Current.tdf in Home folder

Since September of 2004 I've had what is labeled as a Unix executable file called Current.tdf in my Home (user) folder. I can't imagine what it might be. Is this file required for OS X, or can it be safely trashed? (It's only 4K in size.)

Well, it may be a residual part of some third party installation;
I searched my OS X 10.4.11 and there is nothing like it inside.
I also did a search with Google and some other Mac forum user
had found a similar file in their user account; it did nothing, and
other replies suggested trashing it. That was two years ago and
the system was Tiger 10.4.
And I did see a reference to a Server update for Panther with
.tdf file parts inside, none with Current mentioned; just these:
standard (quick.tdf, extended.tdf, memory.tdf) in an Apple doc.
The item may be a text file used in web page development;
such as it may be, if it is "tab-delimited data."
Plus, there also is a reference to TDF in digital movie development.
So, maybe there were some items brought in by an application's
installer you really don't need; especially now.
So, it probably is nothing; and certainly not worth trying to open.
Sounds like a nice Trash-able item to me...
Good luck & happy computing!
edited.

Similar Messages

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

When logging on to Windows 7 user gets a second mapped drive to the users home folder

Morning,
I'm working through an issue we've discovered whilst trialing Windows 7. Our environment is setup as follows.
Domain Controllers are Windows Server 2003
Clients are Windows XP and Windows 7
Windows XP and Windows 7 Clients are in seperate OU's
All Windows XP Group Policies apply to Windows XP And Windows 7 clients, Windows 7 policies are then applied to Windows 7 clients after
Windows 7 policies are setup such that any setting defined in a Windows XP Group policy is left unconfigured in the Windows 7 Group policy and only new Windows 7 settings have been set in Windows 7 Group Policies.
We have users home folders mapped in their Account Directory account setting and set to H:\   to connect to
\\domainname\dfs\home\username
In addition we also as a fail safe map the drive via a login script using net use
This has worked fine for years in windows XP, if Active Directory failed to map the drive for any reason then the login script would then map the home drive.
In Windows 7 we have noticed a curious error. We found after a period of a couple of weeks we suddenly started getting a new drive mapped. This was identical to the H:\ drive mapping but was instead under drive Z:\. In other words, the
users home folder is mapped twice on h:\ and z:\. This is not affecting any of the Windows XP users.
I have gone through several logic reasons to ascertain why this has happened with the following findings.
1. Originally we thought the error appeared when we tried out mapping the home drive using the mapped drives functionality new in Windows 7 group policy under preferences > windows settings > drive maps. However, after forcing it to delete the
Z:\ drive using this functionality we only succeeded in removing it with a group policy present to do it. As soon as we removed that group policy the Z:\ drive came back
2. Secondly i thought the reason we would be getting a z:\ drive when we haven't specified it anywhere is because active directory is trying to map to the H:\ Drive but it is already present therefore in Windows 7 it tries to map to a different drive.
Using Windows logic it tries the highest letter first which is unlikely to be in use i.e. z:\. This makes sense because our logon script uses a net use h:\ command to map the drive and i believe by default these are set to perisistent. Therefore
the next time the user logs on H:\ is already mapped so the logic in Active Directory accounts maps the drive to Z:\ instead hence we end up with two mapped home drives. To test this i altered the login script to set the drive maps to
non persistent using persistent:no. The logic here was that when the user logged off the drive would become unmapped so that when Active Directory tried to map the drive it would be able to use H:\. Unfortunately this was not the case and
Z:\ remains.
3. Here is where i resolve the issue but i don't know why and is the bit i need answering. If i go into my account on Active Directory and go to Profile and set the home folder drive letter to another letter i.e. change from H:\ to U:\,
i get prompted to set full control etc and apply. I then set the drive back from U:\ to H:\, again i am prompted for setting full control which i accept.
NOW when i login i no longer receive a Z:\ drive and only get an H:\ drive. YAY, thats what i want, however, i do not understand why this is the case. At first i thought it might be something in the active directory logic when i login to an XP
machine and then login to a windows 7 machine.  IF you bear in mind that although i get a new profile in Windows 7 i still retain the same home folder setting. However, after logging on an XP machine logging off then logging
on a Windows 7 machine i still didn't get the Z:\ drive back.
I have tried creating a new user that ONLY receives our Windows 7 Group Policies and still they receive both an H:\ and a Z:\ drive which rules out the Windows XP policies conflicting with the Windows 7 policies.
Does anyone have any ideas why i would get a second drive mapped to Z:\ logging into Windows 7 on a Windows Server 2003 domain?
Can anyone explain in more detail exactly how the Active Directory functionality works when you specify a connect to Drive letter for a users home folder?
My current workaround is simply to add a net use command to remove the Z:\ drive. I do not want to use Mapped Network drives using the new policy settings in Windows 7 RSAT because we have already found issues with it.
<input id="3daf20bf-4f4d-4a05-86da-2c30c205d580_attachments" type="hidden" />

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

How can I change the name of the HD and Home Folder?

