Custom barcode not displayed after changing width

Hi All,
I have a requirement to increase the size of the barcode from 9cm to 10cm in a SAPscript form. Previously we were using the standard barcode BC_128B. Using SE73, you can see the the configuration of standard barcode BC_C128B.
Bar code        Width       Unit
BC_C128B      9,00        CM
ZBC12810     10,00        CM
ZBC12810 is the custom barcode that I created which slightly differ from the standard object (different width and description). I also created a custom device types that is used by the barcode and then included the custom barcode in each one of the custom device types.
The above steps I did to create the custom bar code and device types can be found here: [Traditional Barcode printing for Smart Forms and Sapscript|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
I then changed the barcode defined in the sapscript. The result was the barcode is not displayed anymore and only the barcode text is being displayed.
Your inputs are greatly appreciated.

Hi,
Kindly go through these links below:
How to create a new BARCODE PREFIX (for SAPScripts)
Re: SAPScript with Bar Code
Hope it helps
Regrds
Mansi

Similar Messages

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Home page background photo not displaying after changing out the image

I decided to edit the photo that was my background image for my desktop home page. Now it doesn't load when I access the site from my mobile or iPad even though it is there and displays fine from my desktop.
I have a mobile version of my site with a link to the desktop version included in my navigation menu. I don't have a tablet version of my site.
Any ideas what might be causing this? I'm stumped.

Hey, Thanks Brad. It doesn't seem to be timing out (i.e there is no "processing" indicator in the browser the way it looks if something is trying to load). It gets all settled in and just never brings up the photo. It's a little reluctant to do so on the desktop, but after a half a second it goes ahead and puts it on there.
Additionally, not sure if this is related,... but the text I have on the home page jumps about and is not a mirror image of what I see on the Muse design side. I had to put the text boxes on top of each other to get them to into place when I publish to desktop. They kept trying to go on top of the plane for some reason even though I had them placed just so on the design side. But this started happening before I replaced the image so maybe it's unrelated. Idk
One thing, I wonder: I thought Muse did it automatically, but do I maybe need to optimize the photo for web? Outside of that, the only other thing I can think of to do is to delete the current home page and start fresh. But I'm afraid to do that. I don't know how to do that.
Thanks so much for your help. I will PM a link fyi.

SWF not displaying after changing from Studio 8 to CS4 [was: same not transferred...]

Hello all,
I recently upgraded from Studio 8 to CS4 and on one of my pages I have a .swf as a dependent file with an .htm page, I tried to change that .swf to another the put the .htm page onto the webserver, but its still showing the original .swf and within the details when putting its saying for that .swf(same not transferred)...any ideas would be greatly apprecitated as Im stumpted
thanks,
and yest the swf which Im changing it to has already been uploaded(do I need to reupload this file being that it was originally created with flash 8)?
thanks again
[Subject line edited by moderator for greater clarity]

The method of inserting SWF files has changed completely in Dreamweaver CS4. You cannot simply swap the source file.
Delete the original SWF file from the page, and remove all related code. Then insert the new SWF. You also need to upload expressInstall.swf and swfobject_modified.js from the Scripts folder that Dreamweaver creates in your site root.

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

My iBook will not display after Power up Chime

Please I need Help.
My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
Please help.
Thanks.

Welcome to Apple Discussions Aaron
Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
Post back

Forms not displaying after ATG 7 patch

Forms not displaying after ATG 7 patch., 11i Linux OS.
6241631

Hi;
AFAIK no, i also cant see this info at below doc
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Please check upper note below part and be sure you have all those steps on your issue:
-Known Issues
-Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
-Implementation and User Documentation
Regard
Helios

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

B210a will not print after changing router\modem

b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sql is not working after changing from MsAccess into sql server

Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachan

It will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

Mac Mini login not displayed after screensaver

I have a Mac Mini that routinely (several times a week) will not display the login screen after the screensaver has kicked in. The screensaver is running find (e.g. changing which pictures are displayed) but when you move the mouse to stop the screensaver the photo being displayed freezes and the login (list of users) is never displayed. When this happens it is either hold in the power button or do a remote login to use the command line to force a reboot. This problem has existed for many months (multiple Mac OS X updates).
When this happens there are typically two users logged in. One an administrator and one a regular user with a few limitations. Parental Controls are enabled for the second account.
I tried searching the forum and couldn't find a solution mentioned. I apologize if there is one mentioned. Any help would be appreciated. This is a big issue since this is the machine my young kids use and they're not techie enough to reboot without risking corrupting file systems.
Mac Mini 2.26GHz
Mac OS X 10.6.7
Has one External drive connected and always on
Is set to never sleep (it acts as a server)
Is set to reboot on power outages

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Caller ID on TV not displaying after 500 GB DVR upgrade

As the title states, I upgraded to the new 500GB DVR and added a new HD box (both the new model Motorolas) and the caller id on TV stopped working. It shows that they are both active (went through reactiviation process), but it continues to be displayed on the TV in our bedroom as that is still on the older, gray HD box?? Also, it has been almost a week since I've activated the feature so it's beyond the 48 hour waiting period it may take and I've tried rebooting a few times. Anyone have this similar issue when upgraded to the new Motorola boxes?
Thanks!
Mike

Sorry to hear about that. I have sent you a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Content in the page not displaying in full width

Hello everyone,
We have a EP 2004s SR1 Portal with customized framework page and display theme.
When logged on to the protal, the first page(say home page) was displaying by leaving some width at right of that page (approximately the width is equal to scroll bar width). For remaining pages this is not the case...it is displaying properly i.e displaying with full width covered.
and one more thing is, this is happending in Production and QA machines...For Development machine it is working fine.
Could any one help me in this...
Thanks in advance
Regards
Sunil Chiluveru

In your style.css on line 187 you have this. Remove the max-width.
.section > .content {
    background-image: url('../images/frame/contentBg.png');
    max-width: 800px;
    padding: 4%;
    text-align: justify;
    color: #646462;
    overflow: auto;
Nancy O.

Custom barcode not displayed after changing width

Similar Messages

Maybe you are looking for