Custom Segment is not appearing in orders05

Hi ,
I am trying to extend IDOC type ORDER05.I have followed all the steps But even then segment is not appearing after i generate IDOC and test in we02.
The two fields has to extended in EKKO and same has to extened in ORDER02 at the time PO creation.
This is the requirement. Right now iam not passing any data in the custom segment but i have done all the initial configuration..
Idoc also generated succssfully..but its having my custom segment..Pls advice

Yes, that include need to be created. By double clicking on it you will get a prompt to create the object (provided you have developer access), choose yes and you should be able to create the include and put a break point on it.
In IDOC_OUTPUT_ORDERS function module that creates the outbound ORDERS05 IDoc.
--> EXIT_SAPLEINM_002 will be called repeatedly for each IDoc segment while the IDoc is still building
--> EXIT_SAPLEINM_011 will be called once for the whole IDoc, once SAP finished building it
So yes, you can use any of these user exits to manipulate the output IDoc.
Also, the break point won't get triggered when output type is set to trigger immediately (dispatch time 4) when you issue the output from ME22N / ME23N, because the IDoc will be triggered asynchronously in this mode by the system and not in your session, so your session break points are ineffective.
What you need to do is go into the ME22N output page (Click Messages on ME22N screen, select the condition type in yellow color (not yet processed), click on "Further data"and set "Dispatch time" to 1 (Send with periodically schedule job). After doing this issue the output (by saving the PO etc). This will mean that the output IDoc is not triggered immediately.
Now put the break point in the suggested user exit.
Come to SE38 and execute RSNAST00 program, give "Output application" as "EF", object key as your PO number (format it with leading zeros for full 10 digits) and enter your output type. Run it and then you will see that your break point is hit.

Similar Messages

Custom item does not appear on Hotsync Menu

I have a Sprint Treo 700p. My work email was converted to Outlook from GroupWise. I am able to sync successfully, but received a message about changing profiles and conduits. I tried to do this by clicking the Hotsync icon in system tray. The menu that appeared only had three items (Settings, Install, Exit). The CUSTOM item does not appear. I am using Hotsync Manager 7.0.2. How can I get back the CUSTOM menu item?
Thanks in Advance,
Corey
Post relates to: Treo 700p (Sprint)

Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
To get to your Hotsync settings, click the Hotsync icon, and select Settings. Then click Applications. Select the conduit you wish to change, and click Configure.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Urgent: Custom font style not appearing in PDF output only

Hi,
For a customer, I received customer specific font styles(ttf font files) which I installed on my machine and then copied those files in Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts as well as in JRE/lib/fonts. Then I created a template in word and font there appears as custom font.
Now I am getting that font style in all output formats(rtf,ppt,excel) except the PDF output. I am using Oracle BI Publisher desktop alone. Not sure what I missed because of which text font is not changing in PDF version only. I checked the PDF properties and there also custom font is not getting mapped.
Thanks in advance.

Here is the link that describes how to set up the font mapping for PDF output: Look for "Font Mappings (for PDF output)"
BI Publisher Demo Library</title><meta name="Title" content="BI Publisher Demo Library">…http://www.oracle.com/technetwork/middleware/bi-publisher/learnmore/demo-library-toc-173301.html
Thanks,
Bipuser

Custom Composed Look not appearing in Change the Look with custom color palette

Hi,
I created custom color palette, (which was a copy of one of the out of the box ones) and uploaded it to the Themes folder under a different name. I then went to the Composed Looks and created a new Composed Look(using the New
Items), which the seattle master page, and the new color palette that I created.
When I go to Change a Look, the new Composed Look does not appear as part of the options.
When I change the color palette of the Composed Look, to one of the out of the box ones, I see it I the Change a Look page.
What am I doing wrong?
Thanks

I would check two things. First, did you check in the spcolor file you created? Second, I would review all of the properties of your composed look found in "/_catalogs/design/AllItems.aspx". You might want to copy and paste all properties (except
title and name) and see if your new composed look shows up in "Change the look". Then link to your own custom spcolor file.
Eric Overfield - PixelMill -
blog.pixelmill.com/ericoverfield -
@EricOverfield

Custom templets are not appearing

Hi All,
I created my custom templetes but they are not comming when i am creating new jspx these templets are not appearing
why its not appearing.
Regards,
Smaran

Which jdev version?
check if your templates appear in the pagetemplate-metadata.xml file. This file should be build when you've build the templates.
Timo

Custom segment does not exist for message type Debmas_cfs

Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabh

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

Custom fields are not appearing in BP

Hi Friends,
My requirement is to add a new fields in Business partner(TCode:BP). For this I have created a new tab using Business data tool set by following every step. I have regenerated the screens also(using Tcode:BUSP). But after executing the transaction I am able to see the tab but not the fields. Fields are not appearing in the tab. What might be the reason?? Kindly clarify me.
Regards,
Steve

