Curtain image does not appear in Curtain Mode

Although, ARD 3 has been touted to put up a nice red curtain image in place of a lock whenever Curtain Mode is implemented, for some weird reason, all I keep getting is the lock image.
Is it just me, or is everyone experiencing this?
Does anyone know a solution..?
Thanks to Steve I've managed to overcome the custom Locked Screen Picture issue in ARD 3 (http://discussions.apple.com/thread.jspa?messageID=2221150&#2221150) but it would be nice to see the curtain as well.
Thanks in advance!
PowerBook G4 Mac OS X (10.4.3)

ARD does not put a curtain up. It will only put a lock up. Butl the curtain idea is still there in that it will let you still work on the computer so the user can't see what you're doing.
I was at Apple HQ this week and they demo'd this feature and the demo didn't have the curtain either. I think they just didn't implement the curtain image.
There may be a hack to implement it but I haven't been pressed to figure it out yet. An idea would be to replace the lock image resource with a copy of the curtain image resource and call it the same name as the lock image resource. It may not work and might show up incorrectly. (not full screen)

Similar Messages

Custom button skin with scaleGrid 9 slice image does not appear in Design Mode

So in a custom button skin I have a nine sliced image, and then throw that onto an MXML page. In design view, I cannot get the component to show the image that I've thrown on it. Unless I do a hack on the MXML page by adding the image in it's scaleGrid form to the page somewhere. Then it seems to act as like a preloader for the image so it actually displays. But I don't want to do this hack on every page that uses this component. Is there a work around?
Here's the button skin:
<?xml version="1.0" encoding="utf-8"?>
<s:Skin xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    width.disabled="296" height.disabled="73">

<fx:Metadata>
                    [HostComponent("spark.components.Button")]
                    [Embed('assets/art/shared/[email protected]', scaleGridTop=20, scaleGridBottom=85, scaleGridLeft=40, scaleGridRight=60)]
</fx:Metadata>

<s:states>
                    <s:State name="disabled" />
                    <s:State name="down" />
                    <s:State name="over" />
                    <s:State name="up" />
</s:states>
          <s:Group width="100%" height="100%" >
<s:Image width="100%" height="100%" smooth="true" source="@Embed('assets/art/shared/[email protected]', scaleGridTop=20, scaleGridBottom=85, scaleGridLeft=40, scaleGridRight=60)"/>
</s:Group>

          <s:Label id="labelDisplay" left="10" right="10" top="2" bottom="2" horizontalCenter="0"
                               maxDisplayedLines="1" textAlign="center" verticalAlign="middle" verticalCenter="1"
                               color="#FFFFFF" >
<s:filters>
                              <s:DropShadowFilter distance="0" angle="90" color="0x000000" alpha="1" blurX="2" blurY="2" strength="16" quality="3" />
</s:filters>
</s:Label>
</s:Skin>
And then I throw that button into an MXML page. The image doesn't show up in design view.
<s:Button x="330" y="94" width="134" height="57" label="Button" skinClass="features.shared.NineSliceButtonSkin" />
This hack, fixes the button! And all other buttons that use that skin.
<s:Image width="100%" height="100%" smooth="true" source="@Embed('assets/art/shared/[email protected]', scaleGridTop=20, scaleGridBottom=85, scaleGridLeft=40, scaleGridRight=60)"/>
<s:Button x="330" y="94" width="134" height="57" label="Button" skinClass="features.shared.NineSliceButtonSkin" />

Looking for an answer too!

About Help image does not appear

RoboHelp X5.2 Webhelp output
A logo created as a jpg to be used as an About Help button
will only appear when compiled on my hard drive.
I got rid of the powered by Robohelp button and created a
company image in jpg format for the About Help button.
In my project I double-clicked on the skin, and then the
About Button, selected the jpg for the About Button image, selected
a gif to use in the About Help dialog box, added company
information, company name, etc.
Part of skin code ----------------
<toolbaritem mode="Logo Mode" type="built-in-logo"
id="7">
<name>About</name>
<image>selected:napa_logo_blue.jpg?</image>
I compiled to my local drive. Everything works. The jpg logo
appears on the top right-hand side, and when you click on it, the
About Help dialog box opens with the gif image and other
information.
However, the development team compiled the help along with
the application to one of their test boxes. The jpg image does not
appear. Instead, a small white box with a red x and the words About
Help appears. When you click on this the About Help dialog box
opens with all the correct information including the gif image.
Both images reside in the skin folder on my hard drive. When
I compile the project they reside in the main folder with all the
htm files and js files.
Not sure how to resolve this.
DM

I am also having this problem. I've just converted a project
from RH X5 to RH v7. In X5 the .gif file attached to the About
button worked fine. In RH 7 nothing appears. I've tried adding the
.gif to the Baggage files but it's still broken. Any other
suggestions?

Image does not appear in applet.

