Custom Dimension with multiple children defined as "Never Share"

Hyperion Planning - 11.1.1.3
There is Custom dimension "Appliance" with root defined as a "Never Share". It has multiple level 0 (SubAppl1, SubAppl2, SubAppl3 etc) members with "Store". Data is some times loaded at root level and some times at the lower levels and at times both. What is the expected result?
When POV is Appliance and when it is drilled down?
For Ex:
For Jan -
Appliance is 100, No other members loaded with data.
For Feb -
Appliance is 30
SubAppl1 is 10
SubAppl2 is 10
SubAppl3 is 5
POV
Appliance Jan - 100
Appliance Feb - 30 or 25? and why?
Trying to understand the behavior or "Never share" in this scenario.
Appreciate your feedback.
Edited by: 847514 on Mar 28, 2011 11:17 AM

Never Share has no bearing on your sample. The Never Share flag is to prevent a implicit sharing which will happen when you have one parent with a single child under it. Your structure is not setup such that an implicit share would occur based on your example.
I really do not recommend loading data at upper level members as this means you can never run a normal aggregation on your data. If you were to aggregate your data and you happened to have the AGGMISSG set to true you would see the data in your january example of 100 was removed due to the level 0 members not having any values.
So the question of your February being 30 or 25 is did you load 30 to February Appliance or did you load to the level 0 and then aggregate?
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

SSM7.5 - Dimension with Multiple Hierarchies

Hi all,
I'm facing here one problem in the SSM front-end when I'm trying to use one the possibilities that PAS database offers, in this case the use of a dimension with multiple hierarchies.
As you can see in this image, the dimension is created in PAS and works without problems in the dataview.
Hierarchy one:
[http://img121.imageshack.us/img121/334/pas1y.jpg]
Hierarchy two:
[http://img831.imageshack.us/img831/2586/pas2.jpg]
In the SSM front-end, when I try to use that dimension, by default appears the first hierarchy:
[http://img826.imageshack.us/img826/4043/hier3.jpg]
In the dimensional selector the dimension appears fine for the first hierarchy:
[http://img30.imageshack.us/img30/3103/hier1.jpg]
But when I select the second hierarchy...
[http://img34.imageshack.us/img34/1722/hier2.jpg]
The Internet Explorer crashes and close all the open windows. This happens in the scorecard and also in the reports.
Is not possible to use dimensions with multiple hierarchies in SSM? Did anyone had this problem before?
Thanks in advance
Pedro
Edited by: Pedro S. Costa on Sep 13, 2010 11:03 AM

Hi Shashi,
first of all, thanks for your answer.
But I don't understand when you say that "we cannot have two hierarchies on the same dimensions"?!?!?
I already have some years of experience with PAS database and it's not the first time I create a dimension with more than one hierarchy. I use also that in a productive system (before this SSM front-end) without problems. And in this latest version of PAS (version 7.5.6) it's still possible to use that feature. As you can see in my initial post, I put two screen shots of the dimension with two hierarchies in PAS dataview, and works fine, without problems in the drill-down/up.
From PAS online help:
HIERARCHY is a Dimension command that defines the members and levels that comprise a particular hierarchy level within a dimension. It also allows multiple consolidation structures that stem from a central root of inputs. Use hierarchies when the input members are consolidated into more than one output member. When a dimension has hierarchies, members can have more than one path for rolling up into output levels. If a dimension has only one hierarchy, no HIERARCHY statement is necessary.
Based on this, I create my example of a dimension (named MULTI) with two hierarchies (REGION and TYPE). Maybe the name I use for the second hierarchy create some confusion to you, because of the TYPE dimension that can exist in SSM. I just hope the problem I'm having in the SSM front-end is not related with the name I used for the second hierarchy!!!!
I will rename that and test again.
Regards
Pedro

