Customer-Fields for accounting

Hello,
i have a question about adding customer-fields to accounting. According to SAP-Note Note 458591, its easily possible to create additional fields by only create them in append-structures. For me it sounds like you only have to do this and additionally add the new fields to the table BBP_C_ACC_F etc to see the new fields input-ready within the accounting-tab of Purchase Order maintenance etc, like me21n.
Sadly the note is only for SAP SRM. Could anybody tell me if thats also possible for SAP ECC 6.0 ? The problem is, that ECC doesnt seem to have a table like BBP_C_ACC_F mentioned in the note.
Or is the only way to add maintenance of further fields in accounting over new tabs with Badi ?
any help would be appretiated.
thanks and regards,
oliver

No one ?
Maybe i wasnt able to write down my point, so here i go again.
Theres the standard "Accounting"-Tab within the item-level details of PO-transactions like ME21N. That tab holds informations about the using accounts of the selected order-position (EKPO). Now i need to add one new customer-field to this tab. For this i extended the structure CI_COBL which is included in the structure COBL. That one holds the data for this tab. The structure is extended now - but how do i get this new field onto the displayed Subscreen on that accounting-tab ?
Thats my point. I already tried to do it over generate a new subscreen over SPRO->IMG->MM->Purchase->Accounting->Create Subscreen for Accountingblock and adding the field of COBL by hand but its still invisible on the screen even the subscreen is used. The logic must make it invisible.
Can anyone help me out and give me some hints on that ?
Thanks alot and regards,
oliver

Similar Messages

Replicating Custom Fields for Products in CRM from ECC

Hi All,
I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
    this new settype to MAT_HAWA. (As all our materials fall under this material type).
2. I am looking to map SAP standard field from ECC to this custom field of mine.
    I wrote the code in CRM BADI
    'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
DATA: ls_category_bdoc       TYPE COMT_PROD_CAT_REL_MAINTAIN,
      ls_category            TYPE COMT_PROD_CAT_REL,
      lt_categories          TYPE COMT_PROD_CAT_REL_TAB,
      ls_settype             TYPE COMT_settype_ext,
      ls_cat_settype_rel     TYPE COMT_CAT_FRAG_REL,
      lt_cat_settype_rel     TYPE COMT_CAT_FRAG_REL_TAB,
      lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
      CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
        EXPORTING
          IV_SETTYPE_GUID         = ls_cat_settype_rel-frgtype_guid
        IMPORTING
          ES_SETTYPE              = ls_settype
       EXCEPTIONS
         NOT_FOUND               = 1
         NO_IMPORT_VALUES        = 2
         NO_TEXT_FOUND           = 3 .
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
CASE ls_settype-frgtype_id.
      WHEN 'ZMASTER_INFO'.
      ls_ZMASTER_INFO-relation-owner = 'X'.
      ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
      ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
      ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
      APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
      APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
   ENDCASE.
ENDLOOP.
Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
Could anyone please suggest if i am missing anything here? Any help is appreciated.
Thanks,
Karuna.

Hi Karuna,
One more solution is to change the BDoc data content before it hit the Database.
this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Custom field in Account Partners Edit page

Need to display a new custom field in Account Partners Edit page. We are not able to find the object definition of "Account Partners" which we can edit. Is option of adding a custom field in Account Partners Edit available in CRMOD? Will enabling "Partner Relationship Management" help in this regard?

At this time it is not possible to add a custom field in the Account Partners Edit. I would recommend submitting a enhancement request to CRM On Demand customer care.

User's custom field for metadata entrance

It would be wonderful if the user could add a series of metadata custom fields.
I'm thinking in a situation where you might be photographing for a national museum or an art gallery where you could enter a custom field for the artist's name, date of birth & death, nationality, restoration details (who did what & when?), etc..

I second that one, too. It would be immensely useful. After all, LR is a database, so adding custom fields shouldn't be too difficult, should it?
I'd be happy for these to be internal only, not exportable.
David.

How to Register a Custom Template for Accounts Payable

How do I register a Custom Template for Accounts Payable?

Found this thread on the forum: Registering Template in Oracle Applications
Take a look to see if the thread helps..

Adding customized fields for Travel Expenses

Hi,
I would like to add some customized fields for user input during the creation of travel expense form. Is this possible? If yes, any advise on the steps to create customized fields for data entry of travel expense form?
Thanks.

Hi Yvonne ,
Thank you for the tip , it was helpfull.
We are using field BUS_REASON "Business Partners", We changed label for data element but is not showed in TRIP transaction we can see it in PR05 transaction.
How can I change labels for TRIP transacction?
We did the change in CMOD transaction
Thanks.

T030 - custom key for account determination

Dear expert,
according to your opinion would it be possibile to create a custom key for account determination.
(f.i. ZGBB as a copy of GBB).
Thank you in advance.
Fuffo.

