Custom Column using Function - How to Continue on Error

I'm using Wolfram Alpha from Azure Data Marketplace API. I'm using a list of Zipcodes in Excel. I've created a concatenated column that merges Zipcode (column a) with "Population for Zipcode & ColumnA" & passing that column to
the Wolfram Alpha function to get back each zipcode's population.
Works great until it gets to a Canadaian zip code, where Wolfram Alpha results with "unable to interrupt input", which I expect.
But, how to you tell PowerQuery to simply proceed to the next line and don't stop when it encounters an error?
Great tool. Thanks.
-Eric Vogelpohl

The easiest workaround would be to filter for only US zip codes before calling to Wolfram Alpha, but if that's not possible, then I would recommend looking at the "try" expression. I'm not exactly sure why it's stopping the full evaluation instead of just
putting an error value in that cell but wrapping the call in a try might help. It's covered in section 1.10 of the language spec:
http://go.microsoft.com/fwlink/?LinkID=320633
I'm happy to dig into this more if you want, especially if you can share the workbook.

Similar Messages

Custom extractors using function modules

Hey all
Does anyone has a document regarding how to <b>Develop Custom extractors using function modules?Step by step method would be great</b>
Also document regarding <b>CTS in BW?</b>
Appreciate it
Thanks

Hi,
See here:
Generic Extractors
Generic data sources
Generic DS
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Best regards,
Eugene

Populating a blob column using insert?

please help,
i have tried populating a blob column using forms,
how can i do it programatically the easiest way.
thank you.
[email protected]

hi jully,
create table demo
( id int primary key,
theBlob blob
create or replace directory my_files as
'/export/home/tkyte/public_html';
declare
l_blob blob;
l_bfile bfile;
begin
insert into demo values ( 1, empty_blob() )
returning theBlob into l_blob;
l_bfile := bfilename( 'MY_FILES', 'aria.gif' );
dbms_lob.fileopen( l_bfile );
dbms_lob.loadfromfile( l_blob, l_bfile,
dbms_lob.getlength( l_bfile ) );
dbms_lob.fileclose( l_bfile );
end;
ako din!
jully manuel
jmanuel@sqlwizard
http://sqlwizard.com

SQL LOADER: how to load CLOB column using stored function

Hi,
I am a newbie of sql loader. Everything seems to be fine until I hit a
road block - the CLOB column type. I want to load data into the clob
column using a stored function. I need to do some manipulation on the
data before it gets saved to that column. But I got this error when I
run the sql loader.
SQL*Loader-309: No SQL string allowed as part of "DATA" field
specification
DATA is my CLOB type column.
here is the content of the control file:
LOAD DATA
INFILE 'test.csv'
BADFILE 'test.bad'
DISCARDFILE 'test.dsc'
REPLACE
INTO TABLE test_table
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
codeid          BOUNDFILLER,
reason          BOUNDFILLER,
Checkstamp     "to_date(:CHECKSTAMP, 'mm/dd/yyyy')",
"DATA"          "GetContent(:codeid, :reason)"
All references are suggesting to use a file to load data on
CLOB column but I want to use a function in which it generates
the content to be saved into the column.
Any help is greatly appreciated.
Thanks,
Baldwin
MISICompany

*** Duplicate Post ... Please Ignore ***

Import From Folder: How to Extract the File Name in a Custom Column.

Hello All
Here´s what we´re trying to do:
We have a folder with csv files named like this:
Sales_2013-02-05.csv
Sales_2013-02-04.csv
Sales_2013-02-03.csv
Sales_2013-02-02.csv
Sales_2013-02-01.csv
And in the csv files there are the sales columns but not the date column.
So we want to extract the date from the file name.
I´ve tried entering = Source[Name] in a custom column, but it adds a "LIST" link, and on a click on expand, it adds ALL file names from the folder in each row, instead of just the needed one.
If we could get the proper file name in each row (from where they got extracted), we could split the column and get the date from there. But I don´t know how put the filename there properly.
Can you help?

