Custom XML worked on 10.2.0.4 after upgrading to 11.2.0.1 it fails

Hi
Our developers had written custom jobs in ebus11i using XML publisher , now we have upgraded to 11.2.0.1 and it stopped working
We have logged a TAR and Oracle say they dont support custom code
Anyone can help
Ahmed Jassat
Oracle APPS DBA @ Medscheme
[email protected]

user13605085 wrote:
Hi,
We have EBS 11.5.10.2 on HPUX with 10.2.0.5 database.We want to migrate it to EBS 12.1.3 with 11.2.0.3 database.
We also have 10.1.4.3 SSO with AD.
Our approach is:
First Phase:
1) From source(HPUX) take export(expdp) backup of 10g database.
2) Install 11.2.0.3 database on Target ie,on Linux server.
3) Import database on target 11g database.
4) Link 11g(Linux) database with 11i(HPUX) application
5) Re-Integrate SSO with 11g database.
Second Phase:
1)Pre upgrade steps on 11g database(linux)
2)Install file system of EBS 12.1.1 on linux with upgrade.
3) Upgarde steps
4) Post upgarde steps.
Is it feasible? Please suggest.Please do not post duplicates -- Upgrade EBS 11i(10.2.0.5) on HPUX to EBS R12(11.2.0.3) on linux
Thanks,
Hussein

Similar Messages

Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

If you are not using Cellular Data, turn it off.

How do I get sound to work on my early 2009 iMac after upgrading to Yosemite?

The sound on my early 2009 iMac has stopped working after upgrading to Yosemite from 10.6.8.
It still makes sound when I boot it up, so I don't think this is a hardware issue.

Hi qhaine,
Thanks for the question. After reviewing your post, it sounds like you are having trouble hearing sound from the iMac speakers. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Troubleshooting issues with no audio from built-in speakers on Macs
Thanks for using Apple Support Communities.
Have a nice day,
Mario

XML load error - when moving table data after upgrade

Greetings:
Background:
Previously in our 2.2 instance, we would use the Data Load/Unload feature of APEX to move data in the form of XML from instance 1 to instance 2. This woks well because it moves images also (BLOB)
What Changed:
Recently we did the upgrade to APEX 3.0. The tool is working well, but we are having issues uploading XML data in the same manner we used to. The process wizard works up until time for execution.. the following error message is seen.
XML load error.
Return to application.
Assumption:
I do not believe this is an XML file issues because the file I am testing the process with is from the EMP table, and is from the UNLOAD option on the same DB and SCHEMA.. (testing is unloading the data, than re-loading the same data to the same place)
Internally some permissions or something internal must be missing.
Assistance or suggestions on where to look is greatly appreciated.
Regards,
Tim

Tim,
Sorry for the delay - that silly day job keeps getting in the way.
Here is a small procedure you could use to take the XML data file format exported from Application Express and import into your table. This uses the Java-dependent DBMS_XMLSAVE package, which avoids the issue mentioned above.
create or replace procedure load_xml(
    p_clob   in clob,
    p_schema in varchar2,
    p_table in varchar2 )
is
    l_insCtx dbms_xmlsave.ctxType;
    l_rows   number;
begin
    l_insCtx := dbms_xmlsave.newContext(p_schema || '.' || p_table);
    dbms_xmlsave.setDateFormat(l_insCtx,'yyyy-MM-dd''T''HH:mm:ss.SSS');
    l_rows := dbms_xmlsave.insertXML( l_insCtx, p_clob);
    dbms_xmlsave.closeContext(l_insCtx);
end load_xml;I then ran the following quick test on apex.oracle.com just for verification.
declare
    l_xml varchar2(32000);
begin
    l_xml := '<?xml version="1.0"?>
<ROWSET>
<ROW>
<ID>11645117496276327</ID>
<FLOW_ID>30072</FLOW_ID>
<NAME>F11645117496276327/no_image_found.gif</NAME>
<FILENAME>no_image_found.gif</FILENAME>
<MIME_TYPE>image/gif</MIME_TYPE>
<CREATED_BY>JOEL</CREATED_BY>
<CREATED_ON>2007-03-14T05:06:38.000</CREATED_ON>
<BLOB_CONTENT>474946383961C800...(data removed for this example)...41000003B</BLOB_CONTENT>
</ROW>
</ROWSET>';
    load_xml( l_xml, 'MY_DB_USER', 'MY_APEX_FILES' );
end;It's now simply a matter of how you get your XML file(s) into a CLOB to call this procedure. The options include:
1) Just pass in a VARCHAR2 as I did in the example above, which would limit you to roughly 32K.
2) You could use DBMS_LOB.LOADCLOBFROMFILE to read it from the database server filesystem.
3) You could upload the file via an APEX application (or some other means within APEX), you could convert the BLOB to a CLOB, and then call this procedure. If you need help with this method, let me know.
Don't forget - as yet another alternative, you could always contact Oracle Support to see what could be done about that underlying database bug.
I hope this helps.
Joel