Recently, I had a problem with my computer in which a prohibition sign came up instead of apple logo at start up. I took it to an Apple Store, and they told me that the mistake was in the HD, that they needed to restart the system, so I told them OK, but then it turned out that it wasn't that, it was the cable which connected the HD to the motherboard which was damaged.
They obviously put the name of the HD to another one, and the home folder as well.
So my HD name is "Apple HD" and I want to change it to "Macintosh HD".
My home folder is named "eduardo" and I want to change it to "Eduardo".
I am currently running on OSX 10.9 (Mavericks)
My MBP is a mid 2012, model 9,2.
Thanks! Hope u can help me!

Open the Terminal in the Utilities folder and paste the following at the prompt:
sudo diskutil rename / "Macintosh HD"
Press RETURN. Enter your admin password as prompted. It will not echo to the screen. Press RETURN again.
Diskutil is a disk utility.
Rename is a command.
/ is your main drive.
Note that there is a space before the slash mark and after it.

How do I relocate part of my home folder onto another drive

Hi all
I am about to take delivery of my new Mac Pro, but with only 512MB of startup SSD I don't have room for my whole home folder. I have found plenty of info online about moving my whole home folder onto another drive, but as my external drive is only USB3 I don't want to do that. Instead I want to move my Movies and Pictures folders only and then tell my system to forget about the old location and treat the new location as though it is the home folder just for those two bits.
Sure I can just copy them over and delete the old folder contents, but as soon as I want to do something like save a pic or movie the system defaults to the old empty location.
It's not the end of the world, but if I can fix it, I'd like to. The plan is to sort this on my current Mac Mini before the new toy arrives, so I can easily set up the new one.
All guidance gratefully received.
Regards
Tim

Hello,
You can use some basic unix wizardry to make this happen. What you will be doing is creating a unix "soft link" from your home directory to the actual location of the directories, wherever they may be. This link serves as a "behind-the-scenes redirect" to the actual location to which you link. For example, with the soft link in place, if you
Here's what you do:
Use Finder to move your directories of choice from your home directory to the external HDD. This will require your admin password. Now you should see the folders on your external HDD, and NOT in your home folder. For purposes of this procedure, I will assume your external HDD is named "Storage". Wherever you see "Storage" in the following steps, replace it with the actual name of your external HDD.
Open the Terminal app.
From the command prompt, type the following commands (with a <return> after each) to create a soft link (in this example we are using the "Movies" folder. The "Movies" folder must have been moved in Step 1 to the external HDD):
cd
ln -s /Volumes/Storage/Movies Movies
Repeat the "ln -s" command for each folder that you have moved in Step 1.
Here's what's happening in Step 3:
The "cd" command just ensures that you are in your home directory.
The "ln -s" command creates a link from the external HDD directory, to a directory in your present location (i.e., your home directory)
There is one side affect that I don't know how to get around. Once you do this, the icon that shows up for the "Movies" folder in your home directory will no longer be the fancy system icon for the Movies folder. It will be a vanilla folder icon, with an curved arrow. The curved arrow is a visual indication that the file/folder is link to somewhere else.
Hope this helps.

How do I remove my iWeb pages from the Home folder so I can publish to a new host?

I have moved my MobileMe site to a new service (GoDaddy). The basic transfer went very smoothly. With one tiny hitch: the new URL text.
IWeb places web pages in folders, each folder being a "site." The name of the root folder automatically becomes a "pointer" to the web site -- and part of the URL text.
My current root folder is named DavidChartrand -- me. So..... when I published everything over to GoDaddy the text "DavidChartrand" was attached to my URL.
Instead of seeing www.davidchartrand.com in the URL bar, visitors see: www.davidchartrand.com.com/DavidChartrand
GoDaddy staff says this is simply a quirk in iWeb's design. Fine, but it's annoying. Is there anyway I can keep using iWeb but somehow remove the root folder.....that is, remove my site pages from the root folder and and then re-publish? GoDaddy tech support swears it has many former MobileMe/iWeb users who have done this successfully but offered had no idea how.
David

The way iWeb publishes its websites, in its own folder, the normal URL is http://www.domain_name.com/Site_name/Page_name.html. This is a normal URL for any web host.
If you want to get rid of the site name you will need to publish your website to a folder on your hard drive and upload only the contents of the website folder to your server with a 3rd party FTP client like YummyLite, Transmit or Cyberduck. That will get rid of the site name in the URL.
Of course remove the existing website foldr from the server beforehand.
I believe the folder you publish to on GoDaddy is named public_html. You might try renaming your website to "public_html" and publish to GoDaddy. In theory iWeb will see the website's folder already on the server and publish the website file into it.
It works that way with HostExcellence.com which names the home folder the same as the domain name associated with it. This tutorial explains more about it: iW16 - Using HostExcellence.com with iWeb
OT

