Curved line - curved on both sides?

I'm trying to create a line that bends for a diagram about piping. when I create the line and in the Stroke options - choose round corners, or outline the path and use the "round corners" effect - the corners are rounded on the outside of the bends but not the inside as you can see below. Can anyone help me to create rounded corners on both sides of the bend? Many thanks in advance!

have a peek at this:
on the left, the corner radius (the red line) is enough to create a curve on the inside of the stroke. on the right, it isn't large enough.

Similar Messages

How do you project onto both sides of a 3d model?

Hi,
If you have a 3d model and you create a new layer, paint a line on that layer then merge down to project that onto the 3d model. Is there a way to have that project through the 3d model so that the line apears on both sides? This is pretty much a standard feature in every 3d painting software I have ever used, so I am sure there is a way but so far I have been unable to find it.
Also is there a way to quickly toggle Paint falloff (on and off)?
Thanks in advance

Hi Mylenium,
Thanks for the reply!
Really disapointing that this feature is not avaliable, it really is a massive time saver and seems odd that it would not be included. I am not really sure who the 3d painting features are aimed at, at the moment, as it feels incredibily primitive,I mean in comparision to other 3d painting software it seems really bare bones.
I currently use photoshop every day at work (and have been for many many years 10+) but the lack of good 3d painting tools in photoshop is really beginning to make me question if photoshop has a future in videogames development, as I find myself using other programs more and more and photoshop less and less, which is a shame as I like photoshop, but there will come a point where having photoshop will just not be cost effective for the amount its used. New software like 3d coat, mairi, substance painter, etc. are really making photoshop seem very dated in the 3d field, I really wish they would spend more time in this area.
Thanks for taking the time to answer, shame its not better news.

Ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but fro

ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

How to light both sides of a curved surface patch

Hi,
I made a B Spine patch and used GeometryInfor and NormalGenerator to get GeometryArray. Everything worked fine except only one side of the surface was lit. Is it possible to generate normal for both side of the surface using some J3D utility. I know how to write code to do it myself.
Thank you very much.
wz

I had two shapes in mind, one with the normals pointing in the original direction and the other one with normals pointing in the opposite direction. But as I am writing this, I am wondering if it wouldnt be possible to use just one shape and duplicate each triangle or quad in the geometry array. Maybe it would even be an option to use an indexed array and just double the indexes (reuse the points). I have absolutely no idea about the implications for performance, but I am looking forward to your findings.
alain

Getting PO account assignment on both sides of the GR/IR accounting doc.

When the GR/IR accounting document is created in our system for a PO item that is account assigned to an order, network or cost centre, the following occurs. On the Goods Receipt, the GR/IR account does not capture the cost assignment on the GR/IR posting. On the Invoice Receipt, the GR/IR account posting does include the cost assignment on the GR/IR posting.
For Example:
MIGO posting generates this accounting entry
Debit Expense account, Order 12xxxxxx          $100
Credit GR/IR account                                          $100     (no order on GR/IR line)
MIRO
Credit Vendor                                                    $100
Debit GR/IR account, Order 12xxxxxx              $100 (order is posted with GR/IR line)
Although the GR/IR account is a balance sheet account, is it useful, for a reporting task, to have the cost assignment included in the financial posting for both GRu2019s and IRs, but it only appears on the IR side.
Is this something that can be solved by MM configuration?
Comparing posting keys 86 (IR) with posting key 96 (GR) u2013 the cost objects we used are set as optional for both those keys, so it doesnu2019t appear to be posting key configuration.
Note: When the PO item is assigned to a material (GR to inventory) the material appears on both sides of the GR/IR postings in Accounting, which is what we want for items account assigned to orders, networks, and cost center too.
Thank you. Alvin.

Thanks, but we still get the account assignment posted to GRIR during MIRO (as shown in Alvin's original post) so the full explanation cannot be the fact that GRIR is a balance account.
Essentially, we would like GR and IR-events to pass the same account assignment string to GR/IR, except posting key.
Thanks for helping.

Both side chatting with simple GUI ,,helps pls?

guys I'm Java application programmer i don't have well knowledge in network programing ,,my question ,,,from where should i start to design a simple GUI client*s* server chat program ,i mean some thing like simple yahoo messenger the program should include also adding contact and make that contact appears ON if he login or OFF if he sign out like red color for ON-line contact and and white color for off-line contact ...........
another thing that chat system should include shared folder all the contact can enter it and upload file or download file ...
please guys i run to you to help me i have 2 weeks only to do that thing please don't let me down i need your help ....TIPS,code,any thing full code :) ,,any thing will be really appreciated .
guys for more information the program includes only the chat of course its both sides chat between the clients and these is no conference room
or audio or video nothing ,,just text only nothing else except the folder shearing service and the colors of the contacts for login or not .
guys once more help me give me codes or any thing useful i count on you guys.
thx a lot in advance
RSPCPro
Edited by: RSPCPRO on Oct 3, 2008 6:25 PM

