Graph xy move cursor programmability

Hi, i have this problem,
i have graphXY with one cursor, "Snap to point" "Channel 1", when programmability associate one position(x) for the cursor, no accept the new position. Why?
Hola a todos, perdón por mi inglés, pero tengo el siguiente problema, Tengo un gráfico de tipo Xy, en el cual tengo un cursor asociado al Plot 1 bajo la modalidad Snap to point, si programáticamente quiero cambiarle el valor X a ese cursor, no solamente no lo hace, sino que vuelve al princicipio de la señal. Cómo puedo evitar esto?. No quiero que funcione el cursor en forma free, porque no me toma los valores del Plot.
Podrían saber por qué es esto?
Muchas gracias, saludos, MFS.

So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?

Similar Messages

Waveform graph:move cursor automatically to know coordinate

Good Day
Can i know how to move cursor automatically in the waveform graph
example: i have known Y =2 what is the value of x is...
which properties in property node should i use?
attached also my vi (Coordinate of XY data using cursor)
Best Regards
Ahmad Tarmimi
Solved!
Go to Solution.
Attachments:
coordinate XY.vi ‏40 KB

Good Day
I was trying to program the cursor automatically but it does'nt seem working for me..
Can you please advise me on this matter...
Attached also my study pupose vi
Best Regards
Ahamd Tarmimi
Spoiler (Highlight to read)
Attachments:
cursor adjustment.vi ‏53 KB

How to move cursor from one textfield to another textfield byusing enterkey

hii all,
I have a problem in java script.
To move cursor from one textbox to another text box ,I have take the length of the textboxes of the first column.I used onkeyDown event .
in the function ,firest i checked the condition like
for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
if(event.keyCode==13)
form1.box[i+1].focus();
return false;
by using this the cursor is moving from first text box to secon textbox and stops.
if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
if any one has solution please help me.
also if we can do in another way also,please help me.
thanx.>

try the following code :
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> New Document </TITLE>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</HEAD>
<SCRIPT language="Javascript">
function fnTest(str)     {
          if(event.keyCode==13)          {
               if(str == 4)     {
                    formHeader.box[0].focus();
               else     {
                    formHeader.box[parseInt(str)+1].focus();
               return false;
</SCRIPT>
<BODY>
<FORM name="formHeader">
<CENTER>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('0');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('1');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('2');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('3');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('4');">
</CENTER>
</FORM>
</BODY>
</HTML>
----------------------------------------------

How to move cursor to a particular field in a form when the form opens

Hi All,
Using Forms Personalization how to move the cursor to a particular field in a form when the form opens.We are using Oracle Applications 11.5.10.2
Please let me know as soon as possible.
Thanks,
--John.

Hi Satya,
Try the following
Open the forms personalization window
Seq: 10
description : Move cursor
Level : Function
On Condition Tab-
Trigger Event : when-new-item-instance
Trigger Object:- (The field on which the cursor is appearing now when you open the form ) for eg : If I am working on a vendor Master form in that case it would be -VNDR.VENDOR_NAME_MIR.
Processing Mode : Both
Context:
whatever context you want to do it respoansibility level or user level.
On the Actions Tab
Seq: 1
Type: Bulletin
Bulletin type : GO_ITEM
Argument : The field to which you want to navigate to. (In my case I want to navigate to Alternate name on the Vendor master form so it would be VNDR.VENDOR_NAME_ALT_MIR).
see if it works for you.
cheers,
Ankur

Browse purchased movies, TV programmes on iPhone 5

iPad (3) with iOS 6 compared to iPhone 5 in iTunes Store. I can't see purchased movies, TV programmes etc on the iPhone. Is this just my iPhone or yours too?

the Purchased button has been added to the More button in iTunes on iPhone 5. Why was this not there before? Odd.

