Customer Interaction Center with SAP Phone

Dear All,
We are using SAP Phone with CIC, and everything is working well when the SAP Phone server is started, but soon after one by one some of the extensions stop working. The users when they try to do any operation are blocked as SAP R3 is waiting for SAP Phone server to reply and in the log of the server we see the following
"A call to TAPI function lineGetAgentStatus has failed.
Call handle to use:        (Not used)
Second call handle to use: (Not used)
(Both or one of them may be marked as "Not used"
if not relevant for TAPI call)
> Extended TAPI information:
TAPI returncode:      0x80000049
TAPI error text:      LINEERR_OPERATIONUNAVAIL
2008/10/30 18:44:45:49 Error 0x50016 in Process 1528 Thread 3828
Location: CPHOrderManager::ReturnHandling Module: phordermgr.cpp Line: 1395
The SAPphone Server uses TAPI 2.0 or higher to map
SAPphone functionality to TAPI. Unfortunaltely your
TAPI service provider currently being used does not
implement all TAPI functions required by the SAPphone Server.
In particular, this TAPI function is not supported: lineGetAgentStatus
Please contact the vendor of your TAPI service provider
to get a new version where function lineGetAgentStatus
is implemented or choose a different TAPI service provider."
We have checked the TAPI version and it is 2.1.x. Has anyone faced similar problems? and know of any solutions? If we re-start the SAP Phone server again everything works fine for some time. We checked the memory and its 4GB main memory, and system load is also low
Any help on this will be very much appreciated.
Thanks and Best Regards
Anirban

Did you find the solution for this? We are facing the same problem.
Br,
Virginia

Similar Messages

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

Customer Interaction Center CIC and SAP Phone

Dear All,
We are using SAP Phone with CIC, and everything is working well when the SAP Phone server is started, but soon after one by one some of the extensions stop working. The users when they try to do any operation are blocked as SAP R3 is waiting for SAP Phone server to reply and in the log of the server we see the following
"A call to TAPI function lineGetAgentStatus has failed.
Call handle to use:        (Not used)
Second call handle to use: (Not used)
(Both or one of them may be marked as "Not used"
if not relevant for TAPI call)
> Extended TAPI information:
TAPI returncode:      0x80000049
TAPI error text:      LINEERR_OPERATIONUNAVAIL
2008/10/30 18:44:45:49 Error 0x50016 in Process 1528 Thread 3828
Location: CPHOrderManager::ReturnHandling Module: phordermgr.cpp Line: 1395
The SAPphone Server uses TAPI 2.0 or higher to map
SAPphone functionality to TAPI. Unfortunaltely your
TAPI service provider currently being used does not
implement all TAPI functions required by the SAPphone Server.
In particular, this TAPI function is not supported: lineGetAgentStatus
Please contact the vendor of your TAPI service provider
to get a new version where function lineGetAgentStatus
is implemented or choose a different TAPI service provider."
We have checked the TAPI version and it is 2.1.x. Has anyone faced similar problems? and know of any solutions? If we re-start the SAP Phone server again everything works fine for some time. We checked the memory and its 4GB main memory, and system load is also low
Any help on this will be very much appreciated.
Thanks and Best Regards
Anirban

Did you find the solution for this? We are facing the same problem.
Br,
Virginia

Creating Actions - Interaction Center WebClient - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

The SAP CRM Interaction Center combines separate processes
Communication Process via various channels, e.g.
E-Mail (CRM 7.0, EHP1, EHP2, EHP3):
Pull scenarios: using SAP Connect interface
ERMS workflow (CRM 7.0, EHP1, EHP2, EHP3),
Agent inbox workflow (CRM 7.0, EHP1, EHP2, )
Push scenarios:
simple ICI E-Mail,
ERMS push (CRM 7.0, EHP1, EHP2, EHP3) using combination of SAP Connect and ICI mail handling
Telephony
Chat (CRM 7.0, EHP1, EHP2, EHP3)
Fax and Letter (CRM 7.0, EHP1, EHP2, EHP3)
Customer Interaction Process (CRM 7.0, EHP1, EHP2, EHP3)
and the integrated Business Transaction Process
CRM Business Transactions: UIU integrated views (CRM 7.0, EHP1, EHP2, EHP3)
IC specific business transactions (CRM 7.0, EHP1, EHP2, EHP3)
within the context of a single process flow or an agent's "interaction" with a customer.
Blog "Hitchhiker's guide from a process perspective", gives an overview of those processes integrated in the SAP Interaction Center
Only business roles of type B IC Webclient support above mentioned process integration. When setting up your own business role for the Interaction Center, consider KBA 1836437 which summarizes technical prequequisites from customizing point of view.

