Custom specifics

Hi,
can we developpe some programmes (customer specifiques) and apply them like the Oracle Patches with drv extensions ? Is it a usule practice ? If not any document that oracle does not support that ?
Many thanks.

You can manage to have your own custom code/patch for your custom modules as long as you do not touch Oracle Apps modules since it is not supported.

Similar Messages

  • MDG BP(role=Customer) vs MDG Customer

    Hi All,
             As I understand,using the Supplier MDG,it can  create a BP either as a Vendor or a Customer depending on the Supplier role chosen.
    When EHP6 MDG comes with a Customer object,what will be the overlap between MDG-Supplier(role=Customer) vs MDG-Customer.
    My questions:
    (1) I am unable to understand the difference between creating a customer only and creating a customer via a BP(using BP-Customer CVI Integration)
    (2) If I can create BP as a customer in the SAP provided MDG-Supplier package(ERP6 EHP5) ,why its always referred to as Supplier in SAP documentation.
    Regards,
    Premjit

    Hi Premjit,
    First, if you use MDG, you'll always create a business partner record (table BUT000) on your MDG hub. If CVI is active and you've chosen the appropriate BP roles for creating a customer and/or supplier, the system creates entries in the ERP specific customer (KNA1) and/or supplier (LFA1, LFB1, LFM1) tables, too. So you're right, choosing the customer role in MDG Supplier in EhP5 can create a customer record via CVI, too. But there are some impacts if you do this that you should keep in mind:
    1) Checks
    EhP5 does not yet support the checks for the Customer (e.g. required fields and so on). This can cause some trouble when CVI tries to save the data. Saving a customer might fail due to invalid data!
    2) Data Maintenance
    You cannot maintain customer specific data in EhP5. The out-of-the-box UI supports supplier specific fields (general data, company codes, purchasing organization) only. This features comes for the customer with EhP6 in a customer specific UI.
    The data that a customer would receive in EhP5 is the common data that customers and suppliers share with the Business Partner (addresses, bank details, and so on). Customer specifics like general data, company codes, sales orgs, cannot be maintained in MDG EhP5 (without custom enhancements).
    Best regards
    Michael

  • Changed Database Service Tier resulted in lots of "Timeout-expired-errors"

    Last night I changed database service tier from Web Edition to Standard S0. Since then we are getting a lot of errors like this:
    "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
    Before the change we had no such errors. I have tried to make a new deployment of our cloud services but it doesn't change anything. It still fill the error logs with timeout-expired-errors and the site itself seems to be significantly slower than before.
    What's the problem? I assume the Standard S0 service tier should be sufficient in performance. We don't have much traffic on the site. 
    Hope someone can shed a light...

    Folks we know that changing business models is a hard thing to do.  In the Web/Business case, you pay on size of the DB and you get whatever performance we have at the time.  Sometimes this is great, other times this is ok and sometimes performance
    is very poor.  Customers have given us feedback that this unpredictable performance is very difficult to deal with.
    Using this feedback as a key input, the business model for Basic/Standard/Premium is $/perf.  As Jan points out below, understanding what resources your consuming is a great first step before moving to B/S/P.
    Your mileage may vary here.  Many customers see a decrease because of this business model change.  Others see no impact, and some will see an increase if their DBs are very small and consume a lot of resources.
    Jan, I and the team would be happy to help customers move into the new business model.  To have great conversations will need some customer specifics that aren't best shared in a public forum.  guyhay@microsoft is my email if you'd like to have
    that conversation.

