Customer sales area

Hi,
   When i try to create a sales order for my customer, i leave the initial sales area blank....on the create customer: initial screen.
I then enter the sold-to-party in the sales order overview screen and then it prompts me to enter my sales area out of a few sales areas existing for my customer. However, it always excludes the sales area which i have set up. Could anyone explain how i can choose my own sales area for the customer?

Hi Aditya,
While creating a customer in Transcation Code XD01 give all details in Sales Area.(Sales Org,Dist.Channel & divison) If you want you can give sales office & sales group also.
When you enter this sold to party in your sales order transaction automatically sales Area for that sold party will be picked.
In sales order all details about custmer from customer master record.
Reward if you find suitable answer.
With Best Regards,
Gayatri Patil

Similar Messages

  • Credit Limit - Customer/Sales Area Combination

    Hi Gurus
    I need to maintain a credit limit for my customer sales area wise.. i.e at company code level I have a limit of Rs 10000/= for the Customer "X" . Now i need to split the credit limit for the customer "X" in the following fashion.
    1. Sales Area "A" - Credit Limit - Rs.4000/=
    2. Sales Area "B" - Credit Limit - Rs.5000/=
    3. Sales Area "C" - Credit Limit - Rs.1000/=
    When i raise the Sales order for the customer"X" ,for Sales area "A" for the sale value of Rs.1000/=, then the Credit limit for the customer "X" should reduce to "Rs.3000/=" . Is it possible ? if so how? Plse provide ur valuable inputs on the above. Thanks in Advance
    Regards
    Anis

    Dear Anis,
    Credit Limit is set at Credit Control Area level & not at Company code level. Thus if you note in FD32 screen, there is no selection option for Company code.
    Now Credit control Area level is above Company code level. Thus to have Credit Limit based on Sales Area, then you will have to create Multiple Credit Control Areas & assign the same to Sales Area at IMG - Enterprise Structure - Assignment - Sales and Distribution - Assign sales area to credit control area.
    Then you can set Sales Area-wise limits for Customers.
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • BAPI to Extend Customer sales area

    Hi experts,
    I have an requirement to extend customer's sales area by using BAPI. That means for customer A which has already assigned sales organization 1000 then we want to extend it to sales organization 2000. We can manually do this by using XD01 or VD01. My question is if we can find a standard BAPI to do this? 
    Regards,
    Duke

    Hi,
    You  need to create a program in order to copy the data for source sales area to target sales area for a certain customer?
    If it's so u can create:
    - or porgram in order to prepare a file for std BI RFBIDE00,
    - or a BDC program to simulate the transaction VD01: here u can indicate a sales area as reference from to pick up the data to be copied in the target sales area.
    - or program uses the BAPI_CUSTOMER_CREATEFROMDATA1, here u can assign a sales area as reference
    Hope this will helps you.
    Regards,
    Kiran

  • Extending customer sales area screens

    I'm looking for some guidelines concerning how to extend the screens for XD01, XD02 and XD03. I need a new tabbed page with some additional  customer master data fields to be added.
    I think I have found the right area in SPRO, which is
    Logistics - General -> Business Partner -> Customers -> Create Tab Layouts -> Create Tab Layouts for Sales Area Data
    But I'm not sure.
    HAs somebody done this before, who can point me to a good explanation?
    BR,
    Tony.
    Edited by: Anthony Bateman on Feb 10, 2010 11:11 AM

    Hi
    U can use the following BADI in order to add new TAB CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS
    Max

  • Fm or BAPI for Change Customer: Sales area data

    Hello All,
    I need to change tax classification in Sales area data of Changing Customer ( transaction XD02 ).
    Function BAPI_CUSTOMERCRM_CHANGE looks like is ok for this, but I've try it and is not working, maybe i'm forgeting something or is not proper for this.
    Do you know a function for this or an sample with BAPI_CUSTOMERCRM_CHANGE ?
    Note: Function must not be for online store and Internet Sales.
    Any help will be appreciated and rewarded.
    Thank you a lot!
    Bogdan

    Hi again,
    Not the BAPI COMMIT was the problem,
    But I found FM SD_CUSTOMER_MAINTAIN_ALL, which is working realy fine.
    All the bests!

  • Customer sales area data not replicated to CRM

    Hello,
    I'm setting up the data replication model for master data based on configuration guide C03.
    We have the following customer master situation:
    existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
    new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
    PIDE settings are fine.
    The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
    So far so good.
    But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
    Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
    Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
    System environment:
    CRM 7 EnhP2 (CRM RDS)
    ERP 6 EnhP6
    Kind regards,
    Koen

    Hello,
    I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
    Cheers

  • How we add parter function in customer sales area usinf xd02

    how we add parter function.in xd02.any function module or user exit is there.
    it check first whether parter exit or not if not exit then add to atb partner function tab in XD02.any bdc how we add at run time this

    u can check with lsmw

  • Customer not extended to sales area

    Hi experts,
    Even though I have extended a particular customer to the given sales area, division and distribution channel, when I run the program I still get the error saying "Customer not extended to sales area" . What could be the reason for this? I am a ABAPER. I am new to SD transactions.I have checked in xd02. the customer has been extended. Where else should I check?
    Please explain in detail
    Regards
    kalyan

