Customer Order Records in Java using dataBase

hi can u help me on how to make a Customer Order Records in Java using DataBase?
may i know the code in the JCreator?
or the Syntaxfor this program..
Hope you will help me,,thanks a lot,,

Well, being that you're offering the maximum dukes, and you're cute, just sit back and relax while one of us does your homework for you. It's going to be a little difficult though, we need to don our mindreading caps too to figure out the exact requirements since you didn't post it.

Similar Messages

FM for Customer Infor Record Update without using Info no.

Hi,
how to create MM info records tcode me11/12 without having info rec no as one of parameters in export in FM ?
thanks

Hi,
use report RM06IBI0 (watch documerntation to that report)
A.

Create customer master record with reference

Hello guys,
I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
Thanks

Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

Error while invoking custom API using Database Adapter

Hi,
I've a requirement where in I need to fetch the data returned by a recordtype of a custom API. I've implemented this by invoking the custom API using Database Adapter. I'm facing a problem while performing this.
The custom API holds the signature as:
PROCEDURE EMP_DET
Argument Name Type      In/Out Default?
P_DEPTNO NUMBER IN
L_LINE_TBL TABLE OF RECORD OUT
I've a schema with which it needs to be validated. It looks like:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:po="http://www.mycompany.com/ns/sales" targetNamespace="http://www.mycompany.com/ns/sales" elementFormDefault="qualified">
<element name="EmployeeDetails">
<complexType>
<sequence>
<element name="EmpNo" type="integer"/>                    <element name="EName" type="string"/>                    <element name="Job" type="string"/>                    <element name="Mgr" type="integer"/>                    <element name="HireDate" type="date"/>                    <element name="Sal" type="decimal"/>                    <element name="Comm" type="decimal"/>               </sequence>
</complexType>
</element>
</schema>
I did a transformation to the above stated Emp.xsd with the xsd created for my custom API by the BPEL process. I could create the process and deploy successfully, but while invoking I get the following error. (I'm using BPM 10.1.3.1 with JDev 10.1.3.1)
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>6502</code>
</part><part name="summary"><summary>file:/D:/OraBPEL/bpel/domains/default/tmp/.bpel_my_poc_1.0_16c5d0f7b937c780d27d8975726a15cb.tmp/emp_details.wsdl [ emp_details_ptt::emp_details(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'emp_details' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
; nested exception is:
     ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>
Internal Exception: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Error Code: 6502</detail>
</part></remoteFault>
Can someone let me know as to why I'm getting this error? Also lemme know if such an approach is valid to do, if not please suggest me alternate methods to do this.
Thanks in advance,
Gayathri

The 'numeric or value error' is one we have seen many times. The problem has been identified and fixed. Refer to this thread for more information.
Issue with DB Adapter - ORABPEL-11811

How to append records in MSAccess through Java using JDBC:ODBC

Hello,
I was able to retrieve records from MSAccess database through JAVA over the JDBC-ODBC bridge.
If I want to append records to a table (for eg. photo1 table containing photono., length, breadth, area as
columns) I could not able to do so through JAVA.
I am using JTable with the above fields. The user is displayed with the JTable and he has to enter
data inside the JTable and press a button titled "Append". Then the JAVA program should append
whatever the user has entered in the JTable as a single record inside the MSAccess database.
Can anyone help me please?

hi i too am having similar problem. i am able to create a table in ms access through java but when i insert values i get a msg that it has inserted the values but when i check the table by opening ms-access there are no values in the table.
the insert statement i am using is
" insert into tk1 values(3,'tarun')"
further i tried using the methods commit, setAutoCommit etc with the connection object. -NO GO.
can you help me ?

VD05 - Customer master record blocked for sales orders and billing

Hi,
I have a scenario whereby I have blocked a customer master record for sales orders and billing using transaction VD05, but it still allows you to create sales orders and post billing documents.
What is the reason for this?
Regards
Gandi

Hi,
Block the customer for the sales order, delivery and Billing for the specific sales area in vd05
and try out,
Regards
Pradeep BV.

ALE / IDOC / sales order customer control record change

I'm trying to look for a "standard" answer. Here's my problem:
Record comes into SAP with a non-sap customer number that needs translated to SAP customer number.
Options I'm looking into:
1. Use the user exit and pull the customer characteristic from the customer master. Based on the characteristics then convert the control record.
2. Use the user exit at the sales order create. Based on the characteristics then convert the sales order and do not convert the control record.
3. Use standard EDPAR and convert the control record.
The problems:
If I use code to change the sold to custmer number at the control record level, I'd like to do the same thing at the detail level. The standard SAP code uses EDPAR. There are many different user exits based on the IDOC type in the system. I really don't want to change the code for each one.
EDPAR is maintained by IS. However, the customer master is in the business hands and is easily used. The customer master would be the perfered way to do things.
Any suggestions? Has anyone else had a problem with the customer number in the control record? We used to do it prior to moving the record into the SAP system. We would like to move away from that.
Thank you!
Michelle

