Cursor name visable property on xy graph: name overlays cursor point.

I have an XY grpah set up, and I realized that when i apply the name visable attribute to the cursors programmiably, the name seems to overlay teh cursor, being right on top of it. Yet if i do it manualy through the cursor legend, it shows it on top... its very odd. Ultimatly i do NOT want to do ti manualy becuase i wil be have an unknown amount of cursors being created and would like them all to show the lables that i give them ABOVE the point... not ontop of it, because its obivously not readable. Anyone have a solution for this?
Thanks,
Mark

Mark,
There is no property to set the position of the cursor label. However, you can add empty characters at the begining of the label, so that the actual string will be to the right of the vertical cursor.
In LabVIEW 7, the cursor label is displayed above the cursor point, but on top of the vertical cursor line.
Zvezdana S.

Similar Messages

Edit /control graph names in program

Hi
I am able to generate xy-graph from acquired data from instrument. But unable to change graph name by programmatically, i need this thing very much as i have to generate graphs of 500 in number, plot/graph name also i want to link it with file name, so that by seeing the graph we are able to get the some parameter values in plot/ graph name.
I want to edit / link one text box with graph, so that it should be stored/saved with graph, when i save plot programmatically.
By seeing the graph , i should be able to differentiate betweeen plots by seeing the graph name.
please help

Hi there
You cant change the graph name but you can change the caption. Right click on the XY plot and show the caption, then you can use the property nodes. Take a look at the attached program.
Hope this helps.
Ian
Attachments:
XY Image.vi ‏41 KB

How the refer the HTML components name or property.