Home folder got nested, how to move up a level within Users folder

So I went to change my short name from scott1n to scott using https://discussions.apple.com/docs/DOC-3872 and let's say it didn't go well. At first when I logged into the account it opened up as if it were a new account. I went back and tried to reverse it but that didn't work. Long story short, some how my User folder got nested into a new user folder that I guess I made during this process. I had to use the Advanced Options in the Users & Groups to point the home folder to the nested folder. This now works and I can get to all my data and such but I don't like how it is nested. It is currently: Users/scott/scott1n. Is there a way to move that up one level without copying everything? Once I do that, I assume I can just point to it again like I did before in the User & Groups setting? Thanks!

So I went to change my short name from scott1n to scott using https://discussions.apple.com/docs/DOC-3872 and let's say it didn't go well. At first when I logged into the account it opened up as if it were a new account. I went back and tried to reverse it but that didn't work. Long story short, some how my User folder got nested into a new user folder that I guess I made during this process. I had to use the Advanced Options in the Users & Groups to point the home folder to the nested folder. This now works and I can get to all my data and such but I don't like how it is nested. It is currently: Users/scott/scott1n. Is there a way to move that up one level without copying everything? Once I do that, I assume I can just point to it again like I did before in the User & Groups setting? Thanks!

How do i import my iMovie event library to FCPX when the iMovie library is NOT in the home folder.

my situation:
my MBP is running two drives: a 160gb SSD that has my home folder, OS and all apps, and a 500gb HDD for data and non-essential software.
the HDD used to be my OS and home folder, so I used to run iMovie off it. but after installing the SSD, i am now running Lion off it, and it is now my new home folder.
so my iMovie events are now marooned on my ex-home folder, on what is now my HDD data drive.
I can import iMovie events no problem, as FCPX prompts for where the project files are. but FCPX doesn't prompt for the location of the iMovie events library, so how do i get those old iMovie events in?
i suppose i could copy all the events over to my SSD, then do the import, and then delete them. but that would take up a lot of space, and id rather not be copying and deleting so much data on the SSD.
is there any other way?

It is definitely to your advantage to use the FCP command to Import your iMovie Events all at once. The reason is you will not double up on space. FCP will create a hard lingk to your events so you can access them in FCP without altering the iMovie Event in any way, but without doubling the space.
So there are several ways you could approach this.
1) If you are not using iMovie anymore, you could simply move them to the iMovie Event folder at the top level of either your old drive, or any attached drive that is formatted correctly (Mac OS Extended (journaled). This would likely break any iMovie Projects that you currently have, so it is not recommended if you will continue to use iMovie.
2) If iMovie is still working, you can use iMovie to move the Events to a proper drive. Click VIEW/EVENTS BY DISK in iMovie, and Command-Drag in iMovie to Movie Events to the drive you want while maintaining your project links. This option is probably only available to you if you have set up your old drive as your official Home directory.
3) As long as you set your "old" drive to be your Home Folder in OSX, you can just leave them where they are. OSX lets you have the Home folder on a different drive than your startup drive. This is not ususally recommended, but it is useful when you have an SSD. When I got my current Mac with an SSD, I moved my home folder to the internal hard drive but OSX and my Apps are on the SSD.
To do this, I followed the advice of longtime poster Pondini, who has a great website that walks you through this.
Here is a link.
Link to Pondini's site. http://pondini.org/OSX/Home.html
Link to Pondini's post on your topic. http://pondini.org/OSX/SetupOther.html

