Customer wise Billed quantity and Receivables

Dear All,
Is there any standard report in which I can have Billed quantity and Receivables (collection amount ) based on the customer and date wise ,
Regards
R Dhana

Hi Dhana,
Check the below T-Codes it will be helpfull+FD10N
1.S_ALR_87012167-Accounts Rec. Information System
2.S_ALR_87012172-Customer Balances in Local Currency
3.S_ALR_87012186-Customer Sales
4.S_ALR_87012169-Transaction Figures: Account Balance
5.S_ALR_87012168-Due Date Analysis for Open Items
6.S_ALR_87012197-List of Customer Line Items
7.S_ALR_87012174-List of Customer Open Items
8.S_ALR_87012175-Open Items: Customer Due Date Forec.
9.S_ALR_87012178-Customer Open Item Analysis(Overdue)
Regards,
Venugopal

Similar Messages

How to get Item-Code wise stock quantity and value for a previous date

Dear Sir,
As per the government legal requirement , we are required to furnish a list for items having stock as on a date ( date is not the current date but it is some past date) and in the list we need to provide material wise stock quantity and value .
We can generate a list for the current date , but do not know how to get it for a previous date .
We request you to kindly guide us about such a list .
With Thanks and Regards
Sonia Agarwal

hi,
might be this reports will be help full for your requirement.
MMBE
MB53
MB52
MB5M
MB5B
MB5T
MBLB
MBBS
MB54
ME56
Thanking you

Billed Quantity and Value Report

Dear All,
Is there any standard report in which I can have Billed quantity and Billed amount on the basis on Material Group? If not then if there any way to cater the data fom standard.
Thanks in Advance
Nomi

Dear Nomi
How about MCBK, MC dot N, MC dot O. ?? If these reports does not fulfill your requirement, then, you can go to table SE16, input table VBRK and have the selection optiom as Material Group.
thanks
G. Lakshmipathi

Customer wise Billing type

Dear gurus
I have folllowing requirement.
We want to have separate Billing type for certain customers.
But order processing will be through stadard order type OR for all customers.
Is this possible.
BJ

hi,
The document types are independent of customers. The billing docuemnt type takes reference either from delivery or order doc type.Hence for specific customer with same order type u can't have different billing types.
You can try this, confi order type, delivery type & billing type for the specific customer else please consult with ur abaper for ur requirement
regards,
Arun prasad

Customer wise Materials Quantity target

Hi all,
The requirement is as below,
For customers we would like to set sales quantity targets,
like for 1 custoimer specifically combined for 10 materials we will set 5 Tons target,when we have done dispacthes of 5 ton of those specific materials(can be multiple deliveries) ,next time when we create order we should get intimation thst the target is completed.

Hi,
I think that it's too vast to write here. Please read the info in the link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744d05546011d1a7020000e829fd11/content.htm
Regards,
Mario

How to change Billing quantity

Hi,
business scenario: the sales order is cross company sales, delivery use POD. when bill to customer, the billing quantity is POD quantity; when bill to receiving company, we want that the billing quantity is delivery quantity, is not POD quantity.
question:
1) how to change the billing quantity from POD quantity to delivery quantity?
2) If use delivery quantity, how to make the delivery status to close?
thanks your help.
Cindylan

Hi,
May I know the reason for your requirement? I believe customer has to pay only for the material received and that data will be correct only in POD qty than delivery qty. Otherwise, you can deactivate POD function through delivery item category.
POD qty = Delivery qty +/- Difference qty. Please try giving difference qty as zero.
Regards,
P Gomatheeswaran

Difference in Quantity and amount between PO and invoice

Dear Experts,
In my implementation, the customer puts water in the finished material BOM and wants to issue it to the production. So we made a fake PO with the required quantity and received its quantity in the inventory. The problem faces us when the monthly water invoice comes from the water company and we want to invoice in "MIRO" with reference to the purchase order. Always the quantity and amount in the incoming invoice are different from the ones in the purchase order. Please, Advise.
Thanks,
Magdy.

