Currency translation taking more time at first time in the report

Hi All,
Here is an issue regarding the currency translation in the report. when we click on the currency translation from the contaxt menu on the report, its taking more time for the first time to get the selection options. But it is fast from the second time onwards. It will be not user friendly if its takes more time for the first time. Is there any way to fast up the processing time for the first time when i go for the "currency translation" option at report level for the first time.
let me know why it takes more time for the first time when we go for this option at report level.
Thanks,
Jack

Once again from the top.
This is undoubtedly not a database issue.
I doubt you can fix it in the database.
You can, however, spend a lot of hours asking questions and poking around if you are a consultant paid by the hour.
But as long as you are looking for something to do here are some that won't fix the problem but may be worth a few minutes of your time.
WHERE 1 = 1Are you kidding? Drop this nonsense. The Oracle optimizer is not brain dead. If it were my database I would also drop the parallel hint like a bad habit.
/*+ parallel(rp1, 8) */Again the Oracle optimizer is not brain dead. Ask for parallel threads that don't exist and the database will just queue your SQL and let it sit there until sufficient resources become available.

Similar Messages

ADF application taking more time for first time and less from second time

Hi Experts,
We are using ADF 11.1.1.2.
Our application contains 5 jsp pages, 10 - 12 taskflows, and 50 jsff pages.
For the first time in the day if we use the application it is taking more than 60 sec on some actions.
And from the next time onwords it is taking 5 to 6 sec.
Same thing is happening daily.
Can any one tell me why this application is taking more time for first time and less time from second time.
Regards
Gayaz

Hi,
If you don't restart you WLS every day, then you should read about Tuning Application Module Pools and Connection Pools
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0301
And pay attention to the parameter: Maximum Available Size, Minimum Available Size
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0314
And adjust them to suit your needs.

HT3275 Using time machine first time and the estimated time says 25 days. Wow! Am I able to use my Mac when Machine is doing its first backup?

Using time machine first time and the estimated backup time says 25 days. Wow!
Am I able to use my MacBook Pro when Machine is doing its first backup?
I can't be without my computer that long. I would have withdrawal symptoms (very painful).

Something WAS radically wrong, but I don't know what it was. However, using Apple's disk utility, I decided to totally erase the Seagate, which was "pre-formatted" for Mac and PC.
I first saved the Seagate software to my hard drive just in case I needed it later (which I don't),
By the way, the first time I tried Time Machine it stalled after about 3 GB. The second time I got the message saying 25 days backup time. I stopped that backup after receiving your response.
After reformatting (extended - journaled) I made my third attempt. Success!!! It took about 8 hours, but went through without a hitch..
I bought the SeagateI because a momentary power failure messed up my 1 TB LaCie external, which was divided into 2 partitions. The power glitch completely fouled one partiton and it will not reformat no matter what I try. I did not do a full reformat because I did not want to lose the backup on the good partition. Now that I have a good backup I plan to do a full 1 TB reformat (without partitions) on the LaCie.
Thank you for your response, which really did help me.

How can I get the date and time and display it on the report main page?

Gurus,
How can I get the date and time and display it on the report main page?
Thanks!

Hello,
You can create a Formula Colum returning a date :
function CF_1Formula return Date is
begin
RETURN(SYSDATE);
end;
Put a Field in the Layout having this formula column as source .
Regards

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

IR Aggregation as a first row in the report

Hi,
I am calculating aggregation using actions in the IR, but my requirement i have to display the aggregation result as a first row in the report.
version 4.1
thanks in advance.
regards
Chandran

Hi Jeff,
Thanks for your reply,
as you told i tried that CUBE and ROLL UP but i should display the grand total only not sub totals. and i should hi-light that total row also.
for above requirements i have selected the actions functionality.
regards
Chandran

Conditional formula to supress a section in the first page of the report

hi all,
how to programatically add a conditional formula to supress a section only on the first page of the report.
i am using CR XI R2 RAS server.
thanks in advance
Padmanaban V

Hi Padmanaban,
You can download samples from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples]
Regards,
Shweta

Interface is taking lots of time for first time execution

Hello all,
I have one inbound interface in which i am updating T-code CO01 ,CO15 , MIGO and MB1A respectively
depending upon the condition in the incoming file.
When ever i run this interface for the first time it takes lots of time for execution, but when i run the same interface again with the same file it is taking half time of the first time execution.
I am not able to understand why it is taking lots of time for first execution and after that execution time is redued very much with the same file
Kindly help
Thanks
Sachin Yadav

thank you santhosh for your reply..
as this program is in Production system it it taking 3 to 4 hour to execute.
Previously it was OK but from last 2 to 3 moths it is taking more time.
when i debug the code it is working fine. I din't find any point at which it is taking more time.
I am not aware about buffers and SAP memory. can you plz help
Do you have any idea why this is happening.
Or how can i rectify the problem?
Thanks
Sachin

Why Selection Screen is taking much time, very first time?