Problem syncing Mobile account home folder

I'm trying to get mobile accounts working correctly so that i can support users (including myself) having laptops and iMacs with files all in sync. My initial tests seem to go well, but when I started moving the first user account over (mine) I noticed a number of errors appear. Here is an example of what I'm currently working on (I've trimmed it down to just before the error message):
<hr>
Client ~/Library/Logs/FileSyncAgent/FileSyncAgent-verbose.log:
<Logout> 1:: \[10/06/16 15:22:57.357] <OK> network: MODIFY "Library/Preferences/com.apple.recentitems.plist" {(Priority=1, EXECUTING)}
<Logout> 1:: \[10/06/16 15:22:57.387] <OK> network: MODIFY "Library/Preferences/com.apple.systemuiserver.plist" {(Priority=1, EXECUTING)}
<Logout> 1:: \[10/06/16 15:22:57.417] <OK> network: MODIFY "Library/Preferences/com.apple.Terminal.plist" {(Priority=1, EXECUTING)}
<Logout> 0:: \[10/06/16 15:22:57.435] EXCEPTION: \[data writeToFile:'/Volumes/Users/synctest/.FileSync/PHD-R-wO-0oQq9MqC-synctest.FileS yncHistory' options:0 error:&error] (Cocoa error 512) <-\[SStoreFileOperator_FS writeFileData:] (StoreFileOperator-FS.m:1091): "(Error Domain=NSCocoaErrorDomain Code=512 UserInfo=0x102fdd8c0 "The file “PHD-R-wO-0oQq9MqC-synctest.FileSyncHistory” couldn’t be saved in the folder “.FileSync”." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=35 "The operation couldn’t be completed. Resource temporarily unavailable"))">
<Logout> 0:: \[10/06/16 15:22:57.435] USERINFO: {
<Logout> 0:: \[10/06/16 15:22:57.435] NSFilePath = "/Volumes/Users/synctest/.FileSync/PHD-R-wO-0oQq9MqC-synctest.FileSyncHistory";
<Logout> 0:: \[10/06/16 15:22:57.435] NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=35 \"The operation couldn\U2019t be completed. Resource temporarily unavailable\"";
<Logout> 0:: \[10/06/16 15:22:57.435] }
<Logout> 0:: \[10/06/16 15:22:57.435] BACKTRACE: {
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x1000bc73c
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x1000b9eec
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x100066a00
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x100065fe6
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x1000c8f1a
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x7fff800cbe8d
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x7fff820a3456
<Logout> 0:: \[10/06/16 15:22:57.435] ? | 0x7fff820a3309
<Logout> 0:: \[10/06/16 15:22:57.435] }
<Logout> 1:: \[10/06/16 15:22:57.544] -\[SStore(protected) cleanupTree]: PHD-L-iI.arrVC0G4-synctest: required 0.0 seconds to execute
<Logout> 1:: \[10/06/16 15:22:57.557] Store "PHD-L-iI.arrVC0G4-synctest" finished syncing with root version PHD-L-iI.arrVC0G4-synctest1276714848PHD-R-wO-0oQq9MqC-synctest1276714849\[]
<Logout> 1:: \[10/06/16 15:22:57.558] -\[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:481): unlink('/Users/synctest/.FileSync/store.filesyncstatetree.statetree_dirty')
<Logout> 1:: \[10/06/16 15:22:57.737] Store "PHD-R-wO-0oQq9MqC-synctest" finished syncing with root version PHD-L-iI.arrVC0G4-synctest1276714848PHD-R-wO-0oQq9MqC-synctest1276714849\[]
<Logout> 1:: \[10/06/16 15:22:59.041] Compress/upload of "/Volumes/Users/synctest/.FileSync/Store-FS-PHD-network-home.filesyncstatetree. bz2" took 1.30 seconds
<Logout> 1:: \[10/06/16 15:22:59.041] -\[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:481): unlink('/Volumes/Users/synctest/.FileSync/Store-FS-PHD-network-home.filesyncsta tetree.bz2.statetree_dirty')
<Logout> 1:: \[10/06/16 15:22:59.043] 1-pass sync of "HomeSync_Mirror" took 4.75 seconds
<Logout> 0:: \[10/06/16 15:22:59.374] Finished sync of "HomeSync_Mirror".
1:: \[10/06/16 15:22:59.914] -\[MainObj shutdownAgent]
0:: \[10/06/16 15:22:59.949] EXCEPTION: User Cancelled <_incomingIPC (ipc.m:210): "'((userCanceledErr))' error -128">
0:: \[10/06/16 15:22:59.949] USERINFO: {
0:: \[10/06/16 15:22:59.949] NSLocalizedDescription = "User Cancelled";
0:: \[10/06/16 15:22:59.949] }
0:: \[10/06/16 15:22:59.949] BACKTRACE: {
0:: \[10/06/16 15:22:59.949] ? | 0x10000e2a8
0:: \[10/06/16 15:22:59.949] ? | 0x7fff82d74af1
0:: \[10/06/16 15:22:59.949] ? | 0x7fff82d0f171
0:: \[10/06/16 15:22:59.949] ? | 0x7fff82d0d84f
0:: \[10/06/16 15:22:59.949] ? | 0x1000049d9
0:: \[10/06/16 15:22:59.949] ? | 0x7fff820a3456
0:: \[10/06/16 15:22:59.949] ? | 0x7fff820a3309
0:: \[10/06/16 15:22:59.949] }
1:: \[10/06/16 15:22:59.949] _incomingIPC: caught exception _incomingIPC (ipc.m:210): "'((userCanceledErr))' error -128"
0:: \[10/06/16 15:23:00.669] Bye (PID:2246)
<hr>
Server ~/Library/Logs/FileSync-server/FileSync-server-verbose.log:
1:: \[10/06/16 15:22:54.616] PHD-R-wO-0oQq9MqC-synctest Scanning flagged directory "Library/"
1:: \[10/06/16 15:22:54.625] PHD-R-wO-0oQq9MqC-synctest Scanning flagged directory "Library/Preferences/"
1:: \[10/06/16 15:22:54.644] PHD-R-wO-0oQq9MqC-synctest Scanning flagged directory "Library/Preferences/ByHost/"
1:: \[10/06/16 15:22:54.665] Store "PHD-R-wO-0oQq9MqC-synctest" finished prepareForSync with root version PHD-L-iI.arrVC0G4-synctest1276714845PHD-R-wO-0oQq9MqC-synctest1276714849\[]
1:: \[10/06/16 15:22:54.671] -\[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:481): unlink('/Users/synctest/.FileSync/Store-FS-PHD-network-home.filesyncstatetree.s tatetree_dirty')
1:: \[10/06/16 15:22:56.113] -\[SPeer_FS zip] (Peer-FS.m:361): unlink('/Users/synctest/.FileSync/Store-FS-PHD-network-home.filesyncstatetree')
0:: \[10/06/16 15:22:59.705] EXCEPTION: Unknown error 2002 <-\[SNetworkReachabilityMonitor init] (NetworkReachabilityMonitor.m:72): "(Error Domain=com.apple.SystemConfiguration Code=2002 UserInfo=0x100243d20 "The operation couldn<E2><80><99>t be completed. (com.apple.SystemConfiguration error 2002 - Configuration daemon not (no longer) available)")">
0:: \[10/06/16 15:22:59.705] USERINFO: {
0:: \[10/06/16 15:22:59.705] NSDescription = "Configuration daemon not (no longer) available";
0:: \[10/06/16 15:22:59.705] }
0:: \[10/06/16 15:22:59.705] BACKTRACE: {
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x100014831
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x100014688
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x7fff82ffb535
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x7fff8300963e
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x7fff83001eaa
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x7fff82ffa1ba
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x1000036c3
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x10007f4e0
0:: \[10/06/16 15:22:59.705] ?<C2><A0>|<C2><A0>0x2
0:: \[10/06/16 15:22:59.705] }
0:: \[10/06/16 15:22:59.705] Bye (PID:9460)
<hr>
Now I've not done much with OS X programming, but I've done quite a bit of Unix systems work. The client appears to be getting an EAGAIN error (essentially that the syscall didn't complete, but not that it failed). Ideally, it should try again, and perhaps there is something I can set that will have it do a couple of retry attempts before giving up?
However, the error on the server side is the likely culprit. I don't know what the error message regarding com.apple.SystemConfiguration means, but my googling for hints implies that it is some sort of error connecting over the network. To try and debug that, I had both machines connected to the same switch with firewalls turned off and the error continues. The previous lines imply that it is trying to delete a file that it created from the local disk. What bothers me about that is that in the WGM I set the home directory to be "afp://servername/Users" and it shows that it should be either "afp://servername/Users/synctest" or "/Network/Servers/servername/Users/synctest" but the server is accessing the home folder directly, so why an issue with network reachability?
Can anyone offer any hints as to what I should be looking for? I had hoped that PHDs would solve the whole multiple computer issue, but they don't seem to be working reliably for me. Since I get this issue consistently I'm guessing that there is something misconfigured on my end.