This isn't entirely straightforward, but it's definitely possible. What you need to do is to apply all of your transforms to each individual file instead of the combined files. I do that as follows:
1) Use Folder.Files as generated by the GUI to look at the list of my files.
2) Pick one file and do all the transformations to it that I want to apply to all of the files. Sometimes, this just amounts to letting the autodetection figure out the column names and types.
3) Go into the advanced editor and edit my code so that the transformations from step 2 are applied to all files. This involves creating a new function and then applying that function to the content in each row.
4) Expand the tables created in step 3.
As an example, I have some files with names that match the ones you suggested. After steps 1 + 2, my query looks like the following:
let
    Source = Folder.Files("d:\testdata\files"),
    #"d:\testdata\files\_Sales_2013-02-01 csv" = Source{[#"Folder Path"="d:\testdata\files\",Name="Sales_2013-02-01.csv"]}[Content],
    #"Imported CSV" = Csv.Document(#"d:\testdata\files\_Sales_2013-02-01 csv",null,",",null,1252),
    #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
    #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
in
    #"Changed Type"
For step 3, I need to take steps 3-5 of my query and convert them into a function. As a check, I can apply that function to the same file that I chose in step 2. The result looks like this:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    #"d:\testdata\files\_Sales_2013-02-01 csv" = Source{[#"Folder Path"="d:\testdata\files\",Name="Sales_2013-02-01.csv"]}[Content],
    Loaded = Loader(#"d:\testdata\files\_Sales_2013-02-01 csv")
in
    Loaded
Now I apply the same function to all of the rows, transforming the existing "Content" column into a new value:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    Transformed = Table.TransformColumns(Source, {"Content", Loader})
in
    Transformed
Finally, I need to expand out the columns in the table, which I can do by clicking on the expand icon next to the Content column header. The resulting query looks like this:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    Transformed = Table.TransformColumns(Source, {"Content", Loader}),
    #"Expand Content" = Table.ExpandTableColumn(Transformed, "Content", {"One", "Two", "Three"}, {"Content.One", "Content.Two", "Content.Three"})
in
    #"Expand Content"
From here, you should be able to get to what you want.

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

BI IP: How to create a message in custom developed planing function type

Hello experts,
I try to set a message in a ABAP planning function.
I created a own planning function type and implemented the class in ABAP.
Everthing is working fine until here. But how can I create a message which is visible in the report.
Is it just to use the command " MESSAGE" ?
Or do I have to use paramteres of the ABAP class.
I've just implemented the interface IF_RSPLFA_SRVTYPE_IMP_EXEC and cannot find parameters for this.
Thanks in advance
Johannes

Hi Johannes,
please check
Custom Messages WAD
Re: How to indicate a message by a planning function type in an ABAP-OO-Class
Regards Matthias

How to set a custom column in a workflow task.

Hello,
I'm looking for some assistance a bit with how to set a custom column in a Workflow Task.
I have a List Workflow that starts when an item is created in a list. The workflow, platform type SharePoint 2013, starts a new task, Task1, with Content Type 1. This Content Type has a custom column called Age. Once the Task1 is completed a new task, Task2,
with Content Type 2, starts and has the same column Age, as Task1.
How can I populate the Age column in Task2 with the content of the Age column in Task1?
Since I start the task by running "Assign a task to ..." Action I was thinking to copy the Age column from the Task1 to the list item that started Task1, which has a column Age as well, and then in Task2 to start another workflow - which is associated
with the Content Type 2, that would try to read the Age column from the list item that started Task2, which was set once Task1 was competed - I know it's complex but this is how I was thinking.
The problem with this approach is that I can't get a reference to the list item that started Task2 to read the Age from the list item.
Is there a better approach? I use SharePoint Designer 2013 to design all this.
Any assistance is appreciated.
Thank you.

