Cups software possible issue with headphones

Im not even sure how to word this correctly, but I have a user who uses Bose headphones to listen to music online. This user also uses the Cups software to take calls from the 7942 IP Phone. What happens is when the user takes a call it will stop the music as it should, but when the call is over it doesnt go back to the music. Is there a setting in Call Manager or the software to check? Why wouldn't it go back to regular functions on the computer through the headphones?

I don't think On Screen Dispay is designed for W8. I installed it but had to do with Compatibility settings but did not see a battery drain.
The intel management I disabled in BIOS and never install since I don't have a subscription to the service.
Glad you solved the issue.

Similar Messages

What's possible issue with original Airport?

Hi,
I recently just purchased a used Powerbook G4 867 512M and installed an original airport card. The signal strength indicator seems to flicker in and out from no strength to highest but mainly resting at the "second" bar strength. This laptop is sitting next to a G4 tower which is getting full strength. Is there a possible issue with my laptops connectivity? Should I re-seat the airport card? What could be the issue?
Thanx in advance.

Hi,
Duane. Althoughity, I didn't verify whether the card had any physical connectivity issues, I don't think that is the problem. I made the simple move in location and that seem to have change the "bar" strength. I guess where I was was not a good area for network connectivity. Thanks for possible solutions and causes.

Possible Issues with Duplicate Training Database?

Hello everyone!
First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
Thanks in advance for any guidance here!

Thank you very much John!
We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
I also don't think temporary table space would put much load on storage either, at least in the long run.
RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
I do wish I had the time to read up on this more now, and I will as soon as I have the time.
I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
Thanks for the advice

Solved IOS 6 issue with headphone remote

Upgraded my Iphone 4S to IOS 6 and my Klipsch headphone remot would not work. Volume buttons worked, and the center button would start playing music, but it would not stop or pause the songs. I tried my original Apple earbugs with the remote and did not have any problems. The I used the Klipsch again, and now they work great.
Sounds strange, but that is what happened.

Hi All,
I was facing all sorts of issues with my earphone controls.
This solved my problem.
Double click home button. (press twice).This will show you all the apps that you have currently open.
Long click on the 1st app in the list [about 3 seconds]. This will make the icons wiggle and show a red minus sign on the left hand top corner.
Scroll [right] to see your music app (if you can't see it already).
Press the red minus sign. This will completely close the music app.
Restart your music app and things should be back to normal. [I also would close all other app in the same fashion, just in case, cause things like youtube apps use the controls on your earphones as well. ]
In short: - kill, kill-em-all and restart your music app.

Joint Stereo Balance Issues with Headphones iPod iPad iTunes 10.5.0.142

This is a cross posting.
I'm running iTunes 10.5.0.142 on windows vista SP2. I have an old nano (2nd gen) and an iPad (1st gen).
Most of the files in my library are MP3 encoded using iTunes with default joint-stereo settings.
All of my library seems to want play through the Left stereo channel whenever I have headphones plugged in, either on my laptop, on my ipad, or ipod. Same thing. Doesn't matter what set of headphones (and YES I have switched the phones in my ears, so I'm not going deaf). I've cleaned my ear buds.
I've reencoded some of the files to AAC on iTunes Plus - the result is the same. The thing is that all of the settings indicate stereo in some form. NONE are mono. I can hear the track really really faintly on the right channel, but it's constantly as if I'm going deaf in one ear, and I'm not.
The REALLY strange things are this - when played out of my laptop speakers, there are no issues with balance. Neither are there issues when I play through Airplay to an Airport Express set up.
I've gone through my files, and it doesn't matter which ones. This problem occured before, but I think it cleared up quickly with an iTunes update at somepoint.
IT is RIDICULOUS. I do not have this issue with any other audio on my laptop, and it only started when I updated to 10.5.0.142. I haven't actually changed anything in the library other than that.
Please let me know if something is going on or what I'm missing here.

I noticed this problem first on my Windows 7x64 i3 laptop... I'd rather it not happen. Knowing how helpful Apple has been in the past at actually solving Windows problems. You might consider uninstalling and just syncing to iCloud unless you have a lot of music. As for me, I'm uninstalling it again on my laptop.

