Custom sizes not supported in 10.8

Mountain Lion DOES NOT SUPPORT custom size printing on wide format printers!!!!

Thank you for the follow up. I am glad you got some answers and a way to proceed. I am sure your post will help many others.
I am in 10.7 right now, so I can't exactly duplicate what would appear in Mountain Lion. I took a look at the screen to enter custom page sizes. I noticed that no matter what I put in, it always defaulted to "inches" (I'm in North America). Even when I specified "mm" or "pt" it reverted back to "in". I think the printing system really works only with points -- 72 points to the inch. At least I have always seen measurments in points in PPD files when the maximum height and width are stated for a custom page size.
For the v8.64 driver for your Epson 3880, the PPD contains:
*MaxMediaWidth: "1224.20"
*MaxMediaHeight: "2692.80"
Using the Calculator program from OS X to do the conversions, that would be 17.002 inches (431.870 mm) by 37.400 inches (949.960 mm) for the maximum media size.
I suppose the end result of this is that it would be nice if there were some validation and a simple warning that would tell you the size of the media selected was larger than the maximum allowed.

Similar Messages

Extend volume - Storage Pools - iSCSI - "Extend failed" // "Error extending volume: Size Not Supported"

Hi,
I've created a storage pools of 44x 1TB SAS, my storage pool name is "DAS" with 39.1TB (35.8 TB Free Space)
I have a virtual disk named "iSCSI_DFS", Simple, Thin, 20TB with 3.05 TB Allocated
I've created volumes on that disk, NTFS, Thin, Different size.
I create iSCSI VIRTUAL DISKS on those Volumes, same size (my volumes are full)
I want to "extend" my volumes size... I click on my volume, Extend Volume, enter a new size (current is 162GB so I enter 200 and select GB) and click OK
The Volume status turn to "Extend failed" with "Error extending volume: Size Not Supported"
Can you help? I need to change my volumes size...
Thx

I also could not get my partition to extend using the new Windows Server 2012 interface. Did you try to extend volume from the "computer management", "disk management" console? Get there from Administrator Tools - Computer Management. I
was able to extend my partition only from there. You need to first make sure you have available space on the disk. I had to delete an empty volume first before I was able to extend the partition. Hope this helps. Anthony :)
Thx !!
While in the Computer Management, I realised that my Disk was "Basic" and not "Dynamics", Extending using the Disk Management suggest to switch to Dynamics, and it's now working.
The error in the Server Manager should be "Unable to Extend : Your disk is Basic" or something like.
The Disk is a virtual disk on my Storage Pools.!!!

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

Custom AccessGate not support Multi-domain SSO

Hi,
I have a requirement to implement the Multi-domain Single Sign-On with custom built SSO plugin (i.e Webgate/AccessGate/WebAgent), we have proposed OAM to implement Multi-domain SSO with custom built accessGate, now we are facing issue is, as per Oracle Access Manager documentation, Multi-domain SSO will not work if we use Custom Built webgate/AccessGate. Do you know whether OAM 11g or CA or Tivoli will support Multi-domain single sign-on with custom WebAgents?? Your quick response is highly appreciated.
Regards
Som

Since you have MDSSO implemented you need to figure out a way for multidomain logout as well.
In the step 3 since you logged out of abc.com, the obSSOCookie for that domain is deleted but the cookie in the domain def.com still remains so you are able to login again in def.com. If the central domain was completely different from the other domain than you would have got the SSO even after logout.
Seems like you have a configuration where you will never be able to logout of def.com because the cookie in the central domain will always be there until it times out.
Here's what you need to do..
-During logout call logout for all the domains configured

Error CSS Value not supported.

I'm trying to use a css file but the compiler keeps shouting
about these errors:
"CSS Value for 'color' not supported."
regarding this line in the .css:
.processParamMandatory {
color: inherit;
and "CSS Value for 'font-size' not supported."
regarding this line
.creativeBottom {
font-size: 75%;
Any ideas?
Thanks.

"nikos101" <[email protected]> wrote in
message
news:g8126i$i9$[email protected]..
> Canvas
> {
> backgroundColor: #F0F4FF;
> cornerRadius: 20;
> background-alpha:0.4
> }
I would think it would work better if you used
backgroundAlpha. I know the
context-sensitive help gives you background-alpha, but I
don't think that's
valid.
HTH;
Amy

Custom size

Hi
Trying to print bigger than A0 and custom sizes not working for me. I'm printing from either Vectorworks or Photoshop and have a custom page option. I've set custom pages at a variety of sizes. Sometimes they print half and then give up - sometimes they print at A4 - the outcome appears to be rather random. But they consistently don't do what I want them to do! I'd be happy if I could print on consecutive sheets of A0 without the page cut inbetween so that I'm using the length of the roll - but I can't even figure out how to do that. Any advice much appreciated! Jen

Hi, For the printing problem, first make sure that the page size on the driver match the paper size on the application. Also, make sure that the page size is set correctly on the application.If you will have problems, try reinstalling the driver. About printing all the images together, unfortunately there is no hard drive on the printer to do nesting, you might wanna use a software like PhotoShop to create your page and put all the images together. Best regards Mike G

Paper Size Error: The specified custom paper size is not supported in the selected tray.

