Customer Invoice cancellation with no tax return to customer.

Hi friends,
Please give your expert advice.
Requirement is-
Need to configure the invoice cancellation against the original invoice and here don't want to give taxes back to the customer. So in the accounting docs of the cancellation invoice, tax value must not be credited to the customer. Please suggest what changes have to be done in pricing.
Regards,
Sandeep

Hi Sandeep
You may have mis-understood the purpose of an invoice cancellation.
In SAP, invoice cancellation is used to reverse the GL postings associated with a billing document (invoice) and also to re-set the status on the underlying delivery or sales order so that it can be re-billed. If there is no requirement to re-bill, invoice cancellation is the wrong process to use.
That being so, you should always credit the tax value to the customer.
You have not explained why you do not want to credit the tax value to the customer.
In order to properly recommend a process it would be helpful if you gave us a bit more detail on the business transaction and requirements.
Are materials being returned?
Do you want to re-bill the transaction? And if so, how will the re-bill differ from the original transaction?
James

Similar Messages

Outbound delivery date in June and customer invoice post in July,tax rate?

Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachin

Tax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav

With holding tax Returns

Dear Sapgurus,
we are using 2 different with holding tax type one is at the time of inv posting and 2nd is payment posting which is earlier, we had created tax types and tax codes we assigned in vendor master assgined to company code and automatic posting also, finally if any vendor pay advance then we calculate tds it will post to tds g/l account, after that in sap any option how to file the tds returns.
Regards
Veeru

Dear,
Once you have posted TDS then usually at the month end you will run below transaction to complete the process..
1. Use transcation J1INCHLN (this will club all TDS posted per section and paid)
2. Use transaction J1INBANK (when you make TDS payment in Bank then bank will give you challan number which you have to update in the system)
3. Use transaction J1INCERT (this will print the vendor certificate (this is usually an year end practice)
4. Use transaction J1INMIS (this will provide consolidated report for TDS)
Regards,
Chintan Joshi

Not able to tag with holding tax code in customer master

Hi
while posting avance payments form customer i need to put tds amount in tds column.
for that iam trying to tag the withholding tax code in customer master.
but the Tax code field is greyed (blocked) and not able to edit.
Pls suggest what will be the wrong.
Regards,
Muniraj

Hi
all the configurations are in order.
But the field tax field is blocked(greayed as uneditable)
this problem is from past 3 days only.
earlier i was able to edit and assign the tax code properly.
i dont know what has gone wrong in between.

Free of charge with internal tax (not to customer)

Hi,
I have a problem with the case of free of charge items.
I have order OR and item category TANN. I need for legal requirements to book the VAT for that item internally and not to the customer.
Can anyone help on that?
Thank you!

Hi,
this can be solved by having a separate static ocndition type on which the tax is to be calculated only in the case of TANN.
The total of the condition type should not fall within the total of pricing as the same will be considered for the Free of charge deduction also.
This does not require any requirement or alt.cond.type but it wil be effective if you have one as your requirement is that the VAT amount should not be posted to customer account.
Regards,
S.Balaji.

