CUP MOC call control OCS change

            We have cup 7.08 , cucm 7.x .
CUP is integrated to custers OCS servers to provide call control. Customer is changing their OCS servers to OCS R2 (new servers) , they are also changing domain the OCS servers sit in.
Would I be correct to assume that all we have to do is update the existing incoming access control lists for the new servers and also update our dns server's to resolve to the new domain - please advise, any other changes.?? 
The proxy domain is currently not set anyway so hopefully won't need to touch that. Customer will require both OCS servers to be working in tandem for migration , i.e OCS 2007 and OCS 2007 R2 ..... Regards  Jaginder       

RCC or Remote call control needs a bit more configuration on OCS side and CUPS side. Please follow the doc here -
http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_Configuring_Cisco_Unified_Presence_Release_7.x_with_Microsoft_OCS_for_Remote_Call_Control
Please skip the security part if TLS is not desired.
Following three sections are necessary -
How to Configure Cisco Unified Communications Manager for Integration with Microsoft OCS for Remote Call Control
How to Configure Cisco Unified Presence for Integration with Microsoft OCS
How To Configure the Deskphone Control Settings
Hope it helps!

Similar Messages

  • Presence status not changed when using Lync 2010 Remote Call Control

    Hello,
    I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
    OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
    Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
    Thank you in advance,
    Martin

    I think there's something missing from your scenario and I don't believe you would need a plugin for this.  It's been forever since I've set up RCC with Lync 2010 however.  I know this isn't what you're looking for, but I've used this product in
    the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
    http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system.  If you can get a trial it might help you compare apples to apples provided
    you have a TAPI driver for your PBX.
    For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
    http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Call Control not in option Jabber for Win 9.2.6

    the call controll in the options menu is not available so we are unable to change UCM clusters

    the call controll in the options menu is not available so we are unable to change UCM clusters

  • Programatically calling control flows from java code

    Hi all,
    I have a bounded taskFlow that uses pageFragments. This flow is a region in a page(.jspx).
    In my page fragment, I have a inputComboboxListOfValues with a ValueChangeListener code in a java bean.
    I want when a value is changed, to programatically call "controll flow" (this one has: "From Activity Id" -the page fragment with that inputComboboxListOfValues, and "To Activity Id" - the default Activity on this task Flow).
    So when the value change, practically I want to restart the flow programatically and pass the selected value as input parameter.
    Since the inputComboboxListOfValues is not like a button where in the "Action" property you can set the Control Flow and navigate somewhere, the only option I have is to programatically cause navigation from java code (example: the value change listener code).
    Can this be achieved?
    Any advice is helpfull.

    Hi,
    Absolutely, you can do it using the NavigationHandler. Try the following in you value change listener:
    FacesContext context = FacesContext.getcurrentInstance();
    NavigationHandler handler = context.getApplication().getNavigationHandler();
    handler.handleNavigation(context, null, outcome);
    // Render the response after that phase, the button actions should not be called
    context.renderResponse();
    // Add the following line if you want to prevent further value change listeners to be called
    // throw new AbortProcessingException();Regards,
    ~ Simon

  • Control Table changes

    Hello All,
    Can anyione help me on this. I am not able to understand what control table changes mean. I know what Table controls are but not known to control table.
    And they are different from each other.
    Can anyone please help me on this.
    Regards
    anu

    hi,
    WELCOME  TO SDN.
    *Control Tables
    The search indexes for address data, as well as the address data itself, are client-dependent. There can now be other differentiations within a client. These are called "Index pools".
    The division reflects the fact that multiple areas of master data are involved, which differ from the business embedding in the SAP System and from the technical implementation.
    Two such index pools are currently defined in table TSADRVGRP with a technical key derived from control table TSADRV:
    For More details
    http://help.sap.com/saphelp_nw04/helpdata/en/81/23a63a8e1d1e49e10000000a11402f/content.htm
    Hope this will help you.
    Rewrd points, if found helpful
    Regards
    ANVER

  • Script help - caller's ANI and workflow call control actions

    Greetings!
    Apologies in advance for the wall of text.
    What does work: We have a main script where we do a database lookup on the caller's ANI - specifically, their area code. If there is a match in the DB we queue the call to a regional queue. If there is no match (some block their caller ID, or the ANI is less than 10 digits) we queue the call to a general queue. This works. Every time.
    Except ..
    So the call comes in, we do a successful lookup and route to the regional queue. The agent handles the call and transfers the caller to another queue. The agent in the second queue discovers the caller needs to go back to the regional queue and we have a call control action configured to handle this. And this is where I'm looking for some help.
    And so, the call control action setup does a blind conference back to the main script which does the lookup again based on the original caller's ANI and routes the call to the regional queue. However, everyone can hear everyone and the business unit would prefer the customer not be aware of the agents talking until the agents want to bring the customer into the conversation.
    So, if I change the call control action to another option (supervised conference) I lose the ability to route the call based on the original callers ANI. The main script queues the call to the general queue. I've done the reactive debugs and the caller ANI does not populate, the extension of the agent initiating the call control action populates the ANI field. What's more confusing is the caller ANI does populate in the enterprise data on the agent desktop. So the data must be "there" somewhere, I'm not sure how to get it so I can do the DB lookup.
    What am I missing?
    Thanks in advance for your time and attention!
    Keith