Hi all ;
I think that you procure water which is used your BOM. You get invoices periodically but there is inconsistency between PO and Invoice quantity and amount.
You can benefit from M8 system messages , i created a document M8 messages for incoming invoices with tolerances that might be helpful.
If it is used in BOM, i do not think so relation pipeline material process...
Regards.
M.Ozgur Unal

Quantity and Unit Rate control on WBS Elements

Dear All,
Please let me know, is there any standard process, where my client need to have control over Quantity and Unit Rate of each WBS Element.
Regards,
Bhadra

Hi Amit,
Actually we are doing Detailed Cost Planning, where we maintain Period wise Planned Quantity and Unit Price. So My need control over those planned quantity and rate in addition to the Budget check.
For example: WBS-1 is having planned quantity of 100 with 10 Rs as unit Price.
In this case my Budget is 1000 Rs and assume that we have released the entire Budget i.e., 1000
So whenever we create a PR/PO/Service order system should check ( QTY-100, Rate-10 and Released Budget-1000) with planned values.
At any point in time the procurement should not happen more than planned Qty/Rate/Release Budget amount.
I think now you are clear about my requirement...
Regards,
Bhadra

Lack of Integrity and Competence from Verizon's customer service/billing

I recently made a trip to the DR and as such needed global communication for the duration of my trip. Ahead of my trip I requested the service with customer service with a guarantee that the service would be billed only for duration that I requested. My billing for last month, June, reflected just the opposite. Verizon charged me yet another $100 for the month of June.
I called customer service to request billing corrective action to which I was told that I had two choices. One, pay the current amount 300+ and wait for a refund or two, pay the actual bill and allow the refund to balance itself out. I was assured that the latter would not result in my account falling into default.
I just received July's billing to which the $100 credit was applied but my account was placed into default. I called customer service once again to rectify their mistake. My request was not to refund me immediately, rather to take my account out of default. I was told by several departments, billing, service, and plan service, that they would NOT make good on my account. Further, I was told that unless I paid the past due balance, that is a result of their mis-billing, that my account would face interruption.
I have been with Verizon for more than 6 years now and have never been in default or past due status. I have never had such an incompetent experience with Verizon. The lack of integrity that was demonstrated resulted in me stating that Verizon would loose a valued and loyal customer to which they replied "we;re sorry you feel this way."
I am extremely dissapointed in this particular service and the lack of integrity that was demonstrated. If this is how they deal with mistakes that they make, then I willnot want to continue with their service.
I thought that I'd share my story so that others may be aware in hopes to avoid such dishonesty and incompetence.

ppepelepeuw2,
Morning!
I'd like to help with this situation and clear up any frustration. It does sound like your trip crossed the billing cycle, which would cause the statement to show that data feature charge until removed and prorated. Please PM me your name and mobile number if you would like more assistance with this concern.
Thank you!

In BI SD how to get Sales Document wise Order Delivery and balance Quantity

We are on the verge of SAP BI implementation. We are facing a problem as in BI we have to
show Sales Order wise - Order Quantity then associated all the deliveries and the Quantity delivered
and finally Billed Quantity
Format Required is
Order No Order Qty Delivery Qty Billed Qty
We are using 0sd_c03 cube here Order , delivery and Billing come as separate Line items
Now bringing them to one line item is a chellange for us
can any body help us
Thanks
Shivani

Hi,
Merging of Order, delivery and billing information is not so easy.
In ECC we have a new datasource for Open order quntity against delivery available check those datasources once may be useful.
[Extraction SD Sales: Order Delivery|http://help.sap.com/saphelp_nw04/helpdata/en/21/ca6d07d5b807459ec8957dad97c179/frameset.htm]
--> This datasouce provides information regarding order qty, delivered qty and status. But no billing related information available.
--> Pull billing information into a separate datasource and merge using sales doc no (with reference doc no in billing). to get billing related info.
--> Multiple orders can be billed together, so distribution may not be correct. check ...
Hope it helps
Srini