Hi guys,
My doubt is on STRUTS, if this is not correct forum to ask the questions in struts pls redirect me to the correct forum.
i am very new to struts.......
my question is ,
we are using lot of components like text, button and radio in the jsp file, like
<html:text property="">
The value of such components will be read out from the Bean, but where they are specifying the name or property name of the component.
see the below example,
index.jsp
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<html:html locale="true">
    <head>
        <title>Struts File Upload and Save Example</title>
        <html:base/>
    </head>
    <body bgcolor="white">
        <html:form action="FileUploadAndSave" method="post" enctype="multipart/form-data">
            <table>
                <tr>
                    <td align="center" colspan="2">
                    <font size="4">File Upload on Server</font>
                </tr>
                <tr>
                    <td align="left" colspan="2">
                    <font color="red"><html:errors/></font>
                </tr>
                <tr>
                    <td align="right">
                        File Name
                    </td>
                    <td align="left">
                        <html:file property="theFile"/>
                    </td>
                </tr>
                <tr>
                    <td align="center" colspan="2">
                        <html:submit>Upload File</html:submit>
                    </td>
                </tr>
            </table>
        </html:form>
    </body>
</html:html>
* StrutsUploadAndSaveForm.java    (Bean)
* Created on September 8, 2007, 4:05 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package com.myapp.struts;
* @author subbu.chandrasekaran
import org.apache.struts.action.*;
import org.apache.struts.upload.FormFile;
* Form bean for Struts File Upload.
public class StrutsUploadAndSaveForm extends ActionForm
private FormFile theFile;
   * @return Returns the theFile.
public FormFile getTheFile() {
    return theFile;
   * @param theFile The FormFile to set.
public void setTheFile(FormFile theFile) {
      System.out.println("the set method called");
    this.theFile = theFile;
package com.myapp.struts;
import com.myapp.struts.StrutsUploadAndSaveForm;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.upload.FormFile;
import java.io.*;
* Struts File Upload Action Form.   (Controller)
public class StrutsUploadAndSaveAction extends Action
public ActionForward execute(
    ActionMapping mapping,
    ActionForm form,
    HttpServletRequest request,
    HttpServletResponse response) throws Exception{
    StrutsUploadAndSaveForm myForm = (StrutsUploadAndSaveForm)form;
    System.out.println("the instance has been created for myForm");
    System.out.println("Going to get file");
        // Process the FormFile
        FormFile myFile = myForm.getTheFile();
        System.out.println("Got selected file");
        String contentType = myFile.getContentType();
    //Get the file name
        String fileName    = myFile.getFileName();
        //int fileSize       = myFile.getFileSize();
        byte[] fileData    = myFile.getFileData();
    //Get the servers upload directory real path name
    String filePath = getServlet().getServletContext().getRealPath("/") +"upload";
    /* Save file on the server */
    if(!fileName.equals("")){
        System.out.println("Server path:" +filePath);
        //Create file
        File fileToCreate = new File(filePath, fileName);
        //If file does not exists create file
        if(!fileToCreate.exists()){
          FileOutputStream fileOutStream = new FileOutputStream(fileToCreate);
          fileOutStream.write(myFile.getFileData());
          fileOutStream.flush();
          fileOutStream.close();
    //Set file name to the request object
    request.setAttribute("fileName",fileName);
        return mapping.findForward("success");
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%--
The taglib directive below imports the JSTL library. If you uncomment it,
you must also add the JSTL library to the project. The Add Library... action
on Libraries node in Projects view can be used to add the JSTL 1.1 library.
--%>
<%--
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
--%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Success</title>
</head>
<body>
<%
String fileName=(String)request.getAttribute("fileName");
%>
<p align="center"><font size="5" color="#000080">File Successfully Received</font></p>
<p align="center"><a href="upload/<%=fileName%>">Click here to download</a></p>
</body>
</html>
Struts-config.xml
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC
          "-//Apache Software Foundation//DTD Struts Configuration 1.2//EN"
          "http://jakarta.apache.org/struts/dtds/struts-config_1_2.dtd">
<struts-config>
    <form-beans>
     <form-bean
    name="FileUploadAndSave"
    type="com.myapp.struts.StrutsUploadAndSaveForm"/>
    </form-beans>
    <global-exceptions>
    </global-exceptions>
    <global-forwards>
        <forward name="welcome" path="/Welcome.do"/>
    </global-forwards>
    <action-mappings>
        <action path="/Welcome" forward="/welcomeStruts.jsp"/>
        <action
        path="/FileUploadAndSave"
        type="com.myapp.struts.StrutsUploadAndSaveAction"
        name="FileUploadAndSave"
        scope="request"
        validate="true"
        input="/index.jsp">
        <forward name="success" path="/downloaduploadedfile.jsp"/>
        </action>
    </action-mappings>
    <controller processorClass="org.apache.struts.tiles.TilesRequestProcessor"/>
    <message-resources parameter="com/myapp/struts/ApplicationResource"/>
    
    
    <plug-in className="org.apache.struts.tiles.TilesPlugin" >
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml" />
        <set-property property="moduleAware" value="true" />
    </plug-in>
    
    <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
        <set-property
        property="pathnames"
        value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
    </plug-in>
</struts-config>can any one pls give me explanation, how the data is being flow thru out these files.
--Subbu

hi,
Study MVC once again deeply,
it will explain all what you expect..
links for Flow
http://www.ibm.com/developerworks/cn/websphere/techjournal/0302_fung/fung.html
http://java.sun.com/blueprints/patterns/MVC.html
Concepts
http://en.wikipedia.org/wiki/Apache_Struts

How do I set cursor.index to anywhere in the graph array?

I am using LV 8.5.1 and feeding an XY graph with an X-Y array of data. Only a section of the array is displayed on the graph. I have a cursor (single-plot).
I would like to set Cursor.Index property node of the cursor associated with the plot to the maximum index value of the graphed array regardless of the XScale range. I don't seem to be able to do it. I cannot set it beyond a certain number. When I rescale the graph I have a new maximum number. Is this what should happen?
To get around this, I am momentarily setting the XScale.ScaleFit property to 1, which then allows me to set Cursor.Index to maximum (I then immediately reduce my scale range appropriately). I am having to do this before every occurrence of setting the Cursor.Index in case the new setting exceeds the currently allowed maximum value. Just seems a bit clunky.
Thanks for any help.