RSPCPRO wrote:
Dude , u r right ,,,but still its simple GUI issueI'm not sure why you are getting this impression. It's not a simple "GUI issue." Yes, you can simply create the GUI for this, but will it be functional? No. Furthermore, if it was so simple, why are you posting asking for help?
For an instant message chat program, in addition to GUI programming, you need to know how client / server systems work and you need to implement one. A server should be running on one system and the client(s) will connect to it. The server usually maintains the buddy list and passes the messages to/from different clients. This presents several problems that you will need to solve:
1. How will you develop a protocol between the client / server for communication?
2. How will you authenticate users?
3. How will you maintain the buddy list on the server (data structure, database, file)?
4. How will you pass messages from one client to another (simple string message, serialized data object, etc.)?
5. etc.
Now, I'm not saying this is "impossible" so please don't take it that way. I'm simply trying to help you realize that there are a lot of factors to consider when developing this type of application.
RSPCPRO wrote:
and for the "FTP?" ,,,its folder shearing as i said earlier every one of your friends can access it not FTP .....Talking about "folder sharing" is a whole other issue. What I meant by saying "FTP?" is, how do you plan on implementing "folder sharing" remotely? One option is FTP. How would you do it?
RSPCPRO wrote:
and one thing please don't assume any thing u don't knowIf you ask a very broad question and ask for code, I can only assume one thing.
RSPCPRO wrote:
be cooler with others and u will get what u want.I agree. You should take your own advice. I'm not the one looking for help, you are.
RSPCPRO wrote:
thx dude for ur advice and for the link have a good day.You're welcome, and good luck.

Printing on both side of the form page front and back

Hi experts,
             while developing a purchase order i have come across a requirement to print on both sides of the page on the front side i wont to print the normal calculation and on the back side i have to print the terms and condition of the company what should i do for this please help.i have already created the PO which has to be printed on the front side just i wont how to print even on the back of the PO,Should i create a new window or should i go for a seperate smart form.
Thanks
Sumeet Malhotra

1. Assign next page of first page to terms and condition page. and assign terms and condition page to next Page. Goto terms and condition page attributes and uncheck the counter button.
In Case the printing ends of only in first page then put a command line with condition based on your requirement to trigger the Terms and condition page.
ex: page1 -> first page
      page2 ->second page
     terms-> terms and condition page.
assign Page1->terms
    and terms->page2 (Uncheck the counter)
    and page2->terms

Transparent design with router on both sides?

I am looking to solve a design which has to work in two scenarios. Preferably with an in-line solution.
1. Transparent design with VRF on both sides:
FW-VRF (Subnet A)
      |
      | (VLAN 11)      | ACE (Subnet A)
      |
      | (VLAN 12)
      |
LAN-VRF
      |
      | (VLAN 13)
      |
Real servers (Subnet B)
2. Transparent design in plain bridge mode
FW-VRF (Subnet A)
      |
      | (VLAN 11)      |
   ACE (Subnet A)
      |
      | (VLAN 12)
      |
Real servers (Subnet A)
As mentioned, I am aiming for a single design for both scenarios. A routed design will not pass in the first scenario and a one-arm solution will be inefficient in the second scenario. (both due to existing infrastructure) Is it possible to solve this with a transparent solution in both scenarios? I can't seem to get it to work.
Thanks in advance for any help!

I'm gonna expand my question a bit as I can not seem to get a working config in scenario 1. From the ACE I can ping the VRFs on both side of the ACE. I can on the other hand not ping neither the bvi-address of the ACE nor one VRF from the other. Can anyone notice any immediate errors in my config? Thanks in advance for any help!
Addresses:
10.3.66.1 - FW_VRF on client side
10.3.66.6 - LAN_VRF on server side
10.3.66.7 - BVI if on ACE
===Admin===
resource-class TEST_res
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-mz.A3_2_0.bin
hostname 4710Appl
interface gigabitEthernet 1/1
description Management port
switchport access vlan 752
no shutdown
interface gigabitEthernet 1/2
description Client side LAN
switchport trunk allowed vlan 2522
no shutdown
interface gigabitEthernet 1/3
description Server side LAN
switchport trunk allowed vlan 2524
no shutdown
interface gigabitEthernet 1/4
shutdown
access-list BPDU ethertype permit bpdu
access-list ALL line 8 extended permit ip any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
4 match protocol snmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
description Management VLAN
ip address 10.7.52.63 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1
context TEST_context
allocate-interface vlan 752
allocate-interface vlan 2522
allocate-interface vlan 2524
member TEST_res
context TEST_context_routed
username admin password 5 $1$bale5EiS$bEdquz.bbcW3wRcfeSzbu/ role Admin domain
default-domain
username www password 5 $1$bsOdgxav$1uywtkwFEj3QalKaOTrkZ1 role Admin domain de
fault-domain
ssh key rsa 1024 force
===Application context===
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
ip address 10.7.52.64 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 2522
description Client side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface vlan 2524
description Server side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface bvi 1
ip address 10.3.66.7 255.255.255.240
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1

There is a dead area in the center of the display. Display is normal on both sides. Cursor will cross it but disappears when going through it. Has anyone seen this?

