Custom Odbc error code

Hi All,
I want to know if there is any way where we can customize the odbc error code whenever a error is displayed in presentation services.
Thanks in Advance!!!

I have lloked into custommessages.xml but i figured out that we can change or custom the message but not sure error code asscociated the message.
please let me know about this

Similar Messages

Customizing ODBC errors in OBIEE 11g

Hi,
I have a requirement where the user is expecting to see some Custom error messages instead of the Default ODBC errors OBIEE throws. Like the one below.
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22055] First argument of Parent function must be a hierarchy in a Parent-Child dimension with a single column Member Key. (HY000)
Where i can find the files which has these messages.They should be on some .xml or Java file on the server. If i know that location, i can change the error into Custom error messages.
Any help would be really appreciated.
Thanks
Swami

Swami,
These kind of custom error messages,You need to do it manually for each report
Edit Analysis Properties ---- Results Display ----- Display Custom Message
Mark if you helps,
Thanks,

Custom user defined error codes

Does TestStand use my custom defined error code file that I created in LabVIEW. It is in XML format and works fine with LabVIEW but does not seem to be picked up by TestStand. Do I need to configure this?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Matt -
Turns out that it does work if your error file is located in the proper location.
The TestStand adapter internally uses the LabVIEW Runtime engine so it expects additional language files under
C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\7.1\Errors\English\.
The LabVIEW development environment expects the additional language files under C:\Program Files\National Instruments\LabVIEW 7.1\user.lib\errors\. I think this will be used when running a LabVIEW application, like an OI, that uses TestStand.
In general NI software places its error files under C:\Program Files\National Instruments\Shared\errors\English\. I do not recommend this location, but if anything is added to it, I think LabVIEW and the RT woul
d picked it up.
Scott Richardson (NI)
Scott Richardson
National Instruments

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

The question of error code

hi :
i am an new learner of oracle
i want to know the error code of oracle
for example select ,insert ,update error and so on
who can send it to me ?
e-mail :[email protected]

http://tahiti.oracle.com has all the Oracle error codes & messages (i.e. ORA-xxxxx) as well as all the other Oracle documentation.
If you're looking for ODBC error codes (SQLState), those are going to be in any ODBC API reference.
Justin

ODBC Error, think it's bc of Application.cfm

Ok I'm working on a small e-commerce project and it's been
about a year and a half since I've done programming with CF, so I'm
doing a lot of re-learning, basically everything and only remember
a very small bit, so basically I'm noob again.
OK I built my project, I'm using MySQL as my database
container. Everything runs perfectly fine on my local machine
server but when I go to upload it to my hosting provider. I get the
following error when I try to access the database on the hosting
provider.
Error Diagnostic Information
ODBC Error Code = S1000 (General error)
[MySQL][ODBC 3.51 Driver]Access denied for user 'ODBC'@'my IP
address' (using password: NO)
The error occurred while processing an element with a general
identifier of (CFQUERY), occupying document position (1:1) to
(1:54).
OK, my guess right now is that it has something to do with
the user and password authentication, and if that's the case, but
to be honest I have no idea whats going on, cause this problem
doesnt occur when I use PostgreSQL. I hope someone on here has been
through this and knows what's up.
Here's the code in my Application.cfm file
<cfapplication name="joecool-ecom" sessionmanagement="yes"
/>
<cfset Request.DSN = "joecool-ecom" />
<cfset REQUEST.BasePath =
GetDirectoryFromPath(GetCurrentTemplatePath())>
I'm completely lost and have been trying to figure this out
for a solid 7+ hours. I'm hoping that it's just something really
really lame and stupid that I'm doing wrong on my side and that it
can be fixed very easily, but part of me questions if my hosting
provider just plain sucks and that I may end up having to switch
providers or something.

well i found a solution and yes it was a b***...
It turns out it had something to do with ODBC on my hosting
provider and MySQL. I ran a test on PostgreSQL and it worked fine,
so I just redid my entire database into PostgreSQL and then changed
all my boolean crap in my code from 1 to TRUE and 0 to FALSE. It
sucked, but at least it works now.
If anyone has any experience with using ODBC with ColdFusion
for MySQL, if you have any ideas of why this error would occur,
please let me know. It has to do with it trying to login
anonymously and not using a PW, but I have no idea how to fix that
on a hosting provider. Talked to them and its just a bunch of
foreigners that don't know anything about computers so....
whatever.
Also if anyone knows any good hosting providers that keep
their ColdFusion current, please let me know. I'm getting away from
mine once my subscription runs out in a few more months. They're
still using ColdFusion 5, which sucks

Custom Workflow Load Error in Power Center error code 36331

Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.

Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

Build error when using custom error codes

When I try to build my application using custom error codes I receive the following error:
Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.

