Customer non service
I called in yesterday to discuss the charging issue with my incredible. The first tech was very concerned and even called HTC to discuss the problem, I spoke directly with the HTC rep and she confirmed that there was a known charging issue with the phone with no resolution at this time. My call was transferred several different times until finally I got disconnected. So I called back and got tech support on the phone and this is where my problems begin. After telling another person about the issue he called me a liar stating there was no such issue and they test the phones and have had no problems, he even stated that the other tech shouldn't have got HTC involved, I told him that everyone I know with this phone has this problem, I gain nothing by fabricating a story, Just read any forum for the incredible and you will see there is a problem, We this man had the nerve to call me a liar again at which point he was hung up on and another call placed to the first supervisor I could get on the phone. Either way if they (Verizon) refuse to admit that there is an issue, well then there is nothing to fix. If they wont admit its broke they can't be held liable.
If you have an issue with charging don't just settle with a bump charge (to aggravating) don't settle for a extended life battery. Call in and report the problem. Make them fix the issue, I will not settle for a bandaid on the problem I want a fix for the issue.
I apologize for what I said. ( and I can no longer edit my response)
The battery issue. I still have the plain Jane battery and can get a days worth of service out of it. About 20 hours of uptime and 3+ hours of awake time. But yes, I do the bump charge to get that.But even without it, as much as I did not want to do a factory reset, battery life was helped tremendously due to having to do it. (For another reason)
I guess they (HTC) feared of the battery over charging would be a problem down the road. Is that an issue??? Yes. But to me it is a non issue. I wake up, start the bump charge and when I am ready to head out the door, the battery is charged.
There are so many things in our lives that don't meet our expectations, whether it be a relationship. cell phone, TV Monitor, our vehicle..... whatever. For me, I have bigger things to be concerned with. If 20 minutes while I do other things in the morning cures my cell phone issue, I am happy.
Similar Messages
-
Warrenty and customer non service
SO I have loved my mv3 and taken very good care of it.
Thursday night Oct 7th the speaker quit working.... little did I know the warrenty expired on Friday. Oct. 8th. I did not have time Friday to go into Verizon so I waited til Saturday morning.... Now my phone is out of warrenty and LG & Verizon could not care less. It is my problem and only option is to buy a new phone.... If I treated my customers this way I would not have any, but I am not as big as Verizon and I still have to offer customer service.kbat wrote:
SO I have loved my mv3 and taken very good care of it.
Thursday night Oct 7th the speaker quit working.... little did I know the warrenty expired on Friday. Oct. 8th. I did not have time Friday to go into Verizon so I waited til Saturday morning.... Now my phone is out of warrenty and LG & Verizon could not care less. It is my problem and only option is to buy a new phone.... If I treated my customers this way I would not have any, but I am not as big as Verizon and I still have to offer customer service.
When you defend yourself in the first line,and then just so happen the night before your warranty runs out something happens..........I am calling your bluff and it is your problem. Not LG or Verizon's issue. -
Total useless customer non-service
Second time today I've had to call in, hold time over two hours and 4 transfers on this call and they "claim" that it is resolved.
I bought a large number of items online, and when ordering I highlighted that it was for a business since they were going to have to deliver a large TV. The person on chat noted that, and said that we inform delivery so it would be delivered during business hours. Needless to save, that didn't happen.
When I saw the delivery window, I called and managed to arrange warehouse pickup. They told me that it would show the delivery date until I picked it up, and then it would change to the correct status. Needless to save, that didn't happen.
I called this morning, to get it corrected, so I could get a receipt. The first person I talked to could not understand that I didn't need to reschedule the delivery, I already had the item. The second person I talked to said that they would change the status, and email the receipt. Needless to save, that didn't happen.
The new receipt still showed the TV as undelivered, so the amount for the receipt is incorrect (still). After talking to someone on a garbled connection, it now looks like they have cancelled the TV completely, but the rep (whose name was garbled) said that when the receipt gets emailed, it will show the correct amount and the cancellation is only for the delivery. What are the odds that it's going to be right.