IPhone 5s no longer works with my JVC car stereo after upgrading

Hello!
I updated my iPhone 5s to ios8 last Wednesday (the 17th). When I drive, I synch my phone to my car stereo system (a JVC unit -- I can't recall the model number but it was installed just a year ago). After the upgrade, it worked fine. But on Sunday morning the phone experienced a hard crash and I had to reboot it by pressing the home and sleep buttons together. The phone came back without any further incident.
When I tried to make a call later that night I found that instead of my phone being active on my phone it tried to play music instead. I couldn't figure out how to stop this, so I turned off Blue Tooth. And now, when I try using the phone the Blue Tooth seems to synch up, but the phone cannot dial out -- I get a "called failed" message on the car stereo screen. If I look at the phone, I see that the phone has been activated, but it isn't dialing out. And then the phone will make bogus calls to an unrecognized number, or to a non-number. It will do this every 30 seconds or so. If I dial the phone manually, the Blue Tooth seems to work and I can talk to people hands free as usual. But when the call ends (and I don't always have a "call end" button showing on the JVC screen) the phone will again attempt to dial a bogus phone number.
The only thing that has changed is I upgraded my iPhone to ios8. Are there known issues around Blue Tooth connectivity? I also reset my phone to factory specs and reinstalled ios8 from my PC via the Lightning cable. This didn't change anything (I did that on Sunday evening). The Apple trouble shooting pages are of no help with this (I've already looked at them). I would really appreciate any help anyone could give me -- I think I've tried everything I know to do.
Thanks!

I upgraded to ios 8.0.2 and it still won't work. The phone will synch to the JVC blue tooth, but will not dial out. The phone is activated and it has the screen that indicates it is dialing but it isn't. And then the blue connection drops and won't reconnect.

Iphone not working on my Alpine car stereo after upgrade to 2.1

Any ideas about the problem.
Older ipod works fine.

THANK YOU SO MUCH!
You have no idea how frustrated I was last night. I couldn't figure out what the heck the problem was, but I'm having the same exact problem as you. I'm going to try this fix and see if it works.

ITunes 10.5 doesn't work on Win7 64 bit PC after upgrading

I a problem starting ITunes on my computer using the latest update (10.5) I already removed all apple applications and re- installed them. It worked for a short while but not for long. I use a Win 7 PC (64 bit). even tried to install an older version of ITunes and then let the automatic update do its work. and again: no response when clicking the iTunes icon or double click the program icon. So I am not able to play music on my computer.
Anyone who has a solution?

Well, I gave up and uninstalled Java 7 and the ASDM. After installing Java 6 update 27 and then reinstalling ASDM, it works fine again. I installed Java 7 again while leaving 6/27 installed and had the same issues. Uninstalled 7 again and everything works fine.
I really wish Cisco would write Java code that is forward and backward compatible. It seems we have this issue every few Java updates at which time Cisco will release something like ASDM v61557 or the like if they admit there is an issue at all. Performing the correct calls instead of taking proprietary shortcuts eliminates this problem with incompatible code between releases.
---RWR

Unable to install flash player!! Have tried uninstalling and all other trouble shooting options listed. The installer starts working, closes safari successfully, then shortly after, it stops installing and just states "installation failed. Click 'finish'

I have Safari 8.0.5 and have a mac running OS X Yosemite 10.10.3
The issues started when entering a site that required flash. I received a message that I had to upgrade flash and when attempting to upgrade the system crashed. I then tried to uninstall and reinstall and now get the below error, which directs me back to the install site which starts the process all over again and I'm not getting anywhere!!! Please help!!!

