Cups out and nfs no go maybe related ?

Hey there,
i am having the devil of a time getting a couple of things to work.
first off is cups. I installed cups and hplip, put hplip and then cups in the DAEMONS array in rc.conf. tried to start them and they failed.
firefox lets me go to localhost:631 but if I try to do anything, it gives me this message
This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection.
also, i cannot seem to get nfs to share a drive. I have four computers in the house, all run a version of linux ( arch and ubuntu ).
i need them all to have permission to share, write to and delete copy everything in a shared nfs folder
here is my hosts.allow
# /etc/hosts.allow
ALL: 192.168.1.1
ALL: 192.168.1.3
ALL: 192.168.1.4
# End of file
and hosts.deny
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
exports
/stuff  192.168.1.0/255.255.255.0(rw,sync)
/ark 192.168.1.1(rw,sync)
and my DAEMONS from rc.conf
DAEMONS=(syslog-ng network portmap nfslock nfsd netfs hplip cups crond alsa)
this is not the computer connected to the internet or my router, thats a different machine.
when i try to mount the drive from the other machine, it tells me permission denied.
are the two issues related ?
thanks for any help

Firewall?

Similar Messages

  • After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has mult

    After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR

    I resolved the issue.
    The problem is indeed a permissions issue with the Adobe Application Support folder.
    First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
    Next launch the Terminal application.
    At the command line, paste the following command line: chflags nohidden ~/Library/
    Go to /Users/youruserid/Library/Application Support/Adobe
    Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
    Problem solved. RR

  • 7110 OMG, CIF and NFS permission woes. I'm tired and I want to go home.

    OK, here's the dealio...
    I have share exported via CIFS and NFS from our 7110 array running 2010.02.09.2.1,1-1.18
    I have AD configured for CIFS Authentication.
    I have a UNIX desktop so I am using SMB authenticate via AD and talk to the CIF share on the array.
    I have the NFS share mounted using vers 3 on Solaris 10.
    Now, the problem..........
    PERMISSIONS!!!
    Here’s what I want to do,
    Create a file or folder on the CIF and preserve the username on NFS.
    Example, I login as myself via AD, bam I’m on the array.
    Create a file.
    Check the ownership of the file on the NFS mount and it’s suddenly become a series of numbers. Of which I assume are taken from my Windows SID. As Solaris can’t relate my SID to a UNIX username I’m left out in the dark.
    So, I then tried to set up some rule based identity mapping so my Windows login would be converted to my UNIX username, no luck still a series of numbers for me listed against my files.
    I could work around this if I could chown but I can’t even do that as it says chown: filename: Not owner
    What gives? How do I keep my username from CIFS to NFS? HELP!!!!

    Did you have any joy with this?
    I have never been able to determine a consistent configuration for NFS/CIFS sharing on a 7310. Ended up opening access to all on the NFS side (v4) and the CIFS just worked out of the box.
    I am using ID Mapping, with IDMU first, then rule based mapping next. The box picks up the correct UID/GID from AD but doesn't always inherit the user & group for the NFS side.
    Chris

  • Intermittent Kernel Panics - maybe related to iTunes? Something else?

    I have been experiencing intermittent kernel panics the past few weeks - the ones where the screen goes grey and you get the message in multiple languages telling you that you have to restart your computer. I have been trying to figure out exactly what is causing them and, thus far, have been unable to come up with a definite pattern. It does seem that I am starting to narrow things down a bit.
    The panics seem to occur when I have a lot of program running simultaneously. I usually have Eudora and Safari running most of the time, and will often fire up Power Point and Word. Then, I may add Excel, Preview, maybe Acrobat or Acrobat reader - I think you get the picture. However, it SEEMS that the culprit in all of this is that if I have had iTunes running, the kernel panics are more likely to occur. However, iTunes does not have to be running at the time of the panic (although I would guess that it has been in over half of the panics I’ve experienced). It just has to have been run recently. I
    I have done a lot of troubleshooting, such as running Apple Hardware Test and other utilities and everything comes up just fine. I have done all the maintenance routines, I am using Apple RAM. I have done a lot of the other voodoo that folks suggest in these cases. I have read these forums and most of the posts relating to kernel panics are not quite what I am experiencing. (I did read about some of the audio issues that folks have been experiencing and I just uninstalled the SRS iWOW plugin from iTunes and will see if that makes a difference.)
    One final thing. Recently, when I get a panic, there is no record of it in any logs that I can find. Therefore, I cannot trace what was happening just before my MacBook Pro went down. I did find one log (I forget which one now) that suggested that before the most recent panic this morning the last thing logged was activity by DefaultFolder. However, that may have just been the last thing I did that was actually logged. I had stepped away from my computer and when I came back the kernel panic screen was showing.
    I am guessing I may need to do a clean reinstall, but before doing that I thought I’d call upon the collective wisdom of the members of these forums. Any ideas or suggestions would be appreciated.
    Bob Q.