Custom Event with multiple EventTypes

Hello All, First thanks for all those who tryied to help me and apologize for my approximative english.
I would like to create the more properly as possible a Custom Event with multiple EventTypes, like the MouseEvent typicaly.
With Some EventType which permit to acces to some attributes and other not. But I'm totaly lost, The second solution if someone knows how, is to explain to me how to do to acces to the code of the MouseEvent.as
Thanks!
Ps: you will find below the basis of the code i have begin.
package fr.flashProject
    import flash.events.Event;
     * @author
    public class SWFAddressManagerEvent extends Event
        public static const CHANGE_PAGE:String = "change_page";
        public static const ERROR_404:String = "error_404";
        public static const HOME_PAGE:String = "home_page";
        private var _page:String;
        private var _params:Object;
        public function SWFAddressManagerEvent(type:String, pPage:String = null, pParams:Object = null, bubbles:Boolean=false, cancelable:Boolean=false)
            super(type, bubbles, cancelable);
            _page = pPage;
            _params = _params;
        public override function clone():Event
            return new SWFAddressManagerEvent(_type, _page, _params, bubbles, cancelable);
        public override function toString():String
            return formatToString("SWFAddressManagerEvent", "type", "page", "params", "bubbles", "cancelable", "eventPhase");
        public function get page():String { return _page; }
        public function get params():Object { return _params; }

I am not sure what you are trying to accomplish but event can have only single type. Event type is just a string that is typically a constant - exactly like your constants.
When dispatched, each event INSTANCE has only one type. Again, these types are described in a type parameter by a string. Each dispatched MouseEvent DOES NOT have multiple types but ONLY ONE. It does have multiple constants that are used to assign type at runtime as does your event.
If you are talking about multiple parameters, you already do that in your custom event class. You have _page and _params. Nothing stops you from adding more parameters.
Also I am not sure why you need getters for _page and _params.

Dimension Design - Single Dimension with Multiple Hierarchies

Morning,
the purpose of this discussion is to understand how we should design a specific dimension with 3 levels and multiple hierarchies for optimal performance.
We have an institution dimension with the following characteristics:
Characteristics
Dimension: Institution
Levels:
1. Total Bank (TB) Level
2. Peer Group (PG) Level
3. Institution Level
Hierarchies:
1. Some of the hierarchies have 3 levels and others have only 2 levels (Skip Level)
2. ALL the hierarchies have a TB level and an Institution level
3. None of the hierarchies have the same leafs
4. Some of the hierarchies leafs can overlap
Design:
We are considering two approaches for the institution dimension levels:
a)
Levels:
Hierarchy 1 TB Level
Hierarchy 1 PG Level
Hierarchy 1 Inst Level
Hierarchy 2 TB Level
Hierarchy 2 Inst Level
Hierarchy 3 TB Level
Hierarchy 3 Inst Level
Note:
This approach is working and the resulting dimension and cubes are used by OBIEE, but some of the OBIEE analysis takes a long time (more than a minute) to return the results.
At this point, we are not sure whether this approach will result in an optimal design from a performance perspective and are looking at restructuring the dimension to represent only the three conceptual levels as indicated below.
b)
Levels:
1. Total Bank (TB) Level
2. Peer Group (PG) Level
3. Institution Level
The rest of the dimension i.e. hierarchies, attributes and mappings are defined in the same way.
The cube associated with this dimension have approximately 80 million records.
Please advise on any best practices or design considerations that we need to take into account.
Thanks

No, it is not possible to have multiple hiearchies in a PC logical dimension.
The concept of the Parent-Child (PC) hierarchy is completely different from the level-based hierarchy. Specifically the PC hierarchy expects a predefined / architected table with corresponding PC column/value structuring with or without attributes.
Short story even shorter it is not possible.
Longer...
In the RPD the BMM actually prevents you from adding a new logical level, child level, or parent level when you have selected that the logical dimension be a parent child logical dimension with Parent-Child hierarchy.
On another note...
Have you tried architecting/building your PC source table so that it represents the roll-up and bottom child-levels like you are seeking? That is, that same member in the child column more than once having a separate parent value. That should be doable.
That was a great question, please award points if this answered your question or it was helpful.
Cheers,
Christian
http://www.artofbi.com