Hello Sebastian,
you can get the Age column from Task 1 and then update the Task 2 Age column with that value. I am not sure why you want to run another workflow on Task 2.
You can perform below steps to set Age column from Task 1 to Task 2.
1. Create Task 1 using Assign a task , wait till the task is completed.
2. Get the Age column value based on Task 1 once the task is completed.
3.Create Task 2 using Assign a task , uncheck wait till the task is completed option.
4. Update the Task 2 with Age column in Task1.
5. Use Wait for the field to equal value , check for Task Status is completed or not.
>>The problem with this approach is that I can't get a reference to the list item that started Task2 to read the Age from the list item.
you can get the related item from task list item to get the main list item.
Other option is, Use Javascript and CSOM in task edit form to get the Age column from Task1 and prepoluate the Age value when Task2 is opened.
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to get custom columns from Database in BO Universe

Hi,
We have 'n' databases. All the databases have identical tables and views but some tables in few database have custom columns.
Ex. 'database1' has table 'sites' with the following columns
       1. sitenumber
       2. sitename
       3. siteaddress
       4. phone
       5. email
'database2' has table 'sites' with the following columns
       1. sitenumber
       2. sitename
       3. siteaddress
       4. phone
       5. email
       6. IsDepot
The condition says that
"If IsDepot field is present in the site table then list sites where IsDepot equals 0 or null otherwise list all sites"
How do i create a condition at the universe level which checks whether the object 'IsDepot" is present in the database or not.
A single universe needs to be created for this purpose

Hi,
We have implemented a solution for the IsDepot problem as mentioned above.
It is not done at the BO Universe level but at the SQL Server database level.
Steps Followed:
1. Created a stored procedure which checks the 'syscolumns' table for available fields
2. The SP creates a temp table with a value list based on previously mentioned conditions
3. This temp table can be used in the universe or a condition can be used to filter data based on this temp table.
Thanks,
Arun

How to register User custom field using PHP?

Hi!
I am looking for a way to share user specific data between connected users. For example, all participants should know each other IDs(our own system IDs, not LCCS).
User's custom fields looks the best solution for this, but I can't find a way to register one using PHP, while creating room.
How to register User's custom field using PHP? Or may be there are better solution to make such things?

Got it, just need to add new node to UserManager collection.
const USER_MANAGER_COLLECTION = 'UserManager';
static private $USER_MANAGER_CUSTOM_FIELD_CONFIGURATION = array(
   'accessModel'=>self::ROLE_VIEWER,
   'publishModel'=>self::ROLE_VIEWER,
   'persistItems'=>true,
   'modifyAnyItem'=>false,
   'userDependentItems'=>true,
   'sessionDependentItems'=>false,
   'itemStorageScheme'=>self::STORAGE_SCHEME_MANUAL,
   'allowPrivateMessages'=>true,
   'lazySubscription'=>false,
   'p2pDataMessaging'=>false
const USER_INVITE_ID_CUSTOM_FIELD = 'inviteId';
static private function createUserManagerCustomFields($room){
   $account = self::init();
   $collection = self::USER_MANAGER_COLLECTION;
   $account->subscribeCollection($room, $collection);
   $account->createNode($room, $collection, self::USER_INVITE_ID_CUSTOM_FIELD, self::$USER_MANAGER_CUSTOM_FIELD_CONFIGURATION);

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to Access Custom Event using AS3?

Hi All,
Maybe it's that its Monday morning and my brain is still foggy, but I can't seem to figure out how to set custom events using AS3.
I have a custom GridRow itemRenderer, and have declared the event using the appropriate metatags.
Then I create the GR item dynamically using AS3 instantiation, but the event is not available for selection in the intellisense drop-down.
Let's take the following as an example:
<?xml version="1.0" encoding="utf-8"?>
<mx:Grid
     xmlns:mx="http://www.adobe.com/2006/mxml"
     xmlns:renderers="com.brassworks.renderers.*"
     creationComplete="componentInit();"
>
     <mx:Script>
          <![CDATA[
               private function componentInit():void
                    newRow     :MyRow     = new MyRow();
                    //newRow.myEvent is not an available option to set
          ]]>
     </mx:Script>
</mx:Grid>
Then the itemRenderer:
<?xml version="1.0" encoding="utf-8"?>
<GridRow
     xmlns:mx="http://www.adobe.com/2006/mxml"
     xmlns:classes="com.brassworks.components.classes.*"
     creationComplete="componentInit();"
>
     <mx:Metadata>
          [Event(name="myEvent", type="flash.events.Event")]
     </mx:Metadata>
     <mx:Script>
          <![CDATA[
               private function itemChanged(event:Event):void
               Alert.show("test");
               this.dispatchEvent(new Event("myEvent"));
          ]]>
     </mx:Script>
     <mx:GridItem>
          <mx:TextInput
               change="itemChanged"
          />
     </mx:GridItem>
</GridRow>
How do I go about setting the handler method for custom events on instantiated items? Do I need to do this via the AddEventListener() method? Does this mean that events aren't exposed in ActionScript like they are in MXML? (In MXML all I have to do is <MyRow myEvent="handler(event)" />.)
Thanks!
-Mike