Ex-Uverse customer not happy with being a new Fios customer

We just had our Fios Triple installed on Saturday 9/30/13. I was a very happy Uverse customer. We moved to Verizon territory and we wanted something similar so we chose Verizon vs Direct TV and Charter Cable. Verizon Fios is far inferior to my experience with AT&T Uverse. It wasn't just one person but the whole experience. I never called AT&T's customer service in the years we had it. We had no problems. I just got off the phone for the sixth time since our install and it hasn't been a week yet.
Issue 1) Installer called at 8:30am to tell us he needs to come earlier than our 10am-3pm appointment. I explained we were moving and was signing the lease at 9am that is why we set a 10am-3pm appointment so we would have the key, TVs and phone in our place ready for the install. The installer said well he was scheduled for 2 appointments during that time frame so he doesn't know if he could make it at all if he doesn't come now. I told him it was ok to come after 3pm but please call and let us know since we are moving in. I thought about the situation and as a former dispatcher myself, I knew we shouldn't have gotten that call. I called customer service to let them know installer might not be able to show at all and gave them heads up. We got a call back from the installer telling us he will keep the set appointment time. He showed at 1pm
Issue 2) The installer showed with a bad attitude. Our place was already set up for Fios. The previous resident had it installed so it shouldn't have been a hard job. He was complaining he needed to drill a hole to install the Router in the living room. I told him no problem the hole can be covered with the TV and furniture. There was only one wall that the TV could go on so I asked what was the alternative outside of canceling the order. He placed a small hole next to the Verizon box so I wasn't sure what his issue was. It was obvious he didn't want to come to work that day. He took what I thought a long time to set up DVR, Set Top Box,router and phone. I tried hard not to compare AT&T installer to Verizon installer because people have different personalities. This installer wasn't friendly and AT&T went out of his way to tell us what he was doing, gave us feedback and walked us through all three. To put the icing on the cake, he left a nice sheet with our new phone number, att.net email, Uverse URL, wireless network connection name and key and if we had any questions in the next few days, we could call him directly since he was familiar with our set up. The Verizon installer went over the remote and left the channel line up brochure. He told us if you need the wireless network connection info for the devices, the numbers are on the back of the modem. (Do you know how many numbers are on the back of the modem???) I know how to find the numbers but my husband didn't so I had to tell him which ones.
Issue 3) After the install we went back to the old house and got more stuff to move. My husband said he wanted to record Homeland on Showtime can I do it from my phone like I did with Uverse. It took me 1 hour to figure it out because the website wasn't mobile so it wasn't working. I had to download 3 apps to figure out which one to use. I was so proud that I figured it out. It wasn't intuitive and it confirmed I had scheduled the recording. Monday morning I'm in front of the DVR to check my scheduled recordings. Homeland was there but didn't play. Called customer service..They said you have the Extreme HD. You need Ultimate HD. I told them I'm a customer and the names mean nothing to me. I wanted the package that had Showtime but didn't need HBO. When I placed the order originally, I told the sales agent I wanted a similar package to what we had with Uverse. I mentioned we watch Lifetime, Showtime, the Movie Channel and sports but we were going to suck it up that Uverse got Pac 12 channel last week and Fios doesn't have it. I pulled out the channel brochure and saw that there are no movie channels with the Extreme package. I think of 2 errors-1) Give us the channels we want and 2) Why was I able to appear to record from a channel we didn't subscribe to but I was made aware of the 3rd error when the new agent was confirming my order. The price for more channels was cheaper!!! Now I'm not happy at all!!!
Issue 4) I had to look up the phone number on my account. It wasn't in the confirmation email order and of course I had to call customer service once again to get full access to my account online because the call never came through with my full access activation code. I got the code and went to set up my voice mail. I couldn't. I called customer service again and was told I didn't have a voice mail box set up on the server. I asked why. The tech said it wasn't on the order so we didn't now you wanted it. I asked is there an extra charge doesn't it come with Fios voice he said yes then I asked why isn't it just set up. He said how are we suppose to know you want it!!! I've been ordering landlines and cell phones since the 70's. I've never had to tell anyone I want voice mail. All I had to do was set it up.He said well I'll add it and it could take up to 24 hours before you can set it up.
Issue 5) I record Scandal and schedule to record on all types since we have HD in the living room and SD in the bedroom. We decide to watch half in the living room and the other half in the bedroom. You know the problem there.. CAN'T. I'm still frustrated with Verizon but haven't reached the boiling point until...I can't record on Monday night The Voice and Dancing With the Stars at the same time at 8pm and Hostages and Black List at 10pm. I see 8pm shows recording as the same time as the 10pm because the networks end the shows at 10:01pm. I said well lets see if in the future one of the shows are on Video On Demand. Click on VOD and it says Temporarily Unavailable. SERIOUSLY!!!! I call customer service. I get a tech. He transfers me to a sales agent to make sure I have VOD in my package. She gets an ear full of my problems and gives me a $20 discount per month for 12 months. I didn't boil over..Still frustrated but appreciated that finally someone tried to make me happy. She transfers me to tech to fix DVR issues and VOD. Tech can't fix SD/HD or recording my 4 Monday night shows. The DVR has limitations that I didn't have with Uverse. VERIZON -time to get up to speed and fast with your DVR limitations. It can be solved with allowing more recordings at the same time...DUH!! You guessed it..Video on Demand was never set up for our account. It will take up to 24 hours to add this service that even comes with the basic Fios!!! I asked the tech how does this happen! When an order is placed isn't there a check list to make sure all the features are activated. He said yes but the agent didn't order VOD. Now to me that makes no sense for the agent to have to order set up for something that comes with a package. It should be a part of the check list.
Verizon..All I can say is, you guys have got to get this together. There needs to be a customer complaint hotline because I now get to tell everyone on this forum and all my social media accounts how poor your set up for new customers and how your DVR service is lacking. I asked during each call if there was a general customer relations department for Fios one agent said yes and gave me the number to Verizon Wireless customer relations...oops!! I happen to be a wireless customer and they got an ear full and apologized for your incompetence. They didn't have a number and got off the phone embarrassed that they shared the same name.