I have the feeling that Best Buy wants me to have a free TV, since they don't want to put it on the receipt, even though they charged my card for it.
Rather annoying way to spend a day.Hello austin_skater,
You situation is certainly not a normal one! I can see how the time you have invested in this, merely to obtain a receipt, could be very frustrating. However, I am glad that the store was able to get you taken care of in the end. My apologies if any inconvenience was caused due to the initial delivery window issue.
When getting items delivered instead of shipped from an order on BestBuy.com, you should receive call the day before your delivery date to be given a 2-hour window. In the event the given timeframe doesn’t work for you, we can sometimes modify your order to Store or Warehouse Pickup, just as you received. When picking it up at one of our warehouses, you should receive documentation confirming you picked up your item. Additionally, if you were logged into your BestBuy.com account when you placed your order, you should be able to view your previous orders (past 18 months max) and reprint those receipts using the “Account” link and then clicking on “Order Status”. The representatives you spoke with should have been able to provide you with this information.
Thank you for sharing your experience with us. I have documented your information here at the corporate level to be used for improving how we support our customers. If you have any other questions or concerns, please let me know.
Your business is much appreciated,
JD|Social Media Specialist | Best Buy® Corporate
Private Message -
Open letter to Verizon Wireless Management and Customer No-Services
After more than 10 years as a customer of Verizon Wireless, I have recently encountered several situations that have caused me to begin the process of changing my service provider to another company. Verizon has "zero" loyalty or appreciation of its existing customers; they have poor, and in one particular case, rude customer no-service representatives and policies.
I purchased a new smart phone for my college daughter. Of course, activation of this new phone required the purchase of a data plan, even though she doesn't need or intend to use data services. (That's fine; I was aware of this cost even though I believe it to be over-priced). In addition, they also required a $30 fee for signing a new contract. Seriously? Are you kidding me? A fee for the "privilege" of signing a contract with the big, powerful, arrogant Verizon? I don't want a contract in the first place; it is Verizon that wants the contract. They should pay me for signing a contract. I could understand a fee for a new account setup (not really, but it makes a little sense) but a fee for an existing multi-line, long-time customer where the paperwork is nothing more than a mere mouse click of the "I Agree" button?
So, the daughter gets her new phone with 24 months of data (for the low, low price of 25 months.... yea right). We take her old phone, which she has had for several years, and decide to use it on another of the lines in our family plan because it has a qwerty keyboard. Now, I learn that I have to sign up for a data plan to use this old phone on a different line. This phone has been in service for several years with no data plan but now I have to have a data plan to use it? What the **** ??? I only wanted to use the phone for voice calls and a few texts. I have no need for data. This phone, an ENV3, is not well suited for data services anyway. (No, I won't be using this old phone after all.)
Companies such as yours dream up junk fees; this one amounts to $1.25 per month additional revenue. They do this as a way of increasing revenue while advertising a lower price, ie advertise $30.00 per month but actually charge $31.25. I suppose they all pat themselves on the back and start counting all the new-found money. The management is so stupid and arrogant that they do not realize what the long-term impact could be. In this particular case, the end result shall be the net loss of $250.00 per month in revenue. I know that you don't care; that is painfully obvious and clear.
Well Mr. Verizon, you may consider this to be my official letter of resignation. Consider me gone, done, history. I don't need you, your arrogance, or your over-priced services. I currently pay nearly $250/mo to your company for six phone lines, four of which are "very lightly" used for calls and and a few text only. Personally, on my line, I do nothing but make and/or receive an average of two 3-minute calls per week. I put up with a lot of crap making my money; I do not have to tolerate any when spending it. I WILL be taking ALL my business elsewhere. Four of my lines are currently month-to-month with no contract. I will be moving these to another provider in the coming week. The remaining ones will be moved upon expiration of their respective contracts.