Customer Interaction Center -- MSA

Dear Colleagues,
The scenarion is:
Sales Representative has created Activity (Meeting) in MSA. By default logged in user will be taken as fuction "Sales Representative" in 'Person responsible' tile. I have added one more employee in this tile as fuction "Person responsible".
So till here, sales rep has created activity in MSA and deligated this to one employee.
Now as a employee, I go to CIC (customer intreaction center) screen and I would like to know what all activities are assigned to me by my sales representative. Is this possible?
I can not see ant option to search my activities.
Please do guide.
Regards
Milind
I am trying to search with g

I'm not sure about the way CIC works.
But you should be able to search this activity using transaction CRMD_BUS2000126 (activity maintenance).
In partner dropdown select particular partner (sales rep or person responsible), select particular employee as search criteria and you should be able to find that activity.
Regards,
Kaushal

Problem in Customer Interaction Center

Hi All,
I have an issue related to CIC win client.
While using the Customer Interaction Centre, enter Partner number and performs a search, the sold to party and bill to party customers brings up the incorrect details.
Where should I need to check relates to his profile, could pls. share your inputs to resolve this issue.
Thanks in advance.
Regards,
Smitha.

Hi
what do you mean by incorrect values?
this search searches for BPs
you mean address data shown in CIC for found BP is incorrect?
remember this is a very basic view, and not so enhanced like in BP transaction.
you wont see here much data.
regards
Radek

Interaction SUP with Sap B1

Hi I have a question I can insert data throw Workflow of SUP to Business one? or I need to build a library with SDK and consume from SUP, Thanks for you help.

I think SAP Business One is an out of the box solution (not an R/3 but R/2 ) with does nt involve Abap ( Bapi's are nt involved) and integration of SUP/SMP with SAP systems(R/3) is possible via BAPI / FM
Also SUP/SMP supports integrating database and develop applications on top of it (m nt sure the possibilities/challenges in business one ).-- This could be an alternative to look into without Business One SDK.

Custom search in the Customer Interaction Center

I have a somewhat unique custom requirement in CIC. The user wants to go to our custom Alta Vista search upon pressing enter when either the name or phone number field is populated. We have a search that is activated only when the CSEARCH_SEARCH button is pressed and the name and phone number fields are not entered, however the new requirement is to capture what was entered in the name or phone number fields when specifically the enter key is pressed and execute the function module behind custom search with these fields pre-populated.
I was look for a BADI with a method that both is executed when enter is pressed and exposes these two fields. As well I would need to bring back the returned customer from the search into CIC. I've played around with implementations of COM_PARTNER_BADI, CRM_IOBJ_CIC_BADI, and CRM_ISM_CIC_LOCATOR with no luck. Is anyone aware of a BADI or some other technique that will fullfill my requirements?
Thanks in advance,
Tony Dagnillo
847 535-4406

Hi Santiago,
I've exactly your same problem... have you solved it?
Thanks in advance
Regards
Lara

Re: Specifics for Interaction Center: Toolbar - Interaction Center WebClient - SAP Library

Hi Sigrid,
i have a problem with the 'Clear Interaction' button,
In the account identification screen i confirm an account and there is a custom view which is used to confirm the appliance,
After this process i am creating a service order through direct link, when i save the order and then do a clear Interaction i get a error message ' clear interaction not possible, order is saved', which is fine.
But when i navigate back to account identification screen i see that the Account information is cleared.
Is this Standard action???
Is there a way to make sure that the Account information is not cleared???
Please help me.
Regards,
Deepak

Hello Sigrid,
I set the system user parameter as WCF_IGNORE_ENHANCEMENT to 'A' so that all the custom enhancement are ignored and i tested it. it was the same issue. I beleive the issue is standard.
So the steps which i took to bypass it was enhancing the component CRMCMP_IC_FRAME,
i enhanced the view CRMCMP_IC_FRAME/HiddenView
i redefined the event handler EH_ONFORWARDCALL
i initially checked whether the order was saved, if the order was saved then i raised the error message
"Clear Interaction not possible, order is saved" and avoided the super call.
This served my purpose, and standard behaviour continued for rest of the cases.
Thanks,
Deepak

Customer Interaction Center documentation?