Hi Lisacpt,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Customer Invoice with item numbers without OM installed.

Hi
We would like to know if we want to import customer invoices with items and there is no Order Management module.
How items would be validated. Can this be done through item validation org and if yes, what setups are required and in which module.
Regards,
Ish
Edited by: user12190893 on Jan 16, 2012 3:22 PM

Hi,
I want to create Customer Invoice (DR) with the BAPI BAPI_ACC_DOCUMENT_POST. Can you tell me if you realize this project?
Best regards

Postings with Alternative Reconciliation Accounts with Customer Invoice

Hi Experts,
In customizing i have defined Alternative reconcillation account for a Reco Account of customer.
When i post 2 line items in customer invoice,it is picking recon account from customer master for 1st line item and alternative recon account for 2nd line item .
But it should pick Alternative Reco Account for both line items.
Kindly guide me which setting should be checked for this ?
Regards
Amit

Hi,
You defined alternative reconciliation account for customer but you still have some customizing points to check in addition for that.
Please check OV64 ( IMG -> Sales and Distribution -> Basic Function -> Account Assignment/Costing -> Reconciliation Account determination -> Assign GL Accounts )
And additionnally: IMG -> Sales and Distribution -> Basic Function -> Account Assignment/Costing -> Reconciliation Account determination -> Define Access Sequence
In OBXY transaction, you define alternative rec. accounts per special G/L indicatoris, for example in the case of A/R doubtful / bad debt , system will not pick up rec. account from customer ùmaster record, but the one defined in OBXY. This is for FI part
Hope this can help you
Regards
Tarek
Edited by: Tarek AYACHI on Oct 7, 2011 5:56 PM

Third party returns from customer to vendor (Urgent)

Hi,
We have an urgent requirement regarding an issue with third party returns from customer.
The scenario required is as follows :
When the customer returns the goods in Third party proccess the goods should be directly returned to the vendor instead of receiving into our plant .
How can we map this bussiness proccess?
Currently the returns are handled as per the standard SAP proccess ie.,
Customer returns the goods> Return order is created>Return delivery created (PGR)>Credit memo created.
In this case we are receiving goods into our plant .

Hi Shrikant
1. If delivery of goods is the only issue then you can ask customer to make invoice with Invoice to your company address and Delivery address as the vendor address. Practically it is possible.
2. Then you can make corresponding entries in SAP and regularise it.
Thnx
Nilesh

How to raise customer invoice in case of third party sale from PS

Dear All,
In case of third party sale from project systems module, PR is raised which is further converted to PO and once the material reaches at client place GRN is done.Based upon the GRN the actual cost is booked to the project.How should I raise the customer invoice against the materials received by the customer?
I went through the Forum and based upon the threads there, I came to know that one option is to create sales order for the same items and do order based billings.But for this I have to enter the same materials items again in the Sales order which is nothing but duplicacy of data.
Is there any alternative to this? Or some other way by which the PO line items be copied to sales order so that I can save time while creating sales order.
Regards,
B P Singh

Hi Virendra,
Business scenario is like this.
I have created project and activities.Have assigned materials as 3rd party sale in NWA. I have released the project.PR are getting followed by PO.On doing the GR the actual costs are getting booked on NWA.
My concern is how to bill the Items(the same material components) which are assigned to activity.
As per your input I need to do Resource Related billing.Thanks for the input.It is no longer required to assign materials in DIP to Carry out RRB.
To carry out RRB do I need to create Sales Order first ? If No then how to do RRB? If Yes I need to create a Sales Order with all the material components which I have assigned at activity level. So I was looking for some alternative so that SO creation becomes less tedious.
Regards,
B P Singh

