Curser and screen goes to sleep in the middle of working. Goes to the light gray where I have to click on the screen to make it active again.

I'll be typing away and all of a sudden it is like someone grabbed the curser and clicked on another window. The screen turnes light gray (not active window). Have to click on the screen to make it active again. Anyone know what to call this and how to fix it. Thanks in advance!!

Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

Similar Messages

  • Instead of hitting enter to go to my desired web page I have to click on the green arrow. Why is that?

    For example: If I type "yahoo.com" in the address bar at the top of my page, instead of just hitting enter I have to click on the green arrow to go to that page. Before I would only have to press enter and now it wont do anything until I click the green arrow. I tried to uninstall firefox and reinstall but it still does it.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

    While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • I have wifi in my home and it has always worked fine. Then I went to Ireland and used the iPad there.  Since I have been home, it won't work in the house. I took it to another location where I have logged in before and it worked perfectly.  Any ideas?

    I have wi-fi in my home and it has always worked fine with my iPad.  Then I went to Ireland and used the iPad there.  Since I have been home, it won't work in my house.  I can't get my wi-fi connecton.  I took it to anothe location where I have logged in in the past, and it worked perfectly.  Any ideas as to why I can't get a connection at home?
    Thank you.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    jeanfromisle-arné wrote:
    I'm new to MacBook Pro.
    My system is Mac OS X v.10.6.8.
    I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
    Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
    Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
    Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
    where do I find the exact version (in french)
    For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

  • I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • I am using Office for MAC 2008, when I switch to other applications on my MAC and then go back to Office window it never brings me back to the window I was working on.  I have to click on the Window tab, but my window is ticked but not appearing. Why?

    I am using Office for MAC 2008, when I switch to other applications on my MAC, to copy and paste something for instance and then go back to Office window it never brings me back to the window/worksheet I was working on.  I have to click on the Window tab in excell for instance, but my window is ticked but not appearing. I then have to click on one of the other open files and then click back to the sheet I was working on for it to appear.  Can any one tell me why?

    Does that happen only on web pages that are running a Flash presentation? <br />
    When Flash "steals focus" from Firefox, you need to click outside the Flash presentation in the browser window, to regain focus in Firefox. A major problem arises when the Flash presentation is in the entire browser window, though. The Firefox developers are working on fixing that in Firefox, but it doesn't look like a fix is going to make it into Firefox 4.0, though.

  • On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

    On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

    How to open an existing Pages document?
    Click Pages icon in the Dock to launch Pages.
    When Pages is open, click File menu in the  Pages menu bar.
    Select “Open”.
    When the select document  dialog box opens up, highlight/select the document and click “Open”
    at the bottom right corner of the dialog box.
    s
    https://support.apple.com/kb/PH15304?locale=en_US

  • I downloaded the newest version of firefox today 8/16/11 and now I cannot use Evernote (nor does clipmarks work from before) this is unacceptable. How do I return to the earlier version of firefox? Thank You, Carol Roberts

    I downloaded the newest version of firefox today 8/16/11 and now I cannot use Evernote (nor does clipmarks work from before) this is unacceptable. How do I return to the earlier version of firefox? If there is no way to do this, then I will have to use internet explorer so I hope you can help me with this. Thank You, Carol Roberts

    Until Evernote updates their add-on to mark it compatible with Firefox 6, you can use the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter] to try re-enabling it yourself.
    You can also downgrade to a previous version of Firefox from [https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ this archive], but please be warned that some old versions of Firefox have known security bugs that are fixed in later versions. See also: [[Installing a previous version of Firefox]]

  • HT201269 My iphone contacts are not updating to Icloud, I can create a contact in Icloud and it will update to my phone but I cannot create a contact on my phone to have it update in the cloud, I am using Itunes as the bridge

    My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
    Thanks in advance.

    Hi Cyclops12,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Cheers,
    - Judy

  • I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

    I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
    I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

    How did you do this move?  Unless you know what you are doing you have to move the whole, complete iTunes folder.
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    discoveriweb wrote:
    This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
    Which means that you are only considering half of the problem, but that's your choice.
    I'm out.

  • I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

    I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

    I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

  • Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

    Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

    The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
    (photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
    Did you ever have cs2 installed on this particular computer before?
    If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
    You'll need to use the non activation version of cs2 from here and the supplied serial number:
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

Maybe you are looking for

  • SharePoint Designer 2013 cannot access workflows in Office 365 Site

    I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site as

  • Not All iTunes Music Showing up in iOS7 Music App

    Good Morning! I am new to this forum and hope someone can help me resolve a frustrating problem.  I am a PC person (and was an Andriod person) who now uses a PC for my iTunes library but has two Apple TVs, a iPad mini and an iPhone 5S... I'm converti

  • IPod Updater can't find bundle folder Binary-5

    I seem to be having trouble even restoring my factory settings on my 60g ipod. I of course have been having the sync problem as well, NOTHING has transferred and now, when I run the updater I log the following message in the console, "iPod Updater ca

  • How to install iPhoto on Mac OS X 10.7.5?

    I bought a new macbook pro 10.7.5 on ebay. When i got it i noticed it didnt have iphoto, so i went to the app store and tried to install it, but when i do it says, "iPhoto can't be installed on "Macbook HD" because Mac OS X version 10.9 or later is r

  • ABAP WebDynPro User Interface Elements not shown on layout while designing

    Hi, When I create a new custom ABAP WedDynpro, the UI Element library is not shown on the view layout. I have tried a lot of options in exploring this. Kindly help me Thanks Sai.