Hi
You can create new transaction keys for conditions (like delivery costs etc) but regular transaction keys like GBB - I think not possible.
Thanks
Edited by: Praveen Raghavendra on Apr 3, 2009 7:26 AM

Add a custom field for Product Allocation

Hi experts,
I have copied S140 to S501 to add a custom field for product allocation.
I have added the custom field in MCVBAKUSR, so it is visible in MCVBAK.
However, I don't know whether I can populate data into custom field. I searched in forum, someone said it can be done in SAP enhancement MCS10001. But it can't work. I have tried to place a break-point in the code, and seems that throughout the order creation and product allocation check, it hasn't get into the codings in enhancement MCS10001.
Can anyone give me some idea on it? Thanks.

You should have simply extended VBAK table. It would've taken care of extending MCVBAK, etc. Then VBAK field would have to be populated in a user exit USEREXIT_CHECK_VBAK in MV45AFZB, when a document is being created/changed.

Enabling Quote custom field for External Pricing Response

Hi All,
Using UI configuration (adaptation) we are able to define new fields and enable them for standard web services. The result is that they are included in the relevant WSDLs and can be mapped using PI/HCI to equivalent fields in an external system such as SAP ECC.
Looking at Quote's for example, we have defined a new field at Product Item Line level and have the following services we can enable it for.
Enabling for the CustomerQuoteRequestExternalSalesDocumentDataOut outbound service adds the field to the External Pricing request part of the resulting WSDL, however it is not enabled for the response which is key to our requirement.
Is it possible through PDI to enable this field for the inbound equivalent for CustomerQuoteRequestExternalSalesDocumentDataOut??? If not, is it possible to create the field through PDI and enable it that way?
Thanks
Indi

Hi Chandan,
Thanks for the response.
The External Pricing interface for Quotes is synchronous so has no IDoc as such. We send some parameters to fetch a price from SAP ECC, and the response contains all the pricing information.
In terms of the response, we're able to pass the value we need from SAP ECC to HCI, however there is no place in the WSDL for us to pass it to the field we have defined in C4C.
The WSDL for External Pricing contains both the request and response structures, therefore two root nodes. Adaptation only allows us to enable the field for the request (outbound) node. I'm trying to work out how we can enable our custom field for the response (inbound) node within the WSDL structure.
Thanks
Indi

How Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD

Hi friends,
How can I Update Custom fields for EABL DB table by using BAPI_MTRREADDOC_UPLOAD
for the parameter EXTENSIONIN of type BAPIPAREX
I am passing the Structure as BAPI_TE_EABL
in that structure MRIDNUMBER as EABL-ABLBELNR field value
ZMESSAGE some text of 30 char and
ZSKIPC of 2 char
but I am not able to update that data for the MRIDNUMBER (ABLBELNR ) in DB table EABL
I am getting RETURN Structure message type E
as
"Upload interim entries: Maintain one table only"
Can any one provide me solution
Thanks in Advance
Ganesh

Hi,
Refer the following SAP notes.
1. Note 485557 - BAPI_REQUISITION_CREATE: 'EXTENSIONIN' customer enhancements
2. Note 584902 - BAPI_REQUISITION_CHANGE: ExtensionIn not connected
3. Note 792132 - EBAN, EBKN: user-defined fields are not filled
Regards,
Harish

Custom Field in Account Assignment with search help functionality..

Hello friends,
I have added a custom field(Profit Center) in account assignment frame which is having search help also attached..
the data for search help read from R/3.. When i click the search help in WEB , I got an error message saying that 'No input help available ( Search help PRCTR_EMPTY is empty )
Any one have found this kind if issue?
please help out
Regards,
john.

Hi
You can create a custom search help (simialar to R/3 srch help for profit center) and create a corresponding search help exit for this purpose.
You need to call the R/3 table from SRM to get the required data and then map the data in to the search help fields.
Hope this will solve ur problem.
Regards
- Atul

ISE 1.3 Guest API - using custom fields for guest creation?

I am currently working with the new ISE 1.3 guest api, i have most everything working, i can create guests fine, with the basic information entered into the guest account like first name, last name, company, email, phone and so on. Now i need some more fields to enter other information in for that guest, and i have created 5 extra custom fields called option1-option5, and enabled them for the "Known Guests" page on my sponsor portal. I can however not figure out how they should be adressed in the xml input sent in the api request...anyone tried this ?
Regards
Jan

Hi Johan,
Sure i can lead on the way, the stuff i am doing is part of a complete system i build and sell, that integrates with ISE to give customers the ability to create guest accounts using a number of different social media facebook, google and so on, to self-provision accounts for guest acces (and many other things :-)
I mainly use PHP for this, and for simplicity you can use a curl command line executed by any scripting you prefer, or use any curl library you might have available to you.
So, you need an ise sponsor account that has the "api usage flag" allowed in the sponsor group it is a member of. Then you need to know a few things about the ise setup, that needs to be sent with your request to ise, to allow the creation of a guest account.
If you need some code examples, send me a pm and we can figure something out
API Reference :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/api_ref_guide/api_ref_book/ise_api_ref_guest.html

