershell command to get the user count in Active Directory

Get-ADuser
REF: http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/30/powertip-single-line-powershell-command-to-list-all-users-in-an-ou.aspx
This post is provided AS IS with no warranties or guarantees, and confers no rights.
~~~
Questo post non fornisce garanzie e non conferisce diritti

Maximum Row Count - dynamically change

Hi,
How can I change dynamically (eg. from some item) value "Maximum Row Count" in "Report Attributes -> Layout and Pagination"?
Is this possible?
best regards,
Jarek

Thank you for your answer, but I want to do something else.
I want to show all rows from my query in report with pagination.
The number of rows increases.
According to documentation, field "Number of Rows" sets the number of rows which I can see on one page and field "Maximum Row Count" sets the maximum number of rows which I can see on all pages (number of rows to query).
I thougth, that when I set (before page is shown) a variable from eg. query "SELECT count(*) FROM table", I will be able to put this variable name in "Maximum Row Count" field, to see all rows from my query. However this field is the numeric field and I can't put any variable name there :(
The only way to always show all records from my query is to set "Maximum Row Count" field to very high number? Is this natural way in apex? Is this only way?
best regards,
Jarek

Maximum lock count exceeded - Details to debug

Hello ,
I have a site that is developed on Jdeveloper using jspx pages . This site is deployed on WLS but occassionaly I am seeing that the pages show up blank . After a short while refresh of the page brings the page back to normalcy as in shows the details , images etc .
During the period when the page goes blank following error stack is captured in the server logs :
Caused By: weblogic.servlet.jsp.CompilationException: Failed to compile JSP /_intradoc_/wcm/app/groups/sgsitedesignasset/@hmc/documents/sitedesignasset/mdaw/mdaw/~edisp/st_mainkv5.jspx
Exception occurred while processing '/_intradoc_/wcm/app/groups/sgsitedesignasset/@hmc/documents/sitedesignasset/mdaw/mdaw/~edisp/st_mainkv5.jspx'java.lang.Error: Maximum lock count exceeded
at java.util.concurrent.locks.ReentrantReadWriteLock$Sync.tryAcquireShared(ReentrantReadWriteLock.java:395)
at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireShared(AbstractQueuedSynchronizer.java:1260)
at java.util.concurrent.locks.ReentrantReadWriteLock$ReadLock.lock(ReentrantReadWriteLock.java:594)
at oracle.stellent.wcm.server.content.spi.fs.FileSystemLoader$SingleLockStrategy.lockShared(FileSystemLoader.java:116)
at oracle.stellent.wcm.server.content.spi.fs.FileSystemLoader$MultiLockStrategy.lockShared(FileSystemLoader.java:185)
at oracle.stellent.wcm.server.content.spi.fs.FileSystemLoader.readAndStoreOnlineContent(FileSystemLoader.java:349)
at oracle.stellent.wcm.server.content.spi.fs.FileSystemLoader.readAndStoreStream(FileSystemLoader.java:311)
at oracle.stellent.wcm.server.content.spi.fs.FSContentAdapter.loadContent(FSContentAdapter.java:163)
at oracle.stellent.wcm.server.content.spi.fs.FSLocalModifiedContentAdapter.loadContent(FSLocalModifiedContentAdapter.java:123)
at oracle.stellent.wcm.javaee.shared.jsp.IdcJspProvider.fromStream(IdcJspProvider.java:86)
at oracle.adf.library.webapp.ADFJspResourceProvider.fromStream(ADFJspResourceProvider.java:328)
at weblogic.jsp.wlw.util.filesystem.mds.MDSFileSystem.getInputStream(MDSFileSystem.java:78)
at weblogic.jsp.wlw.util.filesystem.FS.getInputStream(FS.java:224)
at weblogic.jsp.wlw.util.filesystem.FS.getReader(FS.java:246)
at weblogic.jsp.internal.SourceFile.getReader(SourceFile.java:230)
at weblogic.jsp.internal.SourceFile.getTokenStream(SourceFile.java:384)