  • Enhancement in the Master data Tab in the BP transaction

    Dear all,I need to create news fileds in the Master data tab in the BP transaction. This fields are not imput fields but the content of this fields are customer specifics number which will be generated when creating a BP.  This numebr will be generated in the BUT000 Table in the BP number field.
    My Question is : How can i create New Fields in the Master Data Tab, is it possible to use the EEWB for that or not ?
    thanks in advance for ur help.
    liliane

    Hi liliane,
        You can use eewb however it should be used very cautiously as once changes are made there are  tables and attributes that are created correspondingly. I mean activities like Bdoc creation for the fields added happen simultaneously and you may not be able to revert changes.
    Thanks,
    vivek

  • How do i select a custom paper size on the 6500A , specifics 18cmX26cm

    I want to print on a specific paper size, 18cmX26cm.  The suggestions from microsoft don't accuratly display my features or windows or the tabs that they say to click.  Also your forums seem to mislead the same information.  For the money I paid for this printer is not what I expected and very disappointed.  The lack of info is appalling, and confusing and just down right frustrating, leading me to conclude that your all as crazy as I am for trying to do something over and over, and expecting different results.   

    Hi,
    Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
    From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
    From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
    You need to select right custom size from the application.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I was told by Borders customer service that I have to add them as a "trusted site" to avoid an error message when sttempting to use the shopping cart. Is this true, and how do I do it?

    When I go to "checkout" on Borders.com, I get an error message. The message is as follows:
    [ServletException in:/ConsumerDirectStorefrontAssetStore/ShoppingArea/ShopcartSection/body.jsp] null'
    I have tried refreshing, clearing cookies, and everything I can think of. Customer service told me it had to do with security settings, and that I had to add it to my trusted sites. I have never had to do this before, so I'm jsut wondering if this was true, and how to do it.

    Are they multi-function units? Do they include a scanner? Most people call these multi-function copiers, not printers. Printers don't have a scanner in them.
    Give us some specifics as to the brands and models you have tried.

  • Installing SSD in customized HP Pavilion dv6t-7000 CTO Entertainment Edition Notebook

    I have a customized dv6t-7000 entertainment notebook and I would like to install an SSD to boot the OS.  According to the manual, or at least from vague pictures in the manual, the SSD installs directly to the motherboard.  It doesn't specify what type of SSDs the available replacement parts are and I can't view the specifics on the HP parts replacement website either.  I am wondering what type of SSDs are compatible with the port in the laptop, is it for mSATA (SATA II or III) or for 2.5" SSDs.  I don't know too much about SSDs, but I want to be able to find a compatible part.  I currently use the optical drive, so I don't want to switch it out for a hard drive chasis.  I understand that method would use a 2.5" SSD.   If anyone can clarify what type of port is in the laptop and what SSDs are compatible, that would be awesome!
    This question was solved.
    View Solution.

    Here is the Service Manual which will be helpful:
    Manual
    If your laptop is an Intel model then you have an mSSD slot which looks like a wireless slot. 
    See Page 71. Unfortunately the mSSD slot is a bear to access. If taking the laptop almost all the way apart is something you can do, then an mSSD is in the cards for you. If not, I strongly suggest simply replacing the mechanical drive with a 2.5 inch SATA SSD drive. Even if you can get the mSSD installed, configuring the system to boot from the mSSD is also very hard if you also want to have a regular hard drive for storage. It is easier to apply the mSSD as an acceleration cache drive, making the main hard drive perform more like an SSD. 
    This is one of our more "advanced" topics here so if you have any more questions please post back and we can help some more. 

  • Consignment Customer in Abroad

    Our client have, above said scenario  called consingment customer in abroad
    process is as below in functionally our organisation is following.
    We send material by providing all the customs related documents, like
    Pre-shipment invoice, Pre-shipment packing list ( We call as provisional documents )
    by submitting those documents we get shipping bill from customs. ( this also a provisional shipping bill )
    subsequently we also create excise invoice and ARE-1.
    Once our customer received the material, they store the material in depot and sell the materials to diffent customers.
    if our customer able to sell all the material with in a year we send commercial invoice.
    other wise praportionatly we create the commercial invoice and remaining material will return by customer to india.
    Here I would like to know how can we configure in system. what are the possible options we have.
    Thanks in advance.
    Regards,
    Rajesh.

