Cursor is not visible in MIAW

Hi All,
I'm working on a desktop application (flash swf files opening
in director shell). When I'm launching MIAW with hidden titlebar,
cursor is not appearing in flash textfield. I have used
Selection.setFocus() (Action script method) to put the focus in
flash text field.
After the Selection.setFocus() call when I'm tracing the
Selection.getFocus() value, the reference of the target textfield
is returned. But cursor is not visible/blinking. Even if I try to
type something in the text field, it is typing but cursor is not
blinking/visible.
This issue is random, sometimes after launching the MIAW
cursor is visible in the textfield. If anyone know anything about
this, please post the message.
Thanks and Regards,
H

This will be resolved in Firefox 18.

Similar Messages

  • Digital graph cursor text not visible after build

    We are using Labview 2011. Our application has been using digital graphs, with cursor text to define digital transition information since Labview 7.1. We have ported our application to Labview 2011 (and also 8.6.1 in which it works fine). While in the Labview development environment, the cursor text displays correctly. However when we build it, and run the .exe, we cannot see the cursor text. Our debugging efforts have been in vain - the xy locations are correct, but the cursor text is not visible.
    We want to standardize our next version software on 2011 (even though the Labview 2011 version is 4x larger and 2.2 x slower than the Labview 7.1 version) because we need x64 support, and want to run in Linux as well. We have spent considerable time trying to find out what is wrong, but the debugging time is very long to go through the thought - build - run cycle.
    Any help on why this might be would be gratefully appreciated.
    - Bart Schroder, Cleverscope

    Bart,
    Can you please post a screenshot of your code as well as what's happening when you run your code?
    Thanks,
    Renee M
    Applications Engineer
    National Instruments
    Regards,
    Renée M
    Applications Engineer
    National Instruments

  • CS6, liquify, cursor/brush not visible. Why?

    Just wanted to try out the new liquify.
    With "show mask" ticked the brush is not visible and I cant see what I am doing.
    Am I doing something wrong?

    The ATI website lists this display driver for Win8.1
    Version Number 13.9
    Description:
    Package contains the following graphics drivers and dependent/required software for the products specified in the current version's official release notes for the 64 bit version of Windows 7, Windows 8 and Windows 8.1:
                              Display Driver ver. 13.152
                              OpenCL(tm) Driver ver. 10.0.1268.1
                              Catalyst Control Center ver. 2013.0830.1943.33589
    Is this the one you have?

  • Flashing text cursor not visible on portion of screen

    I've searched all over the internet, and no one has a correct answer for this problem. Apparently the issue has been happening since as far back as CS2. The flashing text cursor is only visible in the upper left hand portion of the screen. If the text your are attempting to edit is on the far right or bottom of the screen, the cursor vanishes. Some people have suggested zooming in and out, but this only appears to solve the problem because the art board may get nudged into the "good" portion of the screen. I did a screen shot and found that the cursor is only visible in about a 930p x 600p area of the window (not including toolbars). Incindentally, the is the same size that the window defaults to when initially opened. On a HD monitor, this amounts to a very small space. Has anyone found a solution to this problem?

    You're not going to like me for this but it is intended to help you.
    The idea that there is "Nothing on my system should have any effect on the Adobe software," is not a good concept, if you or I were engineers we might, and I mean might be able to determine that to be so.
    But even a software engineer might not be able to determine this uunoess the did some trouble shooting.
    Let me ask you a few question that help pinpoint a problem. Do you do any gaming on your system? Do you hsave any utility software installed? Any free fonts or fonts from small software developers?
    Perhaps it is just the preferences which ahve to be refreshed.
    1. Quit Illustrator.
    2. Rename the AIPrefs file (for example, to AIPrefs.old) in the Users/(user)
    /AppData/Roaming/Adobe/Adobe Illustrator CS3 Settings folder.
    3. Start Illustrator. Illustrator creates a new preferences file.
    But it sounds like a conflict to me.

  • Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

    The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

    A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        position: relative;
        text-align: left;
        cursor: pointer;
        width: auto;
        float: left;
    The rest have been given a width of 15em, so this value may be a good start.
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border: 1px solid #CCC;
       width: auto;
        background-attachment: fixed;
    Just keep the border property and remove the other two.
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
              display: inline;
              f\loat: left;
              background: #FFF;
    The following is the original for the above
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
            display: inline;
            f\loat: left;
            background: #FFF;
    Cheers,
    Gramps

  • Menu not visible on ibook G4?!