CheersVerizon has no obligation to respect your "loyalty." They do, however, have an obligatory fiduciary duty to their investors, hence the "upgrade" fees, "line access" fees, "regulatory recovery" fees, data plan "repuirements", and data caps, none of which are intended to buy YOU anything. They are assessed primarily to provide profits to them and dividends to their investors, along with a source of capital expenditure for their network expansion whose sole purpose is to attract more customers to provide more revenue streams to meet their aforementioned fiduciary duty to serve their executives and investors ever greater profits and dividends. And in this country, that is ALL this wireless game is about. EVERYTHING else, be it customer service, value of service, loyalty or anything else, is secondary.
And you think other carriers are any different? Nope. They all are in this for the exact same game, however they choose to play it, plan for plan, fee for fee. Sure, details differ, some plans might look more appealing and for some, prudent shopping around might even net some nominal cost savings, but all in all, they pretty much charge the same fees and require the same data plans, because that's where the big bucks are, and one way or another you will pay them or you will do without (which might be a blessing in disguise).
I personally don't like this any more than you do, and I would favor strong federal regulatory oversight much as they have in Europe Latin America and Asia, along with homogenized network infrastructure which stimulates competition by allowing easy interoperability of phones and devices irrespective of carrier, but I fear it will be a cold day in hell before we ever see the likes of that here. According Republican thinking, that's just not the "American Way." -
Custom Render service question
This is kind of related to the post at "http://www.adobeforums.com/webx/.3bc480d1/9".
Would like to find out how to use a custom Render service to populate some fields on the form, at the "Initiator" step of a workflow app.
In the Form Augumenter, there's "Get Field Value" service, but there's no "Set Field Value".
There's a "Insert Workflow XFO" service, but it seems that it can only set those "AWS_xxxx" fields.
How do I set a field value (to non AWS_ field) in a custom Render?
(at the "Initiator" step of a workflow application of course)
I know that I can make a WebService call from the Form to populate fields on the form, but it seems neater to do the field population in the custom Render (if it's feasible).
thanks
JamesAnswering James's question about converting types...
Livecycle has a concept of coercion. This is similar to the way javascript and many other interpretive languages work with different types of data. Basically, if you assign a variable of one type to a variable of another type, LiveCycle will do it's best to coerce the variable to the new form.
So, for example, if you assign an int to a long, it will just work. And if you assign an int to a string, you'll get a string containing a representation of the int.
If you assign a Document to an XML variable, if the document actually contained valid XML, then you'll end up with an XML document. If it doesn't contain valid XML, then I think you'll get an exception.
Some coercions just don't work - for example, a list to a doc just doesn't make sense.
Hope this helps...
Howard
http://www.avoka.com -
hi,
does a custom portal service get listed under sys admin ->sys config -> service config -> applications...
I can not seem to find it under that.
Pls help
ThanksThanks Harini
Curious, I did not find my service under,System Admin -- System Config -- Service Config
but did find it under System Administration --> Support --> Portal Runtime --> Application Console
Under the console, it shows the these properties,
Class Name : <mu class name>
Class Name Factory: none
Pool Size: 0
Nb Accessed: 0
Last Accessed Time: <time stamp>
Last Stopped Time: <time stamp>
State: statrted
Is there any thing wrong with the service? the class name facotry does not show anything...
Also is i can not find it under service config
Any help is appreciated.
Thanks
Aakash -
Custom portal service not running ni NW 04
Hello!
We are about to migrate from EP6 SP2 to NW04 and I'm currently testing the results of the first test run.
One special problem I encountered is one of my custom portal services no longer running. It did without flaws back in EP6, so something seems to have changed.