Accounts Receivable Report: Customer Wise Ageing Analysis report -FI module

Hi Gurus,
             Can anyone help me in providing standard report(source code) or already done sample report(source code) for Accounts Receivable Report: Customer Wise Ageing AnalysisThis is in FI Module. Though it is FI Module we need to fetch details related to Sales Module, and the days should be <0     30     60     90     120     180     365     >365
It is urgent I need to deliver this report by this week end.
Please help me . Waiting for your reply.
Points Rewarded for help rendered and I would personally send a good gift if you can help me
Yours Truly,
Rajiv Christopher.
Edited by: Rajiv Christopher on Apr 2, 2008 11:33 AM

Hi,
i am attaching aging report.
see if this is useful to you.
REPORT ZFUS0102 MESSAGE-ID OA
                LINE-SIZE 270.
Title:      GR/IR AGING REPORT
Date:       January 2001
TABLES: DISVARIANT, EKPO.
TYPE-POOLS: SLIS.
Tables
TABLES:
BSIS,
EKKO.
working table
DATA: BEGIN OF RTAB OCCURS 0,
         HKONT   LIKE BSIS-HKONT,
         ZUONR   LIKE BSIS-ZUONR,
         BUDAT   LIKE BSIS-BUDAT,
         SHKZG   LIKE BSIS-SHKZG,
         DMBTR   LIKE BSIS-DMBTR,
         PRCTR   LIKE BSIS-PRCTR,
      END OF RTAB.
DATA: BEGIN OF WTAB OCCURS 0,
         ZUONR(2) TYPE N,
         PRCTR   LIKE BSIS-PRCTR,
         DAYS(4) TYPE P,
         DMBTR   LIKE BSIS-DMBTR,
      END OF WTAB.
DATA: BEGIN OF PTAB OCCURS 0,
         ZUONR(2),
         PRCTR   LIKE BSIS-PRCTR,
         AMT30   LIKE BSIS-WRBTR,
         AMT60   LIKE BSIS-WRBTR,
         AMTPL   LIKE BSIS-WRBTR,
         TOTAL   LIKE BSIS-WRBTR,
      END OF PTAB.
PARAMETERS: COMPANY LIKE BSIS-BUKRS OBLIGATORY,
             ACCT    LIKE BSIS-HKONT OBLIGATORY,
             DATE    LIKE SY-DATUM OBLIGATORY.
SELECT-OPTIONS: S_EKORG FOR EKKO-EKORG.
PARAMETERS: P_VARI LIKE DISVARIANT-REPORT.
DATA: WS-AMT30 LIKE BSIS-WRBTR.
DATA: WS-AMT60 LIKE BSIS-WRBTR.
DATA: WS-AMTPL LIKE BSIS-WRBTR.
DATA: TITLE(21) VALUE 'GR/IR Aging Report'.
DATA: LIN TYPE I.
DATA: GX_VARIANT LIKE DISVARIANT,
      G_VARIANT LIKE DISVARIANT.
DATA: LAYOUT   TYPE SLIS_LAYOUT_ALV,
       L_F      TYPE SLIS_T_FIELDCAT_ALV   WITH HEADER LINE,
       GROUP    TYPE SLIS_T_SP_GROUP_ALV   WITH HEADER LINE,
       COLOR    TYPE SLIS_T_SPECIALCOL_ALV WITH HEADER LINE.
DATA: LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
       LS_LINE TYPE SLIS_LISTHEADER,
       T_EVENTS   TYPE SLIS_T_EVENT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
INITIALIZATION.
PERFORM EVENTTAB_AUFBAUEN USING T_EVENTS[].
PERFORM VARIANT_INIT.
Get default variant
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            I_SAVE     = 'A'
       CHANGING
            CS_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 0.
    P_VARI = GX_VARIANT-VARIANT.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM VARIANT_INPUTHELP_F14.
START-OF-SELECTION.
LS_LINE-TYP = 'S'.
WRITE SY-DATUM TO LS_LINE-INFO DD/MM/YY.
WRITE SY-UZEIT TO LS_LINE-INFO+10.
WRITE SY-UNAME TO LS_LINE-INFO+20.
WRITE TITLE    TO LS_LINE-INFO+30.
APPEND LS_LINE TO LT_TOP_OF_PAGE.
PERFORM FIELDS.
IF NOT P_VARI IS INITIAL.
    PERFORM PAI_OF_SELECTION_SCREEN.
ELSE.
    CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
         EXPORTING
              I_DIALOG            = ' '
              I_USER_SPECIFIC     = 'A'
              I_DEFAULT           = ' '
        I_TABNAME_HEADER    =
        I_TABNAME_ITEM      =
              IT_DEFAULT_FIELDCAT = L_F[]
