Customer Tool use in production

Dear all,
in my project scenario, customer will order for a tool to plant. tool will be purchased by plant with different material number. then plant will bill the tool to customer.
logically after billing, only billing doc will be send to customer but the tool will be stored in customer consignment.
now my question is, this tool iam using in my production routing as PRT. i need to track the tool in my inventory and production. since it is already in customer consignment i cannot do anything.
please share your ideas how to track the tool which is under customer consignment
Regards
Sridharan

Hi,
Thanks for the reply. request some clarifications
without consignment how can i maintain in inventory as customer tool.
moreover i need to use the tool in production, if it is consignment, GI to production will be difficult.
further, how can i identify the tool in different bins without using WM.
Regards
Sridharan

Similar Messages

Suggestion for Iridium I/O third party tool use in production environment. Is Good or bad to use?

Hello Everyone,
we are planing to use Iridium I/O third party tool in one of our critical production environment to improve the performance.
but i want to know is it recommended for such type of critical servers?.
if i use this tool find any performance improvement.

Hi Baraiya,
Iridium I/O is certified by Microsoft. It can help to fix SQL Server performance instead of just pointing out performance problems . Benefits of using Iridium include the following aspects. Refer to:
Iridium I/O for SQL Server.
•Faster transactions
•Faster batch jobs
•Reduced blocking and deadlocking
•Faster sorting in tempdb
•Speeds up queries from 3rd Party apps that can't be tuned
•Speeds up queries that are already "fully tuned"
•Speeds up the 95% of queries that the DBA never has time to tune
In addition, there will be no impact on the SQL databases when Iridium is removed. Personally, I recommend you install the Iridium I/O in a test environment, and check if it meets your requirement, then use it in the production server.
For more details , you can also review this blog:
SQL SERVER – Iridium I/O – SQL Server Deduplication that Shrinks Databases and Improves Performance.
Thanks,
Lydia Zhang

Want to Know the Life of Tool used in Production

Hai Guru,
I have assigned PRT to the Routing and the PRT (Material) is coming and getting the total Quantity required for Production but after production Iam not able to calculate the Actual Quantity (confirmed Quantity). Please guide me how to calculate the formula.
Also give me the Formula to calculate actual quantity & Actual Usuage value.
Regards
Davey

Hi,
Please go through following links which i am providing :
1) http://www.adobe.com/devnet/flash-builder/articles/ascode-coverage.html
2) http://opensource.adobe.com/wiki/display/flexpmd/FlexPMD
3) http://opensource.adobe.com/wiki/display/flexpmd/FlexMetrics
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help....here I am

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help

This forum is none of those things. That being said, we may be able to help.
Have you tried uninstalling and reinstalling the product? If not, please consider following these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

Absolute horrible customer service!!!! I cannot use a product I've already paid for and no one is helping!!!!

So I have been a longtime Adobe customer. I have nearly every version of the creative suites, with all the bells and whistles and have spent thousands and thousands of dollars on these products for our business as well as personal use. SO.....we just upgraded the OS on our primary editing bay, and I found that I needed to reinstall the Premiere Pro 5.5 upgrade to the system that I purchased online a couple years back. I go to access my online account, and it said that I needed to reset the password, but the problem is that the email that was used is not turned off and I have no way to access.
Thinking that this was not a big deal, I contacted support via the chat system. The first person told me he could not help at that time, and while asking a follow up question he (or she) cutoff the chat. I immediately started another chat. The next agent stayed on, but also said that they could not anything, but they would escalate it to the next group up, and that they would transfer the account to my current email address. That was nearly 3 weeks ago.
I have since received emails nearly daily apologizing for the delay (a form letter) in resolution. Then I got another email saying I needed to write a letter saying what I wanted, and that should take care the problem. So....I did. Then I got another email.....this time saying that the letter was not enough, and that I would have to add a scanned image to the letter of my government issued ID. I replied, indicating my patience has run out after 3 weeks, but sent the letter again as requested. And guess what??? Today I get another email with an apology, and that it would be escalated to another group to see if they could do it.
This is not acceptable in any way. I have to get my keys to the 5.5 upgrade as its using the trial version right now since I can't login to get my keys....and NO ONE AT ADOBE IS ABLE TO DO A THING ABOUT IT. How hard is it to change the access email to ones account, or have it transferred to the new one. (I had to sign up for a new account with the correct email just to post on the forums).
SO PLEASE.....if there is a competent person left there, that can take care of this problem please do. I just need my purchases attached to this account!!!! . I will have no choice but to start seeking a legal remedy within the next 48 hours is not resolved. I have a project that has to be completed, and due to this incompetence I can't use a product I have already paid for. It should never take nearly 3 weeks for this to be resolved.

