Custom list in Sharepoint 2013 for training booking purpose

Kindly note that I am trying to  do custom list in Sharepoint 2013 for training booking purpose
As below :
The user should enter the user name  - it works fine
The user should select the data from the choice list
The requirement is , I need to limit in each  day of the training 20 seats (20 booking only) only
 Can you advise how to do so.
[email protected]
Basil

check below post and video on how to build the event receivers
http://www.sharepointpals.com/post/How-to-create-a-custom-list-level-event-receiver-in-SharePoint-2013-and-SharePoint-2010
https://www.youtube.com/watch?v=wZf2xvEM5Io
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Similar Messages

  • How go generate Popularity Trends report for a custom list in SharePoint 2013

    Hi, 
    I want to generate  Popularity Trends report for a custom list in SharePoint 2013, is it possible?
    Thanks
    khadar pasha

    According to
    this link you should be able to access this option from the Items tab. for this to work, the Analytics Processing Component needs to be running.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Setting up records management for a custom list in SharePoint 2013

    In a workflow 2013, I am planing to 'declare a record' on a custom list. I am doing this since I do not want users to be able to change the custom list once the record is submitted to workflow 2013.
    There are options in record declarations settings that I am not certain what to set like what values are appropriate in 'declaration of records can be performed by'.
    Since I am my own administrator on my test SharePoint 2013 website, would you tell me what I can do at the administrator's site level to enable the 'mark a record and/or declare a record feature? Basically I would like to know what options to set for a custom
    list so the records can not be modified once the custom list has been submitted to the workflow.

    Hi Wendy,
    There are 2 ways either in place records or records archive it will depend on your requirments.
    check this article it will guide you about how to configure each way
    https://support.office.com/en-nz/article/Implement-Records-Management-0bfe419e-eb1d-421a-becd-5be9fed1e479?ui=en-US&rs=en-NZ&ad=NZ
    To decide which one you will choose check the comparison in this link
    https://technet.microsoft.com/en-us/library/ee424394.aspx
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • Find and item Search not working inside custom list in sharepoint 2013

    HI,
    In Sharepoint 2013 , i configured the Search. it is working in home page search Box and Find item search box  inside custom list as well But one particualr custom list  Find an item is not working. Any clue ?Thanks in Advance
    Thanks
    sanjay pradhan  

    Hi,
    According to your description, my understanding is “find an item” search box in a custom list not work in your environment.
    As search box and “find an item” search box in your home page are working, so the search service application is working.
    Do you have any customzation to the particular custom list ?
    If No, I suggest you can full crawl the data in Central Administration ->Manage Service Application->” Search Service Application”-> Manage Content Sources” to test if it works. 
    Also, please check if you have set "Allow items from this list to appear in search results" in list settings->Advanced Setting to true
    Best Regards
    Jerry Guo
    TechNet Community Support

  • How to link Discussion Board with Custom list in sharepoint 2013

    I have a custom list, which  have collection of goals. and i have an discussion board for discussions about those goals from that custom
    list... so how can i link between those two. what my expectation is, if I select a "goal" from custom list, then the collection of discussions that related to goals will displays on other side...  and i have added a lookup column in discussion
    board that refer the goal name in the custom list so i am relating goal name between these two. 

    Hi VinoJash,
    According to your description, my understanding is that you want to click the ‘discuss’ column in the custom list to navigate to the associated discusstion. Is it right?
    You can do as the followings:
    Open your custom list
    Create a new column, the type is Hyperlink or Picture, select Format URL as: Hyperlink
    Navigation to a discussion, copy the URL of the discussion
    Back to the custom list, and new an item
    Type the title, and paste the URL copied in step 3 under ‘Type the web address:’, type a name for the description of the url
    Click Save
    In my testing, the result is :
    If I click ‘first discussion’, it will open the ‘first’ discussion.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to get attendies count for a calendar list in sharepoint 2013?

    Hi everybody,
    I am using calendar list in SharePoint 2013 for my project.
    Could please tell me how to get the count of attendees using SP Designer or OOTB calculated field.
    Because I want to display the fields like
    TOTAL SEATS =20
    Attendees= Need count
    Avail seats= total - Attendees count.
    In that way I want to show information about availability seats for training session.
    Regards,
    Dhayanand

    Hi Dhaya
    Please refer the links.Hope it helps :-)
    http://social.msdn.microsoft.com/Forums/en-US/b8677dc5-3eb1-4bdc-92f2-f57201bfabb1/field-that-counts-attendees?forum=sharepointcustomizationprevious
    http://sharepoint.stackexchange.com/questions/54253/use-count-related-column-value-as-int-in-a-sp-designer-workflow

  • Custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list

    I  am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi Greetings.
    pls check if it helps you.
    http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Add two attachment field in custom list through sharepoint designer 2013

    Hi all,
    I want to add two attachment columns to the SharePoint 2013 custom list through SharePoint Designer 2013 (not using ribbon attachment option) only . I managed to attach single attachment column to the attachment field. But I am not able to create second
    field for attachment.
    for example, one column for attaching address proof and second column for identity proof.
    Any help would be appreciated.