My Service interface:
[code]
package com.rag.ekportal.bginfocenter.kmservice;
@author Juergen Wahlmann
public interface IBGFetcher extends IService {
[/code]
And the implementation:
[code]
package com.rag.ekportal.bginfocenter.kmservice;
public class BGFetcher implements IBGFetcher, Runnable {
[/code]
portalapp.xml
[code]
<?xml version="1.0" encoding="UTF-8"?>
<application>
<application-config>
</application-config>
<components>
<component name="BGViewer">
<component-config>
<property name="ClassName" value="com.rag.ekportal.bginfocenter.bgview.control.BGViewer">
</property>
<property name="SecurityZone" value="sbi-ruhr.de/ekportal/medium_safety/com.rag.ekportal/components/bgviewer">
</property>
<property name="ResourceBundleName" value="bginfocenter">
</property>
<property name="ServicesReference" value="usermanagement,knowledgemanagement,com.rag.ekportal.bginfocenter.kmservice.BGFetcher,com.sap.portal.ivs.connectorservice,landscape">
</property>
</component-config>
<component-profile>
<property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld">
<property name="personalization" value="none">
</property>
</property>
<property name="templatesfolderName" value="Vorlagen">
</property>
<property name="guidelinesfolderName" value="Richtlinien">
</property>
<property name="bgContactsfolderName" value="BG-Ansprechpartner">
</property>
<property name="ksb2folderName" value="KSB 2">
</property>
<property name="bgControllingfolderName" value="BG-Controlling">
</property>
<property name="rvURL" value="/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.fo.admin!2fcom.admin.fo.iview!2fcom.admin.iview.fo.ri!2fcom.admin.iview.ri.fo.rag!2fcom.admin.iview.ri.rag.iv.begis_0_0?numberBG=">
</property>
<property name="KmServiceUser" value="KM Service User">
</property>
<property name="systemAlias" value="BeGIS_RV_DB">
<property name="personalization" value="admin"/>
<property name="plainDescription" value="JDBC System object for DB access"/>
</property>
<property name="table" value="janus_contract_bg_v">
<property name="personalization" value="admin"/>
<property name="plainDescription" value="Database View for reading contracts"/>
</property>
<property name="table1" value="user_roles_v">
<property name="personalization" value="admin"/>
<property name="plainDescription" value="Database Table for checking user role in RV DB"/>
</property>
</component-profile>
</component>
</components>
<services>
<service name="BGFetcher">
<service-config>
<property name="className" value="com.rag.ekportal.bginfocenter.kmservice.BGFetcher">
</property>
<property name="startup" value="true">
</property>
<property name="SecurityZone" value="sbi-ruhr.de/ekportal/medium_safety/com.rag.ekportal/services/bgfetcher">
</property>
</service-config>
<service-profile>
<property name="interval" value="300000">
</property>
<property name="enable" value="false">
<property name="type" value="boolean">
</property>
</property>
<property name="numberofruns" value="1">
</property>
<property name="repository" value="/rag_bgm_test/Beschaffungsgruppen">
</property>
<property name="KmServiceUser" value="KM Service User">
</property>
<property name="dbServer" value="xxx">
</property>
<property name="dbUser" value="xxx">
</property>
<property name="dbPassword" value="xxx">
</property>
<property name="dbName" value="xxx">
</property>
<property name="workfolderName" value="Arbeitsordner">
</property>
<property name="teamfolderName" value="Teamordner">
</property>
<property name="contactfolderName" value="Ansprechpartner">
</property>
<property name="publicfolderName" value="u00D6ffentlicher Ordner">
</property>
<property name="deletedfolderName" value="/rag_bgm_test/Gelu00F6scht/">
</property>
</service-profile>
</service>
</services>
</application>
[/code]
The service didn't work after the migration, so I tried to deploy it again. This is the result:
[code]
Date : 01/12/2006
Time : 13:31:37:880
Message : [PortalServiceItem.startServices] service initialisation failed:com.rag.ekportal.bginfocenter.kmservice|BGFetcher
[EXCEPTION]
java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/ResourceException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__createServiceInstance(PortalServiceItem.java:727)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:613)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1042)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1563)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1518)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.restartQueuedApplication(PortalAppBroker.java:1866)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.updateApplications(PortalAppBroker.java:1702)
at com.sapportals.portal.prt.deployment.DeploymentManager.updateApplications(DeploymentManager.java:1754)
at com.sap.ip.portal.admin.portalanywhere.QueryHandler.handleTopic(QueryHandler.java:152)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.executeActionHandleTopic(NotificationSAPJ2EE630.java:1141)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.notifyActionSubscribers(NotificationSAPJ2EE630.java:1089)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.receiveWait(NotificationSAPJ2EE630.java:386)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.broadcastAndWait(NotificationSAPJ2EE630.java:553)