Hi karis20774009,
To accurately identify the issue, and help us improve the online installer experience, we would really appreciate it if you could do the following for us:
Perform a speed test on your internet connection. There are a myriad of sites that do this, for example, www.speedtest.net,www.speakeasy.net/speedtest, www.dslreports.com/speedtest, and your internet provider may also have a page in their support/help section to do a speedtest.
Goto Location --> ~/Librarly/Logs/Adobe_ADMLogs
Upload the two log files (Adobe_ADM.log and Adobe_GDE.log) using the instructions posted here https://forums.adobe.com/thread/1408375
Reply back to this thread with the results of the download speed test and the URL to the uploaded log files.
In the mean time, the offline installer is posted at Installation problems | Flash Player | Mac page in the 'Still having problems' section should work for you.
Thank you in advance.
Piyush

All games work fine with Windows 8, but after upgrading to 8.1... I'm sad..

Are there any guides out there that can instruct me how to upgrade my laptop properly? I upgraded my laptop back in 2013, ever since then.. I decided not to play games high end games anymore due to experiencing very low fps on games such as Dota 2. I mean come on!! DOTA 2? Well anyway, I decided that I should fix this problem and stop being a workaholic idiot.
My laptop is GE40 2oc Dragon eyes. Please help me out. :(

You may refer to the web below for the upgrade steps.
http://event.msi.com/2013/win8-1/Update.html
After you finished the upgrade, try to update your intel/nvidia driver.

Scheduling scenarios don't work after upgrading 10.1.3.5 to 11.1.1.6...

Hello~
I upgraded ODI version 10.1.3.5 to 11.1.1.6 without any error.
However although I restart agent, scheduling scenarios don't work on time.
So I regenerated one of scenario using ODI studio menu and then this scenario worked successfully on scheduled time.
After upgrading, do I have to regenrate whole scenarios?
Isn't there any other workaround?
Edited by: user612431 on 2012. 5. 15 오후 10:42
Edited by: user612431 on 2012. 5. 16 오전 2:29

Hi, I have copied the jar file in users/appdata/.../userlib also. But let me go through this document and see what it says. I will get back to you. Thank you very much.
But tell me if I understood this correclty:
Inorder to upgrade from 10.1.3.5 to 11.1.1.6, I have executed the following steps so far:
1) I ran the RCC on my old repositories to check if they are consistent to migrate and it was successful.
2) Copied the E*,M*,W* xml files that RCC created into the oracledi.common\...\sqlserver\patch\ and oracledi.sdk\...\sqlserver\patch folders.
3) Cloned the existing master and work reps of 10g.
4) Installed the ODI 11g, but did not create the master rep and Work rep in 11g hoping that I would upgrade the existing cloned 10g repositories.
Now my understanding after going through some documents online is that UA uses the cloned repository details (master and from there it gets the work rep details) and 10g supervisor details that we provide and connects to cloned master and work reps and upgrades them. I do not know what this jdbc error is? Because I tried and could also create a brand new master repository in the 11g using ODI studio, now if 11g could not connect to DB using the jdbc how could it have created the repository. If 11g connects to DB I am assuming that UA should also be able to connect right?
Please correct me if my assumptions are wrong.
Thanks
V

Camera connection kit not working. After upgrade?

Camera connection kit used to work perfectly with Nikon D3100. After upgrade it will not work at all neither from the camera usb nor from de card. Help

Try resetting the iPad. Press & hold the Home and Power buttons together for 10+ seconds , ignoring the red power-off slider until the Apple logo appears.