              I_LAYOUT            = LAYOUT
         IMPORTING
        E_EXIT              =
              ET_FIELDCAT         = L_F[]
        ET_SORT             =
        ET_FILTER           =
         CHANGING
              CS_VARIANT          = DISVARIANT
         EXCEPTIONS
              WRONG_INPUT         = 1
              FC_NOT_COMPLETE     = 2
              NOT_FOUND           = 3
              PROGRAM_ERROR       = 4
              OTHERS              = 5.
ENDIF.
Decide which tables to access.
PERFORM MAIN_SELECT.
MOVE TITLE TO LAYOUT-WINDOW_TITLEBAR.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM      = 'ZFUS0102'
            I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
            IS_LAYOUT               = LAYOUT
            IT_FIELDCAT             = L_F[]
            IT_SPECIAL_GROUPS       = GROUP[]
            I_SAVE                  = 'A'
            IS_VARIANT              = G_VARIANT
            IT_EVENTS               = T_EVENTS
       TABLES
            T_OUTTAB                = PTAB
       EXCEPTIONS
            PROGRAM_ERROR           = 1
            OTHERS                  = 2.
      FORM FIELDS                                                   *
FORM FIELDS.
L_F-FIELDNAME     = 'ZUONR'.
L_F-OUTPUTLEN     = 6.
L_F-SELTEXT_L     = 'SERIES'.
L_F-REPTEXT_DDIC = 'SERIES'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
APPEND L_F. CLEAR L_F.
L_F-FIELDNAME     = 'PRCTR'.
L_F-OUTPUTLEN     = 10.
L_F-SELTEXT_L     = 'PROFIT CTR.'.
L_F-REPTEXT_DDIC = 'PROFIT CTR.'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
APPEND L_F. CLEAR L_F.
L_F-FIELDNAME     = 'AMT30'.
L_F-SELTEXT_L     = '30 DAYS'.
L_F-REPTEXT_DDIC = '30 DAYS'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
L_F-REF_TABNAME   = 'BSIS'.
L_F-REF_FIELDNAME = 'WRBTR'.
L_F-DO_SUM        = 'X'.
APPEND L_F. CLEAR L_F.
L_F-FIELDNAME     = 'AMT60'.
L_F-SELTEXT_L     = '60 DAYS'.
L_F-REPTEXT_DDIC = '60 DAYS'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
L_F-REF_TABNAME   = 'BSIS'.
L_F-REF_FIELDNAME = 'WRBTR'.
L_F-DO_SUM        = 'X'.
APPEND L_F. CLEAR L_F.
L_F-FIELDNAME     = 'AMTPL'.
L_F-SELTEXT_L     = '60+ DAYS'.
L_F-REPTEXT_DDIC = '60+ DAYS'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
L_F-REF_TABNAME   = 'BSIS'.
L_F-REF_FIELDNAME = 'WRBTR'.
L_F-DO_SUM        = 'X'.
APPEND L_F. CLEAR L_F.
L_F-FIELDNAME     = 'TOTAL'.
L_F-SELTEXT_L     = 'TOTAL'.
L_F-REPTEXT_DDIC = 'TOTAL'.
L_F-REF_TABNAME   = 'PTAB'.
L_F-SP_GROUP      = 'A'.
L_F-REF_TABNAME   = 'BSIS'.
L_F-REF_FIELDNAME = 'WRBTR'.
L_F-DO_SUM        = 'X'.
APPEND L_F. CLEAR L_F.
ENDFORM.
      FORM MAIN_SELECT                                              *
FORM MAIN_SELECT.
SELECT HKONT ZUONR BUDAT SHKZG DMBTR PRCTR
       INTO TABLE RTAB
       FROM BSIS
       WHERE BUKRS = COMPANY
       AND   HKONT = ACCT.
IF SY-SUBRC = 0.
    SORT RTAB.
    PERFORM PROCESS_RTAB.
    PERFORM PROCESS_WTAB.
ENDIF.
ENDFORM.                    " MAIN SELECT
      FORM VARIANT_INPUTHELP_F14                                    *
FORM VARIANT_INPUTHELP_F14.
DATA: G_EXIT(1) TYPE C.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            IS_VARIANT          = G_VARIANT
            I_SAVE              = 'A' " g_save
          it_default_fieldcat =
       IMPORTING
            E_EXIT              = G_EXIT
            ES_VARIANT          = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 2.
    MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF G_EXIT = SPACE.
      P_VARI = GX_VARIANT-VARIANT.