Hi Experts,
I hv a Selection Screen-1000 with 15 select options, 2 push buttons, 6 radio buttons, 3 paras. with List Boxes with my_T.Code.
So, When I executed this SS-1000 with my_t.code, its consuming time like,
1 - first time - 58 Sec.
2 - 2nd time - 31 Sec.
3 - 3rd time - 5 Sec.
4-4th time - 5 sec.
So,
1 - Why its happening like this(any buffer concept involved?)? Obviuosly, I hv been asked to get the first time also with in a short time.
thanq.

ThanQ Rich,
OK, anyways, of my curiousity asking that, It shuld all times shuld consume same time for displaying the selection screen! Why its taking differed timings?
In Intialization:
push_name1 = 'A1'
push_name2 = 'A2'
AT SS OUTPUT:
filling list_box1
filling list_box2
filling list_box3
perform modify_screen
So, U mean, I hv to look these things!
ThanQ.

My Iphone 5 doesn't sync most of the time. First time I brought it to Apple Store they replaced the cable. Second time, was there for 4 hours no joke and still does the issue. Today, same thing. What do I do now!? :(

First time I brought it to Apple Store they replaced the cable. Second time, was there for 4 hours no joke and still does the issue. Today, same thing. What do I do now!?

Got it replaced last week. Turns out the dock was defective.

Application takes lot of time for first time..

Hai guys,
we made an application on a 3rd party software for use on a tool which connects to SAP with RFC.
the applicaiton updates ORACLE databse after getting relevant information from SAP.
Now,for information on SAP side we have RFC.
for updates on oracle we write SQL.
the unique problem is..this applicaiton takes lot of time when used the first time..
once the first use is over it takes much lesser time for any subsequent use(by any user)..
I DOUBT THE SQLS(ESP UPDATE) TAKE MUCH TIME THE FIRST TIME.

I DOUBT THE SQLS(ESP UPDATE) TAKE MUCH TIME THE FIRST TIME.
Why don't you trace the call and be sure? Don't guess.
once the first use is over it takes much lesser time for any subsequent use(by any user)..
Because the statement is in the cursor cache - clear the cache each time and the statement will run long every time. Again, trace the call and determine the issue - most likely you need an index or have an improperly coded SELECT statement.

Currency translation with user defined exchange rates in a BEx report

Hi guys,
our business department requests a new functionality in our BW system. They want to simulate a currency translation in a BEX report. But this currency translation should be so flexible, that the user can change the exchange rates directly in the report.
For example: The report should show a list of all our local company revenues. In the first column the plan revenues will be shown in the local currency (each company has its own local currency: USA->USD; Japan->YPN, Great Britain->GBP and so on). This revenues comes from a normal infoprovider, loaded via flat-file.
In the second column the user should be able to enter or change a plan currency rate. The entered exchange rates should be stored in BW for a next use. They won't maintain the rates directly in TCURR, because this rates are only for simulation use !
In the third column the translated Revenues in Euro currency has to be shown under the use of the exchange rates from the second column.
I investigated a lot of time in the SAP help and here in the SDN, but I didn't find any solution to realize this. Is there generally a possibility to make a currency translation with exchange rates out of the TCURR? Would it be an option to use the integrated planning function of BW? Or is this requirement to far away for an simple implementation in SAP BI ?
I hope, someone of you has also fixed a similar problem or has a good inspiration.
Thank you in advance.
Thomas

thanks for the prompt reply!
Unfortunately, exchange rates are not a part of my cube. They are held in different tables, and referenced depending on what kind of exchange rates I need to be looking at (average rates, daily, planning etc.). The only way for me, at the moment, to know which rates have been used is to go to query global view, and look at the type of conversion, and then try to figure things out. Plus there can be a different key date used in the query, which makes things more complicated.
Anyway, it was worth asking
Thanks again.

Server0 is taking more than one hr to start the applications

we are in the meddile of tht sp19 uppgrade for portal server.
when SDM is restarting the J2ee process, all of the them are not coming up
and server0 process is taking lots of lots of time to start the applications.
pls cud any one let me know wht to do
Thank you
Mallesh.

It isn't, something has gone awry. Hold the power button for about 10 seconds to perform a forced shutdown. Then restart as normal. When you turn to the System Preferences, Users and Groups tab you will probably find that the account was deleted. But it may not be. If you chose the option to delete the user's folder, make sure that it is indeed deleted. It will probably be a good idea to start in recovery mode - restart holding the command R key - and use Disk Utility to repair the hard drive, just in case.

How do I get the length of time of a step in the report?

heyy,
I noticed that the time a step needs for termination is listed in the report. But just for few steps. How can I manage this for the other stepts??
Thanks for your help!
Carlos

Hey Heinz,
sure! I send you a picture of my sequence and its report...
Thanks!
Carlos
Attachments:
Sequence.PNG ‏62 KB
Report.PNG ‏34 KB

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

Currency translation taking more time at first time in the report

Similar Messages

Maybe you are looking for