This is no longer a problem. My data is too big to feasibly be fed into a graph so am having to chop it up and use my own index pointer.

How to modify the cursor palette size in a waveform graph programmaticaly in LabVIEW8

In previous version of LabVIEW it vas possible to create reference to cursor panel (array) so it was possible to resize, change number of rows, in it. It will be useful for me to have reference to TreeControl contained in cursor legend. How to create this reference? The method described in the manual works for scale legend but not work for cursors panel.

Thank you JLS once again.
In my opinion the cursor palette at list should have the following functionality:
Automatic resizing of the panel while adding and removing cursors programmatically (like plot legend)
Positioning the panel programmatically (like plot legend)
Hiding any columns and rows. For example when I hide one of the cursors (let say the second one, not necessary the last one) also this one should disappear from cursors panel, removing cursor from cursor list might be inconvenient. If I have one cursor and not enough room to show cursor panel I can not hide the cursor name column that is unusable but occupies place on the panel
Altering number of column and rows programmatically. If my cursors serve for selecting part of the signal to be processed (for example trimming signal) it is sense less to show cursors Y position
Hiding cursor navigator, it works very badly (try to move cursor only to the next measurement point to select exactly for example 10000 points), so I move it under other controls.
Formatting data displayed
Having additional elements (coming from underlying tree control) is not necessary in several cases. Life will be much more pleasant if it will be possible to get reference to this tree control.
By the way it is possible to customize this palette. In design mode configure WaveformGraf to show cursor legend. Select it and then select from menu “Customize control…” Now you can do whatever you (I) want, for example change the column name from X to Time. Save your work, if prompted replace original with just designed and… nothing changes – funny isn’t it?
Best regards,
Zygmunt

Graph xy move cursor programmability

Hi, i have this problem,
i have graphXY with one cursor, "Snap to point" "Channel 1", when programmability associate one position(x) for the cursor, no accept the new position. Why?
Hola a todos, perdón por mi inglés, pero tengo el siguiente problema, Tengo un gráfico de tipo Xy, en el cual tengo un cursor asociado al Plot 1 bajo la modalidad Snap to point, si programáticamente quiero cambiarle el valor X a ese cursor, no solamente no lo hace, sino que vuelve al princicipio de la señal. Cómo puedo evitar esto?. No quiero que funcione el cursor en forma free, porque no me toma los valores del Plot.
Podrían saber por qué es esto?
Muchas gracias, saludos, MFS.

So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?

Moving xy graph cursor with mouse and programmably controlling snap to point

Hi,
I have run into a bit of a problem. I am trying to create a program which allows a user to select a location on an XY graph by simply clicking in the vacinity of the plot. Most of it is working, however I find that I can't programmably control the snap to point function reliably.
I hope this is a clear outline of the problem:
- The cursor starts in a Free state, so that when the
user clicks in the plot area, I can set the cursor
position to the nearest point by setting the
CursorPosition using the graph's property node.
- Maybe the user didn't like the chosen location and
wants to drag the cursor over a bit. Ok, user drags
the cursor to a new position.
- Now th
e cursor position is probably not exactly on
the plot trace. If, at this point, I set the cursor
to Snap To Point, the cursor does not snap to the
nearest point on the graph (relative to its current
position), but instead to the last place a _mouse_
action placed it.
- Immediately after the new location has been set,
the cursor state has to be reset to free in case I
need to programmably move the cursor again (I
can't seem to programmably control the mouse in
any state but Free)
How do I go about getting the cursor to snap to the closest point at it's new location? I'm at a loss.
Any insight you might have would be greatly appreciated.
Thanks much!
Tere

So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?