Bootcamp Issue with headphones

Hey guys I recently reformmated my Windows Bootcamp Partition, and everything was fine at first until I had an issue with my headphones.
Sound sounds very muffled and underwater like. Its definitely not the headphones because they work with my ipod and I tried a different headset and those still have that muffled effect. Its not the jack because it works just fine in OSX. I reformatted again and the problem went away, but it just came back a few days later. I tried reinstalling the latest drivers from Bootcamp from the apple website, but alas theres still a problem.
Does anyone know what to do? Thanks in advance.

Keiths-MacBook-Pro:~ $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                250.0 GB   disk0s4
Keiths-MacBook-Pro:~ $ diskutil cs list
No CoreStorage logical volume groups found
Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 486812704      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
487222344    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
488491880       1176
488493056 488280064      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header

Possible Issue with Latest Office 2001 Update

In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
Phil

Apparently cannot edit the above. Title should have Office 2011, not Office 2001
Phil

Possible issue with DFS and CSC error 80070035

I have a handful of users who have a strange, recurring issue with Offline Files and DFS in Win7 SP1 x64.
We have a DFS root \\domain.local\DFS. Server ukln1fs1 is a root replica, running a fully patched instance of Server 2012 R2. dfsnamespace is a DNS alias of ukln1fs1, and the SPNs for host/dfsnamespace<.domain.local>
and cifs/dfsnamespace<.domain.local> are registered with that server.
Clients have the Documents folder redirected by GPO to
\\dfsnamespace\DFS\-teamfolder-\-username-\docs and redirection works fine.
Sometimes when clients are disconnected from the network and then reconnect, or when they start up disconnected from the network and then connect, they are unable to connect to
\\dfsnamespace\dfs. They get error 80070035. Clients can connect to
\\dfsnamespace fine and to the individual shared within the DFS structure. This affects all users on the computer once it has begun occurring, and the only resolution is to restart the computer whilst connected to the domain.
Kerberos is using TCP (MaxPacketSize 0)
LanManServer & LanManWorkstation signing requirements match (EnableSecuritySignature 1, RequireSecuritySignature 0)
Have used FormatDatabase on the CSC service to rebuild the offline files cache.
Latest hotfixes for Win7 file services and offline files components are installed: KB2775511 (enterprise hotfix rollup), all latest hotfixes from KB2820927 (collection of enterprise hotfixes including offline files and folder redirection components), all
latest hotfixes from KB2473205 (file server technology services).
Adapters & bindings order has the SSL VPN adapter at the top followed by the NIC then the wifi adapter. IPv4 is a the higher priority protocol in adapters & bindings.

Please have a look at this blog (DFSN and DFSR-RO interoperability), it may help you somehow.
Regards, Ravikumar P

Jedi Academy 1.01e Multiplayer Freezes iMac - Possible issue with Leopard?

Just migrated everything over from my old iMac G4 17" to the new Intel iMac, Jedi Academy single and multiplayers seem to be freezing my iMac hard. I have downloaded the UB patch (1.01e) from Aspyr, made sure all Apple software was up to date, done a clean install after clearing out all the prefs/.plists for it and it will still lock up.
This occours trying to run Multiplayer, it gets to either 'Awaiting Snapshot' or just joins the server and the system freezes.
I've been working with Aspyr's technical support, initially they could not get the problem to happen in single player but when they tried multiplayer they experienced the same problem of it freezing the computer. They have passed it on to their Dev team as a possible Leopard problem but figured I'd mention this here as well in case other users have this issue.