Shawn,
I've done the deletion of those folders a number of times, with no luck.
The most recent attempt to get this to work was:
1. Delete ~/.FileSync and ~/Library/FileSync from the server machine.
2. With a brand-new install of OS X on a laptop, create a local administrator, join the server, then login as the user account that wants a mobile account
3. Look at logs
I still get an exception on the server
0:: \[10/07/31 13:39:47.791\] EXCEPTION: Unknown error 2002 <-\[SNetworkReachabilityMonitor init\] (NetworkReachabilityMonitor.m:72): "(Error Domain=com.apple.SystemConfiguration Code=2002 UserInfo=0x10027adc0 "The operation couldn<E2><80><99>t be completed. (com.apple.SystemConfiguration error 2002 - Configuration daemon not (no longer) available)")">
0:: \[10/07/31 13:39:47.791\] USERINFO: {
0:: \[10/07/31 13:39:47.791\] NSDescription = "Configuration daemon not (no longer) available";
0:: \[10/07/31 13:39:47.791\] }
0:: \[10/07/31 13:39:47.791\] BACKTRACE: {
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x100014831
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x100014688
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x7fff82ffb535
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x7fff8300963e
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x7fff83001eaa
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x7fff82ffa1ba
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x1000036c3
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x10007f4e0
0:: \[10/07/31 13:39:47.791\] ?<C2><A0>|<C2><A0>0x2
0:: \[10/07/31 13:39:47.791\] }
0:: \[10/07/31 13:39:47.792\] Bye (PID:38660)
as well as the corresponding error on the client.
I'm quite frustrated with the whole situation at this point. I'm sure some folks have gotten it to work, but since it has exceptions like this silently, it slowly corrupts the data in an account. I still want to get it to work, but am skeptical that it will.
Message was edited by: Benjamin Kuperman

Time machine no longer backs up changes to files in home folder.

