Customer creation using BAPI with given customer number

Hi All,
Can we create the customer with our own customer number using the BAPI - BAPI_CUSTOMER_CREATEFROMDATA1.
Generally SAP Creates its own number using number range objects,but i want to create customer with our own specified number.
I found the BADI - CUSTOMER_ADD_DATA for XD01,but it is not working for BAPI.
Please give me the solutions.
Regards,
Srinivas.

Thanks once again.
The interface is like this NON-SAP (Front-end)
Mercator
SAP (Back-end).
and the volume of Date is more than 20,000 a day and mercator will put into the 'Q'.i do not think the data flow in front-end and back-end is authentic.
and lot of business logic is involved in these three systems.
I found the BADI for this,but it is not working for the BAPI.Please suggest any thing for BAPI - BAPI_CUSTOMER_CREATEFROMDATA1.
Regards,
Srinivas.

Similar Messages

Service order creation using bapi with repair order number

Hi experts,
Pls suggest me a BAPI to create a service order for those repair orders where a PGR has been done(for return delivery type : LR).
The plant should be 0260 with storage location wh01 and item category ZRRE
Creation of a service order with repair order type SM03 is not allowed in iw31.
thanks and regards,
Vijayb.

Hi prakash,
Thank u for the BAPI
But an error is being displayed saying that the REFURBISHMENT ORDERS CANNOT BE PROCESSED USING BAPI.
ERROR DURING PROCESSING OF BAPI METHODS.
This is while u pass the order type as either ZM03 or SM01or SM02 or SM03.
pls help me on that.
thanks and regards,
Vijayb.

Material Movement using BAPI with serial number.

Hello,
I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number. The confusion is some times it works fine for 3000 serial number as well.
Tried finding the reasion on every possible site. No results.
Thanks in advance for some solution.

Hello,
I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number. The confusion is some times it works fine for 3000 serial number as well.
Tried finding the reasion on every possible site. No results.
Thanks in advance for some solution.

HT204032 Why can you not use powernap with a custom order iMac with solid state?

Why can you not use powernap with a custom order iMac with solid state?
Find it quite ridiculous that a 3 year old mba supports it and not a new iMac

Agreed. Why wouldn't you want your Photostream updated while your iMac is sleeping? I am bummed about this.

How to create invoice using bapi base on delivery number with example

hi,
Pl give me one example to create invoice using bapi base on delivery number (PGI).

Use this code
* Pass the delivery no to the FM to create the invoice
 wa_vbsk-smart = u2018Fu2019.
 wa_komfk-vbeln = nast-objky. u201CuF0DF-----delivery number
 APPEND wa_komfk TO it_komfk.
 CLEAR wa_komfk.
* To fill the message structure
* l_wa_error-vbeln_vl = nast-objky. " Delivery No.
* l_wa_error-fkart = wa_ztab-bil_doc_type." Billing Doc type
 CALL FUNCTION 'RV_INVOICE_CREATE'
 EXPORTING
* delivery_date = 0
 invoice_date = v_date u201C<- date
* invoice_type = ' '
* pricing_date = 0
 vbsk_i = wa_vbsk
 with_posting = u2018Du2019
* select_date = 0
 i_no_vblog = ' '
 i_analyze_mode = ' '
 id_utasy = ' '
 id_utswl = ' '
 id_utsnl = ' '
 id_no_enqueue = ' '
 id_new_cancellation = ' '
** IMPORTING
* VBSK_E =
* OD_BAD_DATA =
* DET_REBATE =
 TABLES
 xkomfk = it_komfk
 xkomv = it_komv
 xthead = it_thead
 xvbfs = it_vbfs
 xvbpa = it_vbpa
 xvbrk = it_xvbrk
 xvbrp = it_vbrp
 xvbss = it_vbss
* XKOMFKGN =
* XKOMFKKO =

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Mass sales order creation using BAPI

Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandra

Hi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K

Material Master Creation Using BAPI

Hi,
I m using BAPI_MATERIAL_SAVEDATA for Material creation using BAPI.
Now the problem is , i have created a Screen exit long back in Purchasing view.. the corresponding Z field is created in table MARC..
How can i pass value to this Z field using BAPI.
i tried with BAPI_MARC.. my Z field is not coming in that structure.
Can anyone guide me how can this be achieved.
Thanks in Advance
Aravindh Mani

Hi,
The Function Module BAPI_MATERIAL_SAVEDATA has the options to pass the Z fields. There exits a structure parameters
EXTENSIONIN
EXTENSIONINX
in BPAI. In EXTENSIONIN pass the data and value part you can pass in EXTENSIONINX. So this will update the Z fileds in material
master .