at com.sapportals.portal.prt.service.notification.NotificationServiceDispatcher.broadcastAndWait(NotificationServiceDispatcher.java:192)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryAndGetResults(EventForwarder.java:122)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryToAllServers(EventForwarder.java:144)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.forwardEventToAllServers(EventForwarder.java:135)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.forwardUpdateToAllServers(ArchiveUploader.java:253)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doContent(ArchiveUploader.java:235)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Severity : Error
Category : /System/Server
Location : com.sap.portal.prt.runtime.broker
Application : sap.com/irj
Thread : SAPEngine_Application_Thread[impl:3]_15
Datasource : 2390950:E:\usr\sap\PMT\JC00\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 000C29A5B62A00400000001300000A4000040A2887A939D9
Source Name : com.sap.portal.prt.runtime.broker
Argument Objs : java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/ResourceException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__createServiceInstance(PortalServiceItem.java:727)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:613)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1042)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1563)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1518)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.restartQueuedApplication(PortalAppBroker.java:1866)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.updateApplications(PortalAppBroker.java:1702)
at com.sapportals.portal.prt.deployment.DeploymentManager.updateApplications(DeploymentManager.java:1754)
at com.sap.ip.portal.admin.portalanywhere.QueryHandler.handleTopic(QueryHandler.java:152)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.executeActionHandleTopic(NotificationSAPJ2EE630.java:1141)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.notifyActionSubscribers(NotificationSAPJ2EE630.java:1089)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.receiveWait(NotificationSAPJ2EE630.java:386)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.broadcastAndWait(NotificationSAPJ2EE630.java:553)
at com.sapportals.portal.prt.service.notification.NotificationServiceDispatcher.broadcastAndWait(NotificationServiceDispatcher.java:192)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryAndGetResults(EventForwarder.java:122)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryToAllServers(EventForwarder.java:144)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.forwardEventToAllServers(EventForwarder.java:135)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.forwardUpdateToAllServers(ArchiveUploader.java:253)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doContent(ArchiveUploader.java:235)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Arguments : java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/ResourceException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__createServiceInstance(PortalServiceItem.java:727)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:613)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1042)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1563)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1518)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.restartQueuedApplication(PortalAppBroker.java:1866)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.updateApplications(PortalAppBroker.java:1702)
at com.sapportals.portal.prt.deployment.DeploymentManager.updateApplications(DeploymentManager.java:1754)
at com.sap.ip.portal.admin.portalanywhere.QueryHandler.handleTopic(QueryHandler.java:152)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.executeActionHandleTopic(NotificationSAPJ2EE630.java:1141)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.notifyActionSubscribers(NotificationSAPJ2EE630.java:1089)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.receiveWait(NotificationSAPJ2EE630.java:386)
at com.sapportals.portal.prt.service.notification.impl.NotificationSAPJ2EE630.broadcastAndWait(NotificationSAPJ2EE630.java:553)
at com.sapportals.portal.prt.service.notification.NotificationServiceDispatcher.broadcastAndWait(NotificationServiceDispatcher.java:192)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryAndGetResults(EventForwarder.java:122)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.sendQueryToAllServers(EventForwarder.java:144)
at com.sap.ip.portal.admin.portalanywhere.EventForwarder.forwardEventToAllServers(EventForwarder.java:135)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.forwardUpdateToAllServers(ArchiveUploader.java:253)
at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doContent(ArchiveUploader.java:235)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Dsr Component :
Dsr Transaction : 5f940fe0836711da887d000c29a5b62a
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : /System/Server
Resource Bundlename :
Session : 2391
Source : com.sap.portal.prt.runtime.broker
ThreadObject : SAPEngine_Application_Thread[impl:3]_15
Transaction :
User : xxx
[/code]
Looks like something is wrong in the service definition (portalapp.xml) but I have no clue. Class names are spelled right, settings the same as in EP6 SP2, yet the portal engine is not able to find the implementation class of the service.