    HI,
    Which program are yout trying to run?
    How did you extend the customer? If through XD01 then try going into XD02/XD03 and enter customer and click on customer sales areas. You should be able to see the sales area that you have extended the customer into !
    Regards,
    Amit

  • Tax classification sales area wise

    Hi All,
    I have customer extended in 2 diffrent sales areas.
    Now i want 2 maintain 2 diffrent tax classifications for the customer sales area wise.
    But the problem is that when i change tax classification "1" in one sales area it automatically gets changed
    also in other sales area.I want to maintain 2 diff. tax class. in 2 diffrent sales areas.
    Can anybody help me on this.
    Rgds

    Yep..
    I had chkd that it is already assigned.
    My prob is when i am maintaining "1" Tax classification UtXJ in my one of the sales area for the customer it is automatically
    changing the same to the other sales areas too.........
    I dont know y dis is happening coz the sales area data can be diffrent for the customer sales area wise ..
    Rgds

  • Error in sales area while creating sales order

    Can anybody guide us in solving following issue-
    While creating a sales order, if there is mismatch between customer sales area (Particularly division) and material master division-
    1.the system is giving error message & not allowing to save the sales order for one sales area,
    2.but at the same time it is giving warning message and allowing to save the sales order for other sales area.
    Thanks & Regards

    Dear Mrunal
    Check in IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Business Area Account Assignment --> Define Rules by Sales Area whether the respective Sales Organization, Distribution Channel and Division are assigned.
    Also check in <b>OVXG</b>.
    Either of the above is missing in your configuration and hence the error.
    Thanks
    G. Lakshmipathi

  • Copy Controls - Sales Area

    Hi Good Afternoon,
    I am working on implementation for Realtor's.
    Issue is Here we crate an Quotation with reference to Enquiry.
    At the time creating Quotation is there any option to change the customer sales area?
    Is it fit Standard Copy Controls or need to write new Routine.
    If it is required to write new Routine please tell me details of the New Routine.
    Thanks in Advance
    Madhu Rama rao

    Hi,
    You can achieve this by maintain combine sales org, dist chl and division.
    Path : Spro-> Sales and Distribution>Sales->Sales Documents>Sales Document Header>Assign Sales Area To Sales Document Types>Combine sales organizations.
    For master data reference
    path :Spro-> Sales and Distribution->Master Data--->Define Common Distribution Channels and Define Common Divisions.
    Regards
    vK

  • How can we change SALES AREA  in our sales order (VA01) ?

    suppose i have created a sales order in VA01 by taking a sales area BP01 01 00, and after saving, it generates a sales 0rder number.
    but after creating, i realize that the customer i have taken in the sales order, is wrong.
    we change the customer in the sales order via VA02, but the sales order is not accepting the customer because its(customer) sales area is BP01 02 00.
    one way is to extend the customer for BP01 01 00.
    but i need the sales area BP 02 00 in my sales order, how can i change the sales area from BP01 01 00 to BP01 02 00 in our sales order?
    thanx in advance.

    Hi,
    After extending the customer all your can do is delete your earlier order and create a new order.
    The sales order no generated previously by the system gets wasted/archived.
    Regards,
    Amit

  • Sales area data screen -BDC

    Hi All,
            I have a requirement that when i click on the kunnr field in alv report it should go to
    transaction  XD02 and should be on screen Customer sales area data..
    if i use call transaction 'XD02' and skip first screen it goes to 'Company code screen'
    and hot the sales area data screen
    so can anybody pls tell me how to achiece this means can we use BDc if yes pls provide the cdoe
    i used bdc but when i record it goes screen by screen and finaly reaches sales area data.
    if i use display all screen if i use 'N' mode it do not got to sales area screen
    but the user want to directly navigate to sales area data screen when he cick kunnr field.
    thanks

    Hi pankesh,
    while recordin in SHDB when the screen moves to sales data screen record the screen by inputting some error data and while calling the transaction through CALL TRANSACTION use processing mode as 'E' so that the the BDC will get stuck in the sales screen and the user can rectify the data and then continue.
    Regards,
    Anil N.

  • For XD01, Sales area data tab greyed out

    Hi,
    User has XD01,XD02,XD05,XD06,XD07,XD99.when user tries to use XD01 with parameters customer,sales org, dist channel and division when go to customer : sales area data screen,sales area data tab is greyed out.It shouldnot be greyed out.what is the cause of it.user has proper authorization for SD.

    Hi,
    Try with OBD2 tcode...
    Also, make sure that while creating customer, you enter sales org., dis channel, & division....
    Regards
    Edited by: SAP2020 on Jan 27, 2010 11:08 AM

  • Sales Area Bundling

    Hi All,
          What is  "Sales Area Bundling in SAP CRM? Please forward me some information regarding this.
    Regards,
    Srinivas

    Hi ,
    I have gone through your query and answers. I think you first check into table KNVV(customer Sales Area data) table and if it is not there please maintain it. You can also check into VOPA transaction custmer master and check the Partner procedure assigned to your sales document type.
    thanks
    Hemant

Maybe you are looking for