Cursor problems with Photo shop Elem.9 on windows 7

Help, can any one help me I have been operating Adobe Photoshop Elements 9 on Windows 7 for about a year and have found it very good but suddenly If I want to use tools such as Crop. Stamp etc I get THREE icons displayed which makes it impossible to use, I have run the updates but nothing has changed. I ALSO have P.E. 9 on my lap top which runs on Windows Vista and there is NO problem on my lap top.

I suspect it may have something to do with your monitor settings. Go to the control panel and check dpi scaling under Appearance or Display.
It’s not uncommon to see a setting of 125% or higher to improve screen readability but PSE requires a dpi of 96 or 100%
Whilst the Editor Menu will appear at 120% to 149% the Organizer Menu (and the advanced button in downloader) won’t. Sometimes the mouse or tool cursors are distorted.
Try a setting of 115% to 120% otherwise use 100%. A common display resolution, notably for notebooks/laptops, and netbooks is 1024 x 768 but PSE requires a screen height of 800 for full functionality. If your height resolution is out of the range 768 to 800 try experimenting with the slider/settings.

Similar Messages

CS6 Master Suite problem with Photo shop

I have a new macbook pro ( mid 2012 ) and it has the intel core i5 processor. I just installed the CS6 Master Suite and everything works fine except for Photoshop. I get the message : You can’t open the application “Adobe Photoshop CS6” because it is not supported on this type of Mac. Any ideas? Thanks

Thank you for your response. Yes it meets all the system requirments. As a matter of fact I had I had this same software installed on another macbook exactly like this one and had no problem with it. That's why I just don't understand why I'm having trouble on this one.

Mouse cursor problem with CS4 64 bit under Windows 8.1

When using tools such as the various lasso tools, I get three cursors in a horizontal line, the leftmost one being the active one. Then when I click in a panel, it turns into a hieroglyph resembling three small vehicles or boats in a line. I don't know if this is related to the reputed bug that plagues gamers using Win 8.1. Any suggestions greatly appreciated.

I seem to have solved my problem and give the solution for the benefit of anyone else encountering it.
I had right clicked on the Desktop and selected Screen Resolution. I then clicked on 'Make text and other items larger or smaller' and moved the slider to the right to make the PS panels larger.
This seems to have caused the problem, and I overcame it by returning the slider to the central position and then reducing the screen resolution to bring the panels up to the desired size.

Facing issues with photo shop cc

Hallo, I have a problem with photo Shop CC:
When I try to write a text on top of a photo the screen goes black and flickers?
Am I doing something wrong?
I uninstalled the progran earlier on today and downloaded it again but the problem is still there...
Marleena

Click on Edit in Photoshop menu and choose Preferences->Perfomance. Click on Advanced settings and change drawing mode to Basic.
If that does not work, deselelct Use Graphics processor.

I finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

In the iPhoto preferences verify that yo have the correct print products country selected.
Do you have any firewire software such as Little Snitch?
Is your internet connection working ok?
LN

Problem with Photo Booth backdrops

In addition to the problem of the first page effects constantly cycling, I now discovered a serious problem when trying to use backdrops. After I select the backdrop I want to use, it will appear in the main window, but it will not place my picture in the backdrop. In addition, it will merely flash the "please step out of the frame" message for a split second and then immediately say "backdrop detected." When I then snap the photo, all I get is the backdrop. I have deleted the .plist file, but that did not help. I had previously uninstalled and reinstalled the application, but the problem persists. Has anyone else experienced this problem, and, if so, have you found a solution?

I thought this issue had died and passed into oblivion. Either no one has an answer, or no one gives a ****,or both. Certainly not Apple. I seem to remember sending feedback to Apple long ago, but I never received a response. I just went to the feedback page and there isn't even a Photo Booth app. showing through which to submit feedback. Checking some of the other threads on this issue, it appears that this problem with Photo Booth has existed for quite some time, and there was a problem with placing iChat backdrops too. It seems that this app. is such a piece of crap that Apple will no longer support it. I can't understand why they continue to include it as part of the OS.
For what it is worth: I was recently at the Apple store and out of curiosity tried the app. on a MacBook Air. It (the app.) was so unstable that I didn't even bother to try to set a backdrop. I've lived without Photo Booth until now, so I guess I can continue to exist without it.
By the way: I didn't insert the asterisks. I typed d a m n, and the system inserted the ****. Interesting.

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Can I remove photo shop 3 using windows add and remove after transfering photos to elements 10

can I remove photo shop 3 using windows add and remove after transfering photos to elements 10. Will I lose any of these photos in elements 10?

Yes you can remove it and your photos will not be removed. Un install it from add or remove or from the start menu.

Timeline some pictures turned 90 deg. with Photo shop and premier elements 13 Happens whin pictures are add to premier Elements 13

Happen when images are added to Premier Element (add medium) from photo shop 13 to Premier Elements 13
I can right click on each rotated pictures and correct the rotation.
Burned a great DVD after spending a lot of time correcting the rotation problem
I used the HVACD OPTION. Made a high quality DVD Bill Olson

I want to thank you and Bill Hunt for your prompt replies. However I don’t think they are on point. My problem is not with a single photograph but entire project consisting of many photographs, transitions, music, etc. I actually imported two such projects into my video project in Premier Elements. One cam in perfectly. The other however, was bollixed up. It played fine in Elements, but when I reviewed it in Premier, the music shifted two frames forward, and one picture came in sideways. There may be more, but these problems alone frustrated me from checking further. The companion project imported without a hitch and plays as designed. All photos from both projects were taken on the same trip with the same two cameras.
Again, thanks for your time. If you have any ideas, I would greatly appreciate ;your input.

Hand cursor problem with safari Mac os

Hi,
I have use movieclip objec in flex , set properties i.e mouseChildren=false, buttonMode=true for ButtonMode and Handcursor , Its work fine in Windows Os with IE,Opera,Safari,Chrome,Mozilla But Issue with Mac-OS wtih safari browser , Handcusor is not visbile on Movieclip instance.
Any idea how to fix this ?
Thanks In Advanced.
a

I am also having the same problem with movieclip objects made in Flash with buttonMode set to true and useHandCursor = true; The same files show the hand cursor on older versions of Safari. Does anyone know any workarounds?
Here is a link to the project I noticed it on. The "Play","Cover", "Tracks" buttons, etc. should show the hand cursor:
http://www.charleslehnert.com/the_slip_new

Cursor problems with Photo shop Elem.9 on windows 7

Similar Messages

Maybe you are looking for