Customer Enhancement in Project Network Activity

Hi Gurus,
I add a new subscreen in project network activity(cj20n). I use the structure CI_AFVU as field structure.
It contains two fields 1) CI_AFVU-ZZSALES_DOC
2) CI_AFVU-ZZSALES_ITEM.
The exit is CNEX0008 in which I have two function exit for PBO and PAI for that subscreen.
EXIT_SAPLCONW_002 for PBO
and EXIT_SAPLCONW_003 for PAI.
My problem is in PAI I am not able to import data from screen. I use the following code:
CNCI_AFVU_EXP-zzSALES_DOC = CI_AFVU-zzsales_doc.
CNCI_AFVU_EXP-zzSALES_ITEM = CI_AFVU-zzsales_item.
and one more thing is that Different Activity takes the same Value in both the customer fields which should be different. Although in debugging mode CI_AFVU display the values, but when I am trying the above code it give me a compile time error 'Field "CI_AFVU-ZZSALES_DOC" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement . . . . . . . . . .'
I need a solution for that, Pls help.
Thanks,

no comments

Similar Messages

Unit of measure missing for LagDuration in ES for Project Network Activity?

Hello,
I just tried the Enterprise Service "Read Project Activity" (ProjectProcessingManageProjectIn) from ESM ERP 604 in the ES workplace. The field LagDuration in the NetworkRelationship consists of only a number, but no unit of measure. I changed the unit from Hours to Seconds via the Web Portal and watched the results of the Service: the number did not change although one hour should result in different lag time than one second. IMHO the unit of measure is missing in the service definition. Or am I getting something wrong?
Regards,
Uwe.

It is even worse: There are several duration fields in the "Manage Project In" Service Interface (e.g. Activity BaseDuration). In the responses these fields always contain a naked number (no unit of measure). In the WSDL these fields are of type "Duration" which has a pattern restriction of "PnYnMnDTnHnMnS" - not an int type! In a request if you pass e.g. "PT20M" (which is a valid Duration according to the samples) you will get a nasty parse error. Can anybody explain? Has anybody worked around this issue?

Project related tables and link for services in Network Activity

Dear Experts,
    My requirement is I need a table for services in Network activity before release of Network and link for services to another table(Project related before PR).
Ex : Network             Activity           Service
        XXX                     XX                   12345
      So I need Service field, which is updating in ESLL was unable to link with another table to get the Project Number. So please help me .
Regards,
Srikanth.

Dear sushrut sheth,
thank for the reply
I looked in AFVC before to post the Issue but in this table the Activity is only updating but not the individual service items
I required the table which is updating the individual service line items

Release strategy for PR generated through network activity (Project)

*Hi,
I am facing the problem that PR generated through network activity (Project) does not have release strategy attached. For same combination of characteristics value of PR document type , account assignment, release strategy strategy is attached for PR created manuelly.
Please suggest
Regards.*

What is the account assignment used in Network generated PR, Have included that in your characteristics? Is PR in Your defined document type?

Function, BAPI to get the children form a Network Activity in a Project (PS)

Hi everyone,
I have a Project in TCode CJ20N with PEPs, Networks and all the components that It has.
I'm doing a program which input "Network Activity" and the result have to be all the children for this Network Activity (Material Components) including the information for each Material Component because What I'm looking for is to check if at list one of the children for a Network Aciviti have a Purchase Requisition linked to it as I show in the Attached File.
To do this, I need to execute a function, BAPI, BADI or any code to get the children to look for a PR.
Thanks a Lot.
Regards
Felipe Uribe

Hi Arun...
thanks a lot, I think it could work fine!!!.
I'll try using this BAPI.
Regards
Felipe Uribe

R3P- Project builder Network activity processing time

Hi Gurus,
I have created a Network activity (internal)for our equipment to be dispatched at CM21.
I have input 250.0Hrs and the NWA scheduling date as follows:
Cannot start before: 07/28/2010
Finish not later: 08/31/2010
the NWA work center has the operating time of 8.00H and execution formula of SAP008 Proj:RqmtsNetwkMaint
but upon checking at the NWA 'date' tab the earlier tart date was 07/29/2010 and earlier finish date was 08/08/2010 and the duration was computed 1.5WK it still computes for 24Hrs whereas it should compute 8hrs only.
Please advise what should i change or which should i set up?
thanks.
God bless
-cheann

Hi,
Please create New network under L3 WBS element then you have to create Activity that time system give different activity number
as per above mentioned screen shots showing - same activity numbers why because - while creating activity system has considered same Network number to L3 wbs element
please create new Network under L3 WBS Element
then your issue will be clear
Thanking you
Mahesh

Project system network activity cost distribute

it is possible that i distribute the plan cost of external network activity to period wise. if yes then how ..........
thanks

Hi
You can't plan the cost of external network activity period wise. The lowest level you can plan period wise is WBS Element level.
Regards,
Suraj

Custom Enhancement

Hi All,
I have a custom enhancement implementation.Though the Enhancement is active the code associated with the enhancement is not getting executed.
Should the the Enhancement implementation necessarily be assigned to a switch for it to get executed.Please clarify.
Regards,
Roopa
Edited by: Roopa R on Jun 18, 2008 1:36 PM