Xy graph automatically moves down

Hi,,,, I've got a problem. I have the XY graph and I would like the graph automatically moves down while running program. If u guys have ever seen the monitor of a roller testbench, Im working with a guidance system for a driver, using LabVIEW to create speed profile graph. I've manually done the examples by panning and PrtSc them as attached files.
Any idea?
Thanks
Mannie
Attachments:
speed_profile.jpg ‏778 KB

If I understand what you want to do, all you need to do really is switch the X and Y axes. Here's a quick example.
Try to take over the world!
Attachments:
Vertical Chart.llb ‏47 KB

Move cursor through fields in screen with ENTER like TAB

Hello experts !
I want to move the cursor between fields in a custom screen just like kay TAB do.
I have used command:
MOVE CURSOR TO FIELD mara-spart... but it doesnt work, Cursor remains in th first field..,
any help?
Thank you and regards,
Ibrahim Andres

For example, here is the exact code which is working in my system and has been for quite a while.
The screen flow logic.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1500.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1500.
The code for module status_1500.
*      Module STATUS_1500 OUTPUT
module status_1500 output.
set pf-status 'STDCONSOLE'.
set titlebar '1500_07'.
<b> set cursor field cursorfield.</b>
endmodule.
The PAI module USER_COMMAND_1500
*      Module USER_COMMAND_1500 INPUT
module user_command_1500 input.
case sy-ucomm.
    when 'ENTER'.
<b>* Scroll thru fields when user hits enter
      get cursor field cursorfield.
      case cursorfield.
        when 'P_TICNO'.
          cursorfield = 'P_PERNR'.
        when 'P_PERNR'.
          cursorfield = 'P_WERKS'.
        when 'P_WERKS'.
          cursorfield = 'P_LGORT'.
        when 'P_LGORT'.
          cursorfield = 'P_AREAC'.
        when 'P_AREAC'.
          cursorfield = 'P_TICNO'.
      endcase.</b>
   endcase.
Here I'm using the same variable CURSORFIELD for setting/getting.
Regards,
Rich Heilman

Applescript MS Word move cursor

Hi -- how do I use applescript to move the cursor
a few characters (left, right, down) in a word doc?
Thanks!

Hi,
You can also move the cursor without using the GUI Scripting.
Here are some examples :
tell application "Microsoft Word"
         -- count : The number of units by which you want to move
      move range text object of selection by a character item count 1 --move the cursor right
      move range text object of selection by a character item count -1 --move the cursor left
      end key selection move unit a line extend by moving -- move cursor to the end of line
      home key selection move unit a line extend by moving -- move cursor to the beginning of line
      move range text object of selection by a paragraph item count 1 -- move cursor to the beginning of next paragraph
      --** move the cursor after the last character in the next paragraph, error if no (next paragraph)
      set x to (get selection information selection information type first character line number) as integer
      try -- try block to not display the error
            move end of range (text object of paragraph (x + 1) of document 1) by a character item count -1
      end try
end tell
Here is a list a (the unit by which to move the collapsed range) that you can use with the move range command : (a character item, a word item, a sentence item, a paragraph item, a line item, a story item, a screen, a section, a column, a row, a window, a cell, a character formatting, a paragraph formatting, a table, a item unit)
Also, there are other commands to move cursor, like move range end until, go to next , navigate, ...

OCI: how to move cursor?

I'm writing a program with OCI (for Oracle server -linux) and gonna handle
as much data as number of millions.
The problem is that I have to show a page which can hold only 10~50 records
at once and if 30 records from 100000th row through 100030th row is to be shown,
I think I have to move cursor to the starting position(100000th row in this
case), right?
Is there anyone who can tell me how to make this work with oci library function?
All I can do at the moment is passing all those previous 99999 records by and
select next 30 records. You know, this takes very very long time and makes no
sense to end users.
Any suggestions or idea would be greatly appreciated.
null

OCI doesn't have any screen handling functions nor is it the purpose of OCI. If you want screen handling functions, you can use curses or GTK+ or, if you really want to shoot yourself in a foot, MFC.

Move cursor position in TextField

hi all
I am creating a keyboard in flash. i want to move cursor
position in TextField to insert new character, if anybody knows
plese mail me.
thanks in advance

Hey thanks v.seregin but i used an entirely different approach.
Here is my application where i m trying to move pen in input text box
This is an application in facebook please give any suggestions etc..
http://apps.facebook.com/linc-mydiary/
hey thanks to all people who solve our problems.

Trackpad will click and select but will not move cursor

After breaking the trackpad in my early 2008 MBP I replaced it.
Upon startup the trackpad will click and select but will not move cursor... I have tried all system resets short of wiping and reinstalling OS.
Any suggestions?