BUG: Adding a new parent with multiple children in one transaction

Technology scope: JDeveloper Studio Edition Version 11.1.1.0.2, ADF Business Components.
If you have a master-detail page (where master and detail views are both updateable tables) and you insert
a new master record (without committing it) and you continue with inserting two or more child records you’ll receive
the following error when I commit the transaction:
java.sql.SQLIntegrityConstraintViolationException: ORA-02291: Integriteitsbeperking (PUBLICSUITE.DREXTRL_LANG_DREXTRL_FK1) is geschonden - bovenliggende sleutel is niet gevonden.
ORA-06512: in regel 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:116)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:177)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:3877)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:434)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:7779)
at axi.casemanagement.model.base.CMEntityImpl.doDML(CMEntityImpl.java:62)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6162)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3253)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3061)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2180)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2382)
at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1565)
at oracle.adf.model.dcframe.LocalTransactionHandler.commit(LocalTransactionHandler.java:140)
at oracle.adf.model.dcframe.DataControlFrameImpl.commit(DataControlFrameImpl.java:597)
at oracle.adfinternal.controller.util.model.DCFrameImpl.commit(DCFrameImpl.java:83)
at oracle.adfinternal.controller.activity.TaskFlowReturnActivityLogic.resolveTransaction(TaskFlowReturnActivityLogic.java:509)
at oracle.adfinternal.controller.activity.TaskFlowReturnActivityLogic.execute(TaskFlowReturnActivityLogic.java:114)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:834)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:718)
at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:491)
at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:108)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:86)
at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:43)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:142)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:274)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:74)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:274)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:74)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:754)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:282)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:181)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:102)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:149)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Important notes:
- This error occurs only if you insert multiple children, if you insert just one child in the same transaction everything works fine.
- We have tested this application directly via "Run" BC application module and there everything works fine just like it hast to be.
- Because we have a “Composed” association we don’t need to override the postChanges() method in order to controls the order for saving the entities (regarding the documentation).
- Related to thread: http://forums.oracle.com/forums/thread.jspa?threadID=897936&tstart=30

Gert,
I think Frank's suggestion was that you file the test case with Oracle Support (Metalink) ;)
John

Dimensions with multiple joins

Hi,
Discoverer Desktop 9.0.2
Discoverer Administrator 9.0.2
OWB 9.2
I have imported the dimensions and facts from OWB EEX file.
While I trying to create a report based on the dimensions, I found the problem in Dimensions used multiple times against the fact table.
For example,
I use the Time Dimension (TIME_DIM) for assigned date, open Date and Close dt. My fact table will have the foreign keys for these 3 columns.
TIME_DIM
DAY_ID
DAY_DAY
DAY_MONTH
DAY_YEAR
data
DAY_ID DAY_DAY DAY_MONTH DAY_YEAR
1 01-JAN-04 JANUARY 2004
2 01-FEB-04 FEBRUARY 2004
3 01-MAR-04 MARCH 2004
FACT_TABLE
DAY_ID
DAY_ID2
DAY_ID3
Data
DAY_ID DAY_ID2 DAY_ID3
1 2 3
1 1 2
While I am creating the report, in 'work book wizard: step 2' shows the TIME_DIM only one time, also it allows to select only one time with any one of these keys. Whereas I need to select the time dimension for each of the time keys in fact table.
Is their any work around to get these values in my reports?
I mean
My report will look like,
ASSIGNED DT OPEN DT CLOSE DT
01-JAN-04 01-FEB-04 01-MAR-04
01-JAN-04 01-JAN-04 01-FEB-04
I tried with creating hierarchies, modifying the SQL to add these keys manually and then import SQL, doesnt work at all.
Please help me !!
Thanks,
Shree

You have to load the table up several times into the EUL and create links to the different column in your fact table.

OBIEE Parent-Child Dimension with multiple hierarchies

Is it possible to have in a parent-child dimension multiple hierarchies? I want to have the same botom childs to aggregate to different parrents. example.
Account Dimension
HR1-total
HR1-parrent1
CHILD1
HR1-parrent2
CHILD2
HR2-total
HR2-parrent1
CHILD1
CHILD2
Thanks in advance.

No, it is not possible to have multiple hiearchies in a PC logical dimension.
The concept of the Parent-Child (PC) hierarchy is completely different from the level-based hierarchy. Specifically the PC hierarchy expects a predefined / architected table with corresponding PC column/value structuring with or without attributes.
Short story even shorter it is not possible.
Longer...
In the RPD the BMM actually prevents you from adding a new logical level, child level, or parent level when you have selected that the logical dimension be a parent child logical dimension with Parent-Child hierarchy.
On another note...
Have you tried architecting/building your PC source table so that it represents the roll-up and bottom child-levels like you are seeking? That is, that same member in the child column more than once having a separate parent value. That should be doable.
That was a great question, please award points if this answered your question or it was helpful.
Cheers,
Christian
http://www.artofbi.com

Customer Exit With Multiple Ranges

Hi Experts,
I have created a customer exit for my query. The values from this customer exit are multiple intervals.
I|BT|2005001|2005006
I|BT|2005002|2005007
I|BT|2005003|2005008
Is it possible to pass these interval values to a selection-options variable in my query? What type of variable should I use? Thanks in advance.
Juice

Hi San,
Thanks for the reply. I tried setting the variable as interval but when I run the query in RSRT, i recieve an error message and then it won't display anything.
However, when I set the variable to selection-options, the intervals seem to overlap. Instead of displaying like (as in RSRT ABAP Debugging mode):
I|BT|2005001|2005006 -> Jan 2005 to June 2005
I|BT|2005002|2005007 -> Feb 2005 to July 2005
I|BT|2005003|2005008 -> March 2005 to August 2005
It displays Jan 2005 to August 2005 in the query.How can I correct this? Please help. Thanks.
Juice

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

Writing a custom component with multiple fields.