    ENDIF.
ENDIF.
ENDFORM.
      FORM USER_COMMAND                                             *
--> UCOMM                                                         *
--> SELFIELD                                                      *
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE
SLIS_SELFIELD.
IF UCOMM EQ '&IC1'.
    IF SELFIELD-TABINDEX <= 0.
      MESSAGE S108.
      EXIT.
    ENDIF.
IF SELFIELD-SEL_TAB_FIELD CS 'LIFNR'.
    SET PARAMETER ID 'LIF' FIELD SELFIELD-VALUE.
    CALL TRANSACTION 'XK02'.
ELSE.
    IF SELFIELD-SEL_TAB_FIELD CS 'VEND'.
      SET PARAMETER ID 'LIF' FIELD SELFIELD-VALUE.
      CALL TRANSACTION 'FBL1'.
    ENDIF.
ENDIF.
    CLEAR SY-UCOMM. CLEAR UCOMM.
ENDIF.
ENDFORM.
      FORM TOP_OF_PAGE                                              *
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            IT_LIST_COMMENTARY = LT_TOP_OF_PAGE.
ENDFORM.
      FORM EVENTTAB_AUFBAUEN                                        *
--> P_T_EVENTS                                                    *
FORM EVENTTAB_AUFBAUEN USING P_T_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = P_T_EVENTS.
READ TABLE P_T_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                                                 INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_T_EVENTS.
ENDIF.
ENDFORM.                               " EVENTTAB_AUFBAUEN
      FORM PAI_OF_SELECTION_SCREEN                                  *
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_VARI TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = 'A' " g_save
         CHANGING
              CS_VARIANT = GX_VARIANT.
    G_VARIANT = GX_VARIANT.
ELSE.
    PERFORM VARIANT_INIT.
ENDIF.
ENDFORM.                               " PAI_OF_SELECTION_SCREEN
      FORM VARIANT_INIT                                             *
FORM VARIANT_INIT.
CLEAR G_VARIANT.
G_VARIANT-REPORT = 'ZFUS0102'.
ENDFORM.                               " VARIANT_INIT
*&      Form PROCESS_RTAB
      text
--> p1        text
<-- p2        text
FORM PROCESS_RTAB.
DATA TLNS TYPE I.
DESCRIBE TABLE S_EKORG LINES TLNS.
LOOP AT RTAB.
    IF TLNS GT 0.
      SELECT SINGLE EKORG FROM EKKO INTO EKKO-EKORG
        WHERE EBELN = RTAB-ZUONR(10).
      CHECK EKKO-EKORG IN S_EKORG.
    ENDIF.
    IF NOT RTAB-BUDAT > DATE.
      MOVE RTAB-ZUONR(2) TO WTAB-ZUONR.
      COMPUTE WTAB-DAYS = DATE - RTAB-BUDAT.
      IF RTAB-SHKZG = 'H'.
        WTAB-DMBTR = RTAB-DMBTR * -1.
      ELSE.
        WTAB-DMBTR = RTAB-DMBTR * 1.
      ENDIF.
      MOVE RTAB-PRCTR TO WTAB-PRCTR.
      APPEND WTAB.
    ENDIF.
ENDLOOP.
FREE RTAB.
ENDFORM.                    " PROCESS_RTAB
*&      Form PROCESS_WTAB
      text
--> p1        text
<-- p2        text
FORM PROCESS_WTAB.
SORT WTAB BY ZUONR PRCTR DAYS.
LOOP AT WTAB.
    PTAB-ZUONR = WTAB-ZUONR.
    PTAB-PRCTR = WTAB-PRCTR.
    AT END OF DAYS.
      SUM.
      IF WTAB-DAYS > 60.
        WS-AMTPL = WS-AMTPL + WTAB-DMBTR.
      ELSE.
        IF WTAB-DAYS > 30.
          WS-AMT60 = WS-AMT60 + WTAB-DMBTR.
        ELSE.
          WS-AMT30 = WS-AMT30 + WTAB-DMBTR.
        ENDIF.
      ENDIF.
    ENDAT.
    AT END OF PRCTR.
      PTAB-AMTPL = WS-AMTPL.
      PTAB-AMT30 = WS-AMT30.
      PTAB-AMT60 = WS-AMT60.
      COMPUTE PTAB-TOTAL = PTAB-AMTPL + PTAB-AMT30 + PTAB-AMT60.
      APPEND PTAB.
      WS-AMTPL = 0.
      WS-AMT30 = 0.
      WS-AMT60 = 0.
    ENDAT.
ENDLOOP.
SORT PTAB BY ZUONR PRCTR.
ENDFORM.                    " PROCESS_WTAB
regards,
Sindhu