Thanks Steve, I appreciate any help that can be provided. I’ve tried to be patient but after getting yet another Friday saying the exact same thing about it being escalated to the right group (which is the same email I’ve gotten day after day for 3 weeks) I have had enough. Clearly whomever is handling the general customer service, in whatever country they are in really do not care or even have a process to follow. They just clear their cue apparently so that they make their personal numbers. (I was formerly a tech support manager for one of the large PC and peripherals producer....so I am familiar with some of these antics, though we would have fired someone for something like this). Given how much I have paid to Adobe for their products over the past ten years as a business owner it a shame that this is not getting resolved.

I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Custom cropping using pixel dimension

The banner image module for my website requires images cropped to 940 x 400 pixels. When I use the Custom cropping function in PSE 12 (on a Mac OSX 10.9.2), it only shows a cm dimension. Can I do a custom crop using a pixel dimension?

You should just be able to type 940 px and 400 px in the width and height fields
Another way is to use the Rectangular Marquee Tool and use Aspect>Fixed Size then enter 940 px X 400 px

Custom report using KM API Error

Hi All,
I have to create a report using KM API. i got the custom report using KM API from sdn and I imported into my NWDS. While i compile it, it is giving me this error.
"The project cannot be build because the classpath for com.sap.netweaver.bc.rf.common.exception.ResourceException is not found."
I have imported all the required jar files.
How can i rectify this error? Could anyone help me out in this issue?
Regards,
Divya

Hi Divya,
> I have imported all the required jar files
First, I don't know what you mean with "imported" - in any case, you should not put the JARs into your project but just reference these.
Also, obviously you have not referenced all the required jar files; ResourceException is part of bc.rf.common_api.jar, which is part of portal application com.sap.netweaver.bc.rf, at least for NW2004s.
Please use the ClassLocator tool (search the WebLogs for this term to get some initial instruction) to avoid such questions in the future. It will make your life much easier.
Hope it helps
Detlev

Need to add extra fields in Custom tab using EEWB.

hi ,
I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
Now when I am creating new project i am loosing the old field names. It creating the new fields with new field names.
My requirement is I should create a new fields without changing the old field names.
So Please can any one help me as how to approach these without deletion or changing the existing field names.
Finally my custom tab should contain 12 fields.
Thanks
viswa

Hi viswa,
I have a requirement to add 2 new fields to the Standard Transaction (called BP ).
I have gone through various concepts like EEWB and BDT tools. But, still I am not able to get the things well.
So please provide me with the procedure to explore things and work on the requirement.
Thanks in advance.
Regards,
Vishnu.

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

Working with Custom SQL Using Descriptor Query Manager Queries

Hi All,
I am Working on Descriptor Query Manager Queries
Configuring Custom SQL Using Java and Workbench
Using Java I wrote a static method as in the code given below.
public static void insertEmployee(ClassDescriptor descriptor){
descriptor.getQueryManager().setInsertSQLString(
"insert into EMPLOYEE (EMP_ID, EMP_NAME, EMP_JOB, SAL, DEPTNO) values (#EMP_ID, #EMP_NAME, #EMP_JOB, #SAL, #DEPTNO)"
I wrote a insert SQL Query in the custom SQL tab of the Toplink workbench .
Using java and Using Toplink Workbench I had a problem how to call this insert query in the sessionEJBBean .
Can any one suggest me in this regard.
Thanks in advance
regards,
Satish

What is the problem you are experiencing?
Normally you can just execute the query by calling
'executeQuery(queryName, domainclass) on the session.
See also
http://www.oracle.com/technology/products/ias/toplink/
doc/10131/main/_html/qrybas003.htm#BCFIBGGJ
Just out of curiosity: why do you need a custom SQL
to insert something? Can't you use persist()?
regards,
LonnekeOr even UnitOfWork ? Why go down the route of using custom inserts to insert objects unless you have some business logic that Toplink's UnitOfWork API cannot provide ?

LSMW as a customizing tool

Hi all,
We are searching a good method to organize the customizing for a project. We have heard that the LSMW can be used as a customizing tool. That is, for example you save all the customizing for SAP system and you can load this customizing into another system.
Can that be made with LSMW??? Can anyone provide us with some examples about this use of the LSMW??
Thanxs.

