CUPS not working, due to wrong udev rules.
Hey everyone,
i got a problem getting my Brother DCP-145C (Printer & Scanner) to work.
I already did a little research and found out that the udev rules aren't working out, i tried to fix it according to this thread
So here are a few outputs, that hopefully help:
Here is the problem, the printer should be in the group lp:
[root@myhost rules.d]# ls -l /dev/bus/usb/
total 0
drwxr-xr-x 2 root root 60 2009-12-08 14:17 001
drwxr-xr-x 2 root root 60 2009-12-08 14:17 002
drwxr-xr-x 2 root root 60 2009-12-08 14:17 003
drwxr-xr-x 2 root root 60 2009-12-08 14:17 004
drwxr-xr-x 2 root root 100 2009-12-08 14:17 005
drwxr-xr-x 2 root root 60 2009-12-08 14:17 006
drwxr-xr-x 2 root root 60 2009-12-08 14:17 007
drwxr-xr-x 2 root root 80 2009-12-08 14:34 008
usblp is blacklisted:
[root@myhost rules.d]# cat /etc/rc.conf |grep usblp
MODULES=(!usblp usbhid)
Here the printer and the udev rules:
[root@myhost rules.d]# lsusb|grep Brother
Bus 008 Device 003: ID 04f9:0206 Brother Industries, Ltd
[root@myhost rules.d]# cat *|grep 0206
ATTR{idVendor}=="04f9", ATTR{idProduct}=="0206", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"
ATTRS{idVendor}=="04b0", ATTRS{idProduct}=="0206", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary", MODE="0660", GROUP="camera"
The first rule is from my self created 10-cups-usb.rules file:
[root@myhost rules.d]# cat 10-cups-usb.rules
#Brother DCP-145C
ATTR{idVendor}=="04f9", ATTR{idProduct}=="0206", MODE:="0664", GROUP:="lp", ENV{libsane_matched}:="yes"
I don't know if its interesting but here the dmesg output if i replug my printer:
[root@myhost rules.d]# dmesg|tail -n 10
usb 8-2: USB disconnect, address 2
usb 8-2: new full speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 9:0:0:0: Direct-Access Brother DCP-145C 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 9:0:0:0: [sdc] Attached SCSI removable disk
Thanks for confirming this issue.
I did find a message on VersionTracker.com which included a link to the uninstaller:
<http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14157>
I uninstalled using the utility and deleted any flash related files/folders manually and reinstalled the beta. This did not help.
I ran the uninstaller again and installed the previous verion (9,0,47,0) and all is well again.
Thanks!
Jim
Similar Messages
-
Application is not working due to memory issue
Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish ShuklaAll of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well. -
After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?
Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
i want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,
-
In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?
I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct. -
Terminate Action in CUP not working
Hi All,
We have configured HR triggers in GRC CUP. The new hire and transfer rule work as expected. However, the terminate rule does not deactivate the records in the backend system. The process log does not have a record for the terminate action.
Any ideas on how to troubleshoot this problem?
Thanks,
VinayaHi Alpesh,
I am sorry for not being clear enough. By deactivate i meants Lock and change account.
We have executed the terminate action in backend but nothing seems to happen in GRC....as there is no record of the action in the process logs.
Any ideas on what could have gone wrong? The HR team has confirmed that the infotypes used in Rule definition are appropriate.
Thanks,
Vinaya -
GX 70 - Mantle not working Due PowerXpress: Disable iGPU / set primary GPU
Hello there,
I am a proud owner of the MSI GX70. Is there a known way to disable the iGPU from the APU?
The APU part is registered from the Catalys Driver as Primary 8650G Graphics Adapter,due the way PowerXpress Works, most games register this iGPU as Primary and only Card present.
Normaly it should work to disable the iGPU or set the Primary Card to dGPU , on systems from HP , this works well.
The Problem is that the Catalyst is not registering the 8970M as present in the System ( and also not BF4 ( even if the 8970 is running on Max the Game registers only the 8650G ) or the Star Swarm Demo ) because of this behaviour.
Therefore the speedpush through Mantle ( measured on a nearly identical HP Notebook ) from around 20 - 40 % are not reachable till a) MSI comes up with a way to set the Primary GPU or at least disabling the iGPU in any way or b) AMD comes up in xx Months with a driver Capable to see the secondary card.
Has anyone seen a solution?Quote from: BlueAlexFPS;100063
Hello WoFNuLL,
I would like to recommend you to set this function at AMD Catalyst Control Center,
choose the switchable graphics and select high performance discrete graphics to use.
Hi BlueAlexFPS: This will not work, as the Graphics Driver registers everytime the APU Part to the Game Engine, even if the Dedicated GPU is already running ( tryed this by giving BF4.exe High Performance and the Windows Calculator also , startet the calc, saw the switch between the GPUs and started BF4 -> BF4 still sees only the 8650G iGPU
@highwind85:
This is what i already knew, this topic was meant to bring some attention to MSI , that an option to disable the iGPU in the Bios or via software would be a solution for this problem ( and other Problems regarding reigsering the Wrong gpu in the system ). The problem was solved on other systems with identical hardware in this way. -
Exit button not working when entering wrong date
how do I get the message not to appear by day Invalid (Frm-50004) in forms
dear Shrikant,
i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
"FRM-50004: Day must be between 1 and last of month."
as i m entering wrong date i want to exit my form but my exit button is not working properly.