Hi,
For this purposr you have to use EEWB enhancements to add field to your new tab page.
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

Custom splash screen not appearing in the Dynamic created jnlp()

Hi,
I am not able to show my custom splash screen while starting the webstart application, instead getting the "sun webstart logo". I am dynamically generating the jnlp file using jsp (struts application). Application is working perfectly except custom splash screen. Below is my jsp which will generate the jnlp on fly. The test.gif file is in place.
<% response.setContentType("application/x-java-jnlp-file");
response.setHeader( "Pragma", "no-cache");
response.setDateHeader( "Expires", 0 );%>
<%@ page import="java.io.*" %>
<%String baseURL = WebUtil.webUrlParser(request.getRequestURL().toString(),request.getContextPath(),request.getServerPort());%>
<jnlp      spec="1.0+" codebase="<%=baseURL%>/cs_jnlp">
<information>
    <title>Launching JNLP</title>
    <vendor>Satyasai</vendor>
    <icon href="/images/test1.jpg"/>
    <homepage href="docs/help.html"/>
   <description>test</description>
        <icon kind="splash" href="images/test.gif" />
   </information>
      <security>
        <all-permissions/>
     </security>
     <resources>
   <j2se version="1.6+"/>
   <jar href="<%=baseURL%>/cs_jnlp/AppLaunch.jar"/>
</resources>
     <application-desc main-class="Launch" >
     <%
     int roleId = (Integer)session.getAttribute(Constant.USER_TYPE);
     String sessionID=(String)request.getAttribute("SELECTION_SESSION_ID");
     String action=(String)request.getAttribute("action");
     String userID = (String)session.getAttribute(Constant.LOGIN_ID);
     String sessionType=(String)request.getAttribute("sessionType");
     %>
       <argument><%=sessionID%></argument>
       <argument><%=action%></argument>
     <argument><%=userID%></argument>
     <argument><%=sessionType%></argument>
</application-desc>
</jnlp>If I use normal servlet - jsp using RequestDispatcher to forward request to a jsp which on fly creates jnlp, it shows the my custom splash screen. I am not very sure where is the difference. If I look at both generated jnlps they are almost one and the same. Can any one throw some insight on this.
Thanks & Regards,
Satyasai

Hi Andrew,
Thanks for your response.
1. I have launched it number of times but no luck.
2. I have written a jsp (using servlet + jsp no struts frame work) which will create jnlp on fly, which is showing my custom splash screen. If you refer in the initial post, it is not working with struts kind of framework. See the below jsp which shows custom splash screen. It worked without href.
3. All jnlps are well formed and perfectly working in my development environment. For security purposes I have not shown some of the texts and logos.
<% response.setContentType("application/x-java-jnlp-file");
response.setHeader( "Pragma", "no-cache");
response.setDateHeader( "Expires", 0 );%>
<%@page import="java.util.ArrayList" %>
<%
String client = (String)request.getAttribute("clientLocation");
String fileNames = (String)request.getAttribute("filenames");
String url= (String)request.getAttribute("serverFilesLocation");
String baseURL = "http://"+request.getLocalAddr()+":"+request.getServerPort()+request.getContextPath();
%>
<jnlp spec="1.0+" codebase="<%=baseURL%>/sw_jnlp">
<information>
    <title>Softwares Download</title>
    <vendor>test</vendor>
    <icon href="/images/test1.jpg"/>
    <homepage href="docs/help.html"/>
   <description>Software Downloads </description>
        <icon kind="splash" href="images/logo_small.gif" />
   </information>
   <update check="timeout" policy="always"/>
      <security>
      <all-permissions/>
</security>
<resources>
    <j2se version="1.6+"/>
    <jar href="mod.jar"/>
</resources>
<application-desc main-class="InstallSW">
<argument><%=client%></argument>
<argument><%=fileNames%></argument>
<argument><%=url%></argument>
</application-desc>
</jnlp>Thanks & Regards,
Satyasai

Custom menu item not appearing in HTML5 Output

I'm trying to add a custom menu item to the top right of a project, it shows up fine in the flash output of a published SCORM file, but it's non-existent in the HTML5 output.
Has anyone experienced this issue, or have any suggestions for a solution?
Thanks in advance for any help you can provide!

I did it through the Skin Editor in Captivate, it is not an external flash menu...I wouldn't expect it to convert flash to html5. Through the skin editor you can add extra buttons, in the same place you can move the table of contents button, to the "top right". The problem is, the custom menu items won't even show the text where the link should be in html5, nothing... only when published to flash.

