Custom infotype data from rec to pa

Dear Gurus
We have some custom infotypes for the applicant, while we perform the hire applicant action, the same infotypes data should be transferred to PA how to do this
Kindly suggest
Thanks
Kumar

Dear praveen
We have 2 custom infotypes, developed for the purpose recruitment , once the applicant is selected and joined, we perform the hire applicant action, then what ever these 2 custom infotypes data, which there is in the recruitment data base, should be transferred to PA data base

Similar Messages

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Unable to extract Customer Master data from MDC

Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
              EUS100
              MDM: Master Data Management
              PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
                             Sender: EUS100
                              Receiver: PI7
                             Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
                    PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
    1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
    2. SM59: I have checked successfully 700PI70CLNT RFC connection.
    3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
    4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
     5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
     6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta.

How to restrict infotype data from SE16 based on country?

Hello.
We're a global company and the US organization wants to view infotype data from the PA tables. At the same time, we are not allowed to view data from other countries from these PA tables. Is there a way to restrict the output in SE16 by country code? If not, are there any options we can implement so that we can view the US data from these PA tables?
Thank you.
Ashish.

But SE16 doesn't seem to be doing checks on Personnel Area and Subarea. Isn't that applied to user roles so that ABAP programs only extract relevant data for that user? The only authority checks I found for SE16 in the code are:
authority-check object 'S_TABU_DIS'
           id 'DICBERCLS' field tddat-cclass
    authority-check object 'S_TABU_CLI'
                    id 'CLIIDMAINT' field 'X'.
So I am not clear how SE16 is restricted by Personnel Area and Subarea.
Thanks,
Ashish.

Calling custom Infotype method from Webdynpro Abap

Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from webdynpro abap this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish Shah

Hi Ashish,
You need to create method inside your assistance class, the class your webdynpro component talks to.
Within the methods of Assistance class you will have to create instance of ZCL_HRPA_INFOTYPE_9111 and call its method IF_HRPA_INFTY_BL~INSERT passing the data.
Cheers
Prashant

Calling custom Infotype method from ABAP report

Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from abap report this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish Shah

Hi,
This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
<CODE>
REPORT ZTESTRAD_WD.
FIELD-SYMBOLS <p9106> TYPE p9106.
DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
       message_list        TYPE REF TO cl_hrpa_message_list,
     w_ok type boole_d ,
     ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
     container        TYPE REF TO if_hrpa_infty_container,
     it9106_container TYPE REF TO cl_hrpa_infotype_container,
     p9106_ref        TYPE REF TO data,
    busilog type ref to if_hrpa_masterdata_bl.
CREATE OBJECT message_list.
TRY.
        CREATE OBJECT ref_class
          EXPORTING
            tclas = 'A'
            infty = '9106'.
      CATCH cx_hrpa_violated_assertion .
        write :/ 'Error during initialization'.
ENDTRY.
call method cl_hrpa_masterdata_bl=>get_instance
   importing
     masterdata_bl = busilog.
TRY.
CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
EXPORTING
    tclas           = 'A'
    pernr           = 'XXXXXXXX'
    infty           = '9106'
    begda           = sy-datum
    endda           = sy-datum
    no_auth_check   = abap_true
    message_handler = message_list
IMPORTING
    container_tab   = infty_container_tab
    is_ok           = w_ok.
CATCH cx_hrpa_violated_assertion .
   WRITE :/ 'Infotype could not be read'.
ENDTRY.
*" Fill the local structure with container data:
loop at infty_container_tab into container.
    it9106_container ?= container.
    TRY.
    CALL METHOD it9106_container->primary_record_ref
      IMPORTING
        pnnnn_ref = p9106_ref.
     CATCH cx_hrpa_violated_assertion .
    ENDTRY.
    ASSIGN p9106_ref->* to <p9106>.
    write :/ <p9106> .
endloop.
*" Just change some field values of the record
<p9106>-C1name2 = 'Test name'.
<p9106>-C2name2 = 'Test name 2 3 4'.
data : return TYPE BAPIRETURN1,
       return1 TYPE BAPIRETURN1.
*CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
   number        = <p9106>-pernr
IMPORTING
RETURN        = return1
*PERFORM do_nothing(sapfp50p).
The container itself is modified
container ?= it9106_container->modify_primary_record( <p9106> ).
CREATE OBJECT message_list.
the invocation - errors are always fatal !!!
DATA : lx_exception TYPE REF TO cx_root,
         update_mode type HRPAD_UPDATE_MODE,
         massn type massn,
         massg type massg.
TRY.
      CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
        EXPORTING
           old_container =                   it9106_container
           massn                          = massn
           massg                         = massg
           update_mode =                 update_mode
           no_auth_check =                   'X'
           message_handler =                 message_list
        IMPORTING
           is_ok =                           w_ok
        CHANGING
           container =                       container
    CATCH cx_hrpa_violated_assertion INTO lx_exception.
      RAISE EXCEPTION TYPE cx_wd_no_handler
        EXPORTING previous = lx_exception.
ENDTRY.
</CODE>
I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
I used this link to proceed with the modifications:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story.

Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5

Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
Leena

Hi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod.

Error in pulling customer master data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
Is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
it seems your customizing of ERP and CRM is different in this area.
Please try a new initial load for all the customizing objects which may be responsible:
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_KTOKD
DNL_CUST_PRC
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SPROD
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVKN
DNL_CUST_TVLS
We do every week a new load of this objects using a background job.
Alternativly you could investigate which customizing object is the correct one and only load this.
After this new load retest your scenario.
Best regards
Manfred

Customer classification data from ECC to CRM

Dear Friends,
We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
Thanks,
Rajinikanth G

Added new fields using AET and did Middleware enhancements as per the note - Note 736595 - Exchange of EEW fields with R/3 customer master.
Thanks,
Rajinikanth G

Reading GTS Customs Document Data from ECC

Hi,
I need to read customs document data for a corresponding delivery in ECC and do further processing in ECC based on customs document data. Is there any function module available either in ECC/GTS (RFC enabled) to read the customs document data?
Thanks,
Anu.

Hi Anu,
unfortunately there isn't any. The data flow is basically always ECC-->GTS. Only status data and some special data is retransferred (preference flag, commodity code etc.).
Why would you do this? The customs document is based on ECC documents. What is there in GTS that you needed in ECC but is not there?
Balazs

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Distributing customizing(control) data from SAP ECC to a non SAP System

Dear Experts,
I am currently working on an interface for distribution of different data to a non SAP System. One of these is customizing data (Company code, purchasing org. plant etc). The system expects a file and we shall implemet the following scenario: IDOC>XI>File
Questions:
1. Is it possible to use CONDAT Idoc to transfer customizing data to a non SAP System or is this only used for synchronisation of data between SAP Systems?
2.In case CONDAT cannot be used would you recommend creating a custom table, message type etc. for this case?
Please advise.
Thank you so much

Hi Narasimha,
We can do this with the help of PI. Please find the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404ee507-3fbc-2e10-00bc-be90ab28d036?QuickLink=index&overridelayout=true&52239687237174
Its from SAP PI to any other system.
Check this link too.. Proxy with Attachments.
Regards,
Siva

Custom Infotype - Data entered not visible afterwards

Hi,
I am new to ABAP HR and created infotype first time ever. Now the data which I am entering on the screen gets saved after clicking on SAVE. But it should be later visible when we want to see it using Change or Display mode which is not happening.
Do we have to code in the infotype as we do in screen. Can SET/GET Parameter id used?

- Did you follow the rule of a guide like [Developing an Infotype|http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/a8774f977f17b5e10000000a1553f6/frameset.htm] ?
- Can you "see" your data with SE16n browser ?
Regards,
Raymond

Need to transfer Custom infotype data using IDOCs

Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
Sarika

You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718

How to Retreive data from custom list on specify conditions?

Hi All,
I have custom list.And the custom list data contains 100 rows of data.
my requirement is how to retrieve custom list data from specific condition like 20-30,50-70.
Assume that i want to fetch 20 record to 30th record.
How to use the caml query for the above situation.
Please assist me.
Rama

Hi
Thanks for posting your issue, Kindly browse the below mentioned URL to find related the CAML query example
http://karinebosch.wordpress.com/2012/02/03/caml-and-the-client-object-model/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Custom infotype data from rec to pa

Similar Messages

Maybe you are looking for