I am reading the book, Teach Yourself Java in 21 Days.
There is an example in Ch.11 that shows how to load an image into the applet.
I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
Here is the code I am currently using from the book:
import java.awt.Graphics;
import java.awt.Image;
public class LadyBug2 extends java.applet.Applet {
     Image bugimg;
     public void init() {
         bugimg = getImage(getCodeBase(),
             "ladybug.gif");
     public void paint(Graphics g) {
         int iwidth = bugimg.getWidth(this);
         int iheight = bugimg.getHeight(this);
         int xpos = 10;
         // 25 %
        g.drawImage(bugimg, xpos, 10,
            iwidth / 4, iheight / 4, this);
         // 50 %
         xpos += (iwidth / 4) + 10;
         g.drawImage(bugimg, xpos , 10,
              iwidth / 2, iheight / 2, this);
         // 100%
         xpos += (iwidth / 2) + 10;
         g.drawImage(bugimg, xpos, 10, this);
         // 150% x, 25% y
         g.drawImage(bugimg, 10, iheight + 30,
             (int)(iwidth * 1.5), iheight / 4, this);
}I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
The image file's name is: ladybug.gif
The code in the html file:
<HTML>
<HEAD>
<TITLE>Lady Bug</TITLE>
</HEAD>
<BODY>
<P>
<APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
</APPLET>
</BODY>
</HTML>
I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
Thanks in advance.
I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
Message was edited by:
gnikollaj

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

SVG image does not appear in mobile version but does in desktop version

Hi,
I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having.
I have used Illustrator to create the following logo image that I save out as an SVG file:
As you've probably guessed, I have used clipping mask to insert the marbly purple image into the shapes and text (this may be relevant to the problem, I don't know).
I then save it out as an SVG with the following details as advised by Adobe:
Then moving into Muse, I File > Place the SVG file. 'Unable to generate thumbnail' comes up in both desktop and phone versions:
Regardless, I uploaded to FTP post to my website. While the SVG appears perfectly on my desktop browser, it does not show at all on my phone browser:
This is not only happening on my phone, I have visited the same website on multiple phone devices and still the SVG image does not appear. Any ideas why this is happening?
Have I totally missed something about file formats for mobile browser versions in Muse?
Also- in illustrator, I saved the SVG logo for the mobile version as a SMALLER SVG than the one I saved for the desktop version.
Thanks

Use a PNG file. I see nothing in your logo that would warrant using anything else. You're not scaling it, there is no interaction and all you are doing is masking out some data that is pixels already. Pardon me, but using an SVG makes no sense at all. Beyond that one would need to see the file, but my guess would be that the "responsive" setting once again embeds some garbage data. Wouldn't be the first time...
Mylenium

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT4623 person contact image does not appear while on a call,why?

person contact image does not appear while on a call,why?

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

Folio Producer Thumbnail List Thumbnail image does not appear.

Folio Producer Site > Folio Producer Editor
Thumbnail view from the list,
Thumbnail image does not appear.
Why is that?

HTML articles and InDesign articles that use JPEG or PNG image format display thumbnail images in the Folio Producer Editor. However, no thumbnails appear in articles that use the PDF image format.
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-12e05bfc12f6c86d767-7 ffe.html

After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4

after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?

In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

HT201401 While calling a contact his image does not appear it appears only when he calls me

While calling a contact his image does not appear on the screen but when the same contact calls me his image appear on the screen

Hello,
I never drag the group list to mail.
I just type it's name and Mail brings it automatically.
I really don't see the point of starting do what you suggested as it complicate the work flow (using 2 applications to achieve a missing feature...)
I think the point is to simplify things and not complication them.
I need Mail to be flexible, so I can add as many groups or one by one contacts without having the need to use another application and drag from there.
How come no one has thought about that?
very strange and frustrating to know it's not existed in mail.
but thanks anyhow
by the way,
when such a feature missing, does it goes to apple features requests?
shlomit

Product Branding Image does not appear

Hi,
I created a simple OA page.
Added 'productBranding' to the 'PageLayoutRegion'.
I set the value of Image URI to FNDTAPPBRAND.gif as mentioned in the "Search" Tutorial.
When I run the page,the image does not appear.
Only the image associated with the Corporate Branding apear on the page
How can I solve it?

You need to check the profile FND : Branding Size, if it is set to Regular or Medium we render the product branding image. If it is set to small then you need to define a formatted text which will be displayed to save the space. There are other ways of setting branding, read the Branding information in the dev guide.

Poster image does not appear in IE

I am having another problem with the poster image feature. In IE7 & 8, the poster image does not appear at all when the player is first loaded. If the page is cached and loaded, the poster image appears fine.
I think this is a bug, but can anyone confirm seeing this or fixing it?
Thanks!

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

Image does not appear across all browsers

On the main page, just below the "Available soon for..." there is an order now button. It only appears with Safari. I've tried Firefox, Chrome and IE and the image does not appear on any of those. The thing that gets me is that the image was there before and worked fine, all I did was make it bigger and relink it, so I'm confused why all of a sudden it doesn't show up.
Thanks in advance for any assistance.
http://turtlecell.com
Message was edited by: hcblue

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Image does not appear when publishing...does it matter where you import audio?

I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
Thank you...

Rod -
Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
Weird, but at least it is working.

Curtain image does not appear in Curtain Mode

Similar Messages

Maybe you are looking for