Does anyone have some pointers on writing a custom component that properly handles multiple input fields?
An example usage might be as follows:
Assume the following java classes:
public interface Address {
//... getters/setters for Address.
public class Company{
Address getAddress(){...};
}The tag usage might be something like the following:
<custom:address value="#{myCompanyBean.address}" />
Extending UIComponentBase I can easily render the output and create all the needed input elements. I'm also able to properly retrieve the submitted values in the decode method. But I'm unsure how to handle the "UpdateModelValues" step. Do I simply over-ride processUpdates, or is there more housekeeping to be done?
Thanks.

I'm guessing that doing addChild inside createChildren causes an infinite loop.
Why aren't you just doing this with MXML? it would be a lot simpler.

Custom LayoutSet with multiple Menus

Hello All -
I am trying to implement a custom layout set that will contain the basic tree\list layout but have 3 menu's
1. Standard Menu Bar Control
2. A Button Menu
3. A Link Menu
I have been playing with my layout set and see you can get the menu bar from your layout set configuration using the lines..
ControlFactory cf = ControlFactory.getInstance();
Control c = null;
com.sapportals.wcm.repository.IResourceContext context = getProxy().getResourceContext();
c = cf.getControl("MenuBarControl", context)
I am unsure where the String MenuBarControl comes from however and what it would be to get the Link or Button Control...
Thanks in advance for your help on this one.

Hi Brandon
To render the extra two Menu bars you need not define additional Collection renders , because the layout set can identify Menu Bars separately from Collection renders. To have more more Menu Bars you will have to modify the layout set code to something like this ...
private void createControls() {
     this.controls = new Control[5];
     ControlFactory cf = ControlFactory.getInstance();
     Control c = null;
     IResourceContext context = this.getProxy().getResourceContext();
     c = cf.getControl(cf.MENU_BAR_CONTROL, context);
     this.controls[0] = c;
     if (c instanceof IMenu) {
       ((IMenu) c).setProxy(this.getProxy());
       ((IMenu) c).setPushStack(true);
       ((IMenu) c).setGroup(IParameterName.UI_GROUP_MASS_KEY);
     c = cf.getControl(cf.MENU_BAR_CONTROL, context);
     this.controls[1] = c;
     if (c instanceof IMenu) {
       ((IMenu) c).setProxy(this.getProxy());
       ((IMenu) c).setPushStack(true);
       ((IMenu) c).setGroup(IParameterName.UI_GROUP_MASS_KEY);
//repeat again for third menu bar
However I have not tried getting a button into a menu bar. Links are possible as you are aware
Regards
Pran

Custom Infotype with multiple long text fields

Hi,
We have a need to create a custom Infotype (in PA or PD) that will contain more than one long-text area.
I've searched this forum and found that there are generally two approaches :
1. use the HR clusters for long-text and setting the ITXEX field in PA
2. using SAP standard text area (SO10) and functions such as READ_TEXT, SAVE_TEXT, etc.
The problem with (1) is that it can only store one long-text. We need to have many. Please correct me if we can hold more than one long text in the cluster...?
With regard to (2), I'm just not sure that this is the correct place to store the long text...?
If I was to adopt option (2), could I just use the key of PA9nnn (ie: PAKEY) as the key/TDNAME for STXH?
Are there any other methods to store long text?
As well, is it possible to create a custom Infotype in PD? Can we use PM01 to create PD infotypes?
Thanks,
Raj

Raj
Sorry I'm not much help on the two questions you have raised...you have probably already got answers by now anyway..however FYI check out link below for enhancing PD infotypes (use transaction PPCI).
enhance infotypes