Yes, I you need to do this via the addEventListener() method.
myRow.addEventListener( "myEvent", myHandler );
I hope that helps.
Ben Edwards

How to call Custom RFC enabled Function Module in R/3 From XI

Hi Experts,
I want to call custom RFC enabled Function Module by sending some input parameters from XI.
How to do this
Thnx
RAMS

Hi RAMS,
1. Under the SWCV Go to the Imported Objects.
2. Right click on the RFC and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword.
4. Select the RFC u want to import.
5. Execute the import and the RFC is imported under the SWCV.
Now u can use this Imported RFC in the scenarios of that SWCV.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

How to use functional global with a large amount of variables?

Hi all,
I'm currently developping a LV program which control and acquired data from a device. Up to now I used global variables ( very conveniente to use for experimental parameters). But now my program is become to be too large and I have too much "global" variables to continue to use a global.vi.
I'm wondering if functional global can help me. If someone has an exemple of how use functional global with a large amount of variables...
thanks

I agree with Ben.
Using queues is better than a number of Globals or Action Engines (Functional Globals). If you need to pass data to a sub-vi, you can simply wire the queue out to a queue control of a sub-vi, or a reference. See attached example of passing data to a sub-vi using a queue. The example is an extremely simple, undocumented tid-bit of code that sends the loop count to the consumer VI.
Run the main program called QueueProducer.vi.
R
Attachments:
QueueProducer.vi ‏18 KB
QueueConsumer.vi ‏14 KB

Which planning function i have to use and how to write this planning fucnti

Hi Bi Guru's,
I have rolled out BW SEM-BPS Planning Layout's for the Annual Budget in my organistaion.
There are two levels of layout given for the each sales person.
1) Sales quantity to be entered Material and country wise for all 12 months ( April 2009 to March 2010)
2) Rate per unit and to entered in second sheet, Material and country wise for the total qty entered in the first layout.
Now i need to calculate the sales vlaue for each period and for the each material.
Which planning function i have to use and how to write this planning fucntion.
Please suggest me some solution ASAP.
Thanks in Advance,
Nilesh

Hi Deepti,
Sorry to trouble you...
I require your help for the following scenario for caluclating Sales Value.
I have Plan data in the following format.
Country   Material    Customer    Currency    Fiscyear    Fiscper           Qty         Rate        Sales Value
AZ          M0001      CU001          #             2009          001.2009        100.00
AZ          M0001      CU002          #             2009          001.2009        200.00
BZ          M0001      CU003          #             2009          001.2009        300.00
BZ          M0001      CU003          #             2009          002.2009        400.00
BZ          M0002      CU003          #             2009          002.2009        300.00
AZ          M0001       #               USD          2009             #                                 10.00
BZ          M0001       #               USD          2009             #                                 15.50
BZ          M0002       #               USD          2009             #                                 20.00
In the Above data the Rate lines are entered in the Second Layout, Where the user enters on the Country Material Level with 2009 value for FISCYEAR.
I am facing problem with this type of data.
I want to store the sales value for each Material Qty.
Please suggest some solution.
Re
Nilesh

Custom Column using Function - How to Continue on Error

Similar Messages

Maybe you are looking for