Hi Donovan,
The attached project is giving me the error previously discussed. Thanks for your help.
Attachments:
BuildError.zip ‏10 KB

Error during Custom Build - error PRJ0019: A tool returned an error code from "Performing Custom Build Step"

Hi All,
I was trying to develop C++ web service using GShop with Visual Studio 2005.I refered a tutorial :-
http://guruce.com/blogpost/hosting-webservices-on-windows-embedded-compact-windows-ce-using-gsoap .
AS per the tutorial i proceeded. But, i stuck-up when making a custom build with Helloworld.wsdl.Here is the output :
1>------ Rebuild All started: Project: HelloWorldWebService, Configuration: Debug Pocket PC 2003 (ARMV4) ------
1>Deleting intermediate and output files for project 'HelloWorldWebService', configuration 'Debug|Pocket PC 2003 (ARMV4)'
1>Performing Custom Build Step
1>'D:\Test' is not recognized as an internal or external command,
1>operable program or batch file.
1>Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
1>Build log was saved at "file://d:\Test Code\HelloWorldWebService\HelloWorldWebService\Pocket PC 2003 (ARMV4)\Debug\BuildLog.htm"
1>HelloWorldWebService - 1 error(s), 0 warning(s)
========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
As given in the tutorial i kept my custom build command line as : -
$(SolutionDir)\gsoap-2.8\gsoap\bin\win32\wsdl2h.exe -s $(InputPath) -o $(ProjectDir)$(InputName).h
and outpouts : $(InputName).h
I kept GSHOP in the project filder :- D:\Test Code\HelloWorldWebService
Kindly help.
Jyotiranjan

Hi Jyotiranjan,
I’m glad to hear that you got it working.
Thank you for sharing your solutions
experience here. It will be very beneficial for other community members who
have similar questions.
Best regards,
Lucy
Lucy Liu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near

Hi,
I am currently receiving the following error in BI Answers when I run a query against a Microsoft SQL 2005 Server.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT 0 s_0, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."Id" s_1, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."UserName" s_2 FROM "SD&A_Dashboard_Test" WHERE ("BORIS_ALIAS_ETMS_Users"."UserName" = 'trowe') FETCH FIRST 65001 ROWS ONLY
I am able to connect successfully to the Data Source and run a query against the database using the NQCMD command line tool so believe I have configured the DataDirect 7.0.1 drivers correctly, also I am able to view the Table Data in the RPD Physical Layer in the BI Administration Tool. So don't understand why I am getting this error.
I have also activated the nquery.log but that doesn't really give me any further information.
[2015-04-28T16:37:22.000+00:00] [OracleBIServerComponent] [TRACE:4] [USER-34] [] [ecid: 4a9e440f990ba0a4:-1995d2c5:14d00d3ef04:-8000-00000000000001c6,0:1:1:5] [tid: 5f] [requestid: 6f11000b] [sessionid: 6f110000] [username: borisdev] -------------------- Query Status: [nQSError: 16002] Cannot obtain number of columns for the query result. [[
[nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'..
[nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared..
[nQSError: 43119] Query Failed:
I was wondering if anyone could shed any light on what could possibly be causing the [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. error ? And also provide any suggestions on how I can troubleshoot this issue further as I am now completely out of ideas of what to do next having tried numerous things i.e. setting IDENTIFIER_QUOTE_CHAR = '' in DBFeatures.INI which I found in similar posts on the subject all to no avail
Regards,
Tom Rowe

Hi Rajagopal,
Thanks for your reply after doing some further investigations this morning I found and corrected the problem...
The DataDirect Driver does not like double quotes in the query for some reason, testing using the BI Answers generated SQL with the nqcmd tool below...
With double quotes “” it fails immediately
Give SQL Statement: select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'Id'.
Statement execute failed
With double quotes removed for just the columns I now get the Error near ‘ETMS_Users’ which still had the double quotes
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'ETMS_Users'.
Statement execute failed
With all double quotes removed it works !
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
c1 c2
42499 trowe
Row count: 1
Give SQL Statement:
The solution to fix the problem is...
In the BI Admin Tool Physical Layer Database, Properties Features tab is to delete the double quote in the Value column for IDENTIFIER_QUOTE_CHAR, setting this in the DBFeatures.INI file does not resolve the problem possibly it did in earlier versions of the product.
Regards,
Tom Rowe

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

Using error codes.txt and error rings don't allow parameter inputs like custom error rings?

The error ring is very useful, especially with its parameterized inputs you can specific with %s, %f and %d parameters. I'd like to do the same thing in my fixed error codes using the error ring so that I can localize them into mulitple languages, but it seems that LabVIEW error codes from project text files never detect or support the parameter inputs, you get a error ring, but no input parameters. If you use the same string in a customer error code, it gives you the parameter input but then its hardcoded and you can't localize it. What gives?
Is there some other way to configure the error rings to use a project file for the error codes but still support the parameter inputs?
Solved!
Go to Solution.

Hi Mike_King
Here is a VI snippet that I created with two different approaches, in the first one I used the format into string, the second one the function search and replace.
Here are some links with information about the functions that I used.
Format Into String Function - LabVIEW 2011 Help
Search and Replace String Function - LabVIEW 2011 Help
Regards
Esteban R.
Attachments:
Generate error code.png ‏34 KB

Custom Odbc error code

Similar Messages

Maybe you are looking for