    https://wiki.sdn.sap.com/wiki/display/ERPLO/ConsignmentStockProcessing
    Some of the specifics in the scenario mentioned by you will be as under:
    Consignment Fill-up:
    1. Use Proforma invoice for Provisional Shipping Bill
    2. Excise Invoice and ARE1 will have to be configured based on Delivery Document
    Consignment Issue:
    1. Follow the Consignment Issue Process for the quantity to be billed.
    Regards,
    Rajesh Banka

  • I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

    I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

    Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
    LN

  • Is it now easier to create custom workspaces in Bridge CS4 &CS5

    I use CS3 and I swear to god this is the most frustrating and hard to remember procedure after I lose my saved Bridge workspace settings. Once I figure it out, save the settings with a custom name, it's out of site and out of mind, forgotten years afterward.
    I spent all morning trying to remember by trial and error how to recreate my modified filmstrip workspace which has one horizontal divider (major PITA to remember how to implement) separating Folder panel from Metadata panel on the left column, Preview pane in center with Content thumbnail strip separated by a horizontal divider underneath and the right column collapsed by the extended Preview pane. Very simple and uncluttered setup.
    I didn't want to use Snow Leopard Mac Migration Assistant transferring my Bridge Workspace prefs (which I couldn't find on my OS Tiger hard drive pulled from my dead 2004 G5 iMac) to my newly purchased 2010 Mac Mini with Snow Leopard attached to the dead imac's HD through a firewire enclosure. Just reinstalled CS3 from my licensed CD and downloaded all updates using Adobe's online Update system.
    Only one post on how to create Bridge workspace using horizontal dividers came up in a search and it turned out to be wrong.
    I finally figured it out by first choosing Horizontal Filmstrip mode which has the left column in a tabbed layout, the center with Preview/Content including a horizontal divider and the right column with a horizontal divider and tabbed windows. Next I removed all tabs on the left except (Folder) and kept one tab on the right column (Metadata panel).
    Here's the key that gets missed and forgotten in all this. As I click on the Metadata panel tab and drag from the right column over to the left column there is a blue highlight surrounding the entire column which gets most folks to let go upon which you get the disappointing two tabbed left column with no horizontal divider.
    HERE IT IS...WATCH FOR IT...there is a blue one line bar that you can get to appear AT THE TOP of the left column when hovering the dragged tab just above the tab already in place in the column. Most don't see or know about this blue highlight bar showing up like this. And even then INTUITION says the blue horizontal divider highlight bar should appear in the middle of the left column being dragged and dropped to. But since no one sees it or maybe even knows about and how to get it to highlight, it gets forgotten about and the confusion and frustration continues.
    I tried to post this in the Bridge Feature Request which now takes me to a Photoshop.com site requiring a new account be made for signing in. After I sign in, go to Bridge section, there's no GUI allowing me to Post New Topic, so I posted here.

    2 clicks in Bridge Help, huh? Yeah. I already know how to create a workspace. It's the specifics of creating a horizontal divider that I'm having trouble remembering how to do and what to search for when I forget.
    2 clicks didn't get me to the page on how to create horizontal dividers which is what I entered into Bridge Help Search from the beginning before I posted here. It only indicates how to make and move panels by grabbing the tabbed column which I already knew.
    Put yourself in the place of someone who has to recall how to do something this deceptively simple and then know what to ask and search for after years of not having to deal with this. Would like you to find in the Bridge Help (search or whatever) where it says blue single line highlight bar lightens up to tell the user that a horizontal divider is being created.
    Also see if you find instructions in Bridge Help that say..."Don't confuse this single line highlight bar (which if you have a fast video card will barely stay on long enough to notice or distinguish from the regular blue highlight bounding box when hovering between columns trying to create single square shaped panels with an adjustable divider bar but only getting tabbed unadjustable columns".
    Heck, put yourself in the place of a newbie trying to figure this out. I've been doing this digital imaging stuff since '98 starting with Photoshop 4 and I'm having trouble.
    Thanks for the directory location for Bridge's workspace. Don't know why doing a search using workspaces didn't find it. I finally hooked up my old G5 imac HD and found it along with the other "!!" workspaces but mine wasn't custom named which I may have altered slightly from when I first created it that originally included my name. I only found Workspace Horizontal Filmstrip Metadata.workspace. Wish there was a way to search where this file is at on the HD, but there's always google for finding that kind of stuff I guess.
    Didn't find the "row of workspace names located at the top left of Search entry" in Bridge CS3.
    But really this post is a disguised rant/feature request asking Adobe to allow instructions to show up by entering search terms... "Creating a Horizontal Divider In Bridge Workspace" when this situation comes up.
    I'm hoping this rant will get indexed by google and show up in a search years later just so I'll remember this.