This happens when I try to print a web page using firefox. When I copy and paste the same yrl into safari and select that page in Safari it prints without a problem.

Hello Bhumika2 ,
Welcome to the HP Forums.
I see that you are having some printing issues with paper sizes.
Seeing that the operating system is 10.5, the printer is not supported on this version. I suggest that you check for apple updates and see if anything is available.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Custom Print Size not printing to Epson 4900

I had Epson Support on the phone yesterday as I have been unable to print anything wider than 22 inches from Lightroom 5.7 . The custom page size is 17" by 30". The tech took over my computer, made sure all was set up correctly. The lightroom print module showed the proper dimensions and the tech hit print. The print came out resized at 22 inches. The tech then opened the same photo in Photoshop CS5, set up a custom paper size to 17 by 30 and hit print. The print preview showed the proper dimensions and he sent it to the printer. The print came out perfectly at 17x 30. He had no explanation but said it had to be a lightroom problem and not a problem with the 4900
All firmware and software updates have been downloaded to the printer. The computer is a IMac Intel running the latest OS. Does anyone have any ideas why the custom size will print properly from Photoshop, but not from Lightroom
Thanks in advance

I asked you a question in the Beginners forum. It usually isn't a good idea to post in more than one forum.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Printing envelope not formatted correctly on custom size 8.75 by 5.75

Printers and All-In-Ones running win 7 64 bit, officejet 8600 pro all update current, In works 2007 word processor or 2011 Hallmark card progam. downloaded latest driver and reinstalled same (deleted original dr and rebooted first). Envelope is correctly positioned, address prints at top of flap side return address is missing. On plain paper (8.5X11) test print, address & return address appears to be in correct position.

I have the same problem with the same size paper (aka Invitation or Statement size), and have an additional problem with printing to the corresponding envelope size which is a Standard A9 (5.75"x8.75"). These are both standard size papers for the U.S. and are used in printing wedding invitations. I don't understand why there are programmed sizes for Japanese stationary, but not for all standard U.S. size formats (that will fit in the main feed tray) or the ability to create a Custom Size format.
Because these features weren't available, I ended up paying a local printer to print my New Year's cards (an expense I wasn't anticipating that equaled half the purchase price of the printer). And, since I can't print on the envelopes I will need to print labels, which I was hoping to avoid because I hate applying labels to envelopes.
HP, please update the software to allow customers to print to all appropriate Standard Size US formats or allow for customization, otherwise my next printer will be purchased from a manufacturer that does provide this ability.

PDF Image will not fill up entire custom size page

Fellow Forum Members,
I'm using Acrobat 6 and SnagIt 8. My screen captures with SnagIt are being saved in PDF format. But for some reason I can't figure out, the capture image is not filling up the entire 8" x 6" PDF custom size page. I keep on getting 1.5" Right and Bottom margins no matter what setting I use in Distiller or in SnagIt. It's like the image is refusing to resize itself to fill up the page.
Does anyone out there know of a way to screen capture an image at a 8" X 6" size and have it totally fill up a 8" X 6" PDF page? Is there a screen capture app that doesn't have this problem? Any help will be greatly appreciated. Thanks.

If you use Acrobat's built-in functionality of creating a new PDF from the clipboard it fills the entire page.

Mavericks Server; smbd: File system does not support 0x0, time/size attrs

So I recently installed a Mac Mini with Mavericks and Server 3.2.2 in the main office of my company and everything has been going well, minus a few expected bugs, until recently. Starting last week we've been experiencing random intervals where File Sharing stopped working altogether, and I'd been able to reboot and get it running again. Unfortunately, as I'm the Systems and Server Admin, I've been too busy to look at the logs until now (following the degradation of one of the drives in our DAT-Optic RAID system, I figured it was time to make it a priority), and I'm seeing dozens of entries in the system logs regarding the process smbd with file system does not support errors.
Here's an example.
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.131 AM smbd[602]: File system does not support 0X40000, file attrs
As far as I can tell, nothing else has changed in our system except for the fact that one of the drives died and was rebuilt as of yesterday (these smbd problems extend to last week shortly after I updated to 3.2.2 I believe). Any help would be much appreciated. I would normally first attempt a repair permissions to see if the issue is related to a bad plist somewhere but the last time we did that, our ACLs were duplicated across our file share and often incorrectly. I'm not sure if it's just me but the last Mac Server software I used was Snow Leopard Server (when it was still a full OS version) and it was infinitely more stable than what I've experienced thus far with Server 3. Anyway, I appreciate any help/advice that can be given and I apologize for the rant.