Passing customized field of accounting in BAPI_INCOMINGINVOICE_PARK

Hi All,
I am using BAPI BAPI_INCOMINGINVOICE_PARK to park the invoice, we have added some custom field in FI,
For example we have added field line of product in the FI.
When i park the invoice i need to pass accounting data into BAPI, i could able to pass cost centre , profile centre ,controlling area other than field Line of PRoduct becuase this field is a customized one.
Since i am not able to pass line of producti, when invocie get post and generate accounting document , line of product pass blank value into it.
So give me solution of how can i pass the this customized field of accouting in BAPI BAPI_INCOMINGINVOICE_PARK
Thanks,
D.prabhu

The BAPI_INCOMINGINVOICE_PARK appears to be a non-extensible BAPI, that means EXTENSIONIN parameter required for BAPI extension is not provided for, so you cannot pass or retrieve data for custom fields using this BAPI.
Find some other BAPI related to INVOICE where EXTENSIONIN parameter is available in Importing or Tables.
Cheers!!!

Appending customer field for BAPI_CONTRACT_CREATE

Hello.
I'm trying to append customer field to the table EKPO using BAPI called "BAPI_CONTRACT_CREATE ".
I have created a structure and included it into append structure of EKPO.
Can anyone tell me what I should do next?
Regards,
Tomoko Sakamoto

Hello Tomoko
The BAPI has a TABLES parameter EXTENSIONIN having the following documentation:
FU BAPI_CONTRACT_CREATE          EXTENSIONIN
Short Text
     ExtensionIn
Description
     With the parameters ExtensionIn and ExtensionOut, it is possible to
     enhance the interface of a BAPI without modification to achieve the
     automatic processing of customer-specific data.
     The data is passed on in a table. The format of the individual data
     records of this table is determined via the structure BAPIPAREX. This
     structure contains several data record fields (VALUEPART1, VALUEPART2
     etc.) and a field for the name of an auxiliary structure (STRUCTURE).
     Because per data record the data is written piecewise consecutively to
     the data record fields available for the purpose, an auxiliary structure
     is needed for the interpretation of the data.
     In the event that an SAP database table is to be enhanced by additional
     fields, BAPI table extensions are especially suitable as auxiliary
     structures. A BAPI table extension can either be already predefined by
     SAP or created by the customer. Examples of auxiliary structures and
     BAPI table extensions can be found at the following points:
     o   Description of the various customer enhancement options
     o   Enhancement of BAPI based on existing SAP database tables
     o   Enhancement of BAPI through incorporation of additional customers'
         own database tables
     o   Enhancement of BAPI by import data that does not show up the
         database level
     Note that only fields of the data type CHAR and similar data types may
     be used in the BAPI parameter ExtensionIn/ExtensionOut.
     If the customer Include contains deviating parameters, the configurable
     message ME 887 is invoked. However, the data is not adopted in the
     target structure from the container.
Default
     The auxiliary structures have been defined as follows:
     o   Header data:
         -   BAPI_TE_MEOUTHEADER
         -   BAPI_TE_MEOUTHEADERX
     o   Item data:
         -   BAPI_TE_MEOUTITEM
         -   BAPI_TE_MEOUTITEMX
     o   Account assignment data:
         -   BAPI_TE_MEOUTACCOUNT
         -   BAPI_TE_MEOUTACCOUNTX
Function Module
     BAPI_CONTRACT_CREATE
You need to define and structure the values passed by this EXTENSIONIN parameter in a specific way in order to achieve your goal. For more details please refer to:
[Customer Enhancement and Modification of BAPIs (CA-BFA)|http://help.sap.com/saphelp_nw70/helpdata/EN/6b/3f6d016d0711d396a50004ac96334b/content.htm]
Regards
Uwe

CRM 5.2 - Search on Custom fields in Accounts application

Hi all,
             We are in process of implementing crm 5.2 for the client. We have added a custom field ZZPRIMARY in Accounts application. Though the field is coming in dropdown for search, but search is not working on it. Do we have write some code, or customization, and if yes where to write the code?
   A custom field 'Date' is added in Opportunity and search is working fine in that.
Anyone help from SAP????
Anything specific to be done in Accounts application?
   Any help will be highly appreciated!
Thanks and Regards,
Rohit Khetarpal

Hi,
     We implemented a badi to filter out the already coming results with the new parameter to achieve the desired search result.
Hope it helps.
Thanks.

Customer-Fields for accounting

Similar Messages

Maybe you are looking for