Need sales order creation using bapi in oops

need code for sales order creation using bapi in oops

hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan

My Adobe Acrobat X pro is not opening after 1 month of Installing, it happens every month then I re-install to use it with my Serial Number again

My Adobe Acrobat X pro is not opening after 1 month of Installing, it happens every month then I re-install to use it with my Serial Number again

Hi hnssiva,
The answers to Pat's questions will help us get to the bottom of things. In the meantime, please check out this document: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html, as it sounds like you may be running into the issue it covers.
Best,
Sara

How to use BAPI with Decision Dialogue

Hi Gurus
would you please let me know how to use BAPI with decision dialogue in guided procedure .
I have a BAPI checking logon credentials for the user . how to use this BAPI for making decisions that is if the logon is correct then perform one process else go to logon screen again .
Thanks in advance
Regards Namita

Hi Namita,
1. Follow the steps mentioned in section <a href="http://help.sap.com/saphelp_crm50/helpdata/en/33/198141f906040de10000000a1550b0/frameset.htm">Exposing an RFC-Enabled Function Module as a Callable Object</a> to use the BAPI as a Callable Object.
2. Follow the steps mentioned in tutorial # 93 and 93a in the CAF Tutorial Center for the decision part.
Hope these helps.
Nilay

Create material master using BAPI .(Mat. internal number range)

I would like to create the material using BAPI. (Material is internal number range).
I am trying to create the material using BAPI BAPI_MATERIAL_SAVEDATA, but material number is required field as per BAPI documentation .
Can you please suggest me the function modules or BAPI to load materials which are in internal number range.
Regards
Badari

Hi ,
Use FM 'MATERIAL_NUMBER_GET_NEXT' to get next available material #.
You can use that material # in BAPI 'BAPI_MATERIAL_SAVEDATA'.
Cheers,
Vikram

My dad has an upgrade with his phone number, can I preorder the iPhone 5s with his number and use it with my phone number?

I want to preorder the iPhone 5s. My personal phone number is not eligible for an upgrade yet, but my day's phone number is. He says that I can use his upgrade. On September 20, 2013 when the online preorder begins, am I able to preorder a phone for myself with my dads number and use it with my own number? How does it all work?

Most carriers will allow you to swap phones between numbers without a problem. Swapping will not change the contract on the number that the phone was ordered for. Nor will it affect eligibility for future upgrades. Of course the "swap" will normally need to be done with phones on the same carrier and is probably easier to do when on the same account.
I do this every year, or rather every other year. I am the techie, my wife not so much. So when the new iPhone comes out, I get it for which ever number is eligible for upgrade and have it activated to my number and then activitate my old phone to her number. I usually go to the phone company store (AT&T in my case) as they have new sims on hand and usually need to use at least one.

Populating Customized fields in Sales Order Creation using BAPI

Hi All,
I have a requirement that, I need to populate 2 customized fields which are appedned in the VBAK tables through Append structure. I am using BAPI_SALESORDER_CREATEFROMDAT2 FM for creating it.
Could anybody tell me how to send these 2 coustomized field values in this BAPI using EXTERNIN parameter.
Regards
Rajesh
[email protected]