Cannot say, can you use Real Player until it is solved, or flip for mac?
Ray

Major Sync and software update issue with windows 7 and iphone

Loved my iPhone 3g and love my 4.0! My only concern is syncing and software updates are sporadic.
When I first purchased and sync'd my 3g on my laptop, that I had since 2005 w/XP home 64bit, it would constantly (1 out of 5 times) show phone was disconnected and could not sync. Purchased a desktop, 2009 w/Vista 64bit (same issue mentioned continued) then upgraded to windows 7 64bit (same issue mentioned continued).
Both pc's are authorized and contain the same apps and software. I went through all trouble shooting steps (authorize/deauthorize, phone hard boot, sync w/airplane mode on and/or off, uninstall and or reinstall iTunes, etc...) when both phones would brick after software updates on both pc's.
The last software update 4.0 and most recent 4.2.1 went well on laptop with XP and no longer shows sync issue. The problem continues on the windows 7 and backup has completed successfully 3 times.
Long story short, I have to pray the laptop never dies because iTunes, syncing and software updates on XP works now! The problem with software update, backups and syncing persists on windows 7.
* I was able to apply 4.2.1 software update on XP and then connect to windows 7 to sync and backup successfully. I then disconnected/reconnected iphone to windows 7 and problem happened again, unable to sync phone was disconnected error message.

I've had my new pc for over a year, never had any probs syncing my iphone (then a 3G but now the big 4!)
I went to sync updates to Apps and a couple of tunes I had downloaded straight to my phone only to get an error message 'iTunes has stopped working - windows is checking the problem' followed by another messaged telling me there was a problem causing the program not to work correctly. Windows will close the program and notify me if a solution is found'
Well..... I have NO music on my iPhone and every time I try to sync, the same error messages come up and the bloody program shuts down....

Odd microphone issue with headphone jack

Well, I really have two issues involving the headphone jack. One is when I plug the headphone in the volume will occasionally drop to zero and then no longer go up past 0. A power off fixes this.
A second thing I discovered is that sometimes the microphone does not work after plugging in my headphones. I fist noticed this when I was trying to use the speakerphone in my car with the line out through my stereo. I thought that was by design at first. However, I started using voice control and I noticed that the the microphone was not picking up any sound. I could tell this because of the visual waveform display. If I uplug and replug the microphone may start to work.
This happens fairly frequently but enough to make speakerphone use and voice control rather unreliable.

Yes, it has done it through resets. It seems to happen about 1/2 the time I plug the line out in. They tried to tell me at the store that it was my car trying to control the audio. Then I tried to explain it's a simple stero jack plug.
However, if it keeps up I can go to the service center and get an exchange. I'm going to try and report the issue to Nokia first in case it is firmware related.

[SOLVED] Possible issue with makepkg or gnupg 2.1???

I am quite willing to admit that it's possible I'm totally stupid and missing something basic, but I just wanted to see if this makes any sense to you folks. Basically, I'm wondering if there's a regression in makepkg or gpg-agent with GnuPG 2.1.
Step 1: Verify the condition of my personal keyring.
gpg -k | grep Xyne
No results. Good.
Step 2: Verify the condition of pacman's keyring.
sudo pacman-key --list-keys | grep Xyne
No results. Good
Step 3: Use pacman-key (NOT my local GPG keyring) to import Xyne's key and trust it.
sudo pacman-key --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
sudo pacman-key --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
sudo pacman-key -u
Step 4: Try to install pm2ml, signed by Xyne, and use makepkg to verify that yaourt is NOT the problem. This will not work.
yaourt -G pm2ml
cd pm2ml
makepkg -s
==> Verifying source file signatures with gpg...
pm2ml-2014.12.31.tar.xz ... FAILED (unknown public key 1D1F0DC78F173680)
Step 5: Check that I'm not crazy.
sudo gpg --homedir=/etc/pacman.d/gnupg --verify pm2ml-2014.12.31.tar.xz.sig
gpg: WARNING: unsafe permissions on homedir '/etc/pacman.d/gnupg'
gpg: assuming signed data in 'pm2ml-2014.12.31.tar.xz'
gpg: Signature made Tue 30 Dec 2014 05:55:07 PM MST using RSA key ID 8F173680
gpg: Good signature from "Xyne. (key #3) <[email protected]>" [full]
Step 6: Import Xyne's key into my local GnuPG keyring, which I should definitely not have to do:
gpg --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
gpg --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
makepkg -s
Makepkg will work at this point. I have tried this three times, and I can duplicate it 100% of the time.
Is my configuration messed up, or can anybody else duplicate this? I'm wondering if the gpg-agent since GnuPG 2.1 doesn't switch home directories or something and refuses to see a new key even though I just imported it? It seems like the key and the signature are both clearly valid, but I can only get Xyne's package to verify using makepkg if I import his key into my ~/.gnupg keyring.
Again, I could be totally stupid, but I legitimately do think there might be a bigger issue.
Thanks.
Last edited by AdrianCohea (2015-01-31 21:27:30)

Okay, sorry! I didn't know that was intended behavior. That actually makes me a lot happier.
It just didn't seem intuitive to me that I would have to add the developer's public key to my own keyring rather than to pacman's keyring. Almost guides I had previously read previously said I needed to use pacman-key to import the public key.
This thread can be marked as solved, because there is no issue.