    Out of the box this simply isn't going to be possible the way you seem to want it. The attachment field does allow for multiple attachment, but I can see why you'd potentially want these separated out.
    Alternative:
    You could instead create a link field for each. Users load the documents into a document library and then copy the URL to paste into the form. If you potentially need multiple attachments for each, you can use an InfoPath form and a repeating table.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • Reading values from lookup columns through custom workflow in SharePoint 2013

    We are able to read the values of text, number columns through custom workflow (via coding) in SharePoint 2013. However, we are not able to read values from lookup columns. So, request anyone to provide help on this.
    Thanks & regards,
    Aditya

    Hi,
    According to your post, my understanding is that you want to read values from lookup columns through custom workflow in SharePoint 2013.
    Since the workflow just doesn't get lookup fields, let's give it something static to work with instead. If we can capture the ID of the lookup field and store that as a static value in our list, the workflow can happily use that to look up our related.
    For more information, you can refer to:
    SharePoint 2013 Workflows and Lookup Columns
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How to configure service endpoints of custom webservice in SharePoint 2013?

    Hi,
    I have created a custom webservice in SharePoint 2013. I placed it in a sub folder under the ISAPI folder. I followed the instructions of this article: http://msdn.microsoft.com/en-us/library/office/ff521581(v=office.14).aspx. The webservice works
    great, however when I try to send a large file I get the message "413 Request entity is too large".
    After some searching I found out that you can create a web.config in the subfolder and define the endpoints and bindings, after which I get an error that there is already an endpoint defined for the specified URI. I believe this has something to do with
    the BasicHttpBindingServiceMetadataExchangeEndpointAttribute but I'm not sure.
    Can anyone help me solve this issue?
    Regards,
    Sander

    Hi,
    According to your post, my understanding is that you want to configure service endpoints of custom webservice in SharePoint 2013.
    Per my knowleadge, after you add a reference to Microsoft.SharePoint.Client.ServerRuntime, you can use the BasicHttpBindingServiceMetadataExchangeEndpointAttribute.
    In VS  go to the add reference and paste the following: C:\Windows\assembly\GAC_MSIL\Microsoft.SharePoint.Client.ServerRuntime.
    In addition, please make sure you create the custom web service correctly.
    For more information, you can refer to:
    SharePoint 2013: Create a Custom WCF REST Service Hosted in SharePoint and Deployed
    in a WSP
    How to create Custom Web Service WCF (REST) in SharePoint 2013
      Adding custom WCF services to a SharePoint 2013 farm solution using Visual Studio 2012
    "BasicHttpBindingServiceMetadataExchangeEndpointAttribute" could not be found
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Issue After Rating setting is enabled to the Discussion Board List in SharePoint 2013.

    Hi ,
    We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Did anyone got this issue earlier and any solution for this.
    Ashish Kumar Baranwal

    Users which were getting issues actually getting below error:
    [COMException (0x81020014): One or more field types are not installed properly. Go to the list settings
    page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
       Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String
    bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
    Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
    pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
       Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
    Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
    Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
    pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
    [SPException: One or more field types are not installed properly. Go to the list settings page to delete
    these fields.]
       Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
       Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
    Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
    Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFil
    Ashish Kumar Baranwal

  • How to change the url of "Add New Item" of a particular list in SharePoint 2013???

    Hi Guys,
    How to change the url of "Add New Item" of a particular list in SharePoint 2013???
    I need to redirect it into the page where I have created my Visual web part.
    Please suggest
    Warm Regards,
    Tony Joy

    Hi,
         There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
    Hope it helps!!!
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

  • Generate reports from lists in SharePoint 2013 (Office 365)

    Hello everyone,
    We are in the need to generate reports from lists in SharePoint 2013. The reports would do data mingling between lists (like a relational database) and generate the reports in HTML and maybe a link to pdf on the SharePoint site.
    We are currently generating reports in Access. This is an issue for two reasons:
    Reports cannot be generated on the fly. Whenever we want reports in pdf form, we have to go into Access and run our reports macro written in VBA. It essentially generates the reports as pdf into our synced SkyDrive, which syncs it to our SharePoint site
    Report generation cannot be done by the client. This is due to the same concept as (1). We need to generate reports in Access.
    Is there any way to do this in SharePoint 2013? Are there any apps that do this?
    Any guidance or help would be appreciated.
    FYI: Our SharePoint server is hosted on the Office 365 network. It is not a local system.
    Thanks

    One option is to run the info into a Word Template and then run Word Automation Services to convert to PDF, but I think you're still going to run into some similar issues.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • Issue After Rating field is added to the Discussion Board List in SharePoint 2013

    Hi ,
    We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Please help on this.
    Ashish Kumar Baranwal

    Users which were getting issues actually getting below error:
    [COMException (0x81020014): One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
       Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID,
    String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress,
    Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
       Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
    pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
    Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
    [SPException: One or more field types are not installed properly. Go to the list settings page to delete these fields.]
       Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
       Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
    pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
    Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +2336
    Ashish Kumar Baranwal

  • Crawl log error in sharepoint 2013 for search services

    Dear Support,
    please find below mention crawl log error in sharepoint 2013 for search services.
    8,597 The server is unavailable and could not be accessed. The server is probably disconnected from the network. 
    423 This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also
    want to crawl this repository during off-peak usage times. 
    59 Processing this item failed because of a timeout when parsing its contents. 
    11 The filtering process has been terminated 
    4 SharePoint returned an empty response. 
    3 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. 
    2 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. 
    would request your support for resolving this type of issue

    1. Are you able to browse the sites on SP server. server is unavailable means that application pool
    of that site is down. Check application pool on all server. if you start any application pool. make sure it does not stop few minutes later. you need to update password if it does stop
    2. Create a disable loopbackcheck of registry on all servers
    http://blogs.technet.com/b/sharepoint_foxhole/archive/2010/06/21/disableloopbackcheck-lets-do-it-the-right-way.aspx
    http://support.microsoft.com/kb/926642/en-us
    3. Create a new search service application and check if you face same issue.
    4. I assume you have change some password or other setting when you started facing this issue. what changes were made in environment
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for