Dimension with multiple leafs

Hello,
We want to set up the following hierarchy:
--- OXN
....|--- POT
....|....\--- RST
....|
....\--- OIN
.........\--- PJT
..............\--- RST
So this means OXN has 2 child levels (POT&OIN)
and RST has 2 parent levels (PJT&POT)
Now when we make this we get the following warning in the consistency checker:
Warning: [38073] Dimension "<dimension_name> has multiple leaf levels which are not identical
Does anybody know how we can solve this?
Thanx in advance,
Remc0

I'd really like to know what causes this error to occur in the first place.
For me I sat down to construct a time dimension.
Single source table. Single drill path...
Added year... Fine.
Added Month... Fine
Added Week... Fine.
Added Day... Failed???
Exactly the same process for Day as for week, month and year but for day I get the error.
If I knew what criteria was being used to identify the error then i could figure out how to get around it but at the moment it almost looks like a bug( in this circumstance).

Customer Report with multiple conditions?

Hello <<text removed>>
I have a project that I am curious if it is possible using BW and BEx Analyzer.
I have a Cube that contains Customer, Brand, Revenue etc....
Lets say i have the following values
Customer: 1,2,3,4,5,6
Brand: 1,2,3
I need a report, series of reports, or a workbook that can provide the following.
a. List and count of customers that purchased $500+ of only Brand 1
b. LIst and count of customers that purchased $500+ of only Brand 2
c. List and count of customers that purchased $500+ of only Brand 3
d. List and count of customers that purchased $500+ of Brand 1 and $500+ of Brand 2
e. List and count of customers that purchased $500+ of Brand 1 and $500+ of Brand 3
f. List and count of customers that purchased $500+ of Brand 1, $500+ of Brand 2 and $500+ of Brand 3.
I think you get the point
This report should look at the previous 12 months of data. And the Customer should not appear on the report more then once because that is how the criteria presented above should work.
I was able to get this to work for a,b,c by restricting a query to the brand and using a condition of $500+ for revenue
I was also able to get this to work for d and e by using the resolution for the single brand as a value set as input for the dealers in a similiar query restricted to a different brand.
Anyway I hope i can find some ideas/approaches that would meet this requirement!
Thank you,
Nick
Edited by: Matt on Jan 13, 2011 9:06 AM

Hi Nick,
See if this works.......
Put customer in Rows.
Create 3 restricted key figures for Revenue one with each brand. gets difficult if you want to do this for many brands...
Create a calculated key fig and use the expression revenue_rkf1 > 500. this expression in the calc key fig returns 1 if revenue is > 500, othewise returns 0. Similarly create 2 more CKFs with expressions using the other RKFs for revenue.
Now report may look like this:
Customer brand1 brand2 brand3
Cust1........... 0.......... 1............ 1
Cust2........... 1.......... 1........... 0
Now add logic to get customers who bought brand 1 > 500 and brand2 > 500 and other combinations. For that create different formulas like brand1brand2, brand 2brand3, brand1brand3, brand1brand2+brand3.
Now report may look like this:
Customer brand1 brand2 brand3 for1 for2 for3 for4
Cust1..........0............1..........1........1......2....1.....2
Cust2..........1............1..........0........2......1....1.....2
cust3..........1............1..........1........2.......2....2.....3
Now create 4 calc key figures. In CKF1 use expression for1 > 1. This checks if value in formula1 is greater than 1, if yes puts 1 otherwise 0. Use the same expression for CKF2 and CKF3 using for2 and for3. Create CKF4 with expression for4 > 2.
Now the report looks like this:
Customer brand1 brand2 brand3 for1 for2 for3 for4 CKF1 CKF2 CKF3 CKF4
Cust1...........0...........1...........1.......1......2.....1.....2......0........1.......0........0
Cust2...........1...........1...........0.......2......1.....1.....2......1........0.......0........0
cust3...........1...........1...........1.......2......2.....2.....3......1.........1.......1........1
Count of CKF1 gives the number of customers who bought brand1 for 500+ usd and brand2 for 500+ usd.
Count of CKF4 gives the number of customers who bought all brands for more than 500 $ each.
The repot gives the data needed but may not look good with number display against customers.
Regards,
Murali.
Edited by: Murali Krishna K on Jan 7, 2011 10:52 AM
Edited by: Murali Krishna K on Jan 7, 2011 11:10 AM

How do I try to create a custom poster with multiple photos?

Each time I try to do a Photo Project and make a custom poster, the software stops working? Has anyone else had this problem? Thanks

hi Motz
it is alot of work., are u comfortible with pse Elements editor?
david :>

Custom Dimension with multiple children defined as "Never Share"

Similar Messages

Maybe you are looking for