  • Oracle Custom Workflow Redesign best practices

    Hi All,
    Morning , need some help with this scenario.
    We are in the process of redesigning existing developed custom Oracle Workflows in our system ( Oracle Apps Release 12.0.6 )
    hence wanted to know if there are steps or guidelines/best practices which could be followed in this situation on points like handling performance issues with the workflow , how to handle the purging of the obsolete workflow data , design steps regards notifications, how to handle error conditions with workflow activities and how to retry activities ( means if any activity within the workflow process shows error how it could be retried or re executed in real time without any delay).
    means any pointers which could be considered for this redesign actvity , any best practices document/steps and guidelines would be really very very helpful here...
    Regards

    This is a very broad question - narrowing it to specifics might help folks respond better.
    There are a lot of documents on MOS that refer to best practices from a technology stack perspective.
    Oracle Workflow Best Practices Release 12 and Release 11i          (Doc ID 453137.1)
    As far as functional practices are concerned, these may vary from module to module, as functionality and workflow implementation vary from module to module.
    FAQ: Best Practices For Custom Order Entry Workflow Design          (Doc ID 402144.1)
    HTH
    Srini

  • Custom Page Sizes doesn't work

    I have set up a few custom page sizes but when I try to used them, it doesn't work. Well once in blue moon it does.
    I can't find a consistent way that it does. I have read all the online help and followed the process to the letter, but when I select the page size under Paper Size it doesn't change the paper size.

    J,
    There definitely are problems with Custom Page sizes. I don't have enough specifics to formulate what I would consider good feedback to Apple, something that they could easily act on.
    I can tell you that if you set your System Preferences > International > Formats > Measurement Units: US and Set your Pages > Preferences... > Rulers > Ruler Units: Inches, you can create the size you want and it will stay selected and not pop back to the default. Here's what I have:
    Again, I know that there's a problem. If you wish, you can use the setup I outlined and get the job done and later take up the cause of fixing whatever is going on with the CM units.
    To Fruhulda, you noted that 9 cm by 6 cm is a size that fails as J described - and I confirmed here. However to get a successful size I found that I could use 3.53" X 2.35" (8.97CM X 5.97CM), a very close compromise. There clearly are problems with measurement units in Page Setup.
    Regards,
    Jerry

  • PKCS#11 - JAVA - Hardware crypto with custom algorithm!??

    Hello!
    I'm wondering if it is possible to use the SUN provider in JDK1.5.0 for PKCS#11 with a hardware based crypto card which does not use any of the algorithms specified in the field guide of PKCS#11 for jdk1.5.0. Instead a custom algorithm that is implemented on this card will be used for encryption/decryption.
    It should be transparent for the application what kind of algorithm that is used to encrypt/decrypt since I will send the data that will be encrypted/decrypted to this hardware card.
    If it is not supported by the sun provider. What would be necessary to do to get this to work?
    The card I'm about to use has an PKCS#11 API.