Cursor values manipulation in "Mixed Graph"

I have two cursors on the "Mixed graph".
Using Cursor Palette, I am reading the current values of both cursors. But when I manipulate them, it works only when the program is running. Is there any way to find the difference between the two even when the program is not running.
Secondly, when I try to find the x-value using property node, it gives X- value of 2nd cursor only. how can I extract the X-value of 1st Cursor.

Billo000,
Here are some examples on using Mixed Graphs and the cursor palette:
https://decibel.ni.com/content/docs/DOC-3671
https://decibel.ni.com/content/docs/DOC-2065
https://decibel.ni.com/content/docs/DOC-2171
https://decibel.ni.com/content/docs/DOC-3118
I hope these get you going
Sam S
Applications Engineer
National Instruments

ConnectionException: Name space accessor for the java: name space has not b

Hi,
While running JUnti test cases I am getting the following. Can anyone help?
com.deere.u90.iaf.jdbc.connection.ConnectionException: Name space accessor for the java: name space has not been set. Possible cause is that the user is specifying a java: URL name in a JNDI Context method call but is not running in a J2EE client or server environment.
IAF JDBC Connection Management Framework exception in JNDI lookup of DataSource.
Source of configuration data = C:\starteam\JDPS - Software Delivery system\3123_CanDB\sds\WebContent\WEB-INF\classes\config\SDSConnectionManagerLocal.properties
Dynamic Properties = false
Property Name Suffix = SDS
Connection Pooling Enabled = true
JNDI Provider URL = corbaloc:iiop:wpuds90700.jdnet.deere.com:2811
DataSource Name = java:comp/env/jdbc/SDSDEVLDataSource
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.initializeEnvironment(ConnectionManager.java:282)
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.<init>(ConnectionManager.java:224)
     at sds.view.intranet.servlets.SDSGenericServlet.getConnectionManager(SDSGenericServlet.java:192)
     at junittest.ProgrammedECUAddComponentTest.setUp(ProgrammedECUAddComponentTest.java:75)
     at junit.framework.TestCase.runBare(TestCase.java:125)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:392)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:276)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:167)
Thanks in advance,
Dhir

I also get the same problem, this is very tedious but if you edit the song somehow and re-save it then it will copy. Not sure what the problem is at all, tried contacting Apple about this to no avail.

I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

The name cannot be matched to a name in the Address List

Hi,
I checked several posts but no luck.
Problem: We currently have Exchange 2010 and 2003 co-existence, busy migrating to 2010. We have several domains as well. A problem came up in one of our remote access domain where we have Citrix running. After the user has been moved to the new 2010 server
and you re-create their mail profile in Outlook 2010 then it will give the following error:
The name cannot be resolved. The name cannot be matched to a name in the address list.
A popup box appears with the server name exch2010cas.domain.local and the mailbox field =SMTP:[email protected] When you click on Check Name the error keeps popping up. When I change the server to exch2003.domain.local though and click Check Name the
mailbox gets underlined and the servername changes back to exch2010cas.domain.local in the exchange server textbox.
I'm pretty sure it must be an AD or DNS problem somewhere but I'm not sure where? I did add some domain suffixes to the new Exchange server so it can resolve hostnames in the local and remote domain. I also looked at the GAL and the entries for the user
is in there. I'm not sure if it might have something to do with LegacyExchangeDN value either?
I appreciate any help, thanks.

Hi,
I recommend the following troubleshooting:
1.Verify that the Active Directory account that you use either to create the client profile or to log on to the mailbox has been mailbox-enabled.
2.Verify that the user can use the Active Directory account to view sibling objects in the Users container (or in the Active Directory organizational unit that contains the user account).
3.Verify that the user account has been stamped by the Recipient Update Service after you mailbox-enable the user account.
4.Verify that the user can see both the Global Address List objects that are listed in the
showInAddressBook attribute and the members of the Global Address List using Ldp.exe
5.Log on as an administrator, and then verify that there are no duplicates in the
addressBookRoots attribute of the Microsoft Exchange object under <var>Domain</var>,cn=Configuration,cn=Services
For more detail steps, you can refer to the following article:
http://support.microsoft.com/kb/297801/en-us
Thanks,
Angela Shi
TechNet Community Support

In address book, if I try to show first name before the last name, why do only a few names change?