OK so we have a strange setup. Yes, sold-to and ship-to is in the sales order.
The customer number in the control record is really our SAP sold-to number. It also is the partner number.   It is required for WE20. However when the IDOC comes into our system our customer doesn't always send the partner number. They can send their number for our company, the DUNS number or others. We have to take that number and convert it to our partner number.
While conversion from X12 to IDoc, based on the ISA ID or Sold-to party number you should map the correct SAP partner number onto the control record.
Coming to non-SAP sold-to party number in E1EDKA1 segment, the same non-sap sold-to number can be mapped to this segment but you should maintain EDPAR Entries. (VOE4).   Yes, I found that EDPAR seems to be the way SAP is expecting the conversions. However, we want our customer service to maintain the conversion.   That means that it has to be in a good format. So I could write a Z transaction over the EDPAR table for easier maintenance, or use the customer master screens. The customer master seems to be a logical place for custmer service to enter in the conversions. However, EDPAR is what SAP is expecting. So I decided to have them update the customer master via characteristics, and then use a BADI to send the information to EDPAR. Use "standard" functionality to change the control record. I believe it is a user exit.
Any questions?? I always have questions.   I think the above solution will work.   We haven't prototyped it yet.   That will happen soon.    My question was very generic and probably hard to follow.
Hopefully this clears up what I think we are going to do. Any other solutions would be appreciated.   The control record may or may not be correct when it is recieved. So we need to convert. Another requirement is that customer service has to set up the conversion values. VOE4 is not a good transaction for non-technical people to use.   So we need a better way.
Again we have voted to try the above solution. But I welcome any other suggestions.
Thannk you,
Michelle

How to use search term2 in customer master record

hi
how to use search term2 in customer master record. can anyone tell me plz
thanks
monica

Hi,
Search Term 2
Label used for search helps.
Only uppercase letters are stored in this field. Your entries are converted automatically to uppercase letters.
There are two of these fields for search terms. These fields can be used independently of each other.
Procedure
You can use your own criteria for entering the search term.
Example
You can enter the main part of the name or an organizational ID.
For example, for the company "Hechinger & Sons", you could enter "Hechinger" as the first search term.
The second search term could then be the name ID you use within your company, to help you identify your data later.
Please check out the following link:
http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9b331455711d182b40000e829fbfe/frameset.htm
Hope this helps.
Please assign points as a way to say thanks.
Regards,

Order By Clause on Non-Database Column using Forms

How to Sort by using Order by Clause on Non-Database Column using Forms6i

Eugene,
What is the error message/ number you are seeing? If you run "select name from tblperson order by name" do you still get an error?

Using Batch Record/Order Record for electronic Device History Record in PP

We are evaluating the use of PP or PP-PI for production planning at a medical device company and one of the primary considerations is the ability to create an electronic Device History Record. It looks like the Electronic Batch Record (COEBR) or Order Record (COPA) provides some of the capabilities required, but they do not appear to work with discrete PP. While I realize that the differences in functionality between PP and PP-PI are small (and getting smaller), I am surprised that SAP would require medical device companies to use PP-PI to handle this business requirement?
How have other companies dealt with the eDHR business requirement?
Regards,
N Powell

Dear,
This error occurred
If the 'Approved batch record required' indicator is set in the material master,
Batch release with inspection lot from goods receipt for a process order (origin 04) is possible, providing that the batch record exists and it has already been approved.
      See error message:
      Create and approve batch record first (EBR015) or
      approve batch record first (EBR016)
Please refer the OSS 152549 for details.
Regards,
R.Brahmankar

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 also how we can insert,update,delete records in list using ECMA script.

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
Thanks and Regards, Rangnath Mali

Hi,
According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
of the List object.
To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
failedCallback).
And to delete a list item, call the deleteObject() function on the object.
There is an MSDN article about the details steps of this topic, you can have a look at it.
How to: Create, Update, and Delete List Items Using JavaScript
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Send SMS while creating Customer Master Record using XD01?

Hi Experts,
We have a requirement that " Send SMS from XD01 (customer Master)". Send SMS to customer's mobile after successfully creating customer master record by pressing SAVE button in XD01 tcode.
Successfully, sending SMS through the ABAP program.
How to send SMS from XD01 tcode? I tried using USER-EXIT "SAPMF02D", but it is not sending and giving error message. If I send through the program, it is sending and working fine.
Whether I have to use Work Flows or any other solutions?
Please help me out.
thanks in advance.
Regards
Saray.

Hi,
Can you please paste your code here?
Also check BADI CUSTOMER_ADD_DATA in se18.
Regards,
Amit

How to record .jar file using Java Protocol

Hi,
I Tried to record .jar using Java protocol by using HR Loadrunner 11.0 Version tool.
Am unable to record the application.
Can any one suggest me the process of recording .jar file using load runner?
Thanks,
Venkat

Look at the manual page for jar:
# man jar
Also you can run them by doing:
# java -jar Prog.jar

Derivation of juristriction code using state in customer master record

Hi All
Is there any way to derive juristriction code using state field in the customer master record without writing abap code.
For exmple:
If state of cutomer is NY then juristriction code should be defaulted as NY000000
Thanks in advance

Hi,
It appears by your question, like there is one to one relationship between the state and the jurisdiction code. I am curious to know if you can create a CATT or LSMW program for customer master general data (KNA1) and just fill in state and jurisdiction code (fill in the values in excel) and then upload. You can easily apply an IF condition in excel for if state = NY then jurisdiction is xxxx. You may need one create program and one edit program. This is an easy solution rather than trying to automatically derive in SAP.
Regards
Sharabh

Req. Sample code for the Updation of Master record in MDM using Java API..

Hi All,
Can anyone provide me the same code for Updation of master record in MDM using Java API ??

Hi SakthiNarayananD,
You can additionally go through the following links to work with MDM and Java API:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49 (Java API)
http://help.sap.com/javadocs/MDM/SP05/(Java api programs)
https://help.sap.com/javadocs/MDM/current/index.html (java api codes)
http://help.sap.com/javadocs/MDM/SP06P2/index.html (Java Docs for SP06)
Reg: Using JAVA API - Search
Re: Retrieving Drop Down List Value using JAVA API - Lookup values
How to retreive records from Lookuptable of type flat - Lookup Values
Reg: MDM with webdynpro - READ,INSERT,MODIFY
Hope It Helped
Thanks & Regards
Simona Pinto

Customer Order Records in Java using dataBase

Similar Messages

Maybe you are looking for