at weblogic.jsp.internal.SourceFile.getAst(SourceFile.java:533)
at weblogic.jsp.internal.SourceFile.check(SourceFile.java:335)
at weblogic.jsp.internal.ProxySourceFile.codeGen(ProxySourceFile.java:224)
at weblogic.jsp.internal.SourceFile.codeGen(SourceFile.java:327)
at weblogic.jsp.internal.client.ClientUtilsImpl$CodeGenJob.run(ClientUtilsImpl.java:599)
at weblogic.jsp.internal.client.Job.performJob(Job.java:83)
at weblogic.jsp.internal.client.SyncThreadPool.addJob(SyncThreadPool.java:31)
at weblogic.jsp.internal.client.SyncThreadPool.addJob(SyncThreadPool.java:19)
at weblogic.jsp.internal.client.ClientUtilsImpl.build(ClientUtilsImpl.java:348)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:153)
at weblogic.servlet.jsp.ResourceProviderJavelinxJspStub.compilePage(ResourceProviderJavelinxJspStub.java:78)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
at weblogic.servlet.jsp.ResourceProviderJspStub.execute(ResourceProviderJspStub.java:48)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
at oracle.stellent.wcm.javaee.ServletRequestContext.executePath(ServletRequestContext.java:243)
at oracle.stellent.wcm.client.RequestContext.process(RequestContext.java:189)
at oracle.stellent.wcm.client.RequestContext.include(RequestContext.java:144)
at oracle.stellent.wcm.client.invokers.ResponseHandler.evaluateScript(ResponseHandler.java:217)
at oracle.stellent.wcm.javaee.taglib.BaseTag$1.evaluateScript(BaseTag.java:114)
at oracle.stellent.wcm.client.invokers.ResponseHandler.handleResponse(ResponseHandler.java:146)
at oracle.stellent.wcm.client.invokers.ResponseHandler.handleResponse(ResponseHandler.java:111)
at oracle.stellent.wcm.javaee.taglib.BaseTag$1.handleResponse(BaseTag.java:121)
at oracle.stellent.wcm.client.invokers.RequestInvoker.handleResponse(RequestInvoker.java:222)
at oracle.stellent.wcm.client.invokers.impl.ContributableInvoker.handleResponse(ContributableInvoker.java:53)
at oracle.stellent.wcm.client.invokers.impl.PlaceholderInvoker.handleResponse(PlaceholderInvoker.java:70)
at oracle.stellent.wcm.client.invokers.RequestInvoker.invokeRequest(RequestInvoker.java:145)
at oracle.stellent.wcm.javaee.taglib.BaseTag.doTag(BaseTag.java:127)
at jsp_servlet._intradoc._wcm._app._groups._sgsitedesignasset.__64_hmc._documents._sitedesignasset._mdaw._mdaw.__126_edisp.__pt_pip_jspx._jspService(__pt_pip_jspx.java:704)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.jsp.ResourceProviderJspStub.execute(ResourceProviderJspStub.java:48)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.stellent.wcm.javaee.servlet.filter.WCMSiteFilter.doFilter(WCMSiteFilter.java:156)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at oracle.stellent.wcm.javaee.ServletRequestContext.executePath(ServletRequestContext.java:247)
at oracle.stellent.wcm.client.RequestContext.process(RequestContext.java:189)
at oracle.stellent.wcm.client.RequestContext.forward(RequestContext.java:157)
at oracle.stellent.wcm.client.invokers.ResponseHandler.evaluateScript(ResponseHandler.java:215)
at oracle.stellent.wcm.client.invokers.ResponseHandler.handleResponse(ResponseHandler.java:146)
at oracle.stellent.wcm.client.invokers.ResponseHandler.handleResponse(ResponseHandler.java:111)
at oracle.stellent.wcm.client.invokers.RequestInvoker.handleResponse(RequestInvoker.java:222)
at oracle.stellent.wcm.client.invokers.impl.PageInvoker.handleResponse(PageInvoker.java:75)
at oracle.stellent.wcm.client.invokers.RequestInvoker.invokeRequest(RequestInvoker.java:145)
at oracle.stellent.wcm.javaee.servlet.filter.WCMSiteFilter.handlePageInvocation(WCMSiteFilter.java:326)
at oracle.stellent.wcm.javaee.servlet.filter.WCMSiteFilter.doFilter(WCMSiteFilter.java:174)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
I am not able to figure out what / how to go about troubleshooting this issue .