My Time Machine seems to be in some sort of weird state where it has stopped backing up any files/folders in my home (~/) folder or below.
This is obviously a big issue since those are the files most needing to be backed up.
It does catch changes to the /Applications folder, the /Developer folder, and the /usr folder, for some examples.
A typical backup where it misses a lot of changes in my home folder is as follows:
Starting standard backup Backing up to: /Volumes/My Backup Disk/Backups.backupdb No pre-backup thinning needed: 1.22 GB requested (including padding), 253.01 GB available Copied 20 files (157 bytes) from volume . Starting post-backup thinning Deleted backup /Volumes/My Backup Disk/Backups.backupdb/My Computer Name /2009-09-11-185523: 253.01 GB now available Deleted backup /Volumes/My Backup Disk/Backups.backupdb/My Computer Name /2009-09-07-124935: 253.05 GB now available Deleted backup /Volumes/My Backup Disk/Backups.backupdb/My Computer Name /2009-10-03-205432: 253.05 GB now available Deleted backup /Volumes/My Backup Disk/Backups.backupdb/My Computer Name /2009-10-03-205215: 253.05 GB now available Deleted backup /Volumes/My Backup Disk/Backups.backupdb/My Computer Name /2009-10-03-204044: 253.05 GB now available Post-back up thinning complete: 5 expired backups removed Backup completed successfully.
And looking at it in TimeTracker it just shows a lot of 0 byte backups, with the occasional backup with only changes to the above-mentioned folders visible.
How can I reset Time Machine and get it back on track?
I'd like to preserve the current backups on it if possible.

Are you running File Vault?
Besides your TM disk, what's shown in the +Do not back up+ box in TM Preferences > Options?
If nothing there would prevent your home folder from being backed-up, try a "full reset" per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.

Home folder do not appear in the finder menu - How can I get it back?

Keywords:
Mac OS X 10.4.11
FileVault: On
System: Restarted
Home folder: still somewhere in the hard drive but not yet in my account
Initial bad manipulation: home folder > get info > ownership & permissions > you can > No Access
<and> Owner > No Acces
Hello all,
Here is my problem:
Basically, I do not have the home folder in my account when I log in.
Hopefully I remember well what have led to this consequence.
To begin, in the finder menu for the home folder I opened the get info pop-up. Then, under "Ownership & Permissions" I have replaced "Read & Write" by "No Access" both in "you can" and under "Details - Owner".
Per consequence, I couldn't read a document in this folder. Hence, I've tried to to go backward and change the "No Access" to "Read & Write" but it couldn't work.
Then, I restarted the session - but because I had filevault turned on - it screwed.
Then, when I logged in back I got this message:
"The home folder for user "XX" is not located in the usual place or cannot be accessed.
The home or users folder may have been moved or deleted. If the home folder is located or the network, he server may be unavailable temporarily. If you continue to have problems, see your administrator."
Do anyone have already encountered a similar problem?
Thanks a lot,
/