Hi,
To add data to custom fields there are two appraoches.
1)Using the EXTENSIONIN in the Tables option in the FM BAPI_SALESORDER_CREATEFROMDAT2
Check the Documentation for the same,
Customer Enhancement for VBAK, VBAP, VBEP
Description
You can use this parameter to transfer user-specific enhancments to a BAPI. The customer has to complete the EXTENSION structure and the system automatically continues processing it. If you have not defined any user-specific fields, then you can transfer a blank EXTENSIONIN structure.
Technical information about Customer Enhancements
The following description uses an example to explain how to proceed with customer enhancements to the SD tables VBAK, VBKD, VBAP and VBEP.
The customer has added their own fields to table VBAP using the INCLUDE structure CUTEST. This structure contains 2 fields:
CFIELD1, CHAR 10
CFIELD2, CHAR 3.
The customer also requires that these two fields can be maintained with the BAPI.
1. Maintain structure CUTEST in table VBAP
2. Because the BAPIs work with checkboxes, you must also define a CUTESTX checkbox for the customer structure. It should be structured like this:
Field name Data element
CFIELD1 CHAR1
CFIELD2 CHAR1
3. Define these customer structures in the structures VBAPKOZ und VBAPKOZX using INCLUDE or APPEND.
4. Add the customer structures to the BAPE_VBAP and BAPE_VBAPX BAPI structures using the APPEND technique.
5. Adjust the following structures for customer enhancements to table VBAK:
a) VBAKKOZ
b) VBAKKOZX
c) BAPE_VBAK
d) BAPE_VBAKX
6. Adjust the following structures for customer enhancements to table VBEK:
a) VBEPKOZ
b) VBEPKOZX
c) BAPE_VBEP
d) BAPE_VBEPX
7. Generally, the data should be added to the BAPI interface in the internal communication structures (VBAKKOM, and so on). There, you can process the data in the SD tables (VBAK, and so on).
8. If the EXTENSIONIN parameter contains customer data, you must complete at least the key fields in the relevant standard parameters.
For example:
You want to change customer field VBAP-CFIELD2 for item 20 to "XYZ" in order 4711.
The following entries are expected:
Import: BAPIVBELN-VBELN = '0000004711' Document number
 BAPISDHD1X-UPDATEFLAG = 'U' UPDKZ for doc header
Tables: BAPISDITM-ITM_NUMBER = '000020' Item number
 BAPISDITMX-ITM_NUMBER = '000020' Item number
 + BAPISDITMX-UPDATEFLAG = 'U' UPDKZ for item
You must complete the EXTENSION table as follows:
STRUCTURE VALUEPART1 1234561234567890123
BAPE_VBAP 0000004711000020 XYZ
BAPE_VBAPX 0000004711000020 X
Further Information
You can find more information in the BAPI programming guide in the chapter for enhancements to BAPIs.
Notes
You must complete the STRUCTURE field with the name of the relevant enhancement structure (BAPE_VBAK, BAPE_VBAP, BAPE_VBEP). You can complete the remaining fields with the append structures from the enhancement structures.
At the moment, you can use the BAPI to store enhancements in the following structures:
VBAK : An enhancement to header data requires an append structure to BAPE_VBAK and an enhancement to structure VBAKKOZ.
VBAP : An enhancement to item data requires an append structure to BAPE_VBAP and an enhancment to structure VBAPKOZ.
VBEP : An enhancement to schedule line data requires an append structure to BAPE_VBEP and an enhancement to structure VBEPKOZ.
VBKD : If you are using an enhancement for header data, you must add an append structure to BAPE_VBAK. You also need to enhance structure VBAKKOZ. If it is for item data, you need to add an append structure to BAPE_VBAP. You must also enhance structure VBAPKOZ.
If you also want to work with checkboxes, each X-structure must also contain an append structure.
For example:
A customer has created an order and wants to include the material long text (50 digits long).
The EXTENSIONIN structure must be completed with BAPE_VBAP. Two fields have fixed definitions in this structure. These are in the VBAP host key (VBELN, POSNR). The customer sets up an append structure that contains field ZMAT50.
Because the VBELN is normally blank when you create an order, the data can look like this:
STRUCTURE |BAPE_VBAP
2) Create the Sales Document using the FM and when successfully craeted you will get the Sales Document No in the Export parameter SALESDOCUMENT.
After its created and Committed using BAPI_TRANSACTION_COMMIT , do a BDC recording for the same to (VA02 Change Sales Order) update the fields only and save the document.
Regards,
AS

To load customer master using bapi

HI GUYS ,
DOES ANYONE HAVE A SAMPLE CODE TO LOAD THE CUSTOER MASTER DATA USING BAPIS.

Hi Nishanth,
TO LOAD THE CUSTOER MASTER DATA USING BAPIS.
In case you wish to read the customer data you can use the following BAPI, it retrieves the Customer Master (Company Code) Data and the General Data in Customer Master.
CUSTOMER_READ
You need to pass the Customer Number and the Company Code. See the example given below.
REPORT ZEX_CUSTOMERREAD .
Parameters: p_bukrs like KNB1-BUKRS,
 p_kunnr like KNA1-KUNNR.
Data: ty_kna1 type kna1,
 ty_knb1 type knb1.
Data: int_kna1 like ty_kna1,
 int_knb1 like ty_knb1.
CALL FUNCTION 'CUSTOMER_READ'
EXPORTING
 I_BUKRS = p_bukrs
 I_KUNNR = p_kunnr
IMPORTING
 E_KNA1 = int_Kna1
 E_KNB1 = int_knb1
EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
thanks
karthik

Customer creation using BAPI with given customer number

Similar Messages

Maybe you are looking for