Panel is the name, Palette has been abandoned.
Anyway, I can find what appears to be the set you are looking for in the fly-out-menu.

Why do I have to Sign In to use my product?

Why do we have to ask the community (which basically is quite ignorant) our questions when Adobe has the answers? We buy the product from Adobe, but have to ask people who don't really have a clue how to solve the problem. Why can't we ask Adobe? Have they gotten so big that we, the consumer, don't count anymore? Are they so big that it's up to the users to solve their problems when it's Adobe's job to answer and solve the issues? Just curious because it's getting harder and harder to reach Adobe to get help. Shuck's you can't even e-mail them any more. Instead they have these "Forums." Lame. If you do have the opportunity to make it through to a live person, they're from a continent that speaks a language similar to ours but all they can do is appologize instead of fixing the problem. This is really poor customer service. Am I the only who feels this way?
Oh yeah my question/discussion; "Why do I have to Sign In?" I bought the product, installed the product, now I have to Sign In or I can't use the product - it will become unusable?

Hello George,
You should really be co-operative around here to get help. Charles is one of the most helpful members to the forum and has been, for a long time now.
Anyway, I don't want to get there.
These points from the FAQ clearly answer your question - WHY:
Q. What if the customer does not have Internet access at installation?
A. There are two options if the customer is offline at installation:
• If the customer’s computer is temporarily offline (e.g. he or she is travelling or has Internet connectivity
issues), the customer will have seven days after the first launch of the product to connect to the Internet
and log in with his or her Adobe ID.
• If the customer’s computer is permanently offline (e.g., he or she works in a secure environment), the customer
will need to complete an Offline Activation process using an Internet-enabled device, also within
seven days of the first launch of the product. See below for more information on the offline activation
process.
Q. Why will an Adobe ID be required for Creative Suite 6 perpetual products?
A. Adobe Creative Suite 6 products’ serial numbers (for perpetual licenses) and Adobe subscriptions will now be
registered under a customer’s Adobe ID. Adobe IDs provide customers with easy access to their serial numbers,
subscriptions, free or paid areas of Adobe Creative Cloud, as well as the Adobe.com community. Customers can
visit My Adobe at https://www.adobe.com/account.html to access their serial numbers and subscriptions.
Q. Do users need to be online to use Creative Suite 6 perpetual products?
A. No. After the one-time activation and login process, users no longer need to be online to use Creative Suite 6
perpetual products.
Note: For Adobe product subscriptions or Creative Cloud memberships, recurrent Internet connectivity is required
to confirm subscription status.
Q. How does offline activation work?
A. To perform offline activation, the customer should click the “I cannot access the Internet” link in the product
launch screen and then follow the prompts. Once the offline computer generates a machine-specific Request
Code, the customer will need to use an Internet-enabled device to access www.adobe.com/go/getactivated and
enter the Request Code where prompted. The customer will receive a Response Code that must be entered in the
offline machine to complete the offline activation.
Important Notes: Request Codes are machine-specific and only valid for 72 hours. Customers need to request
one code per machine and can easily request a new code if the process has not been completed within 72 hours.
For more information, go to www.adobe.com/go/getactivated.
The reason for activating it online - so that YOU have access to your serial number (even if you lose it, ever). Yes, we have seen many a people losing their serial numbers - some in 1 month of activation and some after 2 years. When you activate it online, your serial number is assigned to your Adobe ID. Take for example, a Mac. You need an Apple ID to be able to use the App Store - to keep track of all your purchases as well as your subscriptions. This is exactly the same.
You don't have to keep doing this every week. It is one-time only activation for perpetual licenses. The 7 days mentioned is the period you get to use the software without activation.
Trust this helps.
If you still need further support and if you want it from Adobe directly, like I mentioned earlier, please tweet @Adobe_care.
-ST

XLR - How to display top 5 customer or top 5 products?

I am trying to modify the XL Reporter Dashboards and I am stumped by the following issues:
Display top 5 customer
Display top 5 products.
Could someone please help with this project?
Your help is appreciated!!
John

Hi John,
The syntax for this is:
FACT Top 5 BPA(*) Order By Fig.SO_DocTotal Descending
There is a good document on the SAP portal called XLR Syntax and Functions which covers this and the XLR specific date and period type functions that I found (and still find) very useful.

Customer Tool use in production

Similar Messages

Maybe you are looking for