Can someone shed some light on the error mentioned above and let me know how to proceed with debugging this issue ?
Site is deployed on WLS 10.3.5 on a separate managed server .
Any inputs will be highly appreciated .
Thanks
Srinath

Code put in st_mainkv5.jspx is :
ï»¿<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:fn="http://java.sun.com/jsp/jstl/functions"
xmlns:c="http://java.sun.com/jsp/jstl/core"
xmlns:wcm="http://www.oracle.com/jsp/wcm">
<script type='text/javascript'>
//<![CDATA[
var country = "${siteCode}";
var cubeList = new Array();
var firstCube = 2;
cubeList = ["home","gallery", "experience", "mostlike", "talkntalk"];
//]]>
</script>
<wcm:placeholder name="Cube Setting"/>
<jsp:useBean id="map" class="java.util.HashMap"/>
<jsp:scriptlet>
String tmpCube = request.getParameter("Cube");
map.put("ssCube", tmpCube);
</jsp:scriptlet>
<c:set var="ssCube" value="${map.ssCube}"/>
<c:choose>
<c:when test="${ssCube eq 'keyvisual'}">
<script>var firstCube = 1;</script>
</c:when>
<c:when test="${ssCube eq 'gallery'}">
<script>var firstCube = 2;</script>
</c:when>
<c:when test="${ssCube eq 'experience'}">
<script>var firstCube = 3;</script>
</c:when>
<c:when test="${ssCube eq 'mostlike'}">
<script>var firstCube = 4;</script>
</c:when>
<c:when test="${ssCube eq 'talkntalk'}">
<script>var firstCube = 5;</script>
</c:when>
<c:otherwise>
<script>var firstCube = 1;</script>
</c:otherwise>
</c:choose>
<script type='text/javascript'>
//<![CDATA[
var cubeList = new Array();
cubeList = ["home","gallery", "experience", "mostlike", "talkntalk"];
function cubeStart(va) {
// ììíë¸ì ì¤ì ì»¨íì¸ ë ì´ í¨ììì ajax í¨ìë¥¼ ì¤í ìì¼ì ë¿ë ¤ì£¼ëë¡ í´ì£¼ì¸ì.
// ëëê·¸íê±°ë ë²í¼ì í´ë¦íì¬ íë¸ê° ì¢ì° ì¤í¬ë¡¤ì´ ëë©´, í´ë¹íë íë¸ì ì«ì(1~5)ë¥¼ ì¸ìë¡ ë°ì ì´ í¨ìê° ì¤íë©ëë¤.
// ì«ìì íë¸ê° íì 1:1 ëìì¸ ê²ì ìëëë¤.
// íë¸ë ìµë 5ê°ê¹ì§ ì¶ë ¥ëê³ , ìì ì¬ì© ì¬ë¶/pipì¸ì§ generalì¸ì§ì ë°ë¼ 3ê°ë§ ì¶ë ¥ëë ê²½ì°ë ììµëë¤.
//alert("Cube"va" is Ready.");
if (va==1) { // main
// ì²ë¦¬ ë´ì© ìì, HTMLìì ì¶ë ¥ëëë¡ í´ ì£¼ìë©´ ë©ëë¤.
} else if (va==2) { // gallery
cubeGalleryCustomiz('1','All')
} else if (va==3) { // experience
cubeExterienceCustomiz('exterior','0','');
} else if (va==4) { // mostlike
executeArea4();
// ìµì´ ë¡ë©ì ë¿ë§ ìëë¼, ê° 1/2/3ì ë§í¬ í´ë¦í ë ìë ë¤ì ì¤íëì´ì¼ í©ëë¤.
// cubeMostLikeCate()ë ì¹´íê³ ë¦¬ë¥¼ ì¶ë ¥íë í¨ììëë¤.