Reports quit working after upgrade to SQL Server 2008

Folks,
I'm running Visual Studio 2008 (sp1) and recently upgraded to SQL Server 2008. Reports worked fine until after upgrade. Now I get the "Login Failed" error message.
Here is code snippets:
        CrystalDecisions.CrystalReports.Engine.ReportDocument oReport = new   CrystalDecisions.CrystalReports.Engine.ReportDocument();
        TableLogOnInfo LonOnInfo = new TableLogOnInfo();
        TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
        TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
        private Tables crTables;
        private Table crTable;
        ConnectionInfo crConnectionInfo = new ConnectionInfo();
            crConnectionInfo.IntegratedSecurity = true;
            crConnectionInfo.ServerName = Properties.Settings.Default.InstanceName + "
Instance";
            crConnectionInfo.DatabaseName = "DATABASE";
            crTables = oReport.Database.Tables;
            for (int i = 0; i < crTables.Count; i++)
                crTable = crTables<i>;
                crtableLogoninfo = crTable.LogOnInfo;
                crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                crTable.ApplyLogOnInfo(crtableLogoninfo);
            oReport.RecordSelectionFormula = xFormula;
            crystalReportViewer1.ReportSource = oReport;
Has anyone had this problem? Any help would be appreciated.
Terry

CR 2008 does not support MS SQL 2008 yet, meaning we have not had time to test it completely and add it to our supported platforms.txt file.
One thing I noticed is you are using trusted authenication:
crConnectionInfo.IntegratedSecurity = true;
Make sure you give access to all users, MS changed the security properties a lot since SQL 2005 and you can't simply log into any database now. If you have a DBA check with that person on how to configure NT Authentication or the Help file. You can also do a quick test and simply use MS SQL Server authentication to confirm if it's a user permission issue.
Try creating a report that doesn't use Integrated Security, check the box off on your data logon prompt in the Designer.

IMac 10.8 Internet sharing stopped working after upgrade from 10.7

My iMac 27 (10.7) with Internet Sharing enabled has been working perfectly since last year. After upgrading to 10.8, I noticed the up arrow flashes and goes to regular WiFi mode. Stopping/starting the service causes the up arrow to flash again and immediately default to WiFi. I removed Ethernet and WiFi options from Network settings and re-installed which solved the Internet sharing from flashing and defaulting to WiFi mode. However, connecting to the Internet sharing from other devices (iphone/ipad) does not work and will not connect to the internet. On the iMac, I'm able to browse the Internet without issues.
If I disconnect the Ethernet cable and plug into either my MacBook or MacBook Pro and enable Internet sharing, everything works perfectly and all my other devices can use the Internet.
Now sure how to further troubleshoot and resolve this issue. Any advice would be greatly appreciated. I should add that the iMac is running Mac OS X Server which was also upgraded to 10.8. I was looking inside the Server for security options that restricted internet access via Internet sharing. Nothing.
Thank you!
David

Thanks for your answer.
Unfortunately this isn't a solution for my problem. As I understood, you showed me that your IP addresses had changed after enabling/disabling internet sharing. I checked my IP addresses after enabling/disabling internet sharing by using "ifconfig" but they are the same as set manually before.
My other strange observation regarding the ping command has gone now. After switching on internet sharing I had to disconnect the ethernet cable and plug it in again. Then the ping between both computers is working (but still not internet sharing).
Anyway ... thanks for your help!

Windows 10: HP Deskjet 2540 wireless not working anymore after upgrade.

I was using Windows 8.1 and the printer was working fine via wireless printing. After upgrading it to Windows 10, printer stopped supporting wireless connection. It works through USB. I tried updating the software but the issue hasn't been resolved.

Hello MrBas,
Please perform the below mentioned steps that should resolve the issue.
Uninstall the existing printer software.
Restart the PC
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

ICloud not working on iPad 4 Gen after upgrade

iCloud is not working on my iPad 4 gen after upgrade to iOS 8. I have Yosemite beta and iCloud works on my iPhone, windows 8 and of course my mac with beta Yosemite. Does anyone else have a similar issue.

Reset iPad and the problem cleared up for now.

Custom XML worked on 10.2.0.4 after upgrading to 11.2.0.1 it fails

Similar Messages

Maybe you are looking for