Currency & Unit creation in Cube

Hi,
Could anyone guide me the Steps for using of currency field from start to end in BI 7.0.
Am trying with a small example where keyfields contains a currency or unit infobject.
a) created infoobject with Quantity field as Unit and Price as Currency
b) Created a Cube, with Unit & Currency dimensions
c) Created a Infosource, able to see Unit & Currency fields
d) Created transformations by using cube, able to map fields automatically
e) Am unable to proceed from DTP onwards.
I request you to please provide the steps of currency creation.
-Naveen

Its not a standard datasource.
I created my own Characteristics & KeyFigures Infobjects for practice. In that i added Amount as Currency and Quantity as Unit key figures.
I want to generate a simple report with creating Cube by Currency & Unit fields.
Could you please provide Step by Step for these in BI 7.0.
-Naveen

Similar Messages

  • Cannot add Currency Unit in CUbe

    Hello,
    I am trying to add a currency unit (ZCURR1) which I created to my Unit Dimension in my InfoCube. This unit is created under the 0UNINOTASSIGNED InfoArea. The problem is I dont see any of the units (currency units etc) under the 0UNINOTASSIGNED InfoArea when I wish to drag & drop the same. Do I need to make any changes?
    Interestingly, I see 0CURRENCY already existing in my UNIT dimension of the InfoCube. But when I go to the Transformation Screen, I do not see it. Why is it so?
    POINTS WILL BE AWARDED!!
    Regards,
    SD

    Hai Sebastian,
    If you have created ZCURR1 as an attribute you cannot drag and drop in to the unit dimension.If its been created as navigational attribute you can see under the navigational attribute folder,once the master key charcterstic is dragged in to the dimension.while executing a query you can see ZCURR1 in the attributes folder,irrespective of display or navigational attribute.
    You can see the 0currency in the unit because you must have got a key figure which is a type CURRENCY and which is not fixed currency.

  • Currency/Unit may not be initial

    I have a real-time infocube. All keyfigures in this cube are zero. If I start to plan this cube, I get an error message “Currency/Unit may not be initial”. What is wrong?
    Thanks!

    Are you using IP?  I think you need to specify in the filter what currency / unit you are planning with.
    If using BPS, i would set the unit and currency in the planning level...

  • How to add Currency Unit in InfoCube definition?

    Hello Gurus,
    How do I add a newly created Currency Unit (ex: ZCURR) to the Unit Dimension of my InfoCube?
    I created this Unit in NotAssignedNodes InfoArea, but when I open this InfoArea to drag & drop the Unit, I see a blank InfoArea.
    Pls help.
    POINTS WILL DEF BE AWARDED!!
    Thanks,
    SD

    Hi Sebastian,
    I dont think we can expect a unit to be stored in UNIT fixed dimension unless it comes along with a keyfigure.
    UNIT dimension is to store the unit characteristic, which is present in the cube, becasue we have used a keyfigure which has unit along with it, like Amount or quantity data type key figures.
    When we define a key figure with data type as Quantity, it will ask us to mention either Unit object or a fixed unit. Here we need to mention the unit created by you.
    If we have added any unit characteristic in the char tab of cube defintion, then we have ensure to place them in a custom dimension.
    Hope this is clear.
    Naveen.A

  • Show currency unit in extra column

    Hi Gurus,
    i got a key figure in query with different currency units loaded. After drill down to company i can see different currency units in data fields.
    For example
    Keyfigure
    100 USD
    200 EUR
    400 YTL
    i want to split this key figure.
    What i want is two colums - one with value und one with currency.
    For example
    Keyfigure1
    100 
    200
    400
    Keyfigure2
    USD
    EUR
    YTL
    We have no SPS14 here - otherwise i would enable tabular view in query designer and put characteristic "currency" next to the key figure.
    Any ideas how to reach this?
    Regards,
    Adem

    Hi.
    whats ur exact requirement. I think in BI7 we have solution for this
    in report level its not possible in BW.
    if u want we can do in modelling level for that include one char infoobject in cube in update rules map this object with 0currency,  build one new formula use NODIM function to avoid units, drag that char infoobject into column,
    but its not the perfect solution lets wait for experts answers.
    thanks,
    pavan

  • Adding Currency Unit in InfoCube definition

    Hi Guys,
    I am working in BI 7.0. I created a currency unit ZCURR1 and wish to add this to my InfoCube definition under the Unit dimension. How do I do this as I am unable to locate ZCURR1 anywhere.
    I had also marked some attributes as Navigational Attributes. But I dont see these attributes in Cube definition. How can I see these navigation attributes in the folder "Navigation Attributes" in the cube definition?
    Thanks & points will be given,
    SD

