Custom button goes missing after click the button in Customer Master
Hi All,
I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA to match my requirment.
Query:
While click the custom button(which i have created in Customer Master) , the subscreen is displayed but the Custom Button is missing.Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer master Etc. buttons going to disable mode while click these button in custome mastar.
Is there any OSS notes to implement OR we required to set up some PF status to match above requirment.
Please let me know.
Thanks,
Sridhar
If I follow you, no. That's the way it works. The buttons are composited with the background so become part of it. I'd rethink the design.
Basically, you don't want the highlights to determine the color of unselected buttons. You'll always have fringes and jaggies. Having a non-transparent color set for the unselected state kind of does what you want, but won't look the best.
Similar Messages
-
My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!). Anyhow, I checked my credit card and it was charged, so I assumed the repair request went through. The next day I received a form email saying my problem was with "Sync with iTunes (Not iCloud) - Data Backup/Migration (not iCloud)" instead of the battery repair. It also says for iPod customers, to send your iPod to Apple - but I had requested the "iPod Coffin" to be mailed to me so I could send it back. Obviously there was an error between the request and what was received, so I'd like to ask Customer Service about it. However, I can't find a way to contact them. When I replied to that form email, I recieved an automated reply saying emails there were not read. Anything online asks me to pay $19 and I don't have the correct issues to request an exception. The closest store is over an hour away or I'd simply go there to ask. What can I do?! Any suggestions you have are much appreciated. Thank you!
PS - The form email also says if I wait 10 days the repair request will be canceled. Does this mean my credit card will be refunded for the $85 battery replacement charge if it is canceled automatically?Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
what the heck, i want to change my security questions but im not getting the emails that allow me to
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97505) -
using
System;
using
System.Collections.Generic;
using
System.Linq;
using
System.Web;
using
System.Web.UI;
using
System.Web.UI.WebControls;
namespace
Region_V_project_workshop
publicpartialclassWebForm5:
System.Web.UI.Page
protectedvoidPage_Load(objectsender,
EventArgse)
protectedvoidButton1_Click(objectsender,
EventArgse)
if you need my webpage code please let me knowBelow is an example of executing a parameterized INSERT statement using SqlClient.
protected void Button1_Click(objectsender, EventArgse)
var connection = new SqlConnection(connectionString);
var command = new SqlCommand("INSERT INTO dbo.YourTable (FirstName, LastName) VALUES (@FirstName, @LastName);", connection);
command.Parameters.Add("@FirstName", SqlDbType.VarChar, 50).Value = textBoxFirtName.Text;
command.Parameters.Add("@LastName", SqlDbType.VarChar, 50).Value = textBoxLastName.Text;
connection.Open();
command.ExecuteNonQuery();
connection.Close();
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Client list keeps changing or goes missing after quiting the ARD
I have group list based on different departments. Recently, the list of client would move around. I often have to fix the list but once I click out of the group list or quit ARD, the list of clients randomly changes or removes the clients from the list group.
Running ARD 3.7.2 on Mavericks X.9.2To stop that, this is what you need to do: If you purchase apps directly on your phone, you MUST File>Transfer Purchases. The itunes content sync is ONE WAY, Computer to Phone. So, buy apps on your phone, File>transfer Purchases, they will automatically be checked to sync back to your phone as well as other apps in your library not on your phone. So, after you transfer, un-check what you don't want on your phone & then hit apply. From that point on everything will remain the way you have your apps arranged.
-
When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
ChrisI could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings -
I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.
I am having a similar problem. I am using Chrome and tried on Mac and on PC but the same. Its not completing my order and on PC saying:
We were unable to process your payment please contact our customer support.......... etc
But strangely its giving a confirmation button again. It gave me this error upon reconfirmation:
PMT_000011 : adbehme, en_IE, There is money to authorize, But no Aurthorize delegated were applicable, 12834289525 -
To Disble the Field in Table Control after clicking Save button
Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
WHEN 'BACK' OR 'UP' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'SAVE'.
fl = 1.
GET CURSOR LINE lin.
ENDCASE.
ENDMODULE. " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
IF tab1-current_line = lin AND fl = 1.
screen-input = 0.
ELSEIF tab1-current_line < lin.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE. "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM -
After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
After clicking the download button, I received the message, 'The item you've requested is not currently available in the U.S. store.
This is not uncommon. Not all apps are available in all stores, just as not all OSx apps are available in IOS. The reasons are many, commercial, legal, copyright, whatever but it won't change your position. If it says not available, then that is the situation.
-
Can we remain in the same state even after clicking submit button?
Hello All,
Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
Expected Result : should remain in the same stage
Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
Please help.The above answer was proved wrong, so please follow this link to get the answer.
http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog -
My firefox crashes directly after clicking the firefox-button
'''1'''. firefox suspended directly after invoke the program
'''2.''' I changed the "compatibility-mode" to "Windows 98/Windows Me"
'''3'''. firefox crashes directly after clicking the firefox-button
-> it opens "Morzilla Crash-Detector"-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working. -
After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .
Hello Wilson@w,
The article linked below details the process of placing your device in recovery mode in order to complete the update.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.
I have exactly the same problem, happy a few days ago. Did you find a solution?
-
I just went on to an app and I decided to come off a while after so I clicked the button and it kept on coming up with siri so I have to turn off my phone and turn it back on to get to the home ,what's up?
Restart the phone
Maybe you are looking for
-
My itunes library in my mac and mac book pro are not the same, depending on which machine I loaded the music on. Isn't icloud and match supposed to solve that problem?
-
selling ipad mini, how do i know what the restrictions passcode is in order to delete all content
-
Password Policy not functioning correctly
Here's my situation, and I hope it is something obviously easy that I missed. Mac Mini Server with 10.9.3 running Server 3.1.2 I have set up Open Directory, and Enabled File sharing in the inital steps to setting up this server. It will be used in a
-
Install iTunes and keep music?
When I first got my iPod, I had to install iTunes to another computer, because my computer was extremely old and pratically useless at the time. Later, I got a new computer, so I reinstalled iTunes to my new one. When it was installed and I hooked up
-
CARO_ROUTING_READ
Hello, I am trying to use CARO_ROUTING_READ FM to get the routing details related to PLNNR number. I am providing the following input as datuv : 01.01.2010 PLNNR :50093636 PLNTY: N PLNAL : 1 When i call the FM using my sample report it is giving sy