Hi Roopa,
All the standard SAP Enhancements are seen in SMOD. Here we will be viewing all the components for the particular packages.
After picking up the correct one that suits to our requirement we will go to CMOD, and create a ZXXX customer project there. After that you will be importing the particular exit and click on the components tab respectively.
For knowing that whether your enhancement is active or not you will be clicking on the function module exits and insert a break point over there. Inside the function module exits there will be includes. In that includes you will writing your code.
For Ex: EXIT_SAPMM06E_006 in that include write break username , by this that particular exit gets triggered for your ID only. Similarly you will be ruuning your transaction by giving some input details, so by this you will be checking for the exits.
In the same way for BADI's also to find a exact BADI you will be creating an implementation on the interface tab there you will be finding number of methods. Inside the methods you will putting a break point and activate them.
Then you will run your transaction.
Cheers,
Swamy Kunche

Settlement rule for Network activity

hi,
in my project, settlement rule of network activity is automatic to the superior WBS.. however i noticed that the default settlement rule is FUL.. is it possible to make setting such that the default settlement rule would still be to the superior WBS but it is PER (periodic settlement insted of full)
how to do this?
thanks in advance.

see OSS note 317871
Summary
Symptom
When you create a network or a new network activity, the respective settlement rules can be generated automatically by default. In the standard system, default rule PS1 is currently supported for this. This default rule creates a settlement rule for the full settlement.
A default rule for the generation of a settlement rule for periodic settlement does currently not exist.
Additional key words
CN21, settlement rule
Cause and prerequisites
At present, the function is not supported in the standard system.
Solution
The attached program creates a corresponding new default rule PS2 which generates a periodic rule. In Customizing, you can assign this default rule to the affected network types afterwards.
It is planned to include this default rule in a future release in the standard system.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 18.06.2007 07:57:36
Priority: Recommendations/additional info
Category: Advance development
Primary Component: PS-COS-PER Automatic and Periodic Allocations
Secondary Components: PS-COS-PER-SE Settlement
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 40 40B 40B
SAP_APPL 45 45B 45B
SAP_APPL 46 46B 46B
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470 X
SAP_APPL 500 500 500
SAP_APPL 600 600 600

Re: Internal Orders after REL for Network Activity

Dear all,
Purchase Requisition (PR) will be automatically created after the Network Activity is Released (REL). However, for the PR created, Internal Order (IO) number would need to be maintained for reporting of the expenses in the FICO.
Hence, is the a method where we can maintain an Internal Order number in the PR automatically created through PS module? Or is enhancement development required to prompt a field for user to enter the IO number at the time the Network Activity is released?
Please advise.
Thanks.

you can create another customer field on the activity using an exit
go to txn SMOD
enter CN* and click on the match code button
you should get the CNEX0xxx number for fields on network activity
note - the PR created will have an account assignment of the network activty number
When creating PO you will need to ensure that the assignment is changed to internal order
I still do not beleieve this is a correct way - obviously your client have got it wrong and need to change
Lastly what is the benefit of having the Internal order number in the network activity as it will not automatically in the PO!!

How to remove a network activity for one employee from the worklist?

Hi,
We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
Regards,
Petter

Well for this pernr you need to have a special coding to check for network and pernr.
other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

SD PS Integration: How to copy material text in Project Network?

Hi
We are creating project from contract where every material from contract creates a Network/ activity in project. The requirement is to pull material text in Network. Does it require user exit because I was unable to find any thing in configuration? If this is correct then how can I apply user exit here?
Regards
V

this is not standard SAP and hence exit needs to be looked at or some development or exit on substitution to replace the text from material
Edited by: Virendra Pal on Dec 21, 2008 10:53 PM

How to upload and download Long text for WBS, Project, Network

Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.

One thread in the correct forum is good enough, no need to double post across ABAP forums. Thanks.
Regards,
Rich Heilman

Java - Constant Network Activity - Eating up Internet Bandwidth!

Hi,
The Process "java"is constantly sending data (100-140 KB/sec) and receiving Data (2-4 KB/sec) 24x7.
I have terminated all "cloud" applications (iCloud, Google Drive, Dropbox and CrashPlan etc.). The total
Data sent is about 150 MB in less than 15 mins after a complete reboot eating up my internet bandwidth.
Upgraded to 10.8.3 and also the March 4th Apple update for Java 6.
Called AppleCare and they acknowledged the issue, but sent me off to a Java customer support line
who then turned me down (as I was not a licensed/commercial user of Java). Applecare was useless.
Anyone else having the same issue? How can I completely uninstall Java? Any help or insight is appreciated.
BR,
Raj

Bingo! That was it. Many thanks for connecting CrashPlan and Java. I thought exiting the CrashPlan application would turn this backup service off. But as you suggested CrashPlan runs a Java Daemon/Engine in the background even after exiting the CrashPlan application.
The below command effectively shutsdown the CrashPlan's Java background Engine and the network activity ceased immediately.
sudo launchctl unload /Library/LaunchDaemons/com.crashplan.engine.plist
(From CrashPlan's support site: http://support.crashplan.com/doku.php/recipe/stop_and_start_engine )
Many thanks Linc Davis.

Substitution for Sap ps on Network Activity

Dear All ,
i want to create substitution in project system .My requirement is to create substitution in network activity .Here i have to write ,if proj- PSPID is k* ,then AFVGD-SAKTO will be 43000000. But when i am going to create ,then i am not getting PROJ structure or PSPID field there . please help me for that to create in t code OPSN .
Thanks & Regards
Sambit

Hi,
It would have created wonder if all your K Series projects must be having a separate and specific project profile. In that case, you just need to assign the network profile by defaulting cost element into it.
Anyways, can you try to pick up one common field in AFVGD except project definition. I am just thinking for other way round solution.
I hope, SHD0 (Screen and Transaction Variant) will also not work in this case because in your case project series is fixed.
Lets wait for other experts to comment on this.
Regards,
Amit

Customer Enhancement in Project Network Activity

Similar Messages

Maybe you are looking for