// 1) ì íë ë²í¸, 1~3 ì¤ íë.
// 2) ì²«ë²ì§¸ íë¡í ì´ë¯¸ì§
// 3) ëë²ì§¸ íë¡í ì´ë¯¸ì§
// 4) ì¸ë²ì§¸ íë¡í ì´ë¯¸ì§
// 5) ì²«ë²ì§¸ ì´ë¦
// 6) ëë²ì§¸ ì´ë¦
// 7) ì¸ë²ì§¸ ì´ë¦
//cubeMostLikeCate(1,'/img_tmp/profile30.jpg','/img_tmp/profile30.jpg','/img_tmp/profile30.jpg','Jeff','Antonio','Jane');
// cubeMostLike ë²í¼ì ì¤ë¥¸ìª½ ë´ì©ì´ ë°ëë í¨ììëë¤.
// 1) ìëì°¨ ì´ë¦
// 2) Trim (ìë§ë..)
// 3) ì íí ìµì¤íë¦¬ì´ ì´ë¯¸ì§ (ìì´ì½ ì´ë¯¸ì§ ê²½ë¡)
// 4) ì íí ì¸íë¦¬ì´ ì´ë¯¸ì§ (ìì´ì½ ì´ë¯¸ì§ ê²½ë¡)
// 5) ìëì°¨ ì´ë¯¸ì§
// 6) See More ë§í¬
// 7) Car Builder ë§í¬
// 8) Linkë²í¼ ì½ë
// cubeMostLike('ABC','Test','/img_tmp/exterior_gray.png','/img_tmp/interior_brown.png','/img_tmp/car_mostlike.png','#','#','<img src="/img_tmp/like.gif" alt="" />');
} else if (va==5) { // talk n talk
executeArea5();
// ì´ê¸°í ìí¤ë í¨ì
//cubeTalknTalkInit();
// ê°ê°ì íì¤í¸ë¥¼ ë¿ë ¤ ì¤ëë¤.
// 1) ë²í¸ 1~6
// 2) facebook or twitter
// 3) íë¡í ì´ë¯¸ì§
// 4) ì´ë¦
// 5) ë´ì©
//cubeTalknTalk(1,'facebook','/img_tmp/profile25.jpg','Dabby whistler','I can\'t belive my eyes. AZERA is so nice');
//cubeTalknTalk(2,'twitter','/img_tmp/profile25.jpg','Dabby whistler','I can\'t belive my eyes. AZERA is so nice');
//cubeTalknTalk(3,'facebook','/img_tmp/profile25.jpg','Dabby whistler','AZERA has a good performance to drive. It\'s really interesting for me');
//cubeTalknTalk(4,'twitter','/img_tmp/profile25.jpg','Dabby whistler','I can\'t belive my eyes. AZERA is so nice');
//cubeTalknTalk(5,'facebook','/img_tmp/profile25.jpg','Dabby whistler','AZERA has a good performance to drive. It\'s really interesting for me');
//cubeTalknTalk(6,'facebook','/img_tmp/profile25.jpg','Dabby whistler','I can\'t belive my eyes. AZERA is so nice');
//]]>
</script>

<wcm:placeholder name="CUBE MAIN"/>
<wcm:placeholder name="CUBE GALLERY"/>
<wcm:placeholder name="CUBE EXPERIENCE"/>
<wcm:placeholder name="CUBE MOST LIKE"/>
<wcm:placeholder name="CUBE TALK TALK"/>
<img src="/es/images/common/bg/blank.gif" alt="previous" />
<img src="/es/images/common/bg/blank.gif" alt="next" />

</jsp:root>

Portal on-line users counter

I would like to show Portal on-line users count at start-page.
I there any standard portlet for this?
If there are no - how can I get this with Java or PL/SQL?

I have the same problem but have you ever thought about a counter for every page of your portal? I' am working on this in an intranet OAS portal 10.etc .Maybe we should reconsider of extracting/publishing some modified features from a web-statistics software upon the servers we use....
Message was edited by:
geo_hon

CUP maximum user count

Similar Messages

Maybe you are looking for