    At this moment I don't really know the specifics on these hardware accelerators, hence my question. If it not is an algorithm that is in the refrence guide for PKCS#11, then I would like to know if there's any way to use the algorithm anyway using the PKCS#11 "wrapper" in jdk1.5.0.....
    And a follow question, If it is not supported what would be the easiest way to use the PKCS#11 API of the hw -card.... I suppose to write some JNI code to send in the data to be encrypted and get the encrypted answer back?
    /Henrik

  • Automating customer expenses / credits in SAP BYD

    Has anyone found an automated way to load credits or expenses for a customer?  Currently we have a considerable number of expenses to credit to a customers account.  Our current process is to input credits for a customer in the receivables and apply them to projects, then apply them to customer invoices.
    We also would like to find a way to apply these same types of expenses to products/materials.
    We have a small staff and it would be preferable to have some automated way.
    We have requested an excel upload process similar to customer invoice upload, but the current response is that does not exist and there is no timeline for this enhancement.
    We are using SAP Business By Design.

    Are you running By Design on the cloud or do you have an on-premise system?
    I am guessing users use a browser or NWBC to connect to the system?
    My understanding is that your bydesign environment may support the use of Netweaver transactions like LSMW or SHDB BDC sessions. Additionally you may be able to use a third party solution to communicate with your SAP environment. In all likelihood this may be based on a standard API if one exists. I thing some of the answer will lie in the specifics of the version you are using.

  • Sealing Custom MP with dependencies

    Hello everyone.
    Trying to understand specifics of sealing custom MP. (OpsMgr 2012 R2)
    1.When i'm trying to seal my MP using MPSeal.exe. I get an error :
    Attempting to seal ManagementPack file: D:\SCOM\BSPb.DA.Management.Pack.xml
    : Verification failed with 28 errors:
    Error 1:
    Found error in 2|BSPb.DA.Management.Pack|1.0.0.0|BSPb.DA.Management.Pack|| with message:
    Could not load management pack [ID=Microsoft.Exchange.15, KeyToken=31bf3856ad364e35, Version=15.0.663.19]. The management pack was not found in the st
    ore.
    Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPack with name Microsoft.Exchange.15 was not found.
    at Microsoft.EnterpriseManagement.AggregateStoreManagementPackManagement.GetManagementPack(String name, String keytoken, Version version)
    at Microsoft.EnterpriseManagement.Configuration.ManagementPackReference.GetManagementPack()
    As I understand, I need to have these 28 MPs, on which my Custom MP depends in the same folder to make proper sealing. Am I right?
    2. Can I copy all these sealed MP from production SCOM server, or I need to download them one by one from site?
    3. How MPs depend on each other? For instance, in future I want:
    - To upgrade system MPs, on which my custom depends.
    - I want to change and upgrade my custom MP .
    Thanks in advance.

    Hi!
    ad 1: Yes, you need all the MPs available in a folder and include them using the MPSeal switch /i
    Please refer to
    http://technet.microsoft.com/en-us/library/hh457550.aspx
    ad 2: You're not able to export them from your SCOM Management Group (you would be able to do by PowerShell but only as unsealed XML and not as sealed MP). So you've to download them again in case you don't have them available already. But...
    a) if you're using Visual Studio Authoring Extensions, you have most of them available here: C:\Program Files (x86)\System Center 2012 Visual Studio Authoring Extensions\References\
    b) if you're using Silect MP Author, you have most of them available here: C:\Program Files\Silect\MP Author\ManagementPacks\
    c) if you need the MPs from Microsoft Products (like Exchange above) you could find them in the following folder on the computer where you extracted the MSI you downloaded: C:\Program Files (x86)\System Center Management Packs\
    ad 3: You can upgrade any MP at any time to a version number higher than the one you've in your custom MPs references (would be tricky to "downgrade" anyways :-) ). You just cannot remove a MP you're referencing in another one. In such a case you
    have to remove all the depending MPs either, what applies to override MPs as well.
    Cheers,
    Patrick
    Please remember to click “Mark as Answer” on the post that helped you.
    Patrick Seidl (System Center and Private Cloud)
    Website: http://www.syliance.com
    Blog: http://www.systemcenterrocks.com

Maybe you are looking for