    Hello Sebastian,
    To see the Navigational attributes in the Cube definition, first you need to add the info object which has these navigational attributes in it. Like if you want to see the Material Type which is a navigational attribute of 0MATERIAL, first you have to add 0MATERIAL in the cube and then only you can see it in the Navigational Attr Tab.
    For the Currency key to be displayed in your Units tab, it totally depends upon the key figures you are using in the cube and the system will automatically add them under the Units. Like if it is Standard Price then system will add 0CURRENCY automatically as it is used in the definition of that Key Figure.
    Hope it helps..

  • Currency unit in Report painter

    Hi,
    I met a problem when i maintain a report using report panter. Table FAGLFLEXT is used for the library, and I want to using currency translation function. I use Basic key figure "HSL local currency" and CC_HSL translation local currency for the report. But when i run the report, there is a problem, system tell me that can not find the unit of source currency, so can not translated to target currency. The data of local currency can be displayed.
    i set the format of the local currency column, find that even i click "print the unit", there is no currency unit of the data, so I think there is some problem.
    What is the problem? thank you!

    Hi Amir,
    Thank you for your answer.
    I changed the key figue to "Crcy Transltn TransCrcy (Act.)" as told, and run the report again, but still have problem.
    No valid exchange rate for currency translation from  to USD
    Message no. GR640
    Diagnosis
    The system could not find a valid exchange rate for the currency translation.
    System Response
    The system could not translate into the target currency.
    Procedure
    Check the target currency, the exchange rate date and the exchange rate type.
    I am sure i have maintain the exchange rate type and related rate.
    The setting of "Define Currencies of leading Ledger" is "1 Translation taking transaction currency as a basis".
    I think the problem is that the system cannot find the unit of the currency, so the error massage display as "No valid exchange rate for currency translation from  to USD". If can find the unit of currency, i thought the message should be like "No valid exchange rate for currency translation from EUR to USD".
    If the unit can be found, I think after set the format of the column "print the unit", in the report the unit can be displayed. But in my system, can not display the unit.
    What do you think about this? thanks in advance.

  • Improper display with Currency/Unit in drilldown

    Hi ,
    There are 2 KFs in the query , 2nd KF is one level down (i.e inside the triangle of first KF) .
    KF's are :
    Net value
    Net val in doc currency
    when i drill down on Currency/unit it just drills down by statistics currency (i.e for first KF) it doesn't display other currencies for KF Net val in doc currency .
    But when i bring the 2nd KF to same level as first KF (i.e outside triangle) it works properly .
    Can any one tell me the reason if you had a similar case .
    I think it's some front end problem ?
    Thanks
    Gururaj

    Gururaj,
    I think that it is normal behaviour.
    When you drill down by currency, the 1st KF is drilled down. For example, after drill down you have several rows (columns) with particular statistics currencies.
    The currency shown in each particular row (column) acts like a filter for subordinate nodes.
    If your doc currency doesn't equal to statistics currency, nothing will be shown.
    Best regards,
    Eugene

  • Freight Unit Creation Based on Container Counts

    Dear TM Experts,
    This is an sale order scenario. We have a requirement where customer needs material in either 20 foot or 40 foot or both (20 & 40 foot) containers.
    In SAP ECC while creating sales order business will enter count of 20 foot or 40 foot or both (20 & 40 foot) containers are required to ship the materials in text field.
    How can we use this to determine our freight unit creation for all above 3 scenarios.
    1. complete material is required in 20 foot containers
    2. complete material is required in 40 foot containers
    3. partial material is required in 20 foot and remaining in 40 foot containers
    I do not have any clue how can we meet this requirements.
    can any one please guide me how to meet this requirements.
    1. Can we make use of text field of sale order while defining condition rules to determine the FUBR
    2. I believe text field of sale order do not flow to SAP TM while creating a OBTR. For such situations can i enhance the sale order VA01 to maintain count of 20 foot & 40 foot in ecc while creating a sale order. Using this enhanced field i will enhance SAP ECC & SAP TM Interface structure to capture data from ecc & get to SAP TM system
    3. For above situation do i need to make use of Conditions, Condition Types and Data Access Definitions?
    4. Can we determine a more then FUBR rule for creating the FU's against single OBTR
    Thanks in advance.
    Regards,
    Md.Rafi

