Derivation of juristriction code using state in customer master record

Hi All
Is there any way to derive juristriction code using state field in the customer master record without writing abap code.
For exmple:
If state of cutomer is NY then juristriction code should be defaulted as NY000000
Thanks in advance

Hi,
It appears by your question, like there is one to one relationship between the state and the jurisdiction code. I am curious to know if you can create a CATT or LSMW program for customer master general data (KNA1) and just fill in state and jurisdiction code (fill in the values in excel) and then upload. You can easily apply an IF condition in excel for if state = NY then jurisdiction is xxxx. You may need one create program and one edit program. This is an easy solution rather than trying to automatically derive in SAP.
Regards
Sharabh

Similar Messages

  • Using RFBIDE00 for customer master upload

    Hi all,
       Does any one used batch input program RFBIDE00 for Customer master  Upload data in to SAP.
       Could you please explain how to use it...  its urgent, appreciare if your early reply..
       I am planing to use it through Run the program from SE38..
    Thanks..

    hi good sap1,
    Batch Input - Customer Master Data (RFBIDE00)
    Description
    All new fields for customer master records can be transferred to the R/3 System also with the report RFBIDE00.
    Furthermore, the batch input can be carried out with the existing record definitions. By means of the end of record marker, the report recognizes which record structures do not yet correspond to the extended record layout and initializes the new fields with NODATA.
    It is pointed out in the batch log, which structures are yet to be maintained. This should be done as soon as possible to be able to use the new functions or fields
    Introduction
    It is now possible to pass the information concerning tax categories and withholding types (for the extended withholding functionality) and the special Argentine fields via the standard batch-input program. Please look at the standard documentation if you need further information on the program.
    Additional Fields
    The additional fields have been added to the structures BKNA1 (general information) and BKNB1 (company code data). Please use transaction SE12 to see the fields of the structures.
    Enrichments for Tax Categories
    The following table shows how to fill the interface table BKNAT to pass the tax category data:
    Field
    Description
    Value
    Input
    STYPE
    Record type
    2
    obligatory
    TBNAM
    Table name
    KNAT
    obligatory
    XDELE
    Flag: Delete entry
       optional
    TAXGR
    Tax category
       obligatory
    Enrichments for Extended Withholding Data
    The following description shows how to fill the interface table BKNBW to pass the tax category data:
    Field
    Description
    Value
    Input
    STYPE
    Record type
    2
    obligatory
    TBNAM
    Table name
    KNBW
    obligatory
    XDELE
    Flag: Delete entry
       optional
    WITHT
    Withholding type
       obligatory
    thanks
    karthik
    reward me points if usefull

  • Send SMS while creating Customer Master Record using XD01?

    Hi Experts,
    We have a requirement that " Send SMS from XD01 (customer Master)".  Send SMS to customer's mobile after successfully creating customer master  record by pressing SAVE button in XD01 tcode.
    Successfully, sending SMS through the ABAP program.
    How to send SMS from XD01 tcode? I tried using USER-EXIT "SAPMF02D", but it is not sending and giving error message. If I send through the program, it is sending and working fine.
    Whether I have to use Work Flows or any other solutions?
    Please help me out.
    thanks in advance.
    Regards
    Saray.

    Hi,
    Can you please paste your code here?
    Also check BADI CUSTOMER_ADD_DATA in se18.
    Regards,
    Amit

  • Transfer Customer Master records from one company code to another company.

    hi ,
        working on a rollout project ,
    needed to transfer Customer Master records from one company code to another company code.
    is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
    thanks in advance.
    rahul
    Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AM

    Hi,
    I think you should ask this question in functional consultant forum.
    Thanks,

  • How to use search term2 in customer master record

    hi
    how to use search term2 in customer master record. can anyone tell me plz
    thanks
    monica

    Hi,
    Search Term 2
    Label used for search helps.
    Only uppercase letters are stored in this field. Your entries are converted automatically to uppercase letters.
    There are two of these fields for search terms. These fields can be used independently of each other.
    Procedure
    You can use your own criteria for entering the search term.
    Example
    You can enter the main part of the name or an organizational ID.
    For example, for the company "Hechinger & Sons", you could enter "Hechinger" as the first search term.
    The second search term could then be the name ID you use within your company, to help you identify your data later.
    Please check out the following link:
    http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9b331455711d182b40000e829fbfe/frameset.htm
    Hope this helps.
    Please assign points as a way to say thanks.
    Regards,

  • Unable to make postal code as Optional in Customer Master

    Hi,
    I am unable to make postal code as Optional in Customer Master.
    I have defined it in customizing that the postal code is Optional (Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Account Groups with Screen Layout Customers)
    see screenshot attached.
    But then when I go to créate a customer for that account group the system asks for the postal code as mandatory.
    Any help??
    Thanks!!!

    Hi,
    Go to T-code: OY17
    Select your country then check if “Postal code required entry” maintained with check mark in further checks section
    Thanks,
    Krishna.