HFG,
One more thing, from this other admin account (good one) I went in terminal and >I observed that the folder that I'm having trouble with does not have the "d" letter.
Basically, it's written:
"-rwxr-xr-x 1 bobip bouba 23701154564 Nov 12 15:31 lol.sparseimage"
What you think? Souldn't be coded as "d_rwx...
Remember what I wrote earlier:
A FileVault account instead puts all of its data into an encrypted disk image - in fact an encrypted sparseimage. If FileVault is enabled, the home folder for that account no longer directly contains the Documents, Pictures, and other data subfolders - all that the home folder really contains is a single file named username.sparseimage. When you log in to the FileVault account and give your password, this disk image mounts and you can access your files.
That "lol.sparseimage" does contain all your data, but it is a file and not a folder, which is why its permissions start with a "-" and not a "d". It is a "disk image file," very similar to the .dmg files that you download from the internet. When a disk image file is opened it will mount a "virtual" disk volume, which behaves very much like a real external disk volume.
Let's call the shortname of your FileVault account "fv" as Robert did. So as I wrote earlier, when you are logged out, your file structure is going to look like:
HD>Users>fv>fv.sparseimage
When you log in, the name of the lol folder is changed to .fv, with the lol.sparseimage file still inside. The leading period hides it from finder. But more importantly, a "virtual disk" named "fv" mounts and opens, which contains all your stuff. The "fv" disk icon is hidden from Finder and doesn't show on the desktop, but it is there.
The mounted disk volume "fv" has access permissions just as a file or folder does, and looking back at what you did, *I think you changed the permissions on that mounted volume*, and not on the sparseimage file that holds it - you would not have seen the sparseimage file from Finder. If you did this then the permissions for both the HD>Users>fv folder and also for the sparseimage file were probably OK all along. I'm not sure what you've now done to them, which is why I advised backing up before doing anything.
So to sum up - there are three different entities that need to have the proper permission structure for the FileVault account to work properly:
1. The folder "fv" in /Users (assuming you are logged out. If logged in it would be .fv)
2. The *sparseimage file* "fv.sparseimage", which is inside that fv folder.
3. The *disk volume* 'fv" that mounts when the fv sparseimage file is opened and the correct FileVault password is given.
I tried creating a test filevault account to check these permissions, and you could try to reproduce what I found. My suggestion in trying to fix things is to do it from Finder, not from Terminal.
I would
1) Log out of the FileVault account,
2) From the other admin account, [enable the root user (Tiger)|http://support.apple.com/kb/HT1528?viewlocale=en_US], and then log in as root.
Then from the root account:
1) Do a Get Info on the folder /Users> fv. Set the owner to fv, with Read only access, set Group to fv with "No Acess" and set Others to "No Access.' Do not click Apply to enclosed items.
2) Do a Get Info on the file fv.sparseimage. Set the owner to fv, with Read and Write access, set Group to fv with No Access, and set Others to "No Access.' Do not click Apply to enclosed items.
3. Double-click the fv.sparseimage file (and cross your fingers!). When asked for a password, give the password from the FileVault account, not your current root password. Look on the Desktop for a new "fv" disk icon.
(Your stuff is in there - if you have ANY type of backup storage, even a thumb drive, you could double-click the fv disk icon and copy the most valuable files somewhere else)
Do a Get Info on the fv disk icon, and set the owner to "unknown" with Read and Write Access, the Group to "unknown" with No Access, and Others to No Access. Most importantly, *check the box for "Ignore ownership on this volume"*. Do not click Apply to enclosed items.
So again, the three Get Infos (as seen from the root account) on my fv folder, my fv.sparseimage file, and my fv mounted volumes look like this:
!http://i34.tinypic.com/krf4h.jpg!
The important permissions are those under "Details". Ignore the part that says "*You have*: No Access." ( You are root, and you actually do have access)
If all seems well, then right-click >eject the mounted fv disk icon on the desktop, log out of root, and try logging back into your Filevault account.

Transferring home folder from Tiger 4.11 into a MacBook Pro w/ Leopard

I just got word that my PB Aluminum 1.67 that was to be repaired via Apple is now
going to be upgraded to a Apple MacBook Pro
First of I'm (happily) shocked by this offer, and now I begin a new realm into intel technology
MacBook Pro, and now... Leopard! Which I didn't want to install on my Aluminum PB I went only
as far as Tiger 4.11.
My inquiry is on transferring my back up home folder from the Aluminum Tiger 4.11 to the MacBook
Pro using Leopard.
Is that at all possible so I can restore my passwords, etc..into Leopard.
I also have PhotoShop 6 and Microsoft X software, would this be a problem installing or using
in the MacBook Pro?
Just concern about software compatibility with this upgrade.
appreciate feedback.. Aimee

Check with the third-party software vendor to find out if there are any compatibility issues or if you will need to upgrade. Older software may be PPC-only. They will run on an Intel Mac through the Rosetta emulator, but upgrading to a Universal Binary version would be the better course of action.
See:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 3/12/2008
Generally, there should not be any migrating problems between the Intel versions of Tiger and Leopard other than third-party software may require upgrading for compatibility.