Employee and customer wise cost

Hello Experts
Below are my business scenario
1.I want capture the employee wise cost so What could be best way to capture the employee wise expense in the below method
    Employee as cost center
    Employee as Vendor
    Employee as internal order
   IF anybody provide me advantages and disadvantage it will be better understanding
2. Another one of my requirement in my business scenario customer group wise COPA report with net profit level
Here GP level I will get it from my billing document(Revenue – COGS), customer wise expenses I am going to capture through the cost center
finally I want to settle this cost to customer group (COPA)
Is it Possible ?
Thanks & Regards
Sri.

Hi VS
1. For employee wise expenses, you can refer the document I contributed below
http://scn.sap.com/docs/DOC-50141
The document explains how you can use Statistical IOs for this.. You can also name your Statistical Internal Orders as per the Employee Number, but I used a slightly different approach to be more scaleable
2. For customer wise expenses, while you book the expenses in F-02 or FB60, you need to click on the "Prof Segment" and enter the Customer / Product details in it
That ways you can capture the expenses at Customer level in COPA
Br. Ajay M

Customer wise TDS Receivable Report

hi,
Our Client requirement is to get customer wise TDS Receivable Report. As of now they are passing manual entry whenever they get the TDS certificate from the customer.
Is it possible to configure in SAP to pass automatic entry for TDS receivable report.

Dear Vijay
I think there is no configuration for TDS receivable, but we can capture the tax amount in expenses account while sales invoice posting (same as cash discount procedure) and see the report in Tax expenses account.
Regards
Sridhara Rao D
Edited by: Sridhara Rao.D on Oct 1, 2011 3:49 PM

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

Customer wise Billed quantity and Receivables

Similar Messages

Maybe you are looking for