I have a dead area in the center of the display in the form of a vertical line about 1/2 inch wide. The cursor disappears when passing through it but is visible on both sides. Display is normal on both sides. Anyone seen this before?

Might want to run the Apple Hardware Test just in case.
Intel-based Macs: Using Apple Hardware Test

Pixelated screen on both side of the screen

I have an issue with my iphone 4S, and I'm not sure what to do.
The screen on both side look pixelated (as if it was the resolution of a iPhone 3G)
It's not a big issue, but I want to get it fixed.
I've tried rebooting it, and it doesn't seems to fix anything.
What could've cause it?
Eariler in the morning, I had about 85% of battery left on my phone.
I went thru a whole day w/o using it, later finding that I can't turn my phone on.
I took it home and tried charing it.
It had 38%, so it drained a lot of battery...
Give me some advice!
Should I put it in the freezer? Or put it in the oven?
Or is it more like a software issue?
GPU issue?
Thank you!

1. Assign next page of first page to terms and condition page. and assign terms and condition page to next Page. Goto terms and condition page attributes and uncheck the counter button.
In Case the printing ends of only in first page then put a command line with condition based on your requirement to trigger the Terms and condition page.
ex: page1 -> first page
      page2 ->second page
     terms-> terms and condition page.
assign Page1->terms
    and terms->page2 (Uncheck the counter)
    and page2->terms

HP Color Laserjet 2550n has no more printing on both sides

In 2005, I bought an HP Color Laserjet 2550n to go with my laptop. I had no printer problems. I loved the feature where I could print a document on both sides of the paper. The option would show up on the properties menu on the print document dialog window.
Over the past summer, I lost my laptop to a crash and had to get a new laptop using Windows Vista OS. I hooked up the printer using the USB port and all seemed good until I tried to print on both sides. In the properties menu of the printing dialog box, the option has disappeared completely! I tried updating the drivers - didn't fix it. I tried reinstalling the software that came with the printer, but Windows Vista OS wouldn't accept it. Help! I don't know what else to do. I appreciate any help.
I have also tried Bob_Headrick's advice on Vista Duplex Printing Troubleshooting Guide for "No option for two-sided printing." The option appeared in the properties menu, but the printer still did not print properly.
Musicredsubaru
Message Edited by musicredsubaru on 10-12-2009 08:18 PM

Sorry guys................I answered my own question.
I went into the HP P2015 user guide & found the answer. on page 32.
I went into printer properties, device settings, noticed that duplex unit for printing on both sides was showing as "not installed". I changed this to "installed", and it worked.

I have 2 inches of empty space on both sides of the screen on all websites when using firefox. How do I get webpages to fill the screen?

All my webpages on firefox have about 2 inches of empty space on both sides of the screen, but on Internet Explorer there is much less empty space or mostly none at all. How do i fix this?

I can't make out from your low-res screenshot what those gray images in the menu at the left are, but I do not see them and there is nothing int the page source that accounts for them.
*http://www.womensonlinebusiness.com/about-WomensOnlineBusiness.html
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Report for G/L line items with both debit & credit posting accounts

Hi,
My client requires a G/L line items report. It can be possible thru fs10n or fbl3n etc. But he wants to see both the credit and debit accounts in the same line.
for ex: if I open a expense account and show the report of individual documents, he wants to see the corresponding credit item to which bank/cash account it got credited to.
we showed them to double click on that document and goto document overview. but they dont want in that way.
they want to see all the line items with both postings in the same sheet for all line items.
valuable replies will be fairly rewarded.
thanks,
chaitanya

Hi,
U can use the following TCodes...
- S_ALR_87012287
- S_ALR_87012289
- S_ALR_87012291
But i am not sure if your client will be happy...
This is a very common req and the only solution possible is to have a customized report for the client..
Hope its clear..
Cheers
Raghu

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Direct connections are always best, but if you insist:
Get a Griffin iTrip or replace your radio with one that has AUX inputs and/or Bluetooth.

How can i make a coppy both side with my hp 6500a plus all in one?

how can i make a both sides coppy with my hp 6500A plus all-in-one?

For windows:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02773085&cc=us&dlc=en&lc=en&product=4083977&tmp...
For MAC:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01935823&cc=us&dlc=en&lc=en&product=4083977&tmp...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Curved line - curved on both sides?

Similar Messages

Maybe you are looking for