The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
i have kept my push buttons mouse and keyboard navigation property to "NO".
then also it is not working tell me if any solution is there. -
Field AWKEY in BKPF not working due to case sensitive
Hi,
I have reference key as cpv8852MLTD2013, but when i enter this in AWKEY field in BKPF it gets converted to upper case as "CPV8852MLTD2013".
Due to this it is not working, and data is not executing..
Please help..
DurgaIf the field doesn't contain the Lower case, then how can it will take the small letter ?
If the tick option is active, then you can use Capital and Small both letters in this field.
If the tick option is not active, then you can use only Capital Letters in this field.
You can check the field SGTXT for the same. You can see the Lower Case is ticked for the field, that because the field can contain the Capital and Small letters both. But the tick option is not ticked for the field AWKEY, so you can't use Capital and Small letter both for the field. -
My Nokia N96-16GB Camera Not Working due to Strip...
Hi To all...
i have nokia n96-16GB, some days ago my strip gone damage, all functions working good but due to strip error LCD does not appears correctly, some time half disply some time buttons not working.
Therefore i changed it's strip. This Strip has dummy Front cam on it. When i Replaced strip, the cell working perfect all buttons and display working perfect. But when i press camera buttons it says "Camera: Feature Not supported" and it's gone hange.
Now what should i do?? i love my Nokia n96-16GB, even i have changed the strip but why this problem occuring. Plz anybody Solve this.
Awaiting your positive Response.
Thankx.Unffortunately we are prohibited from discussing disassembly of devices upon this manufactuer's sponsored forum and suggest looking for a Nokia Care facility whom will use genuine Nokia parts.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process. Should have right-clicked on the phone device and did a manual backup.
But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact. -
Safari will not work due to blocked site
I am trying to use my Safari browser a blocked site keeps showing up...genio.com???
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one. -
ITunes update not working due to Bonjour
I'm trying to install the latest update for iTunes, and I keep getting an error message saying something like "the feature you are trying to use is on a network..." (can't remember the rest) and basically it's asking me to choose another location that bonjour.msi is in. The folder is right, the program is there, and it's still not working. As a result, I can't finish the update, I can't access iTunes from my start menu or any icons (I literally have to right click an mp3, hit open with iTunes, and then have it open from there). My iPod is still syncing, but it's not even recognizing my iPhone because it also gives me an Apple Mobile Device Driver error, which I assume is connected to the Bonjour issue, but maybe it's not. HELP. I have already installed the latest version of Bonjour Print Services like I saw in a recent Bonjour thread, but that did nothing for me AT ALL. I'm getting very frustrated with the entire thing because I haven't deleted a thing or changed anything about my computer, and this update is making me beyond angry.
Me three....what's up with iTunes tonight, is there a server problem? Anyone called Apple???
-
Default azurewebsite continous deployment not working due to multiple solutions
I am using default build template for build and deployment to azure web site. it was working when I had only my website solution to compile. but now I have modified input to build template and added other solution files also to compile, now my deployment
step is not working. build log says
"More than one solution found. Continuous Deployment skipped."
I am using tfvcContinousDeploymentTemplate.12.xaml, in this template how can I have deployment, when I have multiple solutions for build.
Thanks
singhhomeHi singhhome,
Please confirm whether you mean "modified input to build template" as change to use another build process template.
When you use AzureContinuousDeployment.11.xaml, you can upgrade to a newer version of nuget.exe and check that version in with their solution and to see if it's a workaround. Or you can add the referenced assemblies into source control and check in.
There are detailed instructions on the NuGet.org site about the various ways to do package restore.
http://docs.nuget.org/docs/reference/package-restore
http://docs.nuget.org/docs/reference/Package-Restore-with-Team-Build
You can also set logging verbosity to "Diagnostic" as I mentioned above to see the detailed build log if there any issues occurred during the process. Another option is create a separate build definition for each solution to do the contrinuous
build/deployment to Azure website.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
How to get the numerics in search help
hai friends, I have a sel-screen with one text box as date range(from and to). below that the user wants another small text box in which if he goes with F4(search help) and it should contain three numerics (1,2,3) Here 1 = PO date(EKET-EINDT)
-
Design View Not Working Properly
Hi, I save my web site files as .php and I'm using DW CS5. When I switch to Design View all I get are a couple of icons. Why won't it display the page for me?
-
Recurring permissions errors after every reboot
Apologies if this has been covered but I am wondering why Disk Utility/Macintosh HD/Repair Permissions is constantly reporting the following: Permissions differ on "Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html
-
Questions about JAVA/JBOSS on Oracle VM 2.2.1 - Performance
I recently upgraded to VM 2.2.1 on an older 1.86 quad-processor (intel) system (DELL 2950). We have 3 VM's setup. One as an application server running JBOSS 5.1 and Jira and SubVersion. The second is a 10G Oracle Database server and the third is a 11
-
why cant youtube play most videos even after the suggested flash player # 11 has been succefully installed?