Any ideas?
Cheers,
JuergenHi Detlev!
The ServiceReference definition previously was located in the application config under SP2, but didn't work either.
Now I found the solution. A sharing reference of all non-custom services in the application config and an additional sharing reference to my custom service in the portal application's config like this:
<application-config>
<property name="SharingReference" value="usermanagement,knowledgemanagement,com.sap.portal.ivs.connectorservice,landscape">
</property>
</application-config>
<components>
<component name="BGViewer">
<component-config>
<property name="ClassName" value="com.rag.ekportal.bginfocenter.bgview.control.BGViewer">
</property>
<property name="SecurityZone" value="sbi-ruhr.de/ekportal/medium_safety/com.rag.ekportal/components/bgviewer">
</property>
<property name="ResourceBundleName" value="bginfocenter">
</property>
<property name="SharingReference" value="com.rag.ekportal.bginfocenter.KMService.BGFetcher">
</property>
</component-config>
Case closed, thx for you hint. I awarded points.
Cheers,
Jürgen
Message was edited by: Juergen Wahlmann, solution included -
Absolutely USELESS Customer-LESS Service-LESS
Absolutely USELESS Customer-LESS Service-LESS
We have 10 devices with AT&T wireless and when my wife (authorized on the acct.) called to make changes - It was all DOWN HILL - 45 Min. & 4 people later, She was at the same place she began. Everyone wanted to transfer her to someone else - They have no clue about customer service! So, I went to a local store in RI where I met my assoc. who opened the acct. originally (many years ago) we confirmed,I too was authorized so, I ould call at a later time - WOW - I too got rejected as non-authorized on the acct. - Later, I called the store and was told - - Oh sorry, you will have to speak to a business rep. who's on the road but can call you back - SERIOUS? AT&T $ucks! Sprint yo'll have a new customer soon :-)https://www.att.com/esupport/article.jsp?sid=KB94735
The link above is to the page on transferring billing responsibility.
There are a few hitches which you may run into.
The owner of the new account must be able to pass credit check.
Lines with Next financing can't be transferred. In order to move those lines, you would have to pay off the Next installments.
The new account would have to choose from currently available plans and pricing.
I hope this helps answer at least the initial questions about splitting your account. -
Custom CAPI service - default value of varchar2 parameter
I have a Custom CAPI Service function. That function has a varchar2 parameter (argument) and I wish to set a default value NULL for that parameter.
I set Default=null, and when I generate CAPI package, my function in that package looks like this (notice the quotation marks around null):
function cs_cjn_prod_cijena
( p_nacin_prodaje in varchar2 default 'null'
return number
is ...
And it should look like this:
function cs_cjn_prod_cijena
( p_nacin_prodaje in varchar2 default null
return number
is ...
I tried setting Default Value Type to Literal, Database Function Call, Client Function Call, but it's always the same thing.
If that parameter was number or date it would generate ok.
It seems like the bug in "Generate CAPI Definition" Headstart Utility.
I know that I can make my function's code to treat the string 'null' as a null default value, but I'd like to have a "real" null as a default value.
Does anybody have a solution for this?
Thanks!