Issues with headphones and speakers under Windows

Sound Card: Sound Blaster Li've! Value (Came with an older Gateway PC)
OS: Windows XP Professional with SP2
Problem:
When installing Windows XP on a clean dri've(Fresh Install) I am unable to get sound from my speakers and headphones at the same time. After numerous testing I've determined that this is simply a Windows XP/SB Li've Value issue of some kind.
My temporary fix for this has simply been to switch my headphone and speaker plugs on my sound card with each other and go under the sound properties and turn off Digital output. Not a big deal just annoying having to do this.
I've had this card installed with Windows ME on my system and Windows 2000 and did not have this issue as described above. I simply turned on digital output plugged in both my headphones and speakers to the back of my sound card and had sound from both with no problems what so ever.
I read somewhere that switching the devldr.exe (which I actually tried) that was installed with windows over to the devldr.exe on the XP setup cd. This actually worked for a moment. Once I rebooted I no longer had sound from both my speakers and headphones.
What I'm wondering is if I could switch the devldr.exe with either the Windows ME version (not sure if it uses the file) or with the Windows 2000 version would this fix my problem, or has anyone had this problem and found a solution other then what I have stated?
Thanks

Snagglepus,The forums are intended for the Community to assist each other, rather than Creative directly. We have Technical Support available by phone and e-mail that can assist anyone that wants help from a Creative technician.
Switching files from different OS's wouldn't be supported by Creative (or Microsoft, normally), but if someone from the community has tried this they may be able to advise if it worked for them. Perhaps give it a little more time for people to reply, the forums are new.
You didn't mention what kind of speakers you have connected to the system, this may help anyone that wants to reply to your thread.
Cat

Issues with headphones

I tried plugging my headphones into the audio jack and all I hear is a quiet air-type/static noise. I Googled the problem and didn't come up with any solution that matched my issue. Has anyone else had this problem?

Uninstall the Realtek driver. If you wish, you can then install the generic Realtek driver to utilize the Dobly SRS (which must be reinstalled after you install the generic driver).

Oracle 9i database software upgrade issue with standby (Dataguard) database

All,
I have encountered a problem in upgrading the Oracle software on 2 of our databases in-house. The databases in question here are using Dataguard, so one is set to primary and one is set to standby. The version that they are/were starting at is 9.2.0.7.
I was able to install and complete the 9.2.0.8 and 9.2.0.8 OCT CPU patches on the primary database, however when I moved to working on the standby database, I am got an error when attempting to follow step 6 of the post installation tasks:
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
(Please note that this is my first experience with working with Dataguard, so my methods in updating might have been a bit off-base.)
If I attempt to startup the standby database in MIGRADE mode, I get the following error (which is expected):
ORA-01666: controlfile is for a standby database
If I try to run the catpatch.sql script, even after mounting the database in standby mode, I receive the additional error:
ORA-01219: database not open: queries allowed on fixed tables/views only
My question here is, how do I get the standby database to allow me to finish the software upgrade process, so that both versions of Oracle match on the primary and standby databases? :)
(I did try some research on Metalink, but only found an article detailing how to upgrade your dataguard database from 9i to 10g, which did not look especially helpful in this case...)
Thank you!
-Sabrina

Depending on the kind of Dataguard you currently have, physical or logical, there are two useful metalinks notes:
Upgrading to 10g with a Physical Standby in Place
Doc ID: Note:278521.1
Upgrading to 10g with a Logical Standby in Place
Doc ID: Note:278108.1
~ Madrid
http://hrivera99.blogspot.com/

Cups software possible issue with headphones

Similar Messages

Maybe you are looking for