    We had a kernel panic last week - iTunes (v.7) was running at the time, so was Mail, but I was building a photo album in iPhoto when it happened. After reboot (took a LONG time to boot up) We repaired permissions and went on as normal. Previously, we had a hard shut down due to a power outage (don't ask: yes of course we have a UPS, but the outage had lasted all day. when the power finally came back on, i powered up the computer and launched Mail. Then the power failed again (grrr!), and apparently, after being out all day, the battery in the UPS didn't even have enough charge for me to have time to quit Mail and power down.)
    Then we began to have spontaneous Sleep syndrome: the computer would just suddenly sleep during activity. After this happened a few times, we reset the PRAM, ran the maintenance scripts using Terminal, but the problem persisted. In fact, once it went beyond sleep and shut itself down.
    This week, we went into the System Errors log and found this:
    kernel[0]: IOSMUPwrController:: OverTemp notification
    kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
    kernel[0]: System Sleep
    kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    kernel[0]: System Wake
    kernel[0]: Wake event 0020
    kernel[0]: USB caused wake event (OHCI)
    kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    mDNSResponder: Repeated transitions for interface en0 (192.168.2.6); delaying packets by 5 seconds
    So at this point, we're thinking that the computer was overheating. We've since cleared some space on the internal HD (we only had about 5% available) and also physical space around the unit. Haven't had the problem in two days now. Never had a second kernel panic either...
    But we have heard that possibly the fan might be failing... we're still under AppleCare warranty and are thinking that we should maybe call Apple to open a trouble ticket just in case.
    your thoughts?
    Message was edited by: kalaluka

  • What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn't decide what she wanted so s

    What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted so she stayed with old phone but this locked me into a new 2 yr contract . Within a wk one of the new iPhones started turning on and of like 10 –15 times a day. Wk 2 it turned off and would not turn on again . It was my sons who was in college at the time so we talked and he took it in to a Verizon store where he was told I need to come in since the account was in my name. He was away from home , Verizon could see on account it was his phone they said it was not abused, they could not even turn it on , they sold me the phone give him another phone maybe even a loaner till he gets another. So now I need to go to store and explain to 3 different people this is my phone and my son has it and I need a new one. what a waste of time after about 2 hrs and talking to different people and yes they said there were notes on his account from other person he had talked to from different store. So I finally walk out with a receipt in hand and being told I would have a new phone in a couple days. As I sat in my vehicle thinking this is stupid I looked at my receipt and noticed it said droid on it so back into Verizon I went. The salesman said that’s what your son has on his account. My son had activated a friends old phone so he has one since VERIZON REFUSED to give him one. Another hr 3 people and yes they can see he had a new iPhone and notes on it from other store. Sometimes sorry just doesn't do it. I was now late for a appointment . Now I walk out and have been told I will get a new iPhone in the mail in about 2 wk Yes 2 wks   again I bought it there just give me a new one and you send old one back. I will also get a new droid that I have to send back because they said they cant cancel it  . In about 3 days I get the Droid and sent it back Verizon mistake and a waste of my time . After waiting over 2 wks and not receiving a new iPhone back to Verizon I went . I am now bitter at Verizon after doing 20 yrs of business with them. 3 people 1 hr later I was told it got delivered to my post office . I got the tracking num called the post office and they say o yes that was the droid. Go back in to Verizon another hr of explaining I walk out being told I will get a new iPhone in a couple of days, We’ll see . Once again I got the phone in your store just give me a new one . Do you realize how much of my time you have wasted ? do you care? O what is Your Policy ? How many Billion did you make last year ? I am Locked into a new 2 yr contract . Why don’t you just release me ? After 20 yrs do you think I will ever renew my contract ?

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

    Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
    I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
    If I connect directly to the computer I have a good connection so it is not my ISP
    I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
    And just so you know . . . I have a smart TV and it is connecting to the net okay!

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I have a 27" imac (intel) my hard drive failed and I installed a new one. This is my first time dealing with this so I am having trouble re-installing the OS. Install disc spits out and ? mark with folder appears what am I missing?

    Like the title says. My 1 TB drive failed and unfortunately my computer isn't covered on the replacement program even though my hard drive is the one they are claiming to replace. So that is not a solution just to get that out of the way. So I replaced the hard drive. What I am having trouble with is re-installing my OS. I have 10.6. When I load it and restart it just spits it out and I get the question mark folder. What am I doing wrong is there a step I'm missing? I did do a back up to my Time Machine before the crash. Can I plug it into it and reload format? I'm new to this so any help would be appreciated.
    Thanks!

    Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
    If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

  • TS1398 After the 6.0.1. update on my iPhone 4s the option for wifi has greyed out and cannot be selected. What can I do to restore wifi?

    I have held off updated my iPhone 4s with the 6.0.1 but having problems connecting to wifi I thought maybe being out of date was the problem.
    Having done the update the wifi option is now greyed out and cannot be selected at all.  I have rebooted, forgotten networks and turned on and off so many times.  There is nothing wrong with the wifi at home as other devices connect no problem.  What can I do?

    I'll repeat the Apple support pages linked in the previous post:
    http://support.apple.com/kb/TS1559
    Go through the step outlines there starting at the top and work down until you've solved the problem.

  • In the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

    in the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

    cc2014,
    Have you selected an image?
    Unless a good explanation appears, you may start onthe list below.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

    I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

    Hey there byambar,
    Welcome to Apple Support Communities.
    It sounds like you’re describing two issues, the first issue is related to the Zoom accessibility feature and the second issue is related to the device being disabled.
    Take a look at the article linked below to learn more about Zoom and the other accessibility features on your iPhone 5.
    Use Accessibility features in iOS - Apple Support
    This article will help you resolve the issue with your iPhone being disabled.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Take care,
    -Jason

  • HT4314 iPhone 5c iOS 8.0.2 Game Center randomly logged me out and asked for a nickname as if I did not have an account. How do I get my account back?

    I updated my iPhone to iOS 8 then added the 8.0.2 update early last week.  On 10/3/14, I used an app that saves through Game Center with no problems (and had not been logged out of Game Center at any time since the update), then a few hours later when I tried to go back in, Game Center popped up and asked for my password.  I put in my password, then Game Center prompted me for a nickname.  When I entered my nickname, it told me it was associated with another account.  I only have one Apple ID and the account the nickname is associated with is my own.  After going out and back in and restarting the phone, I finally entered a new nickname thinking maybe it was being required as part of the update but then it cleared all of my Game Center information.  Is there a way I can get back to my original nickname and Game Center progress?  Thank you in advance for your help as I am not very tech savvy.

    Even easier than what I wrote originally.    Just do a RESET ALL SETTINGS .  I was originally only trying the "reset network settings" but didn't try reset ALL settings.   This has helped 5 of my friends regain their Bluetooth connectivity with a variety of autos.   But remember two things: 1) back up data on your phone before trying this and 2) don't forget to delete the bluetooth original pairing from your car.

  • I have a new email and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address

    i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

  • HT1414 I have tried countless times to restore my IPod Touch and just when it is about completed I get an error message that I have timed out and to try again. Help! ITunes shows that software is updated but I still have picture of USB and ITuneon screen

    ITunes says that the IPod software is updated but my IPod shows a picture of a USB Cord and the ITunes circle.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
      Last, try restoring on another computer

  • All is set up ok but when I view a home movie the apple tv reverts to the menu at random times, sometimes every 30 secs or so, sometimes plays for mins before cutting out and then i have to enter menu, go to movies and select the movie then resume play bu

    Whwn viewing home movies the movie cuts out back to the general menu at random, forcing me to enter menu again, reselect the movie and hit resume button.
    this happens everytime I try to play a movie, maybe after 1 min of play then again after 3 mins, next time it might play for 6 mins then cut out and so on. The macbook pro is not reverting to sleep mode or closing down and the wifi signal is strong. So is the apple tv an expensive load of junk or what?

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Try:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Maybe you are looking for

  • Tab canvas after content canvas impossible?

    I am still having problems with tab canvases that come after content canvases in Designer 6i. I have changed the QMSO$BLOCK.QMS$BLOCK_INFO VISIBLE property to YES and this allowed me to generate the form, but now I have the little QMS$BLOCK_INFO item

  • IWeb 3.0.2

    I am trying to upload a change in my site to .mac and it says there is no internet connection. Very strange as can download mails, view pages etc. etc. etc. What can I be doing wrong?

  • Bookmarks and bookmark/hyperlink markers

    I was working in story editor on a book chapter today and realized that my text was peppered with the nonprinting symbol for bookmarks or hyperlinks, even though I've added none to the document (see image). The text was placed from a Word document. S

  • Export to Insert (clipboard) - Bad Data / Unable to use

    I have been using SQL Developer 1.1.0 at work and recently was updated to the latest (2.1.0.63.73). The problem I have is with the export, to an insert, giving me the wrong formatting and an unusable statement. My steps for exporting... Right click r

  • HT4890 icloud on PC

    I am trying to set up icloud on my PC. Says I need an active add-in in my outlook 2010, but I am not seeing it.  Think I installed but not working?? Thoughts our ideas.  I have iphone, ipad 2 and HP laptop.  My office computer is a desktop HP, one of