Using address book on 10.7.2, when I go to "preferences" to change the display order between showing the "first name" before or after the last name, only about 25% of names will change. The rest all stay in the same order. Any ideas?

By default any outgoing email has the addresses saved in the Collected address book. You can turn this option off if you want.

IPod won't sync - "Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"

I recently bought a used iPod Classic (my previous one was stolen). I still had my iTunes library on my computer so I was just going to hook it up and sync my library over, replacing what was on there from the previous user. When I first hooked it up to my computer (Windows 7 64-bit) there was a message saying the drivers were not installed properly. I un-plugged it, and plugged it back in to the same result. I tried 1 more time and didn't get the error message. I then opened iTunes and clicked on the iPod. I checked for updates, then clicked "Restore this iPod". Next, I set it up to sync music, and the sync began. It seemed to work for a while, the "Syncing iPod" message was displayed at the top, and it said it was copying songs over. It did this for about 10 minutes before I finally got the following message:
"Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"
After that happens, everything seems to freeze up. iTunes says it's still syncing, but nothing ever seems to happen. If I click the eject button, nothing happens either. I eventually have to just disconnect the iPod. The iPod seems frozen for a while, then it seems to reboot itself (the gray apple window displays), then the interface displays and I can get to the songs on there. But, only a very small portion of my library makes it to the iPod. I've tried several times now and it always seems to be the same songs that DO make it onto the iPod. However, it's a different song listed in the error message each time, so it doesn't seem to be just 1 song causing the problem. Also, once I hook the iPod back to the computer, Windows displays a message prompting me to scan the drive and fix errors. I did it once and it said it found some errors and fixed them.
I saw this thread: https://discussions.apple.com/thread/3924425
and some people were suggesting removing everything from your library then re-adding it, in case the paths were messed up. I tried that and still got the same results. I also updated iTunes to the latest version, and I've tried different USB ports and 2 different USB cables.
I also found instructions for a batch file you can run that, I believe, updates the iTuens DLLs, I did that as well but it did not help: http://support.apple.com/kb/TS1539
What else can I try to fix this?

bump (if that's allowed)

Dynamic File Name depending on the Source File name

Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name                 Targer Folder/Filename
NK01.VR59.L2007030         VR59/Rec.l200
NK01.VR71.L2017030         VR71/Rec.l201
NK01.VR77.L2027030         VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
Vijay

Hi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Why does iTunes stop working when I try to type the album name in to submit cd track names?

I have a cd that I'm trying to separate, but whenever I try to type the album name in the submit CD track names box, iTunes freezes, then quits working. Why is it doing this and what can I do to stop it?

Does it happen for any slideshow? Or only for one slideshow with certain images?
Does iPhoto also freeze for a new iPhoto library, if you create a new library with some test images?
If iPhoto only freezes for a certain slideshow, check, if it is one of the photos or videos, that is making the slideshow freeze. Create a new slideshow and add the images one by one, to fnd the one, that cannot be played. Remove it.
If iPhoto only freezes with all slideshows in your current library, repair your iPhoto library. It may have been migrated with permission issues. How did you restore the library, after you wiped your mac and clean-installed?
To repair the library using the First Aid Tools, see Old Toad's post here: Rebuild iPhoto Library, Version 11, see "Fix 1". In your case, I'd start with Repair Permission, the Repair database. Apply the other fixes, if need be.
Post back, if the repair does not help.
Léonie

Cursor name visable property on xy graph: name overlays cursor point.

Similar Messages

Maybe you are looking for