Changing the name of home folder

When I set up my machine, I set up the name of my home folder without knowing some of the ramifications of using it. I reviewed the steps in http://www.macworld.com/article/132693/2008/03/changeshortusername.html which seemed reasonably straight forward.
I created another user called limited, and logged out of my administrators account, and into the newly created "limited" account.
All of the steps, up to step 10, went smoothly - modified the short name, and Home directory to the desired new name.
Step 10 required changing the folder name using the following sudo command syntax:
sudo mv /Users/oldusername /Users/newusername
I received the following error after I entered the password:
"limited is not in the sudoers file."
The only thing I could think of was that the account I created, "limited", was not set up with admin rights - so I went in and selected the "Allow user to administer this computer" checkbox for this account. However, a warning saying the change won't take affect until I logout and back in. I'm reluctant to do this, in case something happens where the Mac requires shutting down before all steps have been completed. I'm thinking of changing the short name and home directory settings (in the Account Preferences) back so they agree with the home folder name, and then redo the process once I know the "sudo" command will work. *Does this seem like a reasonable precaution?* I want to avoid having half the job done in case something happens and the Mac has to be restarted.
At this point, I don't know if my assumption is correct about the failure to execute the sudo command. Will adding the Admin rights to the account "limited" insert "limited" into the sudoers file? If not, what do I need to do to resolve that problem.
I've included the steps below:
============================================
1. If Automatic Login is enabled (in Accounts preferences) for the account you’re modifying, disable it. Similarly, if File Vault is enabled (in Security preferences), disable it. You can re-enable these features, if desired, after completing the procedure.
2. Log in as a different user than the one you want to modify; make sure the account you want to modify is not logged in.
3. Open the Accounts pane of System Preferences.
4. If the lock icon in the lower-left of the Accounts window is “locked,” click on it and provide an administrative username and password; this allows you to make changes.
5. In the list of accounts on the left, right-click (or Control-click) on the name of the account you want to modify; choose Advanced Options from the resulting menu.
6. In the Advanced Options screen, delete your current short username in the Short Name field, and then type in your desired new short username.
7. In the Home Directory field, change /Users/oldusername to /Users/newusername, where oldusername is your original short username and newusername is your new short username. Make note of the original and new paths.
8. Click on OK and close System Preferences.
9. Open Terminal (in /Applications/Utilities).
10. Type the following command, all on one line, and then press Return; when prompted, provide the password of the admin account you’re currently using, and then press Return again:
sudo mv /Users/oldusername /Users/newusername
(These are the original and new Home Directory paths from Step 7; oldusername is your original short username and newusername is your new short username.) This step renames your home folder in the Finder.
11. Restart your Mac.

NibblesNBits wrote:
When I set up my machine, I set up the name of my home folder without knowing some of the ramifications of using it. I reviewed the steps in http://www.macworld.com/article/132693/2008/03/changeshortusername.html which seemed reasonably straight forward.
I created another user called limited, and logged out of my administrators account, and into the newly created "limited" account.
All of the steps, up to step 10, went smoothly - modified the short name, and Home directory to the desired new name.
Step 10 required changing the folder name using the following sudo command syntax:
sudo mv /Users/oldusername /Users/newusername
I received the following error after I entered the password:
"limited is not in the sudoers file."
The only thing I could think of was that the account I created, "limited", was not set up with admin rights - so I went in and selected the "Allow user to administer this computer" checkbox for this account. However, a warning saying the change won't take affect until I logout and back in. I'm reluctant to do this, in case something happens where the Mac requires shutting down before all steps have been completed.
nothing will happen. just log out/in and rerun the command. an account has to be admin to use sudo.
Message was edited by: V.K.

Applications missing in Home folder?

Hi,
I was trying to do a back-up of my home/users folder which should essentially contain everything on my hard drive, when I noticed that in my home folder, the applications folder is empty. How is the best way to put all my my applications back in there? I tried drag and drop, but it looked like it was going to copy them all. Any help would be much appreciated,
Regards,

Hi Alex,
Applications aren't normally kept in your home folder. If they were, they would be available only to you. This is designed as a multi-user system, even if you have only your one account on it.
Applications are normally stored in the Applications folder at the top of the disk hierarchy. Click your hard disk icon twice. You'll see Applications, Library and System (the operating system), and Users -- all accounts, yours and any others. This is where your data goes, along with any private applications.
You may have an Applications (OS9) folder, Maybe a System (OS9) folder, and possibly a few other things at that top level.
The optimum backup strategy is to "clone" your internal HD to the external drive. Clone as in "copy everything" and also "make the external drive bootable." That gives you a backup not only of the data but also the settings and current state of your computer and the ability to use the computer from the external drive even if the internal drive fails.
Carbon Copy Cloner and SuperDuper are two great utilities that can clone your internal drive and do "incremental" backups (only changed files) later.
Good luck,
John

Manually created folders in the Home folder won't be hidden to other computer users

First, I noticed this in Mountain Lion, so it's not Mavericks to be considered the responsible.
All Mac users (ok, except guests and limited) come with a home folder, which contains some default created subfolders that are not accessible by other users on the same Mac. That said, I created a couple of folders under my home folder, in order to store some personal data there: I believed that every newly created folder in there would automatically become unaccessible to other users as well as the default ones. Actually not: after a co-worker of mine logged in, navigating to my user's home folder, I spotted the prohibition sign at every system created folder, but not at the folders I manually created! In fact they were accessible, with full rights to read and write. I manually set their permissions and now I hope noone may see those folders content.
Is it a common behaviour? I expected different.
Thanks

hi there,
yes it is common, since any newly created folder has the default set of permissions, which in current OSX versions and most other unixoid systems is "755" or "rwx r-x r-x".
If you want to change this to the more private setting ("700" or "rwx --- ---"), as used by the subfolders within your home directory in OSX, you need to use the terminal command "chmod" or the Info-Panel within the Finder to alter the permissions manually.
hope this helps,
Chris

Current.tdf in Home folder

Similar Messages

Maybe you are looking for