Because the click has to deal with a physical button press while the movement has to deal with the trackpad detecting the movement of your finger on it.
Just for giggles, if you hold down the Option key on bootup and get to the boot menu on it, does the mouse work then? If so, then it's an OS issue (could be a setting or some .plist that's jacked up.

Touching the top next to keyboard changes programs and moves cursor.

Touching the top next to keyboard changes programs and moves cursor. Any Clues?

I would take it to an Apple Retail Store or an Apple Authorized Service Provider (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store, make a reservation.

XY graph "mouse move" event stops generating when click on cursor

Hello All
When the mouse is moving freelly inside the XY graph control, the "mouse movement" event is fired.
The same happens when muse clicks anywhere in the graph with the exception of cursors.
hen mouse clicks on cursors the "mouse move" event is NOT generated even though the mouse is phisically moved.
Is there any explanation to this.
I enclose the example.
regards
Pawel

Just today I had the same problem -> my solution:
set event timeOut to some value(I have it at 1ms) then
add to globalVariables some BOOL variable that will signal if mouse is down or up (set the flag in appropriate event),
then add a case in the timeOut event which will read this
global variable(flag) -> if it's TRUE then change the needed parameter.
So even if the mouse move event isn't fired the main timeout event is.
Not a perfect solution, but better than nothing.
Peace
Waldemar

Acer Aspire E5-511. touchpad/mouse move cursor but will not open any programmes other than McAfee,

Just purchased this laptop, initial thought it was a great improvement on my 3 year old Aspire!!! Latest problem after doing a complete scan with McAfee is the touchpad or remote will move the cursor but will not open any programmes other than McAfee. The Windows symbol (bottom left hand corner) does not light up when the cursor is over it and I am unable to use windows key + C to get charms bar. For background I have been unable to install windows updates since I have had this computer, two days, hence doing a scan to look for reasons.

Thanks for your suggestion Acer-Justin. Sorted it by a switching off/reset using keyboard. Sorted update problem using Microsoft who found a problem with update system then installed Windows 10 - all appears ok for now.

How Do You Move Cursor To Another Plot?

I have a couple of plots I am working with. How do I move the Cursor (programmatically) from one plot to the next?
I have tried assigning the "Plot" to the cursor and using SnapToPointOnPlot, but it does no good.
You can set the snapmode to SnapToNearestPoint and drag the cursor there (that works), but I need to do it programmatically.

The following code demonstrates what you want to do. The form should have a 2D Graph (CWGraph1), a DSP control (CWDSP1), and a command button. Your difficulty may have been in (not) using the Set statement to assign a plot to the cursor. The VB lines of particular interest are in bold.
Private Sub Command1_Click()
Dim phase
Dim x
Dim y
'Create one sine wave
phase = 0
x = CWDSP1.SineWave(128, 1, 0.01, phase)
'Create a second sine wave
phase = 30
y = CWDSP1.SineWave(128, 1, 0.01, phase)
'Remove any plots from graph
CWGraph1.Plots.RemoveAll
'Plot one
CWGraph1.PlotY x
'This line prevents the next call to PlotY from overwriting the first plot.
CWGraph1.Plots(1).MultiPlot = False
CWGraph1.PlotY y
'I added a cursor interactively, so it already exists on the graph.
'Tell the cursor to snap to points on a specific plot
CWGraph1.Cursors(1).SnapMode = cwCSnapPointsOnPlot
'Tell the cursor which plot to snap to. You MUST use a Set statement because
' CWGraph1.Plots(1) references an object (in this case a plot object.)
Set CWGraph1.Cursors(1).Plot = CWGraph1.Plots(1)
'Put the cursor at index 64 of the plot data.
CWGraph1.Cursors(1).PointIndex = 64
MsgBox "asdf"
'Attach the cursor to the second plot.
Set CWGraph1.Cursors(1).Plot = CWGraph1.Plots(2)
'Put the cursor at index 32 of the plot data.
CWGraph1.Cursors(1).PointIndex = 32
End Sub
I hope this helps,
David

Graph xy move cursor programmability

Similar Messages

Maybe you are looking for