    HI,
    I hope your Issue can be solved using the Condition type & Scale settings.
    I.e Maintain your Freight condition type settings to calculate based on Volume (cal type).
    Now if you want different price bands based on volume then you can use the concept of scales.
    Maintain the scale settings Such as Scale basis, scale type etc.
    Hope it helps.
    Regards,

  • Currency unit in return tables

    Hi @ all,
    I'm working with a return table in the update rules to calculate a key figure. Is it possible, that the currency unit of the key figure is not filled automatically? The currency units in source system and target system are the same.
    Thank you for your help!
    Clemens

    Hallo Clemens,
    yes, you're right; are you sure as well to not have more COMP_CODES then 0009 and 0010?
    perhaps it would be wiser to lookup the comp_code-currency from the master data of 0COMP_CODE (0CURRENCY is one of its attributes) in order to avoid having it empty and always hardcode it... This is of course if you want to derive the company code currency...
    hope this helps....
    let us know if you question is answered by closing the thread!
    Olivier.

  • How to display Currency Unit beside value in BEx Report?

    Hi,
    I have 2 separate Amounts in the columns area. Their respective currencies exist as Characteristics in Unit dimension. How do I display the amount along with currency unit beside it?
    As of now my Report looks like....
    Amount 1              Amount 2
    2000                     3000
    I would like to display it as......
    Amount1           CUR                Amount2          CUR
    2000                 EUR                 3000               USD
    Thanks,
    SD
    Edited by: Sebastian D'Souza on Jan 16, 2009 11:40 AM

    Hi Sebastian,
    Yes it can be possible to get the currency unit along with currency in ur report.
    To do this, first of all u need to have the currency unit in ur flat file or else in ur data.
    If u have so, here are the steps to do that.
    1.Double click ur amount info object under 'currency/unit of measure tab' , in the unit/currency field just give as 0currency.
    2.And then activate ur info object.
    3.In Transformations u will find another field '0currency', just map it to the amount field.
    and then do the process as usally loading data to target, and the execute the report.
    u will be able to see currency unit filed also.
    hope this helps u.
    Thanks,
    Sai Chand.

  • Preventing display of currency unit infoobject values in a report

    Hi,
    For a currency type key figure, there is a currency unit infoobject specified. This has INR (Indian Rupees) as its value in the infocube for all the records. When I display the KF in a report, the value of the associated currency unit also gets displayed with it. Is there any way to not get this display of the associated currency unit other than not having any currency unit values in the infocube?

    Hi Jr,
    Thanks, that works.

  • Currency UNIT at row level

    Hi Experts,
    I am using BI 7 and my reports are showing Currency Unit for key figures at the top (in row header only)
    Whereas I want them to be shown with the Key figure Values.
    Current View                             Desired
    plant    Sales                         plant     Sales
              USD                                           
    US01     100                            US01     100 USD                
    US02     50                             US02     50  USD
    Is there any setting where I can achieve the above feature.
    Appreciate your help.
    Best Regards,
    Pratap Sone

    Hi Pratap,
        Please refer the following link for query properties.
    [Currency and Unit Display in Business Explorer|http://help.sap.com/saphelp_nw70/helpdata/en/08/81b98895e911d4b2ca0050da4c74dc/content.htm]
    In that there is a setting mentioned for displaying the unit in the header.
    Please check and I hope this helps.
    Regards.

  • Currency Unit Problem

    Hi all,
    I have a problem to display amount of different currency unit in a single column. i want to display report amount based on account no
    on that i have some canadian account and US account. amount unit for canadian currency is CAD and for US it is USD. user wants to display amount and there unit side by side. the problem is in the subtotal or overall result is comming as * due to CAD and USD. i cant use NDIM function as user wants to display amount and currency unit together.
    can any one suggest how can i solve this issue.
    samit

    one more option would be:
    Create two restricted KeyFigures. One  for USD and one for CAD .So that you could see all USD amounts in one column and all CAD amounts in different column..Hide base keyfigure.Now you will not get * for subtotals and Overall result and amount and currency unit will be displayed together
    Message was edited by: Murali

  • Currency Unit, error while filtering in a report.

    Hello ,
         We have a report with the Currency Unit (1CURDIM) in the rows. After the query execution when we right click and try to "Select a filter value" for the Currency Unit we are getting a error message saying "System error in program CL_RSR and for GET_CHAVL_NC_FROM_SID-01-(see long text)", there is no long text though.
        Please help....
    Thanks.

    Check the below link :
    https://websmp204.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=954852&_NLANG=E

Maybe you are looking for