  • Account Group and partner functions in customer master records

    Hi Gurus,
    I need your help to confirm the following understand if correct:
    1. To create customer master record for partner function Ship-To, need to create a customer master record using the uniquely assigned account group for Ship-To , that is, 0002 . In this ship-to master record, define in its partner function tab, the other partner functions related to it. 
    2. To create the above, it cannot be achieved by just assigning the partner functions in the partner function tab of SOLD-To customer master record , created using account group 0001.
    Question:
    1. How does the system know or allow what codes a user can select (f4) or enter manually when defining in customer master record's partner function tab, the partner functions and their respective codes?
    How is this controlled? Is it by user authorization? or will user / sales administrator be able to select any codes tied to a partner function?
    2. Lets say there are 2 partner functions : Sales employee VE and 9E called Sales Representative. Both of these partner functions are of Partner Type PE.
    When defining in customer master record's partner function tab, how does the system know what codes is selectable for the administrator for each of these partner functions?
    best regards
    M Russo

    hi russo,
    this is to inform you that,
    1. yes you are right.
    2. you need to follow the steps as you said.
    Question:
    1. that you can find in the search basing on account group for partners.  that assignment we should know russo which SH to be assigned to which SP.  no need to have authorization for that, make a note of the list of SH and SP to be assigned that's all.
    yes, he will able to select any SH from the list but make sure that we assign the correct SH to the list of SP.
    2. that you will be defining it in Partner Determination Procedures.  at the time of CMR creation you have to select the correct code that will get populated in sales order.
    hope this clears your issue.
    balajia

  • How to change the field sequence in Customer master record.

    Dear Friends,
    We are required to chage the sequence of customer master record fields that are available under different tabs of 'General Data', 'Company Code Data' and Sales Area Data.
    Our client requirement is to place all mandatory fields in the first screen of customer master record. Here the intention is to save the user time instead going and clicking multiple tabs/screens to fill information on only one or two tabs. Please suggest us the availabe solution in SAP for this requirement.
    Thank you
    Raghu Ram.

    Hi
    Step 1: Take help of a FI guy and:
    The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
    Step2 : The challenge inyou project is to have a single tab with the allowed fields
    A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
    Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
    This would be a better option than fiddling with SAP system
    Regards
    Nikhil

  • Facing Problem in creation on Customer Master Record with reference

    Dear SAP Experts,
    I am making a New Customer master record with referenec to existing one. Account  Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
    Customer Record Details-
    Account Group - Stock Transfer Depot
    Customer - 1101
    Compnay Code- 1000
    Sales Organisation - 1000
    Distribution Channel -20
    Division - 01
    Reference:
    Customer - 2001
    Comapny Code - 2000
    Sales Organisation - 2000
    Distribution Channel - 20
    Division - 01
    Error: ENTER A NO BETWEEN  A001 AND Z999
    I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
    Lokking forward for your quick response on the same.
    Regards
    Parul Deshwal

    Hi Parul Deshwal,
    - The number range is created in XDN1.
    - The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
    Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
    Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
    Best regards,
    Glynn

  • Create customer master record with reference

    Hello guys,
    I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
    Thanks

    Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

  • BAPI to create customer master record

    Hi ,
    I was looking for the BAPI to create the customer master record in R/3. we are using the ERP 2005 system .
    I did find the BAPI but it will only creat the personal information of the customer .
    I was looking for a BAPI that will create the whole record of customer including the company code . sales area record .
    Hope someone knows abt this.
    I have to use this in a sync interface with siebel system
    Thanks
    Nikhil

    Hi Michal ,
    I had a loojk at this BAPi but this will only populate the customer personal data. we will have to make a refe to a existing cust to extract the company code data and the sales area data
    Thanks
    Nikhil

  • Where to Store D&B # (DUNS) on customer master record

    Hello,
    I've been trying to find a field to store the Dun & Bradstreet (9 character DUNS #).  I had heard there was a field available in R/3, but can't find it anywhere so I might have heard incorrectly.  After doing some searches I can only find the field available on the BW system.  I also came across a field on the vendor record but that's not going to be helpful either.
    Is there a field to store a DUNS number on the customer master record?  I'm on ECC6.
    Thanks,
       Jonathan

    Hi jonathan
    If you want to know where the data is getting is stored like customer changes (i.e. address changes, sold to another company, credit scores, etc...).Then go to sales area data ->environment->sales data and click on execute. System will show the tables and fields which have been changed and when they have been changed
    use t.code VC/2 for sales summary , may be this will help you
    Regards
    Srinath

  • Maintain Sales Tax Exemption Certificate info in Customer Master Record

    Hello people!
    I really need your help in this one: we are going to implement SAP in a company settled in Canada. The users requested us that it is highly important to maintain Tax exemption certificate for GST (GST is "Goods and sales tax" -- not withholding) in the customer master record.
    I couldn't find anything in SAP to store this info in the Customer Master Record... have you ever had this issue before? is there a workaround? We are not using any external tax system (for example: Vertex). Any information is useful. Thanks in advance. Maria.

    Hi Maria,
    I was going through how GST works and I think you can create Tax codes under withholding tax and use the same as withholding tax.
    As per my understanding of GST, all your process can be met...
    However, for reports because there is no standard avail, you would need to develop reports..
    Hope this helps..
    Cheers,
    Redoxcube

  • About customer master record

    hi
    how to delete the customer master record in the company code
    regards
    raj

    Hi Rai,
           U can delete customer master record company code based by using Tcode XD06, Sales org based by using Tcode VD06.
    simply if u created customer by using Tcode XD01, for deletion u can use XD06, in case if u created by using Tcode VD01, then u can use VD06 for deletion.
    Regs,
    Ravi Duggirala

  • Zfield is not apearing in the batch input session ( Customer Master Record)

    Hello,
    We have added one Z field in the customer master record (sales are tab). But this Z table not appear in the Batch Input session(SM35). My user want to update this field for all the customers at once, but this Z field not appearing even in MASS transaction.
    For your information, we have appended the KNVV table. Can any one of you give some suggestions on this.
    Regards,
    Srinivas.

    It's rather easy via a custom ABAP program to wait for the end of a batch input session. Some codes were already pubilshed (look whole SCN for APQI-QSTATE).
    What you can do is to select the sessions to be started via this custom program, and it will submit a job which will run in an endless loop until the last session is released. It might use a WAIT UP TO X SECONDS to sleep for a few seconds between each scan of session status.

Maybe you are looking for