    We i burn a disc (using DVDSP) it plays on my machine (powerpc G5) and most other machine with the exception of ibook G4s (does work on G3s). when trying to play on ibook G4 the menu is black (not visible) but i can mouse over where the button should be, cursor changes to click pointer, i click and the video plays (with no problems) but only due to the fact that i know the button is there!. Ive had suggestions to change audio format to ac3 which i did (and no change).
    DVD is SD single sided with bitrate of about 5.5 mbps and audio converted to AC3. video is about 5mins long.
    I have had this very same problem with every DVD i have created since begining to use DVDSP 3 months ago
    PLEASE HELP I HAVE A MAJOR DVD PROJECT DUE NEXT MONTH!
    PowerPC G5 Mac OS X (10.4.8)

    Sounds like you have this issue
    http://discussions.apple.com/thread.jspa?messageID=3049731&#3049731
    Workaround is to make it a motion menu (even a still with looping) that seems to work

  • My other mail boxes are not visible in mail after upgrading to Mountain Lion

    my other mail boxes are not visible in mail after upgrading to Mountain Lion

    In the mailbox panel move your cursor slowly down the right hand side . Should reveal show and hide.

  • The 'Add to Basket' button on Amazon is not visible. Occurs with earlier versions of Firefox and other websites.

    On many websites, buttons are not visible but moving the cursor over them it changes to a hand so I know there is a button and the tooltip appears.
    If I look at page info for the button it is shown as a transparent-pixel.

    I have reset to Firefox defaults and problem has been fixed. Options>content>colours>allow pages to choose colours : if deselected, problem occurs, if selected it is fixed.

  • Oracle 10G Commit Not Visible

    I have a commit or concurrency issue I hope someone can shed some light on.
    I'm building rows in a reporting table via several stored procedures and reporting on the results.
    The final stored procedure uses the rows built by the initial stored procedures and occasionally, the rows initially created are not visible to the final stored procedure.
    Is there a way to force Oracle to COMMIT the rows and WAIT so there are 100% visible to subsequent stored proccedures?
    Thanks. (Oracle DB 10.2.0.3.0 Client 11.2.0.2)
    In summary -
    1> Proc #1 runs and builds summary rows
    2> Proc #2 runs and builds summary rows
    3> proc #3 runs and builds summary rows
    4> proc #4 then does some totals on the results of the first 3 procs.
    Sometimes the results of the first procs are not visible to proc#4 when it runs.
    I have explicit commits at the end of the stored procedures. In theory I (or anyone else) should be able to see the results of each stored procedures as it runs but sometimes they are not. I have actually seen this happen by monitoring the rows in the reporting table coupled with DBMS_OUTPUT from the stored procs.
    The reporting table can be active, accessed simultaneously by a 20? users at a time. It does seem timing sensitive, when I add some wait time in the app before calling each stored proc the number occurrences where rows are not found decrease. Similarly, when the numbers of users decrease the number of occurrences decrease.
    proc1 summary_labor
    cursor proc_cursor1 is select * from table1;
    For c_row1 in proc1
    Do some calculations
    Insert a summary row into reporting table
    end; -- For
    COMMIT;
    End Proc1

    user7313584 wrote:
    I have a commit or concurrency issue I hope someone can shed some light on.
    I'm building rows in a reporting table via several stored procedures and reporting on the results.
    The final stored procedure uses the rows built by the initial stored procedures and occasionally, the rows initially created are not visible to the final stored procedure.
    Is there a way to force Oracle to COMMIT the rows and WAIT so there are 100% visible to subsequent stored proccedures?
    Thanks. (Oracle DB 10.2.0.3.0 Client 11.2.0.2)
    In summary -
    1> Proc #1 runs and builds summary rows
    2> Proc #2 runs and builds summary rows
    3> proc #3 runs and builds summary rows
    4> proc #4 then does some totals on the results of the first 3 procs.
    Sometimes the results of the first procs are not visible to proc#4 when it runs.
    I have explicit commits at the end of the stored procedures. In theory I (or anyone else) should be able to see the results of each stored procedures as it runs but sometimes they are not. I have actually seen this happen by monitoring the rows in the reporting table coupled with DBMS_OUTPUT from the stored procs.
    The reporting table can be active, accessed simultaneously by a 20? users at a time. It does seem timing sensitive, when I add some wait time in the app before calling each stored proc the number occurrences where rows are not found decrease. Similarly, when the numbers of users decrease the number of occurrences decrease.So procedure 4 is dependant on the completion of procedures 1 thru 3. So what is causing procedure 4 to run before those others have completed? You need to ensure it doesn't run until such a time.
    proc1 summary_labor
    cursor proc_cursor1 is select * from table1;
    For c_row1 in proc1
    Do some calculations
    Insert a summary row into reporting table
    end; -- For
    COMMIT;
    End Proc1Horrible code.
    Use a single INSERT ... SELECT ... statement to avoid context switching which is inevitably causing the code to run slowly.