DaliborMarcel,
Thank you for your answer, but it didn't help. I have already tried using Database Function Call. This time I tried deleting the CAPI package from repository before generating it again, like you suggested, but it didn't help.
I still get: p_nacin_prodaje in varchar2 default 'null'
Which version of Create CAPI Definition utility do you have?
My version is: HSU_CAPI, Revision: 6.5.2.0 ("Help/About This Utility" in Headstart Utilities application)
Thanks again,
Dalibor -
Issue in setting custom identity service for soa 11.1.1.4
Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
BalaHi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks -
Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support -
How to get client IP in custom UCM Service
how to get client IP in custom UCM Service ?
have you tried
binder.getLocal("REMOTE_ADDR");
Let us know how you get on
Tim -
Custom Identity Service configuration in SOA Suite 11g
Has anyone been successfull in using custom identity service (available in 10.1.3.X) as a identity store in soa suite 11g human workflow component? If yes, please guide me.
Can you make sure your helloworld is using adf bindings as mentioned in thread Re: Urgent :: 11g Invoking Composite from Java/From Webservice Proxy
-
Integration of custom identity services with JDeveloper BPEL designer
Hi,
I'd like to know if a custom user repository plugin will cause the 'Identity Lookup Dialog' (Step 6 of Human Workflow Wizard to generate a user task) to utilize the list of users and groups from a third party provider, when used as the Custom Identity Service provider.
I'd like to have the custom list of users and groups at 'design time' of the BPEL process itself, as well as process runtime. Is this possible?
This is with respect to both BPEL PM v10.2.0.2 and v 10.1.3.1.0.
Regards,
Vineetok, thank you for the reply.
But the installation of the Oracle BPEL Process Manger for Developers which includes the JDeveloper and the BPEL Designer doesn't come with 10.1.3.1.0?
I have to install the JDeveloper and the BPEL Process Manager seperate?
Thx -
SharePoint Apps and custom web services as remote services
Hello,
After reading documentation about Apps for SharePoint compared with SharePoint solutions I did not find any information about "You
can develop your custom web services as remote services.".
Could you please give me links or advise, where I can get information - "How to develop custom web services as remote services" using SharePoint 2013 Apps?Hi,
I would suggest you to use WCF service instead of Web Service,
also, SharePoint 2013 introduces a Representational State Transfer (REST) service that is comparable to the existing SharePoint client object models.
Get started with the SharePoint 2013 REST service
About develop custom web services as remote services,see Demo here:
SharePoint 2013: Custom REST service provides data to an app for SharePoint
Best Regards
Guangchao chen
TechNet Community Support
Maybe you are looking for
-
Photoshop CS6 Trial "Installer Failed To Initialize" on Vista. Please help I have read other posts!
I've read through countless posts on different sites and still can't find a fix to this. I've been having a hard time trying to figure out what advice actually applies to me. After extracting all the files and I run the setup I get about 75% through
-
Photo appears too big on my screen? I cannot scroll it around?
I must have hit something wrong while workin on my photos today, now when I open a photo, itappears too big and there is no option to scroll, how do I get my screen to appear like it used to be?
-
FRM-92101 when password expired
Hi there, I have a custom login form. If the user's password has expired i am getting FRM-92101 error. This is the code i have when the user clicks on connect button IF (lv_errnum = 28001) -- password expired THEN al_id := FIND_ALERT ('ERRS'); SET_AL
-
Hi All, I have been provided with a 16GB RAM, 4 Processor on a 64Bit Windows Server to improve the performance of a DB that currently resides on 3GB RAM, 2 Processor on a 32Bit Windows Server. I have set the SGA parameters as follows. I am yet to fin
-
T430 screen. Which one is the right one ?
Hi there, My laptop is a lenovo T430 Type 2349-JV2 I need to replace the screen. I had a look on the website and found this list: http://download.lenovo.com/parts/ThinkPad/t430_t430i_fru_bom_20130410.pdf I saw that there is some 14HD+ screen 04W3329