    Hello again.
    That's an nice way to do this. But I found another way around simple enough for the end customer too. It gives the ability to change things themselves.
    a) Under System Parameters > Media Parameters enable the 'User Prompts override System Prompts' parameter
    b) Create a subfolder (named el_GR in my case) under Applications > Prompts .../gen/phone
    c) Upload your number prompts recorded in the language you want
    d) Modify the 'Create Generated Prompt' as shown to the screenshot
    e) Now you can hear the string numbers in your language
    Took the info from the following posts:
    https://supportforums.cisco.com/thread/2080962
    https://supportforums.cisco.com/docs/DOC-13933

  • Ssrs control break changes

    In a new SSRS 2008 r2 report, I want to display an underline for the entire detail line when one of control break changes. The entire detail line, also includes the 2 control breaks. The 2 control breaks are called payment date and customer number.
    Right now I just have the bottom border of the detail line displaying the bottom border is solid and black. This is ther part I know that I need to change.
    Also, There is a border I can mark for customer number but there is not a border that I can mark for the payment date. The border for the payment date includes 2 rows. The border for the rest of the detail lines is for one row and that also includes the
    customer name.
    Thus can you tell me how I can a black line being displayed everytime a control break changes?

    Each cell in the tablix has a textbox inserted by default. If you select the textbox with the data you wish to underline, and open the textbox properties > Font >Effects (or TextDecoration if working from properties pane instead of properties dialog
    box). You can use expression editor to set this to "underline":
    =IIf(<Comparison Boolean>=True,"Underline","None")
    Since you are using textbox properties, it should work for all of the values you wish to underline.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • [svn:fx-trunk] 9407: Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties .

    Revision: 9407
    Author:   [email protected]
    Date:     2009-08-19 15:11:34 -0700 (Wed, 19 Aug 2009)
    Log Message:
    Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties.  This states test exposed this.
    We should rethink if we want to clear hostFormat rather than have a hostFormatChanged flag.  If there is no hostFormat at measure then it has to be fixed because there is no line break format to check for auto-size.
    QE notes:
    Doc notes:
    Bugs: SDK-22779
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22779
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as

    Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
    In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
    Basically you can create a sequence simply typing;
    CREATE SEQUENCE MY_SEQUENCE;
    now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
    select MY_SEQUENCE.nextval from dual;
    I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
    Then insert you record and use that number part of your primary key. I think that's it. Have fun.

  • How to check if a user has clicked on a digital control and changed its value?

    Greetings !!!
    I am looking for a simple way (without using Windows messages)of knowing if an user has clicked on a digital control and changed its value.
    I have tried the key focus property; but I have to click twice to make it work.
    If somebody knows a better solution; please let me know.
    Thank you in advance for your help

    If you just want to know if the value has changed you can put it in a while loop and use shift registers to see if the value has changed.
    Brian
    Attachments:
    Changed.vi ‏22 KB

  • CUxAC 8.6 Call Control Icons not displayed

    Anyone came across a new install of CUxAC 8.6, were the call control icons are not showing at all. If so, how can you get them to show? The icons im speaking about are the few icons between the F7 and F8 area.

    It has been resolved for me. When looking around I noticed that I did not have the option to select toolbars under the view section. So I just did a uninstall/reinstall of the CUxAC software and it came back online properly with the toolbar>Call Control toolbar options available now.
    Maybe a bad install or the senstivity of the software, not exactly sure.

  • Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast

    Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
    Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
    It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
    I appreciate any and all input, thankyou.

    I had to edit to reflect its Mavericks 10.9

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

    When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
    I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
    Anything I haven't tried?
    HELP!

    A bit confused by your statement
    bcboarder wrote:
    . I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
    Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
    I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
    A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
    You can try to borrow and  use the Mac Disk Utility ->First Aid ->Repair.
    Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

  • Exit or Badi for controlling the change of user status in notification

    Hi,
    I want to check the current user status of notification while saving the notificaton. If the current user status satisifies particular situation, then the notification should be save else not.
    Is there any user exit or Badi which can be used to control the change of user status in notification.
    Thanks
    SUMIT

    Hi Pushpa,
    Thanks for the reply.
    the problem over here is that the BADi IQS0_STATUS_MAINTAIN only allows to disable the user status.
    the other function module STATUS_READ only fetches the data from JEST.
    whereas my problem is that i want to check on the changed status on the screen(which is not saved also).
    Appreciate your reply on the same.
    Thanks
    SUMIT

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

Maybe you are looking for