Text Items And Push Buttons Created on a customized form does not appear.

Hi,
I created a custom form and attached it to ebs. The form opens without any error.
I had 3 text items and 2 push buttons with proper property class applied to them. But I am only able to see the prompt of the first text item. All the other widgets are not visible. What could be the possible cause for this.
Deepak

How are you running the form? Have you deployed it properly and attached it to a menu/form function and are viewing it within EBS?
Did you open the TEMPLATE.fmb form and save a copy of it as the starting point for your custom form?
--Johnnie

FDMEE: EBS segments not appearing in the FDMEE Load Rule window

I have configured FDMEE to load GL data from specific E-Business 12 segments. This has been working fine.
Recently, additional segments were defined in EBS. Unfortunately, these new segments do not appear in the Load Rule box (whereas the original segments do appear).
Is there an option/trigger somewhere in FDMEE (or EBS) to force the new segments to appear in the FDMEE Load Rule selection segment box? (I have re-initialised the source system, with no effect.)
Ian

Hi,
You need to make sure that you are adding them to the Import Format defined between the Source and Target system. Have you done this yet?
Are there target dimensions in the app to point to?

"Customize Toolbar" Not Appearing

Selecting "Customize Toolbar" does not work correctly in my Intel iMac (10.6.7), with Snow Leopard.
The drop down menu of available customizing options does not appear.
How can this be corrected?

When attempting to move the Forecast Fox toolbar display, you have to be viewing this page - http://www.getforecastfox.com/customize/16/
That page automatically opens when you hit the Options button for that extension in Extensions on the Add-ons Manager tab in Firefox 4+ versions. This is the only extension that I have ever seen which did preference settings in this manner.

Custom idoc segment fields not populated

Way back in 1999 someone create a custom Idoc type with custom Idoc segments in it. Unfortunately, they forgot to release one of the segments.
Recently a change was request to add new fields to this custom segment. In order to get the fields transported the segment had to be released.
All worked fine in Dev and the new Idoc segments were populated as expected. However when the idoc segment was moved to the test system all visually appears to be fine but when the idoc is created (status 50) the new fields are not popultated.
In 40B the start of the inbound process was IDOC_INBOUND_DATA. Does anyone know what the new starting point is in 4.7??
I beleive the error is actually that SData is not reading all the input values and stopping right where the old fields end in teh custom segment.
Thanks,
Anthony

additionally,
SAP will not allow us to release the basic idoc type because it was released in 40B. It also will not allow us to cancel the release since we are now in 620. So, unless anyone has input for this I think the only solution will be to create a successor IDoc type and change our apps to use the new IDoc type with it's enhancements.

Nested Menus Not Appearing in a Custom Panel Fly-out Menu

I tried to create a menu for a custom panel, using the example which David Clark graciously pointed out to me:
http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/programmers_guide/cus tomizing_the_ui.htm
However, the nested menu items do not appear. I only see Item 1 and Item 2 (and the separator and Item 3), but not Item 2-1. I was expecting to see Item 2-1 nested under Item 2.
I used the menu structure provided in the example (note that there is an error in the example - one of the closing tags is incorrectly specified as "<MenuItem/>" instead of "</MenuItem>"). Below is the corrected XML and my code:
protected function createMenu():void
   var xmlMenu:XML =
    <Menu>
      <MenuItem Id="item_1" Label="Item 1"/>
      <MenuItem Label="Item 2">
        <MenuItem Label="Item 2-1"/>
      </MenuItem>
      <MenuItem Label="---"/>
      <MenuItem Label="Item 3"/>
     </Menu>;
    CSXSInterface.instance.addEventListener(MenuClickEvent.FLYOUT_MENU_CLICK, menuClickHandler);
    var menuAdded:SyncRequestResult = CSXSInterface.getInstance().setPanelMenu(xmlMenu);
    if (SyncRequestResult.COMPLETE != menuAdded.status)
     trace("Unable to add menu");
   public function menuClickHandler(event:MenuClickEvent):void
       switch (event.menuName) //you can also use the menuId
    case "Item 1":
    trace("Item 1 has been clicked");
    break;
    default:
    trace("clicked " + event.menuName);
I'd appreciate it if somebody could tell me what I'm doing wrong.
TIA,
mlavie

Hi Bob,
Any news? BTW - the example should be corrected - there is a tag incorrectly closed.
Regards,
mlavie

Profit center field is not appearing while posting of customer invoice and

Hi,
profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
Can anybody tell what are all new gl Reporting list of transaction codes

Hi,
In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
Thanks,
padmaja

Custom Segment is not appearing in orders05

Similar Messages

Maybe you are looking for