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

[BUG] Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut and does not have a custom one.

Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut which is `command + shift + [` and does not have a custom one.
I tried "delete" key which is backspace for Windows. It will do delete identical to "delete X" key (which is delete key for Windows).
Sidenote: `command + shift + \` is to go back in views (switch views), not folder structure.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

Pass on lot size" function not supported in costing runs

hi when i am doing cost estimate through ck40n i am getting following error.
Pass on lot size" function not supported in costing runs
Message no. CK463
Diagnosis
You have selected costing variant PPC1 for the costing run. The Pass on lot size indicator is set in this costing variant. Costing variants in which this indicator is set cannot be used by the costing run.
System Response
The costing run is not created.
Procedure
You have the following options:
Reset the Pass on lot size indicator in costing variant PPC1 so that the lot size is not passed on.
Use a different costing variant in which the Pass on lot size indicator is not set.
if any one had found any same king of error please help me in fix it.
thanks
kareem

Probably this might be the cause
Sales order by Costing
Check out the below
Pass On Lot Size
Definition
If this indicator is selected, the system determines the costing lot size using the lot size of the highest material in the BOM and the input quantities of the components.
Use
1) Do not pass on lot size
If this indicator is not selected, the materials further down in the structure are costed in accordance with the lot size in the costing view of the material master record. When the materials in the next-highest costing level are costed, the costing results of the semifinished materials are converted to the lot size of the finished material to calculate the material costs for the finished product.
2) Pass on lot size only with individual requirement
In the MRP view of the material master record, you can specify that a material is planned as an individual requirement. If such a material is added to another material, costing uses the lot size of the highest material.
3) Always pass on lot size
Here, the costs for all the materials in a multi-level BOM are calculated using the costing lot size of the highest material. This function is used principally in sales order costing.
If you are costing sales orders using product costing for a material with a multilevel BOM that is produced in-house, choose 2) or 3) . For those individual requirements materials, from a business management point of view it is recommended that the order lot size be used when costing the material components going into the finished product. On the other hand, materials subject to collective requirements are generally costed using the costing lot size in the material master record.
Thanks

Terrible interlacing when exporting QT to custom sizes -- but not presets?

Hiya,
Background: I've been capturing 1080i HDV footage, editing in iMovie. I export from iMovie to Quicktime to share with folks, using the 'Expert Settings' option to manage size and quality.
Problem: Movies look OK when I use some of the size choices in the menu, like NTSC "720x486 16:9". But if I try to enter in my own custom 16:9 dimension, e.g. 800x450, the video appears to be the same size on screen but looks lousy. Specifically, there is a clear interlace artifact in any areas with motion.
I'd stick with the NTSC outputs as they look OK when played in QT player, but the aspect ratio is always messed up when played inside a web browser. And I'd like to choose other sizes, like 400x225 for web playback etc.
Here's a screenshot:
http://homepage.mac.com/jasonacook/dvinfo/demo.png
Note that the settings (apart from size) are the same for both: I'm not using/changing deinterlacing, adjusting aspect ratios, etc. The only difference is that I used the drop-down 'NTSC 720x486' choice in the first, and manually entered 853x480 in the second. (As I understand it, 853x480 = 720x486 w/ the whole square/non-square pixel thing)
Any ideas what's going on? I'd like to use some 16:9 proportions other than the drop-down choices without having the picture look so interlace-y. How on earth does Apple make the deinterlacing look so good in preset sizes, that I can't seem to duplicate otherwise (not even in Compressor)?
Thanks!
Jason

Do you have QuickTime Pro? If so, one way to bypass the "Custom" size is to export with QuickTime Pro instead of iMovie.
Open the "Timeline Movie.mov" that's inside the iMovie project. (Control-click on the project icon and choose Show Package Contents from the popUp menu. The Timeline Movie.mov file is inside the Cache folder. Double-click on it to open in QuickTime Pro.)
Press Command-I (that's an eye) to open a window that shows the movie size. Drag the resize thumb in the lower right corner of the movie to the size you want.
Now do your export, but instead of configuring a custom export size, choose the "Current" size setting.
For testing, you may want to try this on a small chunk of the Timeline.mov. Copy a few seconds of the movie, create a new movie, and Paste. Export that.
Karl

Custom sizes not supported in 10.8

Similar Messages

Maybe you are looking for