Does anyone have documentation regarding CIC WinClient. We will connect CRM with telephone system (CISCO) so i will need some kind of materials that cover that topic (connecting telephone system with CIC, creating target group, customer segmentation, etc.).
You can send me all materials to [email protected]
Thank you in advance!

Hi
pl check the folllowing link for CTI
http://help.sap.com/saphelp_crm40/helpdata/en/ff/7f5acbb64711d2b8d6006008ec2322/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0003b5b0-0b01-0010-c0b4-cb3178973441
Do reward points if helpful
Dinaker vikas

How to design and develop Cost center with SAP BPC 5.1 ?

Hi all,
Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
Thanks,
Sandy

Hi Sandeep,
1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
regards
shyam

Integrating custom developed software with SAP B1.

Dear Experts,
We have developed a CRM application by using C#.NET and SQL Server. All the reports are developed by using Crystsl Reports.
This CRM software meets the complete Customer Relation business requirements.
We have installed SAP B1 also in our company, and planning to integrate the CRM software to B1.
Is it possible to open the CRM application within SAP B1, say, if I click a Menu item? If so, how?
Can I share the data between both B1 and CRM? and how it can be done?
Please help.
Thanks in advance.
Regards,
Toms P Abraham

Hi TomsPA,
Is it possible to open the CRM application within SAP B1, say, if I click a Menu item? If so, how?
Yes, it's possible. Just add a menu entry for you application (I suggest under Menu 43535 - Business Partners Module), catch the Menu Event for your menu entry and open your CRM App.
You can find lots of topics about how to add Menus and handle Menu events here in the forum.
Can I share the data between both B1 and CRM? and how it can be done?
Yes you can, but it can sometimes be limited.
You can catch the B1 FormData events and sincronize data with your CRM or you can use the B1 DI Event Service to notify your CRM when new data has been added/removed/updated in B1 and synchronize both apps then.
I recommend you read this article about the method.
Any specific issues, please let us know.
Regards,
Vítor Vieira

Customer Interaction center - Scripting

Hi Folks,
I installed "J2SE Runtime Environment 5.0 Update 1" on my PC and its there on CRM server too. But when I go to scripting system doesnt allow me to create New script. Also Repository on left hand side of screen is not there.
What else nee to be added? Is it correct JAVA version?
Regards,
Nikhil

Hi,
I upgraded my browser from IE6 to IE7. Now repository with all menu is coming but when I selct New and Create Script system gets slow down and doesnt process further.
Do I need to install JRE 1.4.2?
Regards,
Nikhil

Complaint management in Customer Interaction Center (Txn CIC0)

Hello colleagues,
     I am very new to CIC and i want to know how to configure complaints in the application area of transaction CIC0 in ERP system.
     It would also be great if you can provide the data base tables/ transactions which are affected by complaints creation.
    Note: I have found the tables which are hit in the CRM system. They are CRMD_ORDERADM_H and CRMD_ORDERADM_I. If there are other tables that i have missed, kindly let me know.
This is an urgent requirement so a prompt reply would be greatly appreciated.
Thanks and Regards,
Rajat

Hi,
There are tables in CRM which stores, item level information.
They are: CRMD_CUSTOMER_I and CRMD_CUSTOMER_H tables.

Getting Interaction center as the default page on the SAP CRM 7.0 webui

Hi,
I have installed SAP CRM 7.0 and done all the basic things. I have assigned Sales Professional and Marketing Professional PFCG roles to my user in SU01. Now when I logon to webui, I am getting interaction center(with all the accept, reject, etc.. buttons) screen as the default screen and I could not locate my sales or marketing professional business roles.
Can anyone please let me know where it went wrong.
Thanks
SP

Hi Andrei,
No I couldn't see the option to choose the business Roles. I have assigned 4 pfcg roles in SU01 for my user. Also tried with parameter value for CRMC_UIPROFILE=*. But still I could not see the Business roles on the webui page. It is taking me directly to interaction center which is with all the buttons to accept and reject calls.
I have newly installed the system. I believe I have done all the basic things to get into WEBUI. But still couldn't see those assigned business roles on my webui oage.
I have tried this way either. Gone to SE80> BSP Application>CRM_IC-->Execute.......but still it is taking me to interaction center page and not to the assigned business roles.
Please guys let me know where it went wrong.
Thanks
SP

Customer Interaction Center with SAP Phone

Similar Messages

Maybe you are looking for