BAPI_ACC_DOCUMENT_POST - With Holding Tax

Hi All,
I am able to post vendor invoice along with withholding tax using BAPI_ACC_DOCUMENT_POST and document posted successfully.
In the cases if a single document is posted for multiple vendors and customers document is getting posted but withholding tax information is not correct. If the vendor is not liable for tax then it should not open the withholding tax information screen for that vendor but in this case the window is opening.
If the document is posted only for single vendor which is not liable for tax then withholding tax information screen is not opening it is displaying the information only which is correct.
In the case of multiple vendors I am filling ACCOUNTWT table parameter with corresponding vendor line item number and its withholding tax details , if the vendor is not liable for tax then I am not filling any details for that vendor in this table parameter.
So can anyone suggest some solution to post single document for multiple vendors and customers along withholding tax using the above BAPI.
Thanks & Regards,
Prakash

Hi,
Here is the sample code. check if some thing is missing in ur code.
http://helponabap.blogspot.com/2009/03/help-on-bapiaccdocumentpost-and.html
Reddy

Custom invoice MIRO & MIGO

Hello
As per Custom invoice rules, I have post the 1st Custom miro in LC, then I have post the MIGO in FC ref of Custom MIRO.
In EKBZ table filed DMBTR (LC) & WRBTR(FC), the both values are not match as per exc rate i.e
exc. rate (type M) 64.66 INR(1 EUR) & DMBTR value 11,756.16 but WRBTR value 266.16 EUR for condition JCDB (same as JCV1, JEDB, JECV), where as GR/IR value is showing correct in MIGO document.
My query is how to calculate the WRBTR value.
Regards
Avijit
Edited by: Avijit Barman on Oct 10, 2011 1:49 PM

Hello Avijit,
Itis not the error but intended system design. If GR is posted before IR
then the net purchase order price is used for valuation. If the IR
price differs from the net PO price (this is your case as you changed
PO price meantime) then the value posted at GR must be corrected when
IR is posted. That is why the system always propose IR amount based
on current PO price when you enter IR with the reference to PO even
though you made GR at different PO price. In general: during IR for
PO for which GR was already made the quantity is taken from not invoiced
GR and amount is calculated on the base of this quantity and current
PO price.
Please see also standard R/3 Library -> Logistics -> Material Management
-> Material Valuation -> Value Changes in Invoice Verification ->
Invoices for Purchase Orders
I hope this clarifies the system behaviour,
regards
Ray

Third party: trigger customer invoice from MIRO

Hi all,
this is the requierement: after the MIRO of the vendor invoice it's ncessary to trigger automatically the customer invoice (third party flow).
Do you know specific userexit to use? Other solutions?
Let me know for further information.
Thank you in advance,
G

Dear Giorgio
Please clarify me why you want the Customer Invoice along with Vendor Invoice??
Suppose in Third party, you will ask your vendor to supply goods directly to your customer-
But here the issue is when you will raise customer invoice and Vendor invoice?
Suppose let us take one scenario--Customer came and you delivered the goods from your vendor to your customer in this week itself.The agreed terms between you and your customer is 30 days.So normally you need to create Customer invoice after he/she receiving the goods.
Why are you waiting in creating Customer invoice can happen at 89-90th day as per your requirement.
(Suppose the Agreed payment terms between you & Your vendor is 90 days--So normally you will be raising an invoice MIRO at 89th or 90th day to your vendor)
Clarify me on this.
Phanikumar

SNP Optimizer run ends with error: Error when determining Customizing data

Hi All
Can you help please what settings are missing: SNP optimizer run canceled with error "Error when determining Customizing data".
Thanks
Best Regards
Andrey

On integration tab of SNP optimizer profile,
maintain 'regard as customer demand' for both dependent demands and distribution demands for fixed orders.
By default it is 'regard as hard constraint' which should be changed.
bye,
Nitin Thatte

Data Source combine - Customer Invoice and Outbound Delivery Item Details

Hello,
I need create report where getting the outbound delivery item details ( like ship date, quantities, product, identified_stock)
and also need invoice number ( customer invoice number) which is available in the Customer Invoice Header or Detail source.
But try to create combined data source not able to join Customer Invoice and Outbound Delivery Item Details.
Since after adding any one of them as first datasource and try to add another data source from above then it doesn't shows up.
Anybody have idea how to get the invoice information (invoice number) and shipping data.
Thanks,
Viral.

Hi Viral,
you only can comine data sources of the same access context. The customer invoice data sources have access context "company" and the outbound delivery sources have "site" or "sales". So unfortunately, you can`t combine these data sources.
Best regards,
Andreas

Customer Invoice cancellation with no tax return to customer.

Similar Messages

Maybe you are looking for