  • Cursor.HAND  not displaying.

    Hai folks,
    i have two javafx custom components. i'll show one component at a time. i'll show another component based on the user selection.
    in my first component ,i set cursor to Cursor.HAND . it shows initially perfect.
    after showing the second component , again i set the second component visible property to false. now i set the first component visible property to true.
    but the HAND cursor is not showing ?.
    can any one tell me how to resolve this problem.
    content:[
    c1 = Component1{
    cursor:Cursor.HAND
    visible:true
    translateX: 10
    translateY:10
    c2 = Component2{
    visible:false
    translateX:10
    translateY:10
    SwingButton{
    action:function():Void
    if( c1.visible )
    c1.visible = false;
    c2.visible = true;
    else
    c2.visible = false;
    c1.visible = true;
    .....Thanks.
    Regards,
    Mani

    Hi Charlie
    Is there another object in front of the Click Box? Perhaps a
    Rollover of some sort?
    Just pondering out loud... Rick

  • Images not visible in applet

    Dear all
    I have this applet for which i designed a toolbar.This toolbar has image icons that display some of the more used controlls. When i test it inside Eclipse i can see if perfectrly. But when i load it inside a browser i get some unexpected behaviour. The images for the image icons that are supposed to be in the tool bar are not visible. I checked the console output but it doesnt give me any permission errors. In the policy file that i placed in the same directory as the .html file i said to give all permisions.
    Is there anything i am missing? (My images are in a diferent subdirectory then the ones where the class files are)
    I know it is some sort of permission problem but dont know how to work it out. I tried by creating a signed applet too. But i think there must be something i am doing wrong.
    Cheers
    Dan

    This is the code i am using to set the image for the button:
    JToggleButton eraser = new JToggleButton( new ImageIcon("ToolbarIcons/eraser.JPG"));
    eraser.setMargin(new Insets(0,0,0,0));
    The result i get is the button with all the functionality but it is totaly grayed out without the image. So i am guessing the image does not get loaded.
    And the second instance where i am getting the images is :
    Toolkit tk = Toolkit.getDefaultToolkit();
    Image img1 = tk.getImage("Cursors/rubbermouse.gif");
    I am using the second case to load some images and cursors.
    Cheers
    Dan

  • External hard drive not visible in disk utility or finder

    Hi all,
    I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
    My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
    I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
    The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
    Any help is appreciated
    Thanks,
    Bruce

    An update for anyone who can help me:
    I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
    I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
    As the HD is not visible there is no option to re-format or anything.
    This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
    Thanks in advance for any help.
    Bruce

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • IDOC not visible in IR but metadata successfully imported

    Hi,
    I have this wiered issue.
    I want to import IDOC WPUSKR01 (cashier productivity) from BI.
    But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
    But I can manually import the metadata from BI in idx2.
    Now how to import this in IR?
    I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
    Regards,
    Anirudh Vyas.

    Hi,
    In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
    I have checked all the segments in we31, they are all released.
    But it gives error:
    Error: IDoc type WPUKSR01 contains errors (unable to read segments)
    Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
    But the same thing is failing in BI. I have SAPALL permissions in all the systems.
    Can I use Idoc imported from R/3 in scenario for BI?
    regards,
    Anirudh.

  • How can I add a device to my library? My e-reader is registered but not visible.

    Hello,
    I use a Tolino Shine and can download E-Books via WLAN directly to it. I can also download the books to my netbook. However, when I plug the Tolino into my netbook it is not visible in the Adobe library and I cannot move books from the library to the Tolino.
    I tried to reset the Tolino to the manufacturer settings. This did not improve the situation.
    Any suggestions?
    Thanks a lot!

    http://www.apple.com/icloud/find-my-iphone.html
    any chance of it working on non-apple phones?
    No